Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

The first bidentate phosphanylborohydride: Synthesis, structure, and reactivity towards [CpFe(CO)2I]

Deprotonation of the phosphane-borane adduct rac/meso-(HP(BH₃)(Ph)CH₂)₂ (2) with KH provides facile access to the bidentate phosphanylborohydride rac/meso-K₂[(P(BH₃)(Ph)CH₂)₂] (3). Treatment of 3 with two equivalents of [CpFe(CO)₂I] gives the dinuclear complex rac/meso-[(CpFe(CO)₂)₂-μ-(P(BH₃)(Ph)CH₂)₂] (4). Single crystals of the pure diastereomers meso-2, meso-3(thf)₄, and rac-4 have been grown from toluene/pentane, diethyl ether/thf, and benzene/pentane, respectively. The molecular structures of all three compounds have been determined by X-ray crystallography.     

New ferrocenylmethylphosphines - Preparation, characterisation and coordination chemistry of PH(CH2Fc)2, P(CH2Fc)3 [Fc = Fe(η-C5H5)(η-C5H4)] and their derivatives

The new ferrocenylmethylphosphines PH(CH₂Fc)₂ (1) [Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)] and P(CH₂Fc)₃ (2) and the phosphonium salt [P(CH₂Fc)₃(CH₂OH)]I (3) were synthesised from P(CH₂OH)₃ and [FcCH₂NMe₃]I. [P(CH₂Fc)(CH₂OH)₃]Cl (4) was obtained from P(CH₂Fc)(CH₂OH)₂, CH₂O and HCl. The new phosphines and phosphonium salts were fully characterised by NMR and IR spectroscopy and MS. [Mo(CO)₆] reacts with 1 to give [Mo(CO)₅{PH(CH₂Fc)₂}] (5) in high yield, but attempts to employ 2 as a ligand failed. The reaction of [P(CH₂Fc)₃(CH₂OH)]I (3) and [PH(CH₂Fc)₃]I (obtained in situ from 3 and Na₂S₂O₅) with [WI₂(CO)₃(NCMe)₂] gave the complex salts [P(CH₂Fc)₃(CH₂OH)][WI₃(CO)₄] (6) and [PH(CH₂Fc)₃][WI₃(CO)₄] (7), respectively. [P(CH₂Fc)₄]I (8) was synthesized from PH₂CH₂Fc and [FcCH₂NMe₃]I. Crystal structures were obtained for 1, 3-8.     

Chemistry of diphenyltetrafluorophosphazene: Reactions with dilithiated diols

Reaction of gem-diphenyltetrafluorophosphazene, [1,1-(C₆H₅)₂]P₃N₃F₄ (1) with LiO(CH₂)₃OLi resulted in the formation of four products, spiro-{3,3-[O(CH₂)₃O]}[1,1-(C₆H₅)₂]P₃N₃F₂ (2), ansa-{3,5-[O(CH₂)₃O]}[1,1-(C₆H₅)₂P₃N₃F₂] (3), bridged-[1,1-(C₆H₅)₂N₃P₃F₃][O(CH₂)₃O][1,1-(C₆H₅)₂N₃P₃F₃] (4) and dangling-[HO(CH₂)₃O][1,1-(C₆H₅)₂P₃N₃F₃] (5) derivatives of 1, among which compound 5 was found to be the major product. Reaction of 1 with the dilithiated ferrocene derived diol, FcCH₂P(S)(CH₂OLi)₂ resulted in the formation of two isomers of ansa substituted fluorophosphazenes namely endo-[1,1-(C₆H₅)₂]{3,5-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (6) and exo-[1,1-(C₆H₅)₂]{3,5-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (7). These were formed along with the spiro isomer [1,1-(C₆H₅)₂]{3,3-[FcCH₂P(S)(CH₂O)₂]}P₃N₃F₂ (8) the dangling derivative [1,1-(C₆H₅)₂P₃N₃F₃][OCH₂(FcCH₂)P(S)CH₂OH] (9) and the bridged compound [1,1-(C₆H₅)₂P₃N₃F₃][OCH₂(FcCH₂)P(S)CH₂O][1,1-(C₆H₅)₂P₃N₃F₃] (10). All compounds were separated by column chromatography and characterized by ¹H, ³¹P{¹H}, ¹⁹F NMR, mass spectra and elemental analysis. The spirocyclic compound 8 was also characterized by X-ray crystallography.     

The new dispirobino and dispiroansa spermine derivatives of cyclotriphosphazenes

In this study, the crystal structures of the dispiroansa spermine derivatives of cyclotriphosphazene are characterised for the first time. The reaction of spiro-, gem-disubstituted cyclotriphosphazene derivatives, N₃P₃Cl₄R₂ [R = NHPh, (HN(CH₂)₃NH)_0.5, (OCH₂C(CH₃)₂CH₂O)_0.5], (1–3), with spermine (4), in aprotic solvents such as CH₂Cl₂ results in a series of dispirobino spermine derivatives of cyclotriphosphazene (5a, 6a, 7), namely spermine bridged compounds. Whereas, in protic solvents such as CHCl₃ give, dispiroansa derivatives (8–10) namely tetracyclic cyclotriphosphazene. The new series of dispirobino and dispiroansa spermine derivatives of cyclotriphosphazene (5a, 6a, 7–10) have been characterised by elemental analysis, mass spectrometry, X-ray (for 5a, 8, 10) and ¹H, ³¹P NMR spectroscopies.     

Facile syntheses, structural characterizations, and isomerization of disiloxane-1,3-diols

In the hydrolysis reaction of dichlorosilanes having an intramolecular coordinating atom, dcisiloxane-1,3-diols, [(OH){o-(CH₃)₂NCH₂-C₆H₄}RSi]₂O(R=CH₂CH (1), C₆H₅ (2), o-(CH₃)₂NCH₂C₆H₄ (3), Me (4)), were obtained in high yields. The results of the crystal structure analyses of meso-2, rac-2a, rac-2b and 3 are reported. They showed strong intramolecular hydrogen bondings between the hydroxy group and the nitrogen atom. We have also found that the diastereomeric isomerization of meso-2 to rac-2 in CDCl₃ solvent containing moisture occurred to result in the 55:45 equilibrium mixtures of the isomers and vice versa.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Palladium(II)-allyl complexes containing chiral N-donor ferrocenyl ligands

A study of the reactivity of enantiopure ferrocenylimine (S_C)-[FcCHN-CH(Me)(Ph)] {Fc =  (η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-} (1a) with palladium(II)-allyl complexes [Pd(η³-1R¹,3R²-C₃H₃)(μ-Cl)]₂ {R¹ = H and R² = H (2), Ph (3) or R¹ = R² = Ph (4)} is reported. Treatment of 1a with 2 or 3 {in a molar ratio Pd(II):1a = 1} in CH₂Cl₂ at 298 K produced [Pd(η³-3R²-C₃H₄){FcCHN-CH(Me)(Ph)}Cl] {R² = H (5a) or Ph (6a)}. When the reaction was carried out under identical experimental conditions using complex 4 as starting material no evidence for the formation of [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(Ph)}Cl] (7a) was found. Additional studies on the reactivity of (S_C)-[FcCHN-CH(R³)(CH₂OH)] {R³ = Me (1b) or CHMe₂ (1c)} with complex 4 showed the importance of the bulk of the substituents on the palladium(II) allyl-complex (2-4) or on the ferrocenylimines (1) in this type of reaction. The crystal structure of 5a showed that: (a) the ferrocenylimine adopts an anti-(E) conformation and behaves as an N-donor ligand, (b) the chloride is in acis-arrangement to the nitrogen and (c) the allyl group binds to the palladium(II) in a η³-fashion. Solution NMR studies of 5a and 6a and [Pd(η³-1,3-Ph₂-C₃H₃){FcCHN-CH(Me)(CH₂OH)}Cl] (7b) revealed the coexistence of several isomers in solution. The stoichiometric reaction between 6a and sodium diethyl 2-methylmalonate reveals that the formation of the achiral linear trans-(E) isomer of Ph-CHCH-CH₂Nu (8) was preferred over the branched derivative (9). A comparative study of the potential utility of ligand 1a, complex 5a and the amine (S_C)-H₂N-CH(Me)(Ph) (11) as catalysts in the allylic alkylation of (E)-3-phenyl-2-propenyl (cinnamyl) acetate with the nucleophile diethyl 2-methylmalonate (Nu⁻) is reported.     

Intramolecular hydroamination catalysis using trans-N,N′-dibenzylcyclam zirconium complexes

The syntheses of (Bn₂Cyclam)Zr(NMe₂)₂ (1), (Bn₂Cyclam)Zr(NH^2,6-MePh)Cl (2) and (Bn₂Cyclam)Zr(N^2,6-MePh) (3) are described. The reactivity of 1, 3, (Bn₂Cyclam)Zr(CH₂Ph)₂ (4) and ((C₆H₄CH₂)₂Cyclam)Zr (5) as hydroamination catalysts of aminoalkenes is reported. High conversions of the primary gem-disubstituted aminoalkenes in 5- or 6-member ring N-heterocycles were observed. Reactions of 1, 4 and 5 with CH₂CHCH₂CPh₂CH₂NH₂ gave (Bn₂Cyclam)Zr(NHR)₂ (6) (R = CH₂CPh₂CH₂CHCH₂) that on heating converts sequentially into the mono-ortho-metallated species ((C₆H₄CH₂)BnCyclam)Zr(NHR) (7) and the bis-ortho-metallated ((C₆H₄CH₂)₂Cyclam)Zr (5), simultaneously with the hydroamination product.     

Effect of chain length on the formation of intramolecular and intermolecular products: Reaction of diols with cyclotriphosphazene

The reactions of cyclotriphosphazene, N₃P₃Cl₆ (1), in a 1:1.2 stoichiometry with the sodium derivative of seven diols [ethane- (2a), 1,3-propane- (2b), 1,4-butane- (2c), 1,5-pentane- (2d), 1,6-hexane- (2e), 1,8-octane- (2f) and 1,10-decane- (2g) diol] in THF solution at room temperature have been used to investigate the effect of chain length on the formation of reaction products. Although no new products were found for the reaction of 1 with diols 2a-c compared to those in the literature using other bases and solution conditions, the reactions of 1 with the diols 2d-g gave six different types of products, whose structures have been characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy; ansa compounds N₃P₃Cl₄[O(CH₂)_nO], (5d-5g); single-bridged compounds N₃P₃Cl₅[O(CH₂)_nO]N₃P₃Cl₅(6d-6f); double-bridged compounds N₃P₃Cl₄[O(CH₂)_nO]₂N₃P₃Cl₄ (7d-7g, syn and anti) and triple-bridged compounds, N₃P₃Cl₃[O(CH₂)_nO]₃N₃P₃Cl₃ (8d-f). Where suitable single crystals were obtained, X-ray crystallographic studies confirmed the structures of two ansa compounds (5d and 5f), one single-bridged compound (6e), and five double-bridged compounds (meso-anti for 7d, 7e, 7f and meso-syn for 7d and 7f). ³¹P NMR measurements of the reaction mixtures were used to quantify the formation of products for the reactions 1 with all the diols, 2a-g; it is found that, with increasing chain length of the diol, there is a decrease in the products formed by intramolecular reactions (spiro and ansa derivatives) and a concomitant increase in the amounts of products formed by intermolecular reactions (single-, double- and triple-bridged derivatives) of cyclophosphazene.     

Syntheses, structures and ligand conformations of Cu(II), Co(II) and Ag(I) complexes containing the phosphinic amide ligands

The syntheses, structures and ligand conformations of the complexes trans-Cu(L1)₂(ClO₄)₂, (L1 = N-(2-pyrimidinyl)-P,P-diphenyl-phosphinic amide), 1, [trans-Co(L1)₂(CH₃OH)₂](ClO₄)₂·O(C₂H₅)₂, 2, [trans-Co(L2)₂(H₂O)₂](ClO₄)₂·2CH₃OH, (L2 = N-(2-pyridinyl)-P,P-diphenyl-phosphinic amide), 3, [cis-Co(L2)₂(NO₃)](NO₃), 4, and [Ag(L3)(NO₃)(CH₃CN)]_∞, (L3 = N-(6-methyl-2-pyridinyl)-P,P-diphenyl-phosphinic amide), 5, are reported. The L1 and L2 ligands in the monomeric complexes 1-4 chelate the metal centers through the pyrimidyl/pyridyl nitrogen atoms and the phosphinic amide oxygen atoms, whereas the L3 ligands in complex 5 bridge the metal centers, forming a 1-D zigzag chain. The chelating L2 ligands in complexes 3 and 4 adopt cis conformations and the bridging L3 ligand in complex 5 adopts a trans conformation, respectively.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Mono- and bis-[2-(P,P-dimethylphosphanyl)ethyl]tetramethylcyclopentadienyl zirconium(IV) complexes: Synthesis and structural studies in crystalline state and in solutions

Synthetic routines for a new ligand C₅Me₄CH₂CH₂PMe₂ (2b) in forms of its Li- (2b-Li), Na- (2b-Na) salts and in the CH-form (2b-H), as well as for silanes Me₃Si-C₅H₄CH₂CH₂PMe₂ (3a) and Me₃Si-C₅Me₄CH₂CH₂PMe₂ (3b) have been developed. On the basis of it, new half-sandwich [η⁵:η¹-κP-C₅H₄CH₂CH₂PMe₂]ZrCl₃ (4a), [η⁵:η¹-κP-C₅Me₄CH₂CH₂PMe₂]ZrCl₃ (4b) and sandwich [η⁵-C₅Me₄CH₂CH₂PMe₂]₂ZrCl₂ (5), [η⁵-C₅Me₄CH₂CH₂PMe₂][η⁵-C₅Me₅]ZrCl₃ (6) complexes of Zr(IV) have been prepared and characterized. Along with them, the first example of X-ray structurally characterized dinuclear Zr(IV) complex incorporating both sandwich (6) and half-sandwich (4b) moieties linked one to another by means of Zr ← P coordination bond 7, has been described. Formation of an analogously organized trinuclear complex 8, built from one sandwich fragment of 5 and two half-sandwich fragments of 4b was proved by NMR spectroscopy methods. Molecular structures of half-sandwich complexes in their solvent-free dimeric forms (4a and 4b) and as 1:1 adducts with THF (4a-THF and 4b-THF) along with those of dinuclear complex 7 have been established by X-ray diffraction analyses. The dynamic behavior for di- and trinuclear complexes 7 and 8, due to the intermolecular dissociation-coordination of the Me₂P-groups in THF-d₈ solutions has been studied by variable-temperature NMR spectroscopy.     

Syntheses,crystal structures,and magnetic and luminescent properties of a series of lanthanide coordination polymers with chelidamic acid ligand

A series of lanthanide(III) complexes with chelidamic acid ligand, [Ln(C₇H₂NO₅)·3H₂O]_n·nH₂O (Ln = La (1), Y (2), Sm (3), and Nd (4)), [Gd₂(C₇H₂NO₅)₃·4H₂O]_n·2nH₂O (5) and [Ce(C₇H₂NO₅)·1.5H₂O]_n (6), have been synthesized by hydrothermal method and structurally characterized by single-crystal X-ray diffraction. Complexes 1–4 are isostructural and possess 2D framework. Complex 5 contains two different Gd(III) ions linked through carboxylate group to form a 2D framework. Complex 6 exhibits a (4⁴) topology 2D network. The variable-temperature magnetic properties of 3 and 5 have been investigated. Furthermore, the photoluminescent properties of 1, 2, 3, and 5 at room temperature were also studied.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Reactions of P4S10 and pyPS2Cl with N,N′-diphenylurea and N,N′-diphenylthiourea

The reaction of P₄S₁₀ (1) with N,N′-diphenylurea (PhNH)₂CO (2) results in new heterocyclic compounds: the pyridinium salt of 1,3-diphenyl-2-sulfido-2-thioxo-1,3-diaza-2λ⁵-phosphetidine (3) (with a P–N–C–N cycle) and the pyridinium salt of 1,4-diphenyl-2,5-disulfido-2,5-dithioxo-1,4-dithiadiaza-2λ⁵,5λ⁵-diphosphinane (4), containing the (P–S–N)₂ cycle and the cyclic thiophosphates [pyH]₂[P₂S₈] (5), [pyH]₂[P₂S₇] (6) and [pyH]₃[P₃S₉] (7). A similar reaction, but carried out with N,N′-diphenylthiourea (PhNH)₂CS (8), leads to the formation of 4 and 6. pyPS₂Cl (9), used as an alternative starting material, also yields compounds 3, 4, 5, and further [pyH][PS₂Cl₂] (10) and S₈ after reaction with 2. Compound 3 reacts with Pd(CH₃COO)₂, with the formation of the complex [Pd(Ph₂N₂COPS₂)₂] (11). The crystal structures of 3 and 7 were determined by single-crystal X-ray diffraction.     

Tricyclic ligands on cyclam core and X-ray crystallographic structure of hexachloro-(1,11:4,8-bis(pyridine-2,6-diyl-bis(2-(N-(2-formidoylethylene)carbamoyl)ethylene))-1,8-diazonia-4,11-diazacyclotetradecane) - dimanganese(II) dimethanol dihydrate solvate

The synthesis of tricyclic compounds on functionalized cyclam core is described. The addition of four methyl acrylate molecules and consecutive condensation of this derivative with ethylenediamine resulted in formation of 1,4,8,11-tetrakis(2-(N-(2-aminoethyl)carbamoyl)ethyl)-1,4,8,11-tetraazacyclotetradecane (3). Compound 3 was the substrate for further condensation with dialdehydes: iso-phthaldialdehyde and 2,6-pyridinedicarbaldehyde, resulting in spontaneous macrocycle ring closure to give tricyclic derivatives: 1,11:4,8-bis(benzene-1,3-diyl-bis(2-(N-(2-formidoylethylene)carbamoyl)ethylene))-1,4,8,11-tetraazacyclotetradecane (4) in the reaction of 3 with iso-phthaldialdehyde and three isomers: 1,4:8,11-bis(pyridine-2,6-diyl-bis(2-(N-(2-formidoylethylene)carbamoyl)ethylene))-1,4,8,11-tetraazacyclotetradecane (5A), 1,11:4,8-bis(pyridine-2,6-diyl-bis(2-(N-(2-formidoylethylene)carbamoyl)ethylene))-1,4,8,11-tetraazacyclotetradecane (5B), and 1,8:4,11-bis(pyridine-2,6-diyl-bis(2-(N-(2-formidoylethylene)carbamoyl)ethylene))-1,4,8,11-tetraazacyclotetradecane (5C) when 2,6-pyridinedicarbaldehyde was used. The compounds 4, 5B, and 5C were identified crystallographically. The isolated 5A converted in solution into the mixture of 5B and 5C as monitored by the ¹H NMR spectroscopy. The tricycle 5 is able to accept two manganese(II) metal ions by reacting with manganese(II) dichloride with simultaneous diprotonation of 5. Structure of the resulting Mn₂(5BH₂)Cl₆·(CH₃OH)₂(H₂O)₂ was determined crystallographically.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

Self-immobilized metallocene catalysts bearing an allyl group for ethylene polymerization, X-ray crystal structure of [(CH2CHCH2)CH3Si(C13H8)2]ZrCl2

A series of ansa-metallocene complexes with an allyl substituted silane bridge [(CH₂CHCH₂)CH₃Si(C₅H₄)₂]TiCl₂ (1), [(CH₂CHCH₂)CH₃Si(C₉H₆)₂]MCl₂ [M=Ti (2), Zr (3), Hf (4)] and [(CH₂CHCH₂)CH₃Si(C₁₃H₈)₂]ZrCl₂ (6) have been synthesized and characterized. The molecular structure of 6 has been determined by X-ray crystallographic analysis. Complexes 1-4, 6 bearing allyl groups have been investigated as self-immobilized catalysts for ethylene polymerization in the presence of MMAO. The results showed that the self-immobilized catalysts 1-4, 6 kept high ethylene polymerization activities of ca. 10⁶ g PE mol⁻¹ M h⁻¹ and high molecular weight (M_w≈10⁵) of polyethylene.