Electrografting of amino-TEMPO on graphene oxide and electrochemically reduced graphene oxide for electrocatalytic applications

4-Amino-2,2,6,6-tetramethyl-1-piperridine N-oxyl (4-amino-TEMPO), an electroactive nitroxide radical, was attached to the surface of graphene oxide (GO) and electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode by a simple, rapid and green electrografting method. The electroactive interfaces were analyzed by X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The calculated surface coverage for 4-amino-TEMPO is up to 1.55 × 10^− 9 mol·cm^− 2. The modified electroactive interface exhibited excellent electrocatalytic activity towards the electro-oxidation of reduced glutathione (GSH) and hydrogen peroxide (H₂O₂).     

电化学还原氧化石墨烯用于四环素电催化检测

四环素(TTC)因其广泛的抗菌性和低生产成本等特点而成为应用最广泛的兽医药物. TTC的大量使用不可避免地导致其进入地表水、地下水和污水处理厂.迄今,已有许多方法用于TTC检测,包括免疫测定法、微生物检测法和化学-物理法等.然而,这些方法费用高,耗时长或需要复杂的样品预处理过程,不适合现场测量或常规分析.电化学分析法具有操作简单、成本低廉、选择性和灵敏度较高、易实现在线检测等特点,在检测领域具有重要优势.石墨烯在电化学传感器领域表现出优越的应用性能,但有关石墨烯材料应用于电分析和电催化方面的报道仍然有限.石墨烯的前驱体氧化石墨烯(GO)片层底面上具有各种类型的含氧官能团和层状边缘,导致其绝缘并具有很多缺陷,使GO包含了sp2和sp3杂化碳原子,为GO提供了独特的具有化学功能的异构电子结构.通过对GO进行还原,可以生成新的sp2域或者改变含氧官能团的数量和类型,从而为GO提供更多的特殊性质.研究表明,电化学还原是一种绿色快速的还原方法,可以控制GO的还原程度和还原过程.本文利用电化学还原法来调整GO表面的官能团和缺陷度,利用在–0.8 V还原电位下得到的电化学还原氧化石墨烯(ERGO-0.8V)修饰玻碳电极(GC)为工作电极(GC/ERGO-0.8V),采用循环伏安法对溶解在pH=3的缓冲溶液中的TTC进行电化学检测,发现ERGO-0.8V对TTC具有电催化性能.利用红外光谱(FT-IR)、X射线光电子能谱(XPS)和拉曼光谱对ERGO-0.8V, ERGO-1.2V, GO及化学还原得到的石墨烯(CRGO)表面官能团和缺陷程度进行了表征,考察了TTC在ERGO-0.8V/GC上的电化学行为,对其电催化还原机理进行了推测.结果表明,与GO, ERGO-1.2V及CRGO修饰电极相比, GC/ERGO-0.8V修饰电极的催化还原峰在0–0.5 V,对TTC表现出独特的电催化性能, GC/ERGO-0.8V电极对浓度为0.1–120 mg/L的TTC溶液具有良好的检测性能,在不同浓度范围内其氧化峰峰电流与峰电位的线性关系不同. FT-IR和XPS结果显示,在–0.8 V还原电位下得到的ERGO-0.8V,其官能团类型和数量发生变化,但仍存在大量官能团,主要是羧基、羟基和环氧基.同时,拉曼表征显示ERGO-0.8V的缺陷密度增大,同时新生成的sp2域减小而使得ERGO的sp2域减小.对比GO等其他材料的表征结果推测,官能团变化是影响ERGO独特电催化性质的主要因素,除此之外还有材料的缺陷度和sp2域.推测GC/ERGO-0.8V修饰电极对TTC可能的催化机理为： TTC在GC/ERGO电极上的还原与氢醌和醌之间的转换有关;而对于ERGO,则可能对应于羧基和羟基之间的转化.然而,同样具有羧基和羟基的ERGO-1.2V则对TTC没有产生电催化作用.其原因可能是在–0.8到–1.2 V还原电位下,形成的羧基位于石墨烯片层内部,而片层内的电子传递较慢.     

Synthesis of adenine-modified reduced graphene oxide nanosheets

We report here a facile strategy to synthesize the nanocomposite of adenine-modified reduced graphene oxide (AMG) via reaction between adenine and GOCl which is generated from SOCl(2) reacted with graphite oxide (GO). The as-synthesized AMG was characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and galvanostatic discharge analysis. The AMG owns about one adenine group per 53 carbon atoms on a graphene sheet, which improves electronic conductivity compared with reduced graphene oxide (RGO). The AMG displays enhanced supercapacitor performance compared with RGO accompanying good stability and good cycling behavior in the supercapacitor.     

A nickel oxide nanoflakes/reduced graphene oxide composite and its high-performance lithium-storage properties

Journal of Solid State Electrochemistry - Since conventional graphite-based anode possesses a low capacity, seeking for high-capacity anode candidates becomes significant for constructing emerging...     

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Fe₃O₄ is considered as a promising electrode material for lithium-ion batteries(LIBs) due to its low cost and high theoretical capacity(928 mAh/g).Nevertheless,the huge volume expansion and poor conductivity seriously hamper its practical applications.In this study,we use a facile hydrothermal reaction together with a post heat treatment to construct the three-dimensional heterostructured composite(Fe₃O₄/rGO) inwhich reduced graphene oxide sheets wraped the Fe₃O₄ submicron cubes as the conductive network.The electric conduction and electrode kinetics of lithium ion insertion/extraction reaction of the composite is enhanced due to the assist of conductive rGO,and thus the Listorage performance is obviously improved.The composite exhibits a reversible charge capacity of772.1 mAh/g at the current density of 0.1 A/g,and the capacity retention reaches 70.3% after400 cycles at0.5 A/g,demonstrating obviously higher specific capacity and rate capability over the Fe₃O₄ submicron cubes without rGO,and much superior cycling stability to the parent Fe_2 O_3 submicron cubes without rGO.On the other hand,as a synergic conductive carbon support,the flexible rGO plays an important role in buffering the large volume change during the repeated discharge/charge cycling.     

还原氧化石墨烯表面聚苯胺纳米阵列的制备及电化学电容性能

本文以阳极氧化铝(AAO)膜为模板,通过恒电位法在自组装还原氧化石墨烯(rGO)膜表面制备有序聚苯胺(PANI)纳米线阵列。通过拉曼光谱和场发射扫描电子显微镜分别对其结构和微观形貌进行了表征,并对PANI纳米线阵列的电化学电容性能进行了测试。结果表明,rGO膜表面可电沉积PANI,电沉积得到的PANI纳米线阵列具有比PANI薄膜材料更高的电容和比电容。     

Hyperbranched polytriazine grafted reduced graphene oxide and its application

In this article, cyanuric chloride (CC) and hexamethylenediamine (HMD) as raw material, the grafting of hyperbranched polytriazine onto reduced graphene oxide surface (HBP‐RGO) was achieved by the repeated nucleophilic substitution between chlorine groups of CC and amino groups of HMD, respectively. The Fourier transform infrared, X‐ray photoelectron spectroscopic, Raman, transmission electron microscopic, thermogravimetric, and atomic force microscopic analysis showed that HBP‐RGO had been successfully prepared and the HBP had a dendritic structure on the surface of RGO. And then, the HBP‐RGO was added into polystyrene (PS) and the HBP‐RGO/PS composite was prepared by solution mixing. The micro‐morphology, thermal stability, and electrical conductivity of RGO/PS and HBP‐RGO/PS composites were characterized and compared. The scanning electron microscopic analysis showed that the HBP‐RGO can uniformly disperse in PS. Meanwhile, the HBP‐RGO/PS composite showed good thermal stability and electrical conductivity, the percolation threshold of the composites is low as 0.32 vol %. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2132–2140     

氧化石墨烯浓度对还原氧化石墨烯/ZnS电化学性能的影响

以氧化石墨烯(GO)、乙酸锌(Zn(CH₃COO)₂)和硫脲为原料,采用水热法成功制备了还原氧化石墨烯/ZnS(rGO/ZnS)复合材料,并将该材料用作锂离子电池负极。高导电性的 rGO可以为锂离子和电子的传输提供有效的路径,ZnS可以提供较高的理论比容量。rGO/ZnS复合材料在rGO与纳米级高度分散的类球形ZnS颗粒协同作用下展现了较好的嵌锂容量和循环性能。当GO质量浓度为2 mg·mL^-1时制备的rGO/ZnS复合材料的倍率性能最好,循环稳定性最佳。     

氧化石墨烯浓度对还原氧化石墨烯/ZnS电化学性能的影响

以氧化石墨烯(GO)、乙酸锌(Zn(CH₃COO)₂)和硫脲为原料,采用水热法成功制备了还原氧化石墨烯/ZnS(rGO/ZnS)复合材料,并将该材料用作锂离子电池负极。高导电性的 rGO可以为锂离子和电子的传输提供有效的路径,ZnS可以提供较高的理论比容量。rGO/ZnS复合材料在rGO与纳米级高度分散的类球形ZnS颗粒协同作用下展现了较好的嵌锂容量和循环性能。当GO质量浓度为2 mg·mL^-1时制备的rGO/ZnS复合材料的倍率性能最好,循环稳定性最佳。     

Double laminated reduced graphene/Cu_2S/reduced graphene/graphene oxide nanofilms and their photoelectrochemical properties

In this work,an efficient photocatalytic material was prepared directly on Indium tin oxide(ITO)glass substrates by fabricating Cu_2 S and graphene oxide onto graphene for photoelectrochemical(PEC) water splitting.The double laminated reduced graphene/Cu_2S/reduced graphene/graphene oxide(RG/Cu_2S/RG/GO) nanofilms were characterized,and an enhanced photoelectrochemical response in the visible region was discovered.The photocurrent density of the nanofilms for PEC water splitting was measured to be up to 1.98 m A/cm~2,which could be ascribed to the followings:(i) a higher efficiency of light-harvesting because of GO coupling with Cu_2 S that could broaden the absorbing solar spectrum and enhance the light utilization efficiency;(ii) a stepwise structure of band-edge levels in the Cu_2S/GO electrode was constructed;(iii) double laminated electron accelerator(RG) was used in the Cu_2S/GO materials to get better electron-injecting efficiency.     

Double laminated reduced graphene/Cu2S/reduced graphene/graphene oxide nanofilms and their photoelectrochemical properties

In this work,an efficient photocatalytic material was prepared directly on Indium tin oxide（ITO）glass substrates by fabricating Cu₂ S and graphene oxide onto graphene for photoelectrochemical（PEC） water splitting.The double laminated reduced graphene/Cu₂S/reduced graphene/graphene oxide（RG/Cu₂S/RG/GO） nanofilms were characterized,and an enhanced photoelectrochemical response in the visible region was discovered.The photocurrent density of the nanofilms for PEC water splitting was measured to be up to 1.98 m A/cm²,which could be ascribed to the followings:（i） a higher efficiency of light-harvesting because of GO coupling with Cu₂ S that could broaden the absorbing solar spectrum and enhance the light utilization efficiency;（ii） a stepwise structure of band-edge levels in the Cu₂S/GO electrode was constructed;（iii） double laminated electron accelerator（RG） was used in the Cu₂S/GO materials to get better electron-injecting efficiency.     

石墨烯/还原氧化石墨烯/聚苯胺复合材料的制备及在超级电容器中的应用

本研究以低成本、易规模化的亲水性石墨烯/氧化石墨烯为前驱体,通过原位聚合的方法制备石墨烯/氧化石墨烯/聚苯胺复合材料,经过化学还原后制备得到石墨烯/还原氧化石墨烯/聚苯胺复合材料.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶红外变化光谱仪(FT-IR)对制备的材料进行了结构和形貌的表征.运用循环伏安法...     

Self-assembled fabrication and flame-retardant properties of reduced graphene oxide/waterborne polyurethane nanocomposites

The graphite oxide (GO) was prepared from expandable graphite by the pressurized oxidation method, and samples were characterized using XRD, UV–Vis, and TEM. GO is reduced in situ emulsion using hydrazine to achieve reduced graphene oxide/waterborne polyurethane (rGO/WPU) nanocomposites. The effect of rGO content on the stability, fracture morphologies, mechanical performance, thermal degradation, and flame-retardant properties of rGO/WPU composites was investigated by zeta potential analyzer, TEM, SEM, universal testing machine, TG, and Cone Calorimeter. The results of zeta potential, TEM, and SEM analysis indicate that rGO has a good stability and dispersibility in rGO/WPU nanocomposites. The results of mechanical tests showed that the mechanical properties of rGO/WPU nanocomposites increased consistently with increasing rGO content up to 2 mass%, and TG showed that the thermostability of rGO/WPU nanocomposites decreased slightly compared to pure WPU, but carbon residue increased from 0.99 to 1.99 % when the mass fraction of rGO in WPU is 2 %. Cone Calorimeter test indicated that the flame-retardant and smoke suppression properties of rGO/WPU composites showed significant improvement compared to the WPU alone. When the mass fraction of rGO is 1 %, the total smoke release and smoke factor decreased by 25 and 38 %, respectively, compared to those of pure WPU.     

Synthesis of "clean" and well-dispersive Pd nanoparticles with excellent electrocatalytic property on graphene oxide

Ultrafine Pd nanoparticles monodispersed on graphene oxide (GO) surfaces were successfully prepared by the redox reaction between PdCl(4)(2-) and GO. The as-made catalyst is very "clean" as a result of the surfactant-free formation process, allowing it to express high electrocatalytic ability in formic acid and ethanol oxidation relative to a commercial Pd/C catalyst. This simple and straightforward method is of significance for the facile preparation metal nanocatalysts with high catalytic activity on proper supporting materials.     

Ultrasonic route synthesis,characterization and electrochemical study of graphene oxide and reduced graphene oxide

Research on Chemical Intermediates - In this study, an efficient route for graphene oxide (GO) and reduced GO (RGO) synthesis was developed by using an ultrasonic probe and bath alternatively. RGO...     

Evaluation of graphene oxide and reduced graphene oxide in the immobilization of laccase enzyme and its application in the determination of dopamine

Bioelectrodes were developed based on a simple deposition of graphene oxide (GO) or reduced graphed oxide (rGO) and laccase (Lac) on a glassy carbon (GC) electrode surface. The morphology and electrochemical behavior of the biosensors were characterized by scanning electron microscopy and cyclic voltammetry. These results demonstrated that only rGO was successfully applied for the immobilization of the laccase enzyme, improving the analytical signal for the determination of dopamine. The GC/rGO/Lac biosensor was applied to the detection of dopamine in synthetic urine and plasmatic serum samples, achieving a detection limit of 91.0 nmol L^?1.     

Functionalized reduced graphene oxide/epoxy composites with enhanced mechanical properties and thermal stability

One-pot hydrothermal reduction of graphene oxide (GO) in N-methyl-2-pyrrolidone (NMP) suspension was performed, wherein GO surface were functionalized by free radicals generated from NMP molecules. The NMP functionalized reduced GO (NMPG) nanosheets were then incorporated into epoxy matrix to prepare epoxy composites. The significant improvement of 100 and 240% in fracture toughness (critical intensity factor, K_IC) and fracture energy (critical strain energy release rate, G_IC) achieved from single edge notched bending (SENB) test revealed the excellent toughening ability of NMPG. The improved compatibility and interfacial interaction between the epoxy matrix and NMPG yielded∼28, 19 and 51% improvement in tensile strength, Young's and storage modulus, respectively. Thermal stability of pure epoxy and its composites was determined at 5, 10 and 50% weight loss, which showed 30, 27.5 and 29 °C improvement with 0.2 wt% NMPG loading. The work provides a simple method to prepare graphene-based epoxy composites with improved performance.     

Local current mapping and patterning of reduced graphene oxide

Conductive atomic force microscopy (C-AFM) has been used to correlate the detailed structural and electrical characteristics of graphene derived from graphene oxide. Uniform large currents were measured over areas exceeding tens of micrometers in few-layer films, supporting the use of graphene as a transparent electrode material. Moreover, defects such as electrical discontinuities were easily detected. Multilayer films were found to have a higher conductivity per layer than single layers. It is also shown that a local AFM-tip-induced electrochemical reduction process can be used to pattern conductive pathways on otherwise-insulating graphene oxide. Transistors with micrometer-scale tip-reduced graphene channels that featured ambipolar transport and an 8 order of magnitude increase in current density upon reduction were successfully fabricated.     

Integration of supertetrahedral cluster with reduced graphene oxide sheets for enhanced photostability and photoelectrochemical properties

Supertetrahedral zinc-gallium-tin sulfide cluster modified with reduced graphene oxide protective layer was first synthesized, which exhibited an excellent photoelectrochemical performance and enhanced stability in comparison to supertetrahedral clusters.