Radical copolymerization of N-vinylformamide with unsaturated carboxylic acids

Radical precipitative copolymerization of N-vinylformamide with acrylic and methacrylic acids in isopropanol at 60°C, with azobisisobutyric acid dinitrile as initiator, was studied. The conditional values of the relative reactivities were found: r ₁ = 0.068 ± 0.008 and r ₂ = 1.638 ± 0.025 for the N-vinylformamide-methacrylic acid copolymer and r ₁ = 0.15 ± 0.03 and r ₂ = 0.19 ± 0.09 for the N-vinylformamide-acrylic acid copolymer.     

Copolymerization of 2-Hydroxypropyl Methacrylate with Alkyl Met hacrylates

2-Hydroxypropyl methacrylate (2-HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the Yezrielev, Brokhina, and Raskin method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are r₁ = 1.807 ± 0.032 and r₂ = 0.245 ± 0.021; with BMA (M₂) they are n = 2.378 ± 0.001 and r₂ = 0.19 ± 0.01; and with EHMA the values are r₁ = 4.370 ± 0.048 and r₂ = 0.103 ± 0.006. Since reactivity ratios are the measure of distribution of monomer units in copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end-uses.     

Copolymerization parameters of acrolein and acidic vinyl monomers

Acrolein was copolymerized by radical initiation in aqueous solutions with sodium p-styrenesulfonate and acrylic acid, respectively, in the pH range of 3–7. The reactivities were shown to be pH-dependent. For the acrolein (M₁)–sodium p-styrenesulfonate (M₂) pair, r₁ = 0.33 ± 0.15 and r₂ = 0.32 ± 0.05 at pH 3; r₁ = 0.23 ± 0.12 and r₂ = 0.05 ± 0.03 at pH 5; r₁ = 0.26 ± 0.03 and r₂ = 0.025 ± 0.025 at pH 7. For the acrolein (M₁)–acrylic acid (M₂) pair, r₁ = 0.50 ± 0.30 and r₂ = 1.15 ± 0.2 at pH 3; r₁ = 2.40 ± 0.50 and r₂ = 0.05 ± 0.05 at pH 5; r₁ = 6.70 ± 3.00 and r₂ = 0.00 at pH 7. For acrolein, the new values of Q = 1.6 and e = 1.2 have been calculated. For sodium p-styrenesulfonate, the values Q = 0.76 and e = ?0.26 at pH 3, Q = 0.51 and e = ?0.87 at pH 5, Q = 0.39 and e = ?1.00 at pH 7 were obtained; and for acrylic acid, the values Q = 1.27 and e = 0.50 at pH 3, Q = 0.11 and e = ?0.22 at pH 5 were derived. The changes in reactivity are explained on the basis of inductive and resonance effects.     

Copolymerization of 2-Hydtoxypropyl Methacrylate with Alkyl Methacrylates

2-Hydroxypropyl methacrylate (2 HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the YBR method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are: r₁=1.807 ± 0.032, r₂=0.245 ± 0.021; with BMA (M₂) they are r₁=2.378 ± 0.001, r₂=0.19 ± 0.01; and with EHMA the values are r₁=4.370 ± 0.048, r₂=0.103 ± 0.006. Since the reactivity ratios are the measure of distribution of monomer units in a copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end uses.     

Alkali salts of (ω-sulphoxyalkyl)-acrylates and -methacrylates: Radical polymerization and copolymerization

A new preparation of alkali salts of (ω-sulphoxyalkyl)-acrylates and -methacrylates, by reaction of alkali salts of acrylic and methacrylic acids with cyclic sulphates, is described; spectral characterization of the products is described. The kinetics of the radical polymerization of sodium (2-sulphoxyethyl)methacrylate (SSEM) were studied; monomer reactivity ratios for copolymerization with methacrylic acid were: r₁ = 1.1 ± 0.15 and r₂ = 0.73 ± 0.05. Dark electrical surface conductivity of some homopolymers and copolymers with methacrylic acid was found to be 10⁴–10¹¹$\text{Ω}{}^{\mathrm{?1}}$, depending on relative humidity.     

Sulfur-Containing Vinyl Monomers. XIV. Radical Polymerizations and Copolymerizations of Vinyl Mercaptobenzazoles

Vinyl mercaptobenzazoles [thiazole (VMBT), oxazole (VMBO), and imidazole (VMBI)] were prepared through dehydrochlorination of the respective β-chloroethyl mercaptobenzazoles. These monomers were found to undergo vinyl polymerization in the presence of light or radical initiator, α,α'-azobisisobutyonitrile, to give relatively high molecular weight homopolymers. From the results of radical copolymerizations of these monomers with various monomers, the copolymerization parameters were determined as follows: VMBT(M₂): r₁ styrene(M₁): r₁ = 2.12 ± 0.09, r₂ = 0.336 ± 0.028, Q₂ = 0.75, e_z = ?1.38; VMBO(M₂)-styrene(M₁): r₁ = 2.61 ± 0.13, r₂ = 0.274 ± 0.03, Q₂ = 0.61, e₂ = ?1.38; VBMI(M₂)-styrene(M₁) r₁ =4.0, r₂ = 0.2, Q₂ = 0.37, e₂ = ?1.17. The polymerization reactivities of these monomers obtained from these parameters were compared with those of other vinyl sulfide monomers and discussed.     

Copolymerization of N,N-diallyl-N,N-dimethylammonium chloride with ethylene glycol vinyl ether in aqueous medium

The radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride (AMAC) (M₁) with ethylene glycol vinyl ether (M₂) in an aqueous medium proceeds at a high rate to afford random copolymers. The reactivity ratios equal to r ₁ = 2.18 and r ₂ = 0.01 indicate that AMAC is a more active comonomer. The overall reaction order in comonomers is 2.4, and the effective activation energy is 97.4 ± 2 kJ/mol. The monomer M₁ enters into copolymerization by both of the double bonds with the formation of pyrrolidinium structures in the chain through the cyclization stage.     

Terpolymerization of Butadiene,Acrylonitrile, and Methacrylic Acid

Abstract

The terpolymerization of butadiene, acrylonitrile, and methacrylic acid in emulsion, using potassium persulfate as initiator and sodium dioctylsulphosuccinate as emulsifier, was investigated. For the binary system butadiene (M₁) and methacrylic acid (M₂), the following monomer reactivity ratios were determined: r₁₂ = 0.18 ± 0.05 and r₂₁ = 0.52 ± 0.09. When polymerizations were stopped at low conversions they gave terpolymers which show good agreement between experimental and theoretical copolymerization composition data, calculated from the Alfrey-Goldfinger equation. The relationships between monomer feed and terpolymer compositions are presented on triangular coordinate graphs as proposed by Slocombe. By using a computer program, the lines of unique composition and the lines of binary azeotropic composition were established. No point of true azeotropic composition was found, but a “pseudo-azeotropic” region was recognized. The influence of composition on glass transition temperature and thermal characteristics of the terpolymers is described.     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Structure and reactivity of α,β-unsaturated ethers. VIII. Cationic copolymerizations and acetal additions of propenyl and isobutenyl ethyl ethers

Cationic copolymerizations of cis- and trans-propenyl ethyl ethers (PEE) with isobutenyl ethyl ether (IBEE) were carried out in methylene chloride at ?78°C with the use of boron trifluoride etherate as catalyst. Monomer reactivity ratios were r₁ = 24.0 ± 2.4 and r₂ = 0.02 ± 0.02 for the cis-PEE (M₁)–IBEE (M₂) system and r₁ = 19.1 ± 1.8 and r₂ = 0.04 ± 0.02 for the trans-PEE (M₁)–IBEE (M₂) system, indicative of the reactivity order: cis-PEE > trans-PEE ? IBEE. In separate experiments, these β-methyl-substituted vinyl ethers were allowed to react with various acetals in the presence of boron trifluoride etherate. The relative reactivities of these ethers were generally found to decrease in the order: cis-β-monomethylvinyl > vinyl > trans-β-monomethylvinyl > β,β-dimethylvinyl. Comparisons of these results with previously published copolymerization data have permitted the conclusion that, in both the copolymerizations and acetal additions, the single β-methyl substitution on vinyl ethers exerts little steric effect against their additions toward any alkoxycarbonium ion, whereas the β,β-dimethyl substitution results in a large adverse steric effect toward both β-monomethyl- and β,β-dimethyl-substituted alkoxycarbonium ions.     

Thermal degradation of bromine-containing polymers. Part 2—Characteristics and products of degradation of copolymers of 2-bromoethyl methacrylate and methyl acrylate

Reactivity ratios for the system 2-bromoethyl methacrylate (M₁)/methyl acrylate (M₂) have been obtained as follows using a nuclear magnetic resonance spectroscopic technique: r₁ = 2·77 ± 0·03, r₂ = 0·19 ± 0·02. The principal characteristics of the thermal degradation of this copolymer system have been established by the application of Thermal Gravimetry, Differential Scanning Calorimetry, Thermal Volatilisation Analysis and Sub-ambient Thermal Volatilisation Analysis, the products being identified principally by infra-red and NMR spectroscopic analysis. A quantitative analysis of the products of degradation is presented.     

Aminimides. IV. Homo- and copolymerization studies on trimethylamine methacrylimide

Trimethylamine methacrylimide (TAMI) has been homo- and copolymerized with methyl methacrylate, vinyl acetate, vinyl chloride, hydroxypropyl methacrylate, and acrylonitrile by free-radical initiators to soluble, low molecular weight polymers containing pendant aminimide groups along the backbone of the polymer chains. The reactivity ratios in the copolymerization of TAMI (M₁) with acrylonitrile (M₂) were determined: r₁ = 0.10 ± 0.01, r₂ = 0.37 ± 0.04. The Alfrey-Price Q and e values for TAMI were also calculated: Q = 0.18, e = ?0.60. This preliminary work indicates that TAMI has potential for the preparation of reactive polymers.     

The influence of molecular interactions on polymerization—IV: Copolymerization of 2-naphthyl methacrylate and methyl methacrylate in solvents with different dielectric constants

The copolymerization of 2-naphthyl methacrylate (2-NM) with methyl methacrylate (MMA) initiated by 2,2′-azoisobutyronitrile in carbon tetrachloride, chloroform, benzene, acetone and acetonitrile was investigated. The reactivity ratios determined by the methods of Fineman-Ross and Kelen-Tüdős are: in carbon tetrachloride—r_2-NM = 2.46 ± 0.25, r_MMA = 0.61 ± 0.06; chloroform—r_2-NM = 2.71 ± 0.30, r_MMA = 0.60 ± 0.06; benzene—r_2-NM = 2.62 ± 0.44, r_MMA = 0.63 ± 0.11; acetone—r_2-NM = 4.13 ± 0.45, r_MMA = 0.60 ± 0.06 and acetonitrile—r_2-NM = 3.70 ± 0.30, r_MMA = 0.62 ± 0.05.The dependence of the reactivity ratios on the solvent is explained on the basis of formation of complexes between the electron-donating naphthalene rings and the electron-accepting methacrylic double bonds, as indicated by NMR studies.     

Monomer reactivity ratio and Q–e values for copolymerization of hydroxyalkyl acrylates and 2-(1-aziridinyl)ethyl methacrylate with styrene

Copolymers of 2-hydroxyethyl acrylate, hydroxypropyl acrylate, and 2(1-aziridinyl)-ethyl methacrylate (M₂) with styrene (M₁) were prepared in benzene solution at 60°C. Benzoyl peroxide, 0.1–0.2 mole-%, was used as initiator. Copolymer samples with the molar concentrations of M₂ feed ranging from 0.10 to 0.85 were used to determine the reactivity ratios. Elemental analysis and nuclear magnetic resonance spectroscopy (NMR) were used to determine copolymer compositions. There was a solubility problem when the latter technique was applied. When samples which were completely soluble were analyzed, the results obtained from NMR and elemental analysis were in excellent agreement. The monomer reactivity ratios and the corresponding parameters for the copolymerization of (M₁) with 2-hydroxyethyl acrylate are: r₁ = 0.38 ± 0.02, r₂ = 0.34 ± 0.03; Q₂ = 0.85, e₂ = 0.64; with hydroxypropyl acrylate are: r₁ = 0.45 ± 0.03, r₂ = 0.36 ± 0.03; Q₂ = 0.75, e₂ = 0.56; with 2(1-aziridinyl)ethyl methacrylate are: r₁ = 0.53 ± 0.02, r₂ = 0.63 ± 0.04; Q₂ = 0.82, e₂ = 0.25.     

Copolymerization of 2-sulfoethyl methacrylate

Copolymers of 2-sulfoethyl methacrylate, (SEM) were prepared with ethyl methacrylate, ethyl acrylate, vinylidene chloride, and styrene in 1,2-dimethoxyethane solution with N,N′-azobisisobutyronitrile as initiator. The monomer reactivity ratios with SEM (M₁) were: vinylidene chloride, r₁ = 3.6 ± 0.5, r₂ = 0.22 ± 0.03; ethyl acrylate, r₁ = 3.2 ± 0.6, r₂ = 0.30 ± 0.05; ethyl methacrylate, r₁ = 2.0 ± 0.4, r₂ = 1.0 ± 0.1; styrene, r₁ = 0.6 ± 0.2, r₂ = 0.37 ± 0.03. The values of the copolymerization parameters calculated from the monomer reactivity ratios were e = +0.6 and Q = 1.4. Comparison of the monomer reactivities indicates that SEM is similar to ethyl methacrylate with regard to copolymerization reactivity in 1,2-dimethoxyethane solution. The sodium salt of 2-sulfoethyl methacrylate, SEM^?Na^⊕, was copolymerized with 2-hydroxyethyl methacrylate (M₂) in water solution. Reactivity ratios of r₁ = 0.7 ± 0.1 and r₂ = 1.6 ± 0.1 were obtained, indicating a lower reactivity of SEM^?Na^⊕ in water as compared to SEM in 1,2-dimethoxyethane. This decreased reactivity was attributed to greater ionic repulsion between reacting species in the aqueous medium.     

Poly[N-(2-hydroxypropyl)methacrylamide]—I. Radical polymerization and copolymerization

The radical polymerization of N-(2-hydroxypropyl)methacrylamide was investigated kinetically. The hydrophilic character of the polymerization medium was found to affect the rate of decomposition of the initiator [2,2′-azobis(methyl isobutyrate)] and the course of primary radical termination. The presence of the -OH group in the alkyl group attached to the nitrogen atom leads to an increase in the molecular weight of the polymer in comparison with polymers of N-alkyl methacrylamides. This phenomenon was interpreted in terms of the possibility of a polymeranalogous transesteramidation and of an increased possibility of transfer to monomer and polymer. The copolymerization parameters of N-(2-hydroxypropyl)methacrylamide (M₁) with methyl methacrylate and styrene were determined; in the first case, r₁ = 0·84 ± 0·05, r₂ = 0·66 ± 0·07; in the second case, r₁ = 0·53 ± 0·08, r₂ = 1·72 ± 0·19.     

Copolymerization of Allilidene Diacetate with Vinyl Acetate

Abstract

The monomer reactivity ratios for vinyl acetate (VAc)-allilidene diacetate (ADA) copolymerization have never been obtained. The composition of VAc-ADA copolymers was determined by NMR spectroscopy, measuring CH protons corresponding to ADA at 3.1τ and VAc at 5.1τ. The monomer reactivity ratios were evaluated; r₁ = 1.34 ± 0.05 and r₂ = 0.48 ± 0.03, where M₁ = ADA and M₂ = VAc. From these values the Q and e values for ADA were calculated: Q = 0.047 and e = 0.44 by taking Q = 0.026 and e = ?0.22 for VAc. The H value [1] for copolymerization of ADA, VAc, and vinyl chloride (VC) is 0.87.     

Molecular structure of hexafluorobicyclo [2.2.0]hexa-2,5-diene (hexafluoro-dewar-benzene) in the vapour phase

Hexafluoro-Dewar-benzene has been studied by the electron-diffraction method. A model with C_2v symmetry gives excellent agreement between experimental and theoretical data. The structural parameters with error limits are (cf. Fig. 1): r(C₁-C₄)= 1.598 ±0.017 Å, r(C₁-C₂) = 1.505 ±0.005 Å, r(C₂-C₃) = 1.366 ± 0.015 Å, r(C₁-F₁) = 1.328±0.015 Å, r(C₂-F₂) = 1.319±0.007 Å, ∠F₁C₁C₄ = 118.7±0.7°, ∠F₂C₂C₃ = 133.6±0.7°, τ= 121.8±2.0°, and δ = -7.5±2.0°. Molecular orbital calculations by the CNDO/2 method gave τ = 119.8° and δ = ?4.2°.     

Polymerization of β-cyanopropionaldehyde. X. Anionic copolymerization with methyl isocyanate

Anionic copolymerization of β-cyanopropionaldehyde (M₁) with methyl isocyanate (MeI, M₂) was studied with use of benzophenone–dilithium complex as initiator at ?78°C. The values of monomer reactivity ratio were determined to be r₁ = 8.3 ± 0.3 and r₂ = 0.01 ± 0.01. The structure of resulting copolymer was investigated by means of NMR analysis. The MeI unit is presumed to enter the copolymer chain through its C?N opening.