Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

New versatile organyltellurium(IV) halides: Synthesis and X-ray structural features of the telluronium tellurolate salts [PhTe(CH3)2]2[TeX6] (X = Cl, Br) and [Ph3Te][PhTeX4] (X = Cl, Br, I)

TeX₄ (X = Cl, Br) react in HCl/HBr with [Ph(CH₃)₂Te]X (X = Cl, Br) to give [PhTe(CH₃)₂]₂[TeCl₆] (1) and [PhTe(CH₃)₂]₂[TeBr₆] (2). The reaction of PhTeX₃ (X = Cl, Br, I) in cooled methanol with [(Ph)₃Te]X (X = Cl, Br, I) leads to [Ph₃Te][PhTeCl₄] (3), [Ph₃Te][PhTeBr₄] (4) and [Ph₃Te][PhTeI₄] (5). In the lattices of the telluronium tellurolate salts 1 and 2, octahedral TeCl₆ and TeBr₆ dianions are linked by telluronium cations through Te?Cl and Te?Br secondary bonds, attaining bidimensional (1) and three-dimensional (2) assemblies. The complexes 3, 4 and 5 show two kinds of Te?halogen secondary interactions: the anion-anion interactions, which form centrosymmetric dimers, and two identical sets of three telluronium-tellurolate interactions, which accomplish the centrosymmetric fundamental moiety of the supramolecular arrays of the three compounds, with the tellurium atoms attaining distorted octahedral geometries. Also phenyl C-H?halogen secondary interactions are structure forming forces in the crystalline structures of compounds 3, 4 and 5.     

Mixed-metal single-molecule magnets: Syntheses, structure, and magnetic properties of [Mn8Fe4O12(O2CR)16(H2O)4] (R = CH2Cl, CH2Br, CHCl2)

Three mixed-metal single-molecule magnets containing [Mn₈Fe₄O₁₂]¹⁶⁺ cores are synthesized and characterized. The reaction of FeCl₂·4H₂O with KMnO₄ and RCOOH (R = CH₂Cl, CH₂Br) in H₂O gives [Mn₈Fe₄O₁₂(O₂CR)₁₆(H₂O)₄] (R = CH₂Cl (1), CH₂Br (2)) in yields of 43% and 40%, respectively. Treatment of complex 1 with an excess of CHCl₂COOH in CH₂Cl₂ gives [Mn₈Fe₄O₁₂(O₂CCHCl₂)₁₆(H₂O)₄]·CH₂Cl₂·10H₂O (3·CH₂Cl₂·10H₂O) in a yield of 83%. The X-ray structure analysis reveals that all three complexes consist of a trapped-valence dodecanuclear core comprising 4Mn^III, 4Fe^III, and 4Mn^IV ions. DC magnetic susceptibility and magnetization measurements indicate that all three complexes exhibit intramolecular antiferromagnetic interaction, resulting in an S = 4 ground state. In addition, frequency-dependent out-of-phase AC magnetic susceptibility signals at low temperature for complexes 1, 2, and 3 are indicative of their single-molecule magnetism behavior.     

The reaction of the group-13 alkyls ER3 (E = Al, Ga, In; R = CH2t-Bu, CH2 SiMe3) with the platinum-complex [(dcpe)Pt(H)(CH2t-Bu)]

The reactions of the sterically demanding group-13 alkyls ER₃ (E = Al, Ga, In; R = CH₂t-Bu, CH₂SiMe₃) with the platinum-complex [(dcpe)Pt(H)(CH₂t-Bu)] were re-investigated. The bimetallic compounds [(dcpe)Pt(ER₂)(R)] (3: E = Ga, R = CH₂SiMe₃; 5: E = In, R = CH₂t-Bu; dcpe = bis(dicyclohexylphosphino)ethane) with direct σ(Pt-E) bonds were obtained by oxidative addition of an E-C bond to the coordinatively unsaturated fragment [(dcpe)Pt] produced in situ by thermolysis of the starting complex [(dcpe)Pt(CH₂t-Bu)(H)]. The single crystal structure determination reveals a Pt-Ga bond length of 2.376(2) Å and a Pt-In bond length of 2.608(1) Å. All new compounds were characterised by elemental analysis, ³¹P and ¹⁹⁵Pt NMR spectroscopy. Interestingly, the Pt-Ga compound 3 slowly transforms into the platinum alkyl/hydride isomer {(dcpe)Pt(μ₂-H)[CH₂Si(CH₃)₂ CH₂Ga(CH₂SiMe₃)₂]} (4) during crystallization from solution at room temperature. The X-ray single crystal structure analysis revealed both complexes 3 and 4 coexisting in the unit cell in a 1:1 relation. The inaccessibility of analytically pure samples of the Pt-Al complex {(dcpe)Pt[Al(CH₂t-Bu)₂](CH₂t-Bu)} (6), postulated as intermediate of the reaction of [(dcpe)Pt(H)(CH₂t-Bu)] with Al(CH₂t-Bu) on the basis of ³¹P and ¹⁹⁵Pt NMR data, is attributed to an enhanced tendency to isomerisation into the alkyl/hydride Pt/Al congener of 4. A brief DFT analysis of the bonding situation of the model complex [(dhpe)Pt(GaMe₂)(Me)] (1M) revealed, that the contribution of π(Pt-Ga) back-bonding is negligible.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Reverse Kocheshkov reaction - Redistribution reactions between RSn(OCH2CH2NMe2)2Cl (R = Alk, Ar) and PhSnCl3: Experimental and DFT study

A series of organotin compounds bearing two intramolecular N → Sn coordination bonds RSn(OCH₂CH₂NMe₂)₂Cl (R = Me (4), n-Bu (5), Mes (6)) were synthesized in good yields. These compounds as well as 2 (R = Ph) react with PhSnCl₃ to give redistribution products RPhSnCl₂ and (Me₂NCH₂CH₂O)₂SnCl₂ (3). The direction of redistribution reactions is reverse to Kocheshkov reaction. DFT calculations have shown that the driving force of the reactions is formation of intramolecular N → Sn coordination bonds in (RO)₂SnCl₂ (3), the Lewis acid stronger than RSn(OR)₂Cl (2, 4-6). The mechanism of the redistribution reaction between 2 and PhSnCl₃ consists of two steps: (1) initial exchange of OCH₂CH₂NMe₂ and Cl to give PhSn(OCH₂CH₂NMe₂)Cl₂ (7) followed by (2). Ph and OCH₂CH₂NMe₂ exchange.     

X-ray and multinuclear NMR study of the mixed aggregate [(Ph2P(O)N(CH2Ph)CH3) · LiOC6H2-2,6-{C(CH3)3}2-4-CH3) · C7H8]2: a model for the directed metalation of phosphinamides

The addition of LiBuⁿ to a toluene solution of Ph₂P(O)N(CH₂Ph)CH₃1 and 2,6-di-tert-butyl-4-methylphenol 5 leads to the formation of the mixed dimer [(Ph₂P(O)N(CH₂Ph)CH₃) · LiOC₆H₂-2,6-{C(CH₃)₃}₂-4-CH₃) · C₇H₈]₂6. The single crystal X-ray structure shows that two lithium aryloxide moieties dimerize giving rise to a Li₂O₂ core in which each lithium atom is additionally coordinated to a phosphinamide 1 ligand. The multinuclear magnetic resonance study (¹H, ⁷Li, ¹³C, ³¹P) indicates that the solid-state structure is preserved in toluene solution. Complex 6 may be considered as a model for the pre-complexation step preceding the metalation of phosphinamides by an organolithium base.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Two-stage formation of chloro (N-o-chlorobenzamido-meso-tetraphenylporphyrinato) zinc(II) methylene chloride solvate: Zn(N-NHCO(o-Cl)C6H4-tpp)Cl · CH2Cl2

The coordinating properties of N-o-chlorobenzamido-meso-tetraphenylporphyrin (N-NHCO(o-Cl)C₆H₄-Htpp; 11) have been investigated for the Zn²⁺ ion. Insertion of Zn results in the formation of the zinc complex Zn(N-NCO(o-Cl)C₆H₄-tpp)(MeOH) · MeOH (12 · MeOH). The diamagnetic 12 · MeOH can be transformed into the diamagnetic Zn(N-NHCO(o-Cl)C₆H₄-tpp)Cl · CH₂Cl₂ (13 · CH₂Cl₂) in a reaction with aqueous hydrogen chloride (2%). X-ray structures for 12 · MeOH and 13 · CH₂Cl₂ have been determined. The coordination sphere around the Zn²⁺ ion in 12 · MeOH is a distorted trigonal bipyramid with N(2), N(4) and O(2) lying in the equatorial plane, whereas for the Zn²⁺ ion in 13 · CH₂Cl₂, it is a square-based pyramid in which the apical site is occupied by the Cl(1) atom.     

4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of tungsten (R′O)2(ArN)WCH-SiR2-CHW(NAr)(OR′)2 (R = Me, Ph) and (R′O)2(ArN)WCH-SiMe2SiMe2-CHW(NAr)(OR′)2

Bimetallic alkylidene complexes of tungsten (R′O)₂(ArN)WCH-SiR₂-CHW(NAr)(OR′)₂ (R = Me (1), Ph (2)) and (R′O)₂(ArN)WCH-SiMe₂SiMe₂-CHW(NAr)(OR′)₂ (3) (Ar = ; R′ = CMe₂CF₃) have been prepared by the reactions of divinyl silicon reagents R₂Si(CHCH₂)₂ with known alkylidene compounds R′′-CHMo(NAr)(OR′)₂. (R′′ = Bu^t, PhMe₂C) Complexes 1-3 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1-3 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and 3 and predominant cis-units content in the case of 2.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Dihalogen-halogenomethyl complexes of indium(III) X2InCH2X (X = Br, I): Simultaneous coordination of soft and hard ligands

Halogenomethyl-dihalogen-indium(III) compounds X₂InCH₂X (X = Br, I) obtained from indium monohalides and methylene dihalides were reacted with the soft donor ligands dialkylsulfides, R₂S (R = CH₃, CH₂Ph) to afford the corresponding dialkylsulfonium methylide complexes of InX₃, X₃InCH₂SR₂ (X = Br, R = CH₃, 1; X = I, R = CH₃, 2; X= I, R = CH₂Ph, 3). Compound 1 was reacted with the hard donor ligands dimethylsulfoxide or triphenylphosphine oxide to give the corresponding 1:1 adduct, Br₃(L)InCH₂S(CH₃)₂ (L = (CH₃)₂SO, 4; L = (C₆H₅)₃PO, 5). Compounds 1-5 were fully characterized in solution by NMR spectroscopy and in the solid state by X-ray methods.     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.