Excess thermodynamics properties of propyl propanoate+hexane+cyclohexane at 298.15 K

Summary In this paper we present excess molar volumes and excess molar enthalpies of binary and ternary mixtures containing propyl propanoate, hexane and cyclohexane as components at 298.15 K. Excess molar volumes were calculated from the density of the pure liquids and mixtures. The density was measured using an Anton Paar DMA 60/602 vibrating-tube densimeter. Excess molar enthalpies were obtained using a Calvet microcalorimeter     

Excess molar enthalpies of the ternary mixtures: (diisopropyl ether or tetrahydrofuran)+3-methylpentane+n-dodecane at 298.15 K

Microcalorimetric measurements of excess molar enthalpies, at 298.15 K, are reported for the two ternary systems formed by mixing either diisopropyl ether or tetrahydrofuran with binary mixtures of 3-methylpentane and n-dodecane. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

Excess enthalpies of the ternary mixtures: tetrahydrofuran + (diisopropyl ether or 2-methyltetrahydrofuran) + n-heptane at 298.15 K

Excess molar enthalpies, measured at 298.15 K in a flow microcalorimeter, are reported for the ternary mixtures (tetrahydrofuran + diisopropyl ether + n-heptane) and (tetrahydrofuran + 2-methyltetrahydrofuran + n-heptane). Smooth representations of the results are described and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. The latter are compared with diagrams obtained when the model of Liebermann and Fried is used to estimate the excess enthalpies of the ternary mixtures from the physical properties of the components and their binary mixtures.     

Thermodynamic properties of the ternary system MTBE+1-propanol+hexane

Experimental excess molar enthalpies and excess molar volumes of the ternary system x₁MTBE+x₂1-propanol+(1-x₁-x₂) hexane and the involved binary mixtures have been determined at 298.15 K and atmospheric pressure. Excess molar enthalpies were measured using a standard Calvet microcalorimeter, and excess molar volumes were determined from the densities of the pure liquids and mixtures, using a DMA 4500 Anton Paar densimeter. The UNIFAC group contribution model (in the versions of Larsen et al., and Gmehling et al.) has been employed to estimate excess enthalpies values. Several empirical expressions for estimating ternary properties from experimental binary results were applied.     

Excess molar enthalpies of the ternary mixtures: methyl tert-butyl ether + 3-methylpentane + (n-decane or n-dodecane) at 298.15 K

Excess molar enthalpies, measured at 298.15 K in a flow microcalorimeter, are reported for the two ternary mixtures formed by mixing either methyl tert-butyl ether with binary mixtures of 3-methylpentane and either n-decane or n-dodecane. Smooth representations of the ternary results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is found that the Liebermann and Fried model also provided good representation of the ternary results, using only the physical properties of the components and their binary mixtures.     

Determination of experimental excess molar properties for MTBE+1-propanol+octane

Summary Experimental excess molar enthalpies and densities have been measured for the ternary mixture x₁MTBE+x₂1-propanol+(1-x₁-x₂)octane and the involved binary mixtures at 298.15 K and atmospheric pressure. In addition, excess molar volumes were determined from the densities of the pure liquids and mixtures. A standard Calvet microcalorimeter was employed to determine the excess molar enthalpies. Densities were measured using a DMA 4500 Anton Paar densimeter. The UNIFAC group contribution model (in the versions of Larsen et al., and Gmehling et al.) has been used to estimate excess enthalpies values. Experimental data were also used to test several empirical expressions for estimating ternary properties from experimental binary results.     

Excess Enthalpies of 2-Methyltetrahydrofuran + (2,2,4-Trimethylpentane or n-Heptane) + Methylcyclohexane at 25°C

Measurements of excess molar enthalpies at 25°C in a flow microcalorimeter, are reported for the two ternary mixtures 2-methyltetrahydrofuran + 2, 2, 4-trimethylpentane + methylcyclohexane and 2-methyltetrahydrofuran + n-heptane + methylcyclohexane. Smooth representations of the results are described and used to construct constant-enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpies can be obtained from the Liebermann–Fried model using only the physical properties of the components and their binary mixtures.     

Association model of fluids. Simultaneous representation of excess Gibbs energies and excess enthalpies for liquid mixtures with alkanols

The binary excess Gibbs energies and excess enthalpies of liquid mixtures of alkanols and hydrocarbons, acetone, methyl acetate, acetonitrile, organic acid, etc., are simultaneously correlated with a new association model whose equilibrium constants are defined in terms of the modified segment fractions of chemical species. The model predicts ternary vapor-liquid, liquid-liquid equilibria and excess molar enthalpies of those mixtures well using only binary parameters.     

Excess Enthalpies of Ternary Mixtures: (2-Methyltetrahydrofuran or Di-n-Butyl ether) + 3-Methylpentane + n-Decane at 25°C

Measurements of excess molar enthalpies at 25°C in a flow microcalorimeter are reported for the two ternary mixtures 2-methyltetrahydrofuran + 3-methylpentane + n-decane and di-n-butyl ether + 3-methylpentane + n-decane. Smooth representations of the results are described and used to construct constant-enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpies can be obtained from the Liebermann–Fried model using only the physical properties of the components and their binary mixtures.     

DISQUAC predictions of excess enthalpies of the ternary mixture: tetrahydrofuran + cyclohexane + butanenitrile

Excess molar enthalpies of the ternary mixture: tetrahydrofuran + cyclohexane + butanenitrile and of the binary mixtures involved have been measured at 298.15 K by means of a flow microcalorimeter.The DISQUAC analysis is developed using interchange coefficients previously determined for the binary mixtures. Even neglecting ternary interactions, it is possible to obtain a satisfactory representation of the ternary system.     

Excess Enthalpies of Ethyl tert-Butylether + 2,2,4-Trimethylpentane + Decane or Dodecane at 25°C

Measurements of excess molar enthalpies at 25°C in a flow microcalorimeter, are reported for the two ternary mixtures ethyl tert-butylether + 2,2,4-trimethylpentane + n-decane and ethyl tert-butylether + 2,2,4-trimethylpentane + n-dodecane. Smooth representations of the results are described and used to construct constant-enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpies can be obtained from the Liebermann–Fried model using only the physical properties of the components and their binary mixtures.     

Thermodynamics of the ternary mixture propan-1-ol + tetrahydrofuran + n-heptane at 298.15 K. Experimental results and ERAS model calculations of G, H and V

Excess molar enthalpies H^E and excess molar volumes V^E have been measured at 298.15 K and 0.1 MPa for the ternary mixture tetrahydrofuran (THF) + propan-1-ol (PrOH) + n-heptane including the three binary mixtures using flow calorimetry and a vibrating tube densitometer, respectively.

Molar excess Gibbs energies G^E have been measured at 298.15 K using a static VLE apparatus equipped with a chromatographic sampling technique for the vapor phase as well as for the liquid phase. Experimental results have been compared with predictions of the ERAS model.     

Excess Enthalpies of 2-Methyltetrahydrofuran + 2,2,4-Trimethylpentane + (Decane or Dodecane) at 25°C

Measurements of excess molar enthalpies at 25°C in a flow microcalorimeter, are reported for the two ternary mixtures 2-methyltetrahydrofuran + 2,2,4-trimethylpentane + n-decane and 2-methyltetrahydrofuran + 2,2,4-trimethylpentane + n-dodecane. Smooth representations of the results are described and used to construct constant-enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpies can be obtained from the Liebermann–Fried model using only the physical properties of the components and their binary mixtures.     

Volumetric and acoustic properties of the ternary system (1-butanol+1,4-dioxane+cyclohexane)

Densities and speeds of sound for the ternary system 1-butanol+1,4-dioxane+cyclohexane have been measured at the temperatures of 298.15 and 313.15 K. Excess molar volumes and excess isentropic compressibilities have been calculated from experimental data and fitted by the Redlich-Kister equation for ternary mixtures. The ERAS model has been used to calculate excess molar volumes of the ternary mixture from parameters obtained from the constituent binary mixtures.     

Ternary excess molar enthalpies for the mixtures of methanol and ethanol with tetrahydropyran or 1,4-dioxane at 298.15 K

Ternary excess molar enthalpies, H_m^E, at 298.15 K and atmospheric pressure measured by using a flow microcalorimeter are reported for the (methanol+ethanol+tetrahydropyran) and (methanol+ethanol+1,4-dioxane) mixtures. The pseudobinary excess molar enthalpies for all the systems are found to be positive over the entire range of compositions. The experimental results are correlated with a polynomial equation to estimate the coefficients and standard errors. The results have been compared with those calculated from a UNIQUAC associated solution model in terms of the self-association of alcohols as well as solvation between unlike alcohols and alcohols with tetrahydropyran or 1,4-dioxane. The association constants, solvation constants and optimally fitted binary parameters obtained solely from the pertinent binary correlation predict the ternary excess molar enthalpies with an excellent accuracy.     

预测三元系超额焓的一种新方法

提出一种预测三元系超额焓的新方法。该方法利用改进的立方状态方程－－ＦＲＫＳ方程，并以二元互作用参数函数代替单一数值的二地互作用参数，为计算体系提供随状态变化的二元互作用参数数值。对十二个非理想三元系及其组分二元素的计算结果表明，该方法明显提高了二元系超额焓的拟合精度，从而在不引入任何三元参数的条件下较好地改进了三元系超额焓的预测。     

Excess Enthalpies of 2,2-Dimethylbutane + Cyclohexane + (Octane or Dodecane) at 25°C

Measurements of excess molar enthalpies at 25°C in a flow microcalorimeter,are reported for the two ternary mixtures 2,2-dimethylbutane + cyclohexane +n-octane and 2,2-dimethylbutane + cyclohexane + n-dodecane. Smoothrepresentations of the results are described and used to construct constant enthalpy contourson Roozeboom diagrams. It is shown that useful estimates of the ternary enthalpiescan be obtained from the Flory theory using only the physical properties of thecomponents and their binary mixtures.     

Excess molar enthalpies for ternary mixtures of (methanol or ethanol + water + tributyl phosphate) at <Emphasis Type="Italic">T</Emphasis> = 298.15 K

Excess molar enthalpies for two ternary mixtures of {x ₁ tributylphosphate (TBP) + x ₂ water + x ₃ methanol/ethanol} were measured at T = 298.15 K and atmospheric pressure using a TAM Air isothermal calorimeter, by mixing methanol or ethanol with binary mixtures of (water + TBP). Excess enthalpies for initial binary mixtures of (water + TBP) were also measured under the same conditions, which showed phase separation at low molar fraction of TBP. Experimental results of the ternary mixtures were expressed with constant excess molar enthalpy contours on Roozeboon diagrams.     

Excess enthalpies of ketone+methyl methylthiomethyl sulfoxide or +dimethyl sulfoxide at 298.15 k

Excess enthalpies of sixteen binary mixtures between one each of methyl methylthiomethyl sulfoxide (MMTSO) and dimethyl sulfoxide (DMSO) and one of ketone {CH₃CO(CH₂)_nCH₃, n=0 to 6 and CH₃COC₆H₅} have been determined at 298.15 K. All the mixtures showed positive excess enthalpies over the whole range of mole fractions. Excess enthalpies of ketone+MMTSO or DMSO increased with increasing the number of methylene radicals in the methyl alkyl ketone molecules. Excess enthalpies of MMTSO+ketone are smaller than those of DMSO+ketone for the same ketone mixtures. The limiting excess partial molar enthalpies of the ketone, H ₁ ^E,∞, in all the mixtures with MMTSO were smaller than those of DMSO. Linear relationships were obtained between limiting excess partial molar enthalpies and the number of methylene groups except 2-propanone.     

Excess Molar Volumes of (Methyl Ethanoate + 1-Chlorooctane + an n-Alkane) Ternary Mixtures and Their Constituent Binaries at 25°C

Excess molar volumes, at the temperature 25°C and atmospheric pressure over the whole composition range, are reported for the following binary mixtures: methyl ethanoate + (n-octane, n-decane); methyl ethanoate + 1-chlorooctane; 1-chlorooctane + (n-heptane, n-octane, n-nonane, n-decane); and for the ternary mixtures methyl ethanoate + 1-chlorooctane + (n-heptane, n-octane, n-nonane, n-decane). The values of excess molar volumes were calculated from density and composition results. The excess volumes were utilized to test the multiproperty group-contribution model of Nitta et al. using parameter sets available in the literature. Experimental results from ternary mixtures have also been compared to predictions from several empirical and semiempirical models, which utilize, exclusively, results from binary mixtures.