Nucleation effect of cyclodextrin inclusion compounds on the crystallization of polypropylene

The β‐cyclodextrin (β‐CD) and γ‐cyclodextrin (γ‐CD) inclusion compounds (ICs) with two different molecular weight isotactic polypropylene (iPP) were prepared. The ICs with high molecular weight iPP as guest molecule had lower inclusion rate. The crystallization behavior of iPP blended with the CDs and ICs was investigated by differential scanning calorimetry, polarized optical microscopy, and light scattering. The iPP blended with the ICs was found to exhibit higher crystallization temperature (T_C), smaller spherulites, and faster crystallization rate than those of neat iPP. These results indicate that the ICs play a role of nucleating agent on the crystallization of iPP and induce the accelerated crystallization. Both β‐CD‐iPP ICs and γ‐CD‐iPP ICs with longer iPP molecular chains had better nucleation effect than the ICs with shorter iPP molecular chains. This suggested that the nucleation effect of these ICs was affected by the inclusion rate of ICs. The lower inclusion rate could result in better nucleation effect, due to the interaction of extended iPP molecules inside the CD cavity and iPP molecules in the matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 130–137, 2009     

Carboxylic acid‐containing benzoxazines as efficient catalysts in the thermal polymerization of benzoxazines

The autocatalytic thermal polymerization behavior of three benzoxazine monomers containing carboxylic acid functionalities is reported. Several mixtures of these carboxylic monomers and 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine were prepared and their thermal polymerization behavior was analyzed by differential scanning calorimetry. The acid character of these reactive monomers increases the concentration of oxonium species, thus catalyzing the benzoxazine ring opening reaction. In this way the polymerization temperature decreased by as much as 100 °C in some cases. The existence of decarboxylation processes at high temperatures has been established by FTIR‐ATR and related to the increase in thermal stability observed by TGA in some cases. A relationship between the presence of carboxylic groups in the resulting materials and their flame retardancy behavior has also been established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6091–6101, 2008     

Microencapsulation of ammonium polyphosphate with PVA–melamine–formaldehyde resin and its flame retardance in polypropylene

With a shell of PVA–melamine–formaldehyde resin, microencapsulated ammonium polyphosphate (VMFAPP) is prepared by in situ polymerization and characterized by FTIR and XPS. Microencapsulation gives VMFAPP better water resistance and flame retardance compared with APP in PP. Thermal stability and fire resistance behavior have been analyzed and compared. The LOI value of the PP/VMFAPP composite is higher than that of the PP/APP composite. The UL 94 ratings of most of the PP/VMFAPP composites are V‐0, whereas PP/APP gives no rating at the 30% additive level. The water resistant properties of the PP composites are studied. Results of the cone calorimeter experiment show that VMFAPP is an effective flame retardant in PP compared with APP. The thermal degradation behaviors of APP and VMFAPP have been studied using TG and dynamic FTIR. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of β‐nucleating agent and crystallization conditions on the crystallization behavior and polymorphic composition of isotactic polypropylene/multi‐walled carbon nanotubes composites

In this study, the effects of crystallization conditions (cooling rate and end temperature of cooling) on crystallization behavior and polymorphic composition of isotactic polypropylene/multi‐walled carbon nanotubes (iPP/MWCNTs) composites nucleated with different concentrations of β‐nucleating agent (tradename TMB‐5) were investigated by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and scanning electronic microscopy (SEM). The results of DSC, WAXD and SEM revealed that the addition of MWCNTs and TMB‐5 evidently elevates crystallization temperatures and significantly decreases the crystal sizes of iPP. Because of the competition between α‐nucleation (provided by MWCNTs) and β‐nucleation (induced by TMB‐5), the β‐phase crystallization takes place only when 0.15 wt% and higher concentration of TMB‐5 is added. Non‐isothermal crystallization kinetics study showed that the crystallization activation energy ΔE of β‐nucleated iPP/MWCNTs composites is obviously higher than that of pure iPP, which slightly increases with the increase of TMB‐5 concentration, accompanying with the transition of its polymorphic crystallization behavior. The results of non‐isothermal crystallization and melting behavior suggested that the cooling rate and end temperature of cooling (T_end) are important factors in determining the proportion and thermal stability of β‐phase: Lower cooling rate favors the formation of less amount of β‐phase with higher thermal stability, while higher cooling rate encourages the formation of higher proportion of β‐phase with lower thermal stability. The T_end = 100°C can eliminate the β–α recrystallization during the subsequent heating and therefore enhance the thermal stability of the β‐phase. By properly selecting TMB‐5 concentration, cooling rate and T_end, high β‐phase proportion of 88.9% of the sample was obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of inorganic fullerene‐like WS2 nanoparticles on the thermal behavior of isotactic polypropylene

A new family of thermoplastic nanocomposites based on isotactic polypropylene (iPP) and inorganic fullerene‐like tungsten disulfide (IF‐WS₂) has been successfully prepared. A very efficient dispersion of IF‐WS₂ material was obtained by mixing in the melted polymer without using modifiers or surfactants. The addition of IF‐WS₂ nanoparticles induces a remarkable enhancement of the thermal stability of iPP, as well as an increase in the crystallization rate of the matrix when compared with pure iPP. The nucleating efficiency of IF‐WS₂ solid lubricant nanoparticles on the α‐phase of iPP reaches very high values (60–70%), the highest values observed hitherto for polypropylene nanocomposites. The incorporation of IF‐WS₂ has also been observed to increase the size and stability of the crystals formed. The melting behavior of the nanocomposites indicates the formation of more perfect crystals as determined by differential scanning calorimetry and time‐resolved synchrotron X‐ray scattering experiments. The new nanocomposites show an increase in the storage modulus with respect to pure iPP measured by dynamic mechanical analysis. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2309–2321, 2007     

Crystallization and melting behaviors of isotactic polypropylene nucleated with compound nucleating agents

Crystallization and melting behaviors of isotactic polypropylene (iPP) nucleated with compound nucleating agents of sodium 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate (hereinafter called as NA40)/dicyclohexylterephthalamide (hereinafter called as NABW) (weight ratio of NA40 to NABW is 1:1) were studied by differential scanning calorimetry and wide‐angle X‐ray diffraction (WAXD), the relative β‐amount of iPP nucleated with these compound nucleating agents was also calculated in Turner‐Jones equation by using wide‐angle X‐ray diffraction data. Under isothermal crystallization, there exists a temperature range favorable for formation of β‐iPP. When the concentration of compound nucleating agents is 0.2 wt %, the temperature range is from 100 to 140 °C. While in nonisothermal crystallization, lower cooling rate is favorable for form of β‐iPP and the relative β‐amount of iPP increases with the decreasing of cooling rate in crystallization process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 911–916, 2008     

Isothermal crystallization kinetics of polypropylene latex–based nanocomposites with organo‐modified clay

The effect of organo‐modified clay (Cloisite 93A) on the crystal structure and isothermal crystallization behavior of isotactic polypropylene (iPP) in iPP/clay nanocomposites prepared by latex technology was investigated by wide angle X‐ray diffraction, differential scanning calorimetry and polarized optical microscopy. The X‐ray diffraction results indicated that the higher clay loading promotes the formation of the β‐phase crystallites, as evidenced by the appearance of a new peak corresponding to the (300) reflection of β‐iPP. Analysis of the isothermal crystallization showed that the PP nanocomposite (1% C93A) exhibited higher crystallization rates than the neat PP. The unfilled iPP matrix and nanocomposites clearly shows double melting behavior; the shape of the melting transition progressively changes toward single melting with increasing crystallization temperature. The fold surface free energy (σ_e) of polymer chains in the nanocomposites was lower than that in the PP latex (PPL). It should be reasonable to treat C93A as a good nucleating agent for the crystallization of PPL, which plays a determinant effect on the reduction in σ_e during the isothermal crystallization of the nanocomposites. The activation energy, ΔE_a, decreased with the incorporation of clay nanoparticles into the matrix, which in turn indicates that the nucleation process is facilitated by the presence of clay. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1927–1938, 2010     

Effect of compounding procedure on morphology and crystallization behavior of isotactic polypropylene/high‐density polyethylene/carbon black ternary composites

The effect of compounding procedure on morphology and crystallization behavior of isotactic polypropylene/high‐density polyethylene/carbon black (iPP/HDPE/CB) composite was investigated. iPP/HDPE/CB composites were prepared by four compounding procedures (A: iPP + HDPE + CB; B: iPP/HDPE + CB; C: HDPE/CB + iPP; D: iPP/CB + HDPE). Scanning electron microscopy observation showed that CB particles are mainly distributed in HDPE in all composites, and the phase morphology of composites was obviously affected by a compounding procedure. The size of the HDPE/CB domains in the composites prepared by procedures A and D decreased with the increase in CB content, whereas that of HDPE/CB in the composites prepared by procedures B and C rarely changed with the increase in CB content. The crystallization behaviors of the composites were significantly affected by their phase morphology, which resulted from the variation of compounding procedure. The isothermal crystallization rate of iPP in the composites prepared by procedures A and D was obviously increased, which may originate from the small HDPE/CB droplets dispersed in the iPP phase. The non‐isothermal crystallization curves of composites prepared by procedure D represented two peaks because the iPP component in these composites had the fastest crystallization rate, whereas the curves of composites prepared by other compounding sequences only exhibited one peak. Moreover, the crystallinity of HDPE almost increased by one time with the incorporation of only 1 phr CB because the CB particles selectively located in the HDPE phase, and the crystallinity of HDPE decreased with the further increase of CB content because of the strong restriction of CB on the HDPE chains. Copyright © 2011 John Wiley & Sons, Ltd.     

Relationships between nanostructure and thermomechanical properties in poly(vinyl alcohol)/montmorillonite nanocomposite with an entrapped polyelectrolyte

Poly(vinyl alcohol)/montmorillonite (PVA/MOM) hydrogels containing coacervated microparticles of sulfonated polyester (PES) were prepared by direct mixture of the components in water. The system was characterized by using differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), and dynamical mechanical analysis (DMA). The influence of PES and MOM on the microstructure of the nanocomposite hydrogels was established. The presence of PES causes a significant change on the crystallinity of PVA. Furthermore, the presence of MOM leads to a hierarchical nanostructure that also contributes to change the crystallinity of PVA. The results of structural investigation are correlated with the mechanical properties of the composites obtained by DMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2618–2629, 2008     

Intumescent flame retardation and silane crosslinking of PP/EPDM elastomer

This study deals with the silane crosslinking and intumescent flame retardation of polypropylene/ethylene‐propylene‐diene copolymer (PP/EPDM) elastomers. The effect of silane crosslinking on the flame retardancy of the PP/EPDM composites containing melamine phosphate (MP) and dipentaerythritol (DPER) was studied by limiting oxygen index, UL 94 and cone calorimetry tests. The chemical composition of the silane crosslinked and flame retarded PP/EPDM composites treated at different temperatures was studied by X‐ray photoelectron spectroscopy and real time Fourier transform infrared (FTIR) spectrometry. Thermal decomposition and crystallization behavior of the PP/EPDM composites were investigated using thermogravimetric analysis and differential scanning calorimetry, respectively. Moreover, the mechanical properties of the composites were also studied. It is found that the flame retardancy, mechanical properties, and thermal decomposition behavior of the composites are influenced by silane grafting and crosslinking. Copyright © 2008 John Wiley & Sons, Ltd.     

Crystallization behavior and morphological development of isotactic polypropylene with an aryl amide derivative as β‐form nucleating agent

This article reports crystallization behaviors of isotactic polypropylene (iPP) with an aryl amide derivative (TMB‐5) as β‐form nucleating agent. The effects of nucleating agent concentration, thermal history and assemble morphology of nucleating agent on the crystallization behaviors of iPP were studied by differential scanning calorimetry, X‐ray diffraction, and polarized optical microscopy. The results indicated that the TMB‐5 concentration should surpass a threshold value to get products rich in β‐iPP. The diverse morphologies of TMB‐5 are determined by nucleating agent concentration and crystallization condition. At higher concentrations, the recrystallized TMB‐5 aggregates into needle‐like structure, which induces mixed polymorphic phases on the lateral surface and large amount of β modification around the tip. High β nucleation efficiency was obtained at the lowest studied crystallization temperature, which is desirable for real molding process. TMB‐5 prefers to recrystallize from the melt at higher concentration and lower crystallization temperature. The difference in solubility, pertinent to concentration and crystallization temperature, determined the distinct crystallization behaviors of iPP. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1725–1733, 2008     

Isothermal crystallization kinetics of polypropylene/POSS composites

Polypropylene (PP)/octavinyl polyhedral oligomeric silsesquioxane (POSS) composites were prepared by two different processing methods: reactive blending and physical blending, and the crystallization behavior of PP and PP/POSS composites was studied by means of differential scanning calorimetry and polarized optical microscope. The results showed that the crystallization of PP in PP/POSS composites was strongly influenced by the different processing methods. POSS particles can act as effective nucleating agent, accelerating the crystallization of PP. The crystallization rate increased more dramatically for the reactive blending composite due to the stronger nucleating effect of PP grafted POSS. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1762–1772, 2008     

Toughening of a propylene‐b‐(ethylene‐co‐propylene) copolymer by a plastomer

Several blends, covering the entire range of compositions, of a metallocenic ethylene‐1‐octene copolymer (CEO) with a multiphasic block copolymer, propylene‐b‐(ethylene‐co‐propylene) (CPE) [composed of semicrystalline isotactic polypropylene (iPP) and amorphous ethylene‐co‐propylene segments], have been prepared and analyzed by differential scanning calorimetry, X‐ray diffraction, optical microscopy, stress‐strain and microhardness measurements, and dynamic mechanical thermal analysis. The results show that for high CEO contents, the crystallization of the iPP component is inhibited and slowed down in such a way that it crystallizes at much lower temperatures, simultaneously with the crystallization of the CEO crystals. The mechanical results suggest very clearly the toughening effect of CEO as its content increases in the blends, although it is accompanied by a decrease in stiffness. The analysis of the viscoelastic relaxations displays, first, the glass transition of the amorphous blocks of CPE appearing at around 223 K, which is responsible for the initial toughening of the plain CPE copolymer in relation to iPP homopolymer. Moreover, the additional toughening due to the addition of CEO in the blends is explained by the presence of the β relaxation of CEO that appears at about 223 K. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1869–1880, 2002     

Crystallization studies of isotactic polypropylene containing nanostructured polyhedral oligomeric silsesquioxane molecules under quiescent and shear conditions

Crystallization studies at quiescent and shear states in isotactic polypropylene (iPP) containing nanostructured polyhedral oligomeric silsesquioxane (POSS) molecules were performed with in situ small‐angle X‐ray scattering (SAXS) and differential scanning calorimetry (DSC). DSC was used to characterize the quiescent crystallization behavior. It was observed that the addition of POSS molecules increased the crystallization rate of iPP under both isothermal and nonisothermal conditions, which suggests that POSS crystals act as nucleating agents. Furthermore, the crystallization rate was significantly reduced at a POSS concentration of 30 wt %, which suggests a retarded growth mechanism due to the molecular dispersion of POSS in the matrix. In situ SAXS was used to study the behavior of shear‐induced crystallization at temperatures of 140, 145, and 150 °C in samples with POSS concentrations of 10, 20, and 30 wt %. The SAXS patterns showed scattering maxima along the shear direction, which corresponded to a lamellar structure developed perpendicularly to the flow direction. The crystallization half‐time was calculated from the total scattered intensity of the SAXS image. The oriented fraction, defined as the fraction of scattered intensity from the oriented component to the total scattered intensity, was also calculated. The addition of POSS significantly increased the crystallization rate during shear compared with the rate for the neat polymer without POSS. We postulate that although POSS crystals have a limited role in shear‐induced crystallization, molecularly dispersed POSS molecules behave as weak crosslinkers in polymer melts and increase the relaxation time of iPP chains after shear. Therefore, the overall orientation of the polymer chains is improved and a faster crystallization rate is obtained with the addition of POSS. Moreover, higher POSS concentrations resulted in faster crystallization rates during shear. The addition of POSS decreased the average long‐period value of crystallized iPP after shear, which indicates that iPP nuclei are probably initiated in large numbers near molecularly dispersed POSS molecules. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2727–2739, 2001     

CO2‐delayed crystallization of isotactic polypropylene: A kinetic study

The effect of CO₂ on the nonisothermal crystallization of isotactic polypropylene (iPP) was studied with high‐pressure differential scanning calorimetry at cooling rates of 0.2–5 °C/min. CO₂ significantly delayed the melt crystallization of iPP, and both the crystallization temperature and the heat of crystallization decreased with increasing CO₂ pressure. The crystallization rate of iPP, as characterized by the half‐time, was also prolonged by the presence of CO₂. With a modified Ozawa model developed by Seo, the Avrami crystallization exponent n of iPP was calculated. This value was depressed by the addition of CO₂ and was strongly dependent on the CO₂ pressure at low cooling rates. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1518–1525, 2003     

Microencapsulation of bisphenol-A bis (diphenyl phosphate) and influence of particle loading on thermal and fire properties of polypropylene and polyethylene terephtalate

Microencapsulated flame retardant, bisphenol-A bis (diphenyl phosphate) (BDP), with a silane shell was prepared by sol–gel process with the goal of incorporating them in polymeric matrices by melt blending to improve the flame retardancy of isotactic polypropylene (iPP) and polyethylene terephtalate (PET). The influence of the loading content on thermal transitions has been studied by differential scanning calorimetry (DSC), the thermal stability of the polymer/microcapsules composites has been assessed by thermogravimetric analysis (TGA) and cone calorimetry has been used to study the fire reaction. It was noticed that the microcapsules have a limited influence on the thermal transitions of iPP matrix, but a decrease of the melting and glass transition temperatures was detected for the PET microcomposites. TGA results showed that the addition of microcapsules could improve char formation of the PET systems both in nitrogen and in air atmospheres, whereas only a small improvement of the thermal stability was detected in oxidative atmosphere for the iPP samples. Furthermore, cone calorimeter experiments show that the incorporation of microcapsules in the iPP gives almost no improvement in the iPP fire reaction. However, the microcapsules act as flame retardant in PET reducing the heat release rate during the combustion and the total heat evolved. Therefore, microcapsules can act as a char promoter agent to enhance the fire resistance in the case of PET.     

Microencapsulated ammonium polyphosphate with urea–melamine–formaldehyde shell: preparation,characterization, and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MCU‐APP) with urea–melamine–formaldehyde (UMF) resin is prepared by in situ polymerization, and is characterized by FTIR and XPS. The microencapsulation of APP with the UMF resin leads to a decrease in the particle's water solubility. The flame retardant actions of MCU‐APP and APP in PP are studied using limiting oxygen index (LOI) and UL‐94 test, and their thermal stability is evaluated by thermogravimetric analysis. It is found that the LOI value of the PP/MCU‐APP composite is higher than the value of the PP/APP composite. In comparison with the PP/MCU‐APP composites, the LOI values of the PP/MCU‐APP/DPER ternary composites at the same additive loading increase, and UL‐94 ratings of most ternary composites are raised to V‐0. The water‐resistant properties of the PP composites containing APP and MCU‐APP are studied. Moreover, the combustion behavior of the PP composites is investigated by the cone calorimeter. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of stereo-defect distribution and molecular mass in the non-isothermal crystallization behavior of β-nucleated isotactic polypropylene

In this study, based on the synthesis of two Ziegler–Natta iPP with nearly same average isotacticity but different uniformities of stereo-defect distribution, we further prepared two series of β-iPP with different molecular masses by addition of different concentration of peroxide. We investigated the combination effects of stereo-defect distribution and molecular mass on the non-isothermal crystallization behavior and polymorphic composition behavior of β-iPP by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), and scanning electron microscope (SEM). The results of non-isothermal crystallization kinetics revealed that the iPP molecular mass has only slight influence on the crystallization temperature of β-iPP, while the uniformity of stereo-defect distribution not only evidently influences the crystallization temperature, but also affects the dependency of crystallization temperature on cooling rate. β-iPP with less uniformity of stereo-defect distribution leads to higher dependency of crystallization temperature on the cooling rate. The calculation of crystallization activation energy ΔE showed that the lower the molecular mass, the lower the ΔE, indicating that it is easier for the occurrence of crystallization. Meanwhile, iPP with more uniform stereo-defect distribution has lower ΔE. Moreover, both stereo-defect distribution and molecular mass are important factors in determining the polymorphic composition. A more uniform stereo-defect distribution is more favorable for the β-phase crystallization; the lower the molecular mass, the harder for β-phase crystallization to take place. However, compared with iPP molecular mass, the uniformity of stereo-defect distribution is the first-order factor in determining the β-phase crystallization of iPP. Moreover, the thermal stability and the dependency of β-phase proportion on the cooling rate are also found to be highly dependent on the iPP molecular mass.     

Phase morphology and mechanical properties of iPP/SEP blends

The effects of the addition of diblock copolymer poly(styrene‐b‐ethylene‐co‐propylene) (SEP) to isotactic polypropylene (iPP) on the morphology and mechanical properties were investigated. Phase morphologies of iPP/SEP blends up to a 70/30 weight ratio, prepared in Brabender Plasticoder, were studied with optical microscopy, scanning electron microscopy, transmission electron microscopy, and wide‐angle X‐ray diffraction. The addition of 2.5 wt % SEP caused a nucleation effect (by decreasing the crystallite and spherulite size) and randomization of the crystallites. With further SEP addition, the crystallite and spherulite size increased because of prolonged solidification and crystallization and achieved the maximum in the 80/20 iPP/SEP blend. This maximum was a result of the appearance of β spherulites and the presence of mixed α spherulites in the 80/20 iPP/SEP blend. Dispersed SEP particles were irregular and elongated clusters consisting of oval and spherical core–shell microdomains or SEP micelles. SEP clusters accommodated their shapes to interlamellar and interspherulitic regions, which enabled a well‐developed spherulitization even in the 70/30 iPP/SEP blend. The addition of SEP decreased the yield stress, elongation at yield, and Young's modulus but significantly improved the notched impact strength with respect to the strength of pure iPP at room temperature. Some theoretical models for the determination of Young's modulus of iPP/SEP blends were applied for a comparison with the experimental results. The experimental line was closest to the Takayanagi series model. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 566–580, 2001     

Rheological properties and crystallization behavior of multi‐walled carbon nanotube/poly(ε‐caprolactone) composites

Multi‐walled carbon nanotube/poly(ε‐caprolactone) composites (PCLCNs) were prepared by melt compounding. The rheology, nonisothermal crystallization behavior, and thermal stability of PCLCNs were, respectively, investigated by the parallel‐plate rheometer, differential scanning calorimeter, and TGA. Cole–Cole plots were employed successfully to detect the rheological percolation of PCLCNs under small amplitude oscillatory shear. PCLCNs present a low percolation threshold of about 2–3 wt % in contrast to that of clay‐based nanocomposites. The percolated nanotube network is very sensitive to the steady shear deformation, and is also to the temperature, which makes the principle of time‐temperature superposition be invalid on those percolated PCLCNs. Small addition of nanotube cannot improve the thermal stability of PCL but can increase crystallization temperature remarkably due to the nucleating effect. As the nanotube is much enough to be percolated, however, the impeding effect becomes the dominant role on the crystallization, and the thermal stability increases to some extent. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3137–3147, 2007