We report a novel observation of the tetragonal perforated layer structures in a series of rod-coil liquid crystalline block copolymers (BCPs), poly(styrene-block-(2,5-bis[4-methoxyphenyl]oxycarbonyl)styrene) (PS-b-PMPCS). PMPCS forms rigid rods while PS forms the coil block. Differential scanning calorimetry (DSC), polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), wide-angle X-ray diffraction (WAXD), and transmission electron microscopy (TEM) techniques were used to investigate these rod-coil molecules, and a perforated layer structure was observed at f(PMPCS) approximately 0.37 in relatively low molecular weight (M(w)) samples and approximately 0.5 in high M(w) PS-b-PMPCS. This substantial phase boundary shift was attributed to the rod-coil nature of the BCP. The perforation obeys a tetragonal instead of hexagonal symmetry. The "onset" of perforation was also observed in real space in sample PS(272)-b-PMPCS(93) (f(PMPCS) approximately 0.52), in which few PS chains punctuate PMPCS layers. A slight increase in f(PS), by blending with PS homopolymer, led to a dramatic change in the BCP morphology, and uniform tetragonal perforations were observed at f(PMPCS) approximately 0.48. 相似文献
In this paper, two types of three-arm star mesogen-jacketed crystal polymers (MJLCPs) with different core (that is hard core and soft core) were synthesized by 2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene (MPCS), which was initiated by two different trifunctional initiators 1,3,5-(2′-bromo-2′-methylpropionato)benzene (Ia) and 1,1,1-tris(2-bromoisobutyryloxymethyl)propane (Ib), respectively. Characterization of these polymers by 1H NMR and GPC clearly supported the formation of a three-arm star-shaped PMPCS. The resulting three-arm star PMPCS possessed narrow molecular weight distribution, and its molecular weight (Mn,NMR) agreed well with the theoretical value, which reveals the quantitative initiation efficiency. The liquid-crystalline behaviors of the two types of three-arm star polymer with different structure were also investigated by differential scanning calorimeter (DSC) and polarized optical microscope (POM). We found that the liquid-crystalline behavior was incorrelated with structure of core but correlated with the length of three-arm star polymer arm. Only each arm of the three-arm star-shaped polymers with a Mn,GPC beyond 0.90 × 104 g/mol could form a liquid crystalline phase,which was found to be stable up to the decomposition temperature of these tri-arm MJLCPs. 相似文献
Two-dimensional correlation spectroscopy has been applied to study PMPCS (poly{2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene}), a representative example of mesogen-jacketed liquid crystalline polymers. With the precise analysis of a series of Fourier transform infrared (FTIR) spectra of PMPCS recorded at varied temperatures, a reasonable mechanism of the development of liquid crystalline (LC) phase is proposed. Before the phase transition, the conformational change of individual side chains occurs sooner than that of the backbone due to the larger motional freedom of the side chains. After the phase transition, however, the readjustment of still somewhat mobile backbone occurs before the ordered, rigid, and mutually interacting side chains. That is, phase transition leading to the LC phase formation brings in a new cooperative restriction of motions to the segments. 相似文献
A side-on liquid crystalline monomer, 2,5-bis[(4-hexyloxyphenyl)oxycarbonyl]styrene) (HPCS), was successfully polymerized via atom transfer radical polymerization (ATRP). The polymerization was catalyzed by CuBr/PMDETA in chlorobenzene at 90℃ with (1-bromoethyl)benzene as the initiator. The polymers have narrow MWD. It is the second example of mesogen-jacketed liquid crystalline polymer (MJLCP) prepared by ATRP. 相似文献
A series of novel ABC2-type liquid-crystalline block copolymers with azobenzene moieties in the side chains were prepared by combination of atom transfer radical polymerization (ATRP) and the chemical modification reaction. First, the bromine-terminated diblock copolymer poly(ethylene oxide) monomethyl ether-block-polystyrene (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO-Br, which was obtained from the esterification of MPEO and 2-bromoisobutyryl bromide. Then, the bromo end groups of the resulting MPEO-PS-Br were derivatized into twice as many bromoisobutyrates by the chain end modification reaction to obtain ω,ω′-bis(bromo)-PS-MPEO (MPEO-PS-Br2). The azobenzene-containing blocks of poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate] (PMMAZO) with different molecular weights were introduced into the derivative diblock copolymer by a second ATRP to synthesize the novel ABC2-type liquid-crystalline block copolymers poly(ethylene oxide) monomethyl ether-block-polystyrene-block-{poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate]}2 [MPEO-PS-(PMMAZO)2]. 相似文献
Summary: A novel ABC triblock copolymer with a rigid‐rod block was synthesized by atom transfer radical polymerization (ATRP). First, a poly(ethylene oxide) (PEO)‐Br macroinitiator was synthesized by esterification of PEO with 2‐bromoisobutyryl bromide, which was subsequently used in the preparation of a poly(ethylene oxide)‐block‐poly(methyl methacrylate) (PEO‐b‐PMMA) diblock copolymer by ATRP. A poly(ethylene oxide)‐block‐poly(methyl methacrylate)‐block‐poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (PEO‐b‐PMMA‐b‐PMPCS) triblock copolymer was then synthesized by ATRP using PEO‐b‐PMMA as a macroinitiator.
ABC triblock copolymer with a rigid‐rod block. 相似文献
The synthesis of rod-coil diblock copolymers was achieved for the firsttime by TEMPO-mediated "living" free radical polymerization of styrene and 2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene(MPCS). The block architecture of the two diblockcopolymers thus prepared, MPCS-b-St(5400/2400) and MPCS-b-St(10800/8700), was con-firmed by GPC, DSC studies and the formation of multimolecular micelles. 相似文献
A stable nitroxyl radical functionalized with two initiating groups for atom transfer radical polymerization (ATRP), 4-(2,2-bis-(methyl 2-bromo isobutyrate)-propionyloxy)-2,2,6,6-tetramethyl-1-piperidinyloxy (Br2-TEMPO), was synthesized by reacting 4-hydroxyl-2,2,6,6-tetramethyl-1-piperidinyloxy with 2,2-bis-(methyl 2-bromo isobutyrate) propanoic acid. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br2-TEMPO. The obtained polystyrene had two active bromine atoms for ATRP at the ω-end of the chain and was further used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare AB2-type miktoarm star-shaped copolymers. The molecular weights of the resulting miktoarm star-shaped copolymers at different monomer conversions shifted to higher molecular weights without any trace of the macroinitiator, and increased with monomer conversion. 相似文献
Well-defined four-arm star poly(?-caprolactone)-block-poly(cyclic carbonate methacrylate) (PCL-b-PCCMA) copolymers were synthesized by combining ring-opening polymerization (ROP) with atom transfer radical polymerization (ATRP). First, a four-arm poly(?-caprolactone) (PCL) macroinitiator [(PCL-Br)4] was prepared by the ROP of ?-CL catalyzed by stannous octoate at 110°C in the presence of pentaerythritol as the tetrafunctional initiator followed by esterification with 2-bromoisobutyryl bromide. The sequential ATRP of CCMA monomer was carried out by using the (PCL-Br)4 tetrafunctional macroinitiator (MI) and in the presence of CuBr/2, 2′-bipyridyl system in DMF at 80°C with [(MI)]:[CuBr]:[bipyridyl] = 1:1:3 to yield block polymers with controlled molecular weights (Mn (NMR) = 10700 to 27300 g/mol) by varying block lengths and with moderately narrow polydispersities (Mw/Mn = 1.2–1.4). Block copolymers with different PCL: PCCMA copolymer composition such as 50:50, 70:30 and 74:26 were prepared with good yields (48-74%). All these block copolymers were well characterized by NMR, FTIR and GPC and tested their thermal properties by DSC and TGA. 相似文献