An efficient Stille cross-coupling reaction catalyzed by Pd(OAc)2/DAB-Cy catalytic system

An efficient palladium-catalyzed Stille cross-coupling reaction has been developed. In the presence of 3 mol% of Pd(dba)₂ and 6 mol% of DAB-Cy (1,4-dicyclohexyl-diazabutadiene), various aryl halides (iodides and bromides) were coupled with organotin compounds to afford the corresponding biaryls and alkyne in good to excellent yields. Furthermore, high TONs [turnover numbers, TONs up to 950,000 for the reaction of 1-iodo-4-nitrobenzene and tributyl(phenyl)stannane] for the Stille cross-coupling reaction were observed.     

Evaluation of polymer-supported vinyltin reagents in the Stille cross-coupling reaction

The synthesis of two new vinyltin reagents grafted on an insoluble macroporous polymer is reported. These reagents were used in the palladium-catalyzed Stille cross-coupling reaction with aryl halides. In all reactions, the conversion of the starting aryl halide is high and the amount of organotin by-product is particularly low (at the end of the catalytic run, the amount of Sn is up to 16 ppm in the crude reaction mixture removed of the insoluble polymer, and it is less than 1 ppm in the product purified by chromatography on silica gel).     

Transfer of organic groups to gold using organotin compounds

PhSnMe₃ undergoes transmetallation with [AuCl(EPh₃)] (E = P, As) in refluxing toluene forming [AuPh(EPh₃)] and Me₃SnCl. The analogous ⁿBu derivative does not transmetallate, even under forcing conditions. Similarly, 1-(trimethylstannyl)naphthalene and 1-(trimethylstannyl)-8-iodonaphthalene react with [AuCl(PPh₃)] to give good yields of the corresponding naphthylgold(I) complexes which were spectroscopically and structurally characterised.     

Encapsulation of organotin compounds in metal acetate glasses

Triorganotin halides, oxides and sulphides can be dissolved in molten, mixed-metal acetates at ca 140–160°C without decomposition; quenching provides glasses into which are encapsulated the organotin species. Halide/acetate and oxide/acetate, but not sulphide/acetate, exchanges occur in the melt. Only partial exchange was found for hindered trineophyl tin chloride [(PhCMe₂CH₂)₃SnCl], in contrast to the complete exchanges observed for the butyl (Bu), phenyl (Ph) and cyclohexyl (Cy) analogues. Complete oxide/acetate exchange was found for (Bu₃Sn)₂O, partial exchange occurred for (Cy₃Sn)₂O, whilst no exchange resulted with bis(trineophyltin) oxide or (Ph₃Sn)₂O. Tin–tin bonds (e.g. as in Ph₃SnSnPh₃) and carbon–tin bonds (even the allyl–Sn bond in Bu₃SnCH₂CH?CH₂) are not affected. The acetate glasses dissolve in aqueous media with release of the organotin species and they have potential as slow-release systems which is currently being investigated.     

Speciation of organotin compounds by tandem mass spectrometry

The collison-induced dissociation of a range of organotin compounds has been examined by tandem (MS–MS) mass spectrometry in order to investigate the potential of the technique for speciation without prior chromatographic separation. Tables of parent–daughte ion relationships are prepared for a group of six closely related compounds. The results obtained are sufficiently characteristic to distinguish between the isolated compounds and to identify the individual components of a simple mixture. This procedure has potential applications for less volatile compounds and for quantitative analysis.     

A new application of imprinted polymers: Speciation of organotin compounds

Molecular imprinting technology has been employed for the first time to prepare a specifically affinity chromatographic stationary phase for speciation purposes. Tributyltin has been chosen as the template molecule and the non-covalent approach has been applied. Three different polymerization methods have been evaluated: (i) a composite material, (ii) a polymer prepared via-Iniferter grafting; (iii) an emulsion polymer. Columns packed with different polymers have been evaluated by liquid chromatography (LC) coupled to inductively coupled plasma mass spectrometry (ICP-MS). The chromatographic conditions as well as the analytical characteristics of the developed method are discussed in this paper. Our findings have shown formation of specific cavities in the grafted Iniferter as well as in the emulsion polymers with the latter achieving resolution of four organotin compounds. Detection limits are similar to those obtained with commercial, but not specific, stationary phases (6 pg for monobutyltin, MBT; 10 pg for both tributyltin, TBT, and triphenyltin, TPhT; and 20 pg for dibutyltin, DBT). The main advantage of this proposed stationary phase is that good recovery is obtained for all species, including MBT. Baseline resolution for TBT and TPhT has also been obtained. The high selectivity of this column prevents matrix interferences. The method has been validated by analyzing two biota reference materials (ERM-CE477 mussel tissue and T-38 oyster tissue).     

Use of polymer-supported phenyltin for the creation of aryl-aryl or aryl-heteroaryl bonds via Stille cross-coupling reactions

An insoluble polymer-supported phenyltin reagent was successfully used in Stille cross-coupling reactions with aryl- and heteroaryl-halides. Cross-coupling products were isolated in good to high yields with very low contamination by tin and palladium residues after removal of the residual supported organotin halide. The regeneration and recyclability of the supported phenyltin reagent were also examined and proved to be possible, but required palladium cleaning of the grafted polymer to be efficient along 4 cycles when Pd(PPh₃)₄ was used as catalyst.     

Polarographic behaviour of some organotin(IV) compounds in dimethyl sulphoxide

The differential pulse polarographic behaviour in dimethyl sulphoxide (DMSO) of 14 organotin(IV) compounds having the general formula R₃SnX (R = Me, Ph; X^? = NCS^?, N₃^?, N₃^?, NO₃^?, OH^?, NCO^? and OAc^?) and ⁿBu₃SnCl and ⁿBu₂SnCl₂ has been studied. The peak potential was found to depend markedly on the organic group and to a lesser extent on the nature of the anion X. The phenyltin compounds were reduced at lower potentials than the corresponding methyltin compounds. The data obtained could be used for trace determination of these compounds. Linear calibration curves were obtained over the concentration range of 2.8 × 10^?4 to 1.9 × 10^?6 mol dm^?3.     

HPTLC analysis of organotin compounds in preservative solutions and preservative-treated wood

A high-performance thin-layer chromatographic (HPTLC) method is described for the determination of tributyltin compounds (bis(tri-n-butyltin) oxide, TBTO, and tri-n-butyltin naphthenate, TBTN) and their degradation products (dibutyltin and monobutyltin compounds). The organotin compounds are extracted from wood with ethanol containing 0.5% (v/v) of hydrochloric acid and the separation of the defferent kinds of organotin compounds is achieved by thin-layer chromatography. The sample spots are measured using a scanning densitometer after decomposing the organotin compounds to inorganic tin by ultraviolet irradiation and visualization of the spots with pyrocatechol violet. Applications of the method to detection and quantification of organotin compounds in preservative solutions, in recently impregnated wood, and in wood samples from five-year-old window frames are described.     

Relationship of cytotoxic groups in organotin molecules and the effectiveness of the compounds against leukemia

Cytotoxicity of organotin compounds is assessed and their effectiveness against leukemia is discussed. The functional groups attached to the tin atom in organotin compounds control the cytotoxicity of the compound towards the thymus gland. The four organotin moieties which have the greatest toxic effect upon the thymus gland are the tri-n-butyltin, di-n-butyltin, tri-n-propyltin and di-n-octyltin groups. Compounds containing these groups also exhibit the poorest test-control ratio (T/C) values when tested as anti-cancer agents against leukemic mice using NCI protocol.     

A novel cis-chelated Pd(II)-NHC complex for catalyzing Suzuki and Heck-type cross-coupling reactions

A novel Pd(II)-NHC complex, which has a ‘normal’ cis-chelating, bidentate structure is fairly effective in Suzuki and Heck-type cross-coupling reaction to give the products in good to excellent yields in most cases.     

Synthesis and evaluation of molecularly imprinted polymers for organotin compounds: a screening method for tributyltin detection in seawater

The environmental impact of some organotin compounds (OTC) has given particulate importance to analytical studies. This paper reports the first attempt to apply the emerging molecular imprinting technology to this field. Several imprinted polymers have been synthesised by the non-covalent free radical approach using sodium methacrylate (NaMA) or 4-vinylpyridine (4-VP) as monomers in the presence of TBT as template molecule in three different polymerisation media (toluene, acetonitrile and methanol/water). The ability of the polymers synthesised to retain and distinguish TBT from its degradation products has been evaluated and optimized. The results clearly showed the presence of cavities within the polymeric matrix allowing specific recognition of TBT. Cross-reactivity from other Sn species (monobutyltin (MBT), dibutyltin (DBT) and inorganic Sn) has also been evaluated. Rapid and direct differentiation of TBT from its main degradation products in seawater was achieved. The analytical characteristics included linearity (0.05-50 μg l⁻¹), a pre-concentration factor of 150, and a quantification limit of 0.04 μg l⁻¹ for 1 l.     

Selective mono-arylation in palladium-catalyzed cross-coupling reaction of dichlorotriazines with phenylboronate ester derivatives

Palladium-catalyzed cross-coupling reaction between dichlorotriazines and phenylboronate esters produced the mono-arylated triazines selectively and thus,the corresponding phenyltriazine derivatives could be assembled efficiently in moderate to good overall yields(50-80%).     

Biological chemistry of organotin compounds: Interactions and dealkylation by dithiols

In this paper, we review our past and current efforts toward the elucidation of the biological chemistry of organotin compounds. In particular, we cover two prominent aspects of organotin compounds: their reactivity toward biological dithiols, and their degradation (or metabolization) mechanism using a combination of experimental and computational techniques.     

Occurrence and chemical speciation analysis of organotin compounds in the environment: A review

Environmental concerns regarding organotin compounds have increased remarkably in the past 20 years, due in large part to the use of these compounds as active components in antifouling paints [mainly tributyltin (TBT)] and pesticide formulations [mainly triphenyltin (TPhT)]. Their direct introduction into the environment, their bio-accumulation and the high toxicity of these compounds towards “non-target” organisms (for example: oysters and mussels) causes environmental and economic damage around the world. As a consequence, the presence and absence of organotin compounds is currently monitored in a range of environmental matrices (e.g., water, sediment and shellfish) to examine the utility of controls meant to regulate the level of contamination as required in some EC Directives and the Water Framework Directive 2000/60/EC. To evaluate the environmental distribution and fate of these compounds and to determine the effectives of legal provisions adopted by a number of countries, a variety of analytical methods have been developed for organotin determination in the environment. Most of these methods include different steps such as extraction, derivatisation and clean up. The aim of the present review is to evaluate the environmental distribution, fate and chemical speciation of organotin compounds in the environment.     

Palladium-catalyzed cross-coupling reaction of allyl acetates with pinacol aryl- and vinylboronates

Pinacol boronates 2 couple efficiently with allyl acetates 1 in the presence of a palladium catalyst prepared in situ from PdCl₂ and TFP to give the coupled products 3 in moderate to good yields under mild conditions.     

Evaluation of desulfurization procedures for the elimination of sulfur interferences in the organotin analysis of sediments

Different clean-up and desulfurization procedures were compared in order to check their efficiency in eliminating elemental sulfur and organosulfur compounds from sediment extracts. Adsorption column chromatography cannot remove elemental sulfur or organosulfur compounds. Treatment with activated copper powder only removes elemental sulfur, but organosulfur compounds remain in the extract, and phenyltins are partially lost (up to 50%). Ligand exchange chromatography with AgNO₃-coated silica gel as adsorbent effectively removes elemental sulfur and interfering organosulfur compounds from the sediment extract allowing the quantitation of butyltins with recoveries >80%. Since the phenyltin compounds do not survive the desulfurization step, they should be measured in the untreated extract.     

Improving detection limits for organotin compounds in several matrix water samples by derivatization-headspace-solid-phase microextraction and GC-MS

Triethyltin, tributyltin, diphenyltin and triphenyltin were selected as model compounds. The method is based on in situ ethylation and simultaneous headspace-solid-phase microextraction (HS-SPME) and gas chromatographic-mass spectrometry analysis (GC-MS). The extraction procedure was optimized studying some variables such as reaction time, salinity, sample volume and headspace volume. SPME-GC-MS and SPME-GC-FID techniques were compared; quality assurance parameters such as sensitivity, selectivity and precision were established. The proposed procedure showed limits of detection between 0.025 and 1 ng/L. The linearity was in the 0.025-5000 ng/L range. The precision expressed as relative standard deviations (RSD), were below 20%. Real wastewaters and seawaters were analyzed. The method permits controlling legislated annual average values.