In situ IR spectroscopy for developing catalysts and catalytic processes

The role of in situ IR spectroscopy to characterize the surface of solid catalysts and to assess sorbed reactants and products together with important intermediates of the catalyzed reactions is outlined. Strategies are discussed using a complex case study, the synthesis of alkylamines. The experimental realization asks for the ability to record IR spectra in situ at elevated temperatures and pressures without influencing the kinetics of the reaction. On the advent of radically new methods of catalyst development, it is shown how IR spectroscopy will significantly contribute to catalyst and process development.     

In situ K-edge X-ray absorption spectroscopy of the ligand environment of single-site Au/C catalysts during acetylene hydrochlorination

The replacement of HgCl₂/C with Au/C as a catalyst for acetylene hydrochlorination represents a significant reduction in the environmental impact of this industrial process. Under reaction conditions atomically dispersed cationic Au species are the catalytic active site, representing a large-scale application of heterogeneous single-site catalysts. While the metal nuclearity and oxidation state under operating conditions has been investigated in catalysts prepared from aqua regia and thiosulphate, limited studies have focused on the ligand environment surrounding the metal centre. We now report K-edge soft X-ray absorption spectroscopy of the Cl and S ligand species used to stabilise these isolated cationic Au centres in the harsh reaction conditions. We demonstrate the presence of three distinct Cl species in the materials; inorganic Cl⁻, Au–Cl, and C–Cl and how these species evolve during reaction. Direct evidence of Au–S interactions is confirmed in catalysts prepared using thiosulfate precursors which show high stability towards reduction to inactive metal nanoparticles. This stability was clear during gas switching experiments, where exposure to C₂H₂ alone did not dramatically alter the Au electronic structure and consequently did not deactivate the thiosulfate catalyst.

In situ chlorine and sulphur XAS shows a dynamic ligand environment around cationic Au single-sites during acetylene hydrochlorination.     

In situ Ru K-edge X-ray absorption spectroscopy of a high-area ruthenium dioxide electrode in a Nafion-based supercapacitor environment

Changes in the state of charge of a high-area RuO_x electrode in an operating RuO_x|Nafion|IrO_x supercapacitor were monitored in situ by time-resolved, transmission Ru K-edge X-ray absorption spectroscopy (XAS). Linear and reversible variations in the intensity of the transmitted X-ray beam as a function of time were found by fixing the energy of the incident X-ray beam, E_i, at judiciously selected values within the Ru K-edge X-ray near edge structure (XANES), while the supercapacitor was charged and discharged at constant current. The sign of the slope of these temporal signals was found to vary, depending on the value of E_i. This behavior could be rationalized based on the spectral differences between the Ru K-edge XANES of RuO_x in the fully oxidized and fully reduced states, recorded in situ from films of the material electrodeposited on a gold substrate in the fluorescence mode.This paper is dedicated to Prof. Wolf Vielstich on the occasion of his 80th birthday for his outstanding contributions to electrochemistry     

In situ phosphorus K-edge X-ray absorption spectroscopy studies of calcium–phosphate formation and transformation on the surface of bacterial cellulose nanofibers

In this work, for the first time, in situ formation and transformation process of embryo calcium phosphate (Ca–P) minerals on three-dimensional bacterial cellulose nanofibers was investigated. Combined with XRD, X-ray absorption near-edge structure results revealed that the embryo precursor was amorphous calcium phosphate which was subsequently converted to β-tricalcium phosphate, octacalcium phosphate, and finally to the more thermodynamically stable form of hydroxyapatite. The methodology reported herein may be extended to the studies of Ca–P and other minerals on various substrates.     

原位拉曼光谱与X射线吸收光谱研究能源转换电催化反应

近年来,水分解、氧气/二氧化碳还原等电化学能源转换技术为解决全球能源短缺及环境问题提供了新的思路和方向.然而,对这些能源转换技术的反应机理及其催化剂的活性位点目前仍缺乏深刻的认识和理解,这限制了高效、稳定催化剂的开发,以致阻碍该类电化学技术的进一步发展.原位光谱技术的快速发展为解决上述问题提供了坚实的基础,其中拉曼光谱...     

In situ infrared,Raman and X-ray spectroscopy for the mechanistic understanding of hydrogen evolution reaction

Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopi...     

Analysis of mixtures of compounds of copper using K-edge X-ray absorption spectroscopy

Summary A determination is described of copper metal, oxide, and hydroxide in samples containing both nickel and copper. The analysis was based on K-edge x-ray absorption spectra of the copper. This allowed us to consider the chemical states of copper and ignore the nickel also present. The method involved fitting linear combinations of copper standard spectra to the spectrum from copper in the sample. The fit composition that minimized the variance gave the sample composition. The work demonstrated that K-edge x-ray absorption spectra are sufficiently characteristic to allow their use for quantification of components in mixtures. This method of analysis is complemented by diffraction and less general techniques. It is a strength of x-ray absorption edge analysis that it is element-specific and applicable to most elements maintained under any conditions of temperatures, pressure, and atmosphere.     

采用X射线吸收光谱表征单原子催化剂:至关重要与持久挑战

X射线吸收光谱(XAS)可为负载型单中心(单原子或单核金属络合物)催化剂的结构和电子特性提供重要信息.虽然XAS技术可表征真实反应条件下、无需长程有序结构的催化剂,并且可提供对于负载型单中心催化剂非常重要的金属-载体界面信息;但是它给出的信息是包括与催化有关或无关的所有负载型金属物种的平均信息.负载型催化剂的准确表征具有长期挑战性,也限制了我们准确地理解催化剂的构效关系.为了更好地利用XAS表征技术,深入研究催化剂的构效关系,并最终用其指导设计开发出高效的催化剂,制备具有均一结构活性位的负载型单中心催化剂,并采用XAS及相关技术对其表征至关重要.本文列举了一些实例以说明XAS在表征具有均一结构活性位的负载型单中心催化剂方面的能力,以及XAS如何与其他技术(如扫描透射电子显微镜和红外光谱)互补,为以分子筛和金属-有机骨架材料为载体而制得的具有均一结构活性位的负载型单中心催化剂提供原子尺度的信息.     

In situ electrochemical X-ray absorption spectroscopy of oxygen reduction electrocatalysis with high oxygen flux

An in situ electrochemical X-ray absorption spectroscopy (XAS) cell has been fabricated that enables high oxygen flux to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window. This cell design enables in situ XAS investigations of the oxygen reduction reaction (ORR) at high operating current densities greater than 1 mA in an oxygen-purged environment. When the cell was used to study the ORR for a Pt on carbon electrocatalyst, the data revealed a progressive evolution of the electronic structure of the metal clusters that is both potential-dependent and strongly current-dependent. The trends establish a direct correlation to d-state occupancies that directly tracks the character of the Pt-O bonding present.     

In situ X-ray Raman spectroscopy of LiBH4

X-Ray Raman Spectroscopy (XRS) is used to study the electronic properties of bulk lithium borohydride (LiBH(4)) and LiBH(4) in porous carbon nano-composites (LiBH(4)/C) during dehydrogenation. The lithium (Li), boron (B) and carbon (C) K-edges are studied and compared with calculations of the starting material and intermediate compounds. Comparison of the B and C K-edge XRS spectra of the as-prepared samples with rehydrogenated samples shows that the B and C electronic structure is largely regained after rehydrogenation. Both Li and C K-edge spectra show that during dehydrogenation, part of the Li intercalates into the porous carbon. This study shows that XRS in combination with calculations is a promising tool to study the electronic properties of nano-crystalline light-weight materials for energy storage.     

Advanced X-ray absorption and emission spectroscopy: in situ catalytic studies

Knowledge of the structure of catalysts is essential to understand their behavior, which further facilitates development of an active, selective, and stable catalyst. Determining the structure of a functioning catalyst is essential in this regard. The structure of a catalyst is prone to change during the catalytic process and needs to be determined in its working conditions. In this tutorial review, we have summarized studies done at synchrotron radiation facilities that illustrate the capability to determine catalyst structure using X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES). These studies aim at facilitating the determination of the dynamic structure-performance relationships during a catalytic process.     

Manganese K-edge X-ray absorption spectroscopy as a probe of the metal-ligand interactions in coordination compounds

A series of manganese coordination compounds has been investigated by X-ray absorption spectroscopy (XAS). The K-pre-edge spectra are interpreted with the aid of time-dependent density functional theory (TD-DFT). This method was calibrated for the prediction of manganese K-pre-edges with different functionals. Moreover the nature of all observed features could be identified and classified according to the corresponding set of acceptor orbitals, either 1s to 3d transitions or metal-to-ligand charge transfer (MLCT) bands. The observable MLCT bands are further divided into features that correspond to transitions into empty π* orbitals of π-donor ligands and those of π-acceptor ligands. The ability to computationally reproduce the observed features at the correct relative transition energy is strongly dependent on the nature of the transition. A detailed analysis of the electronic structure of a series of Mn coordination compounds reveals that the different classes of observable transitions provide added insight into metal-ligand bonding interactions.     

In situ soft X-ray absorption spectroscopy investigation of electrochemical corrosion of copper in aqueous NaHCO3 solution

A novel electrochemical setup has been developed for soft X-ray absorption studies of the electronic structure of electrode materials during electrochemical cycling. In this communication we illustrate the operation of the cell with a study of the corrosion behavior of copper in aqueous NaHCO₃ solution via the electrochemically induced changes of its electronic structure. This development opens the way for in situ investigations of electrochemical processes, photovoltaics, batteries, fuel cells, water splitting, corrosion, electrodeposition, and a variety of important biological processes.     

In situ Raman spectroscopy studies for electrochemical CO2 reduction over Cu catalysts

1. Download : Download high-res image (221KB)
2. Download : Download full-size image

     

In situ X-ray diffraction studies of structural transformations in V-P-O catalysts

Structural transformations of V-P-O catalysts have been studied in situ in oxidative, inert and reducing atmosphere by the high-temperature X-ray diffraction method. Formation of vanadyl phosphates is shown to depend on the P/V ratio in the initial sample. It has been established that transformations in the phase composition of catalysts is independent of the reaction media at P/V=2. The effect of catalyst composition on catalytic properties is discussed.

---

V-P-O , . , P/V . P/V=2. V-P-O .

     

Covalency trends in group IV metallocene dichlorides. chlorine K-edge X-ray absorption spectroscopy and time dependent-density functional theory

For 3-5d transition-metal ions, the (C5R5)2MCl2 (R = H, Me for M = Ti, Zr, Hf) bent metallocenes represent a series of compounds that have been central in the development of organometallic chemistry and homogeneous catalysis. Here, we evaluate how changes in the principal quantum number for the group IV (C5H5)2MCl2 (M = Ti, Zr, Hf; 1- 3, respectively) complexes affects the covalency of M-Cl bonds through application of Cl K-edge X-ray Absorption Spectroscopy (XAS). Spectra were recorded on solid samples dispersed as a thin film and encapsulated in polystyrene matrices to reliably minimize problems associated with X-ray self-absorption. The data show that XAS pre-edge intensities can be quantitatively reproduced when analytes are encapsulated in polystyrene. Cl K-edge XAS data show that covalency in M-Cl bonding changes in the order Ti > Zr > Hf and demonstrates that covalency slightly decreases with increasing principal quantum number in 1-3. The percent Cl 3p character was experimentally determined to be 26, 23, and 18% per M-Cl bond in the thin-film samples for 1-3 respectively and was indistinguishable from the polystyrene samples, which analyzed as 25, 25, and 19% for 1-3, respectively. To aid in interpretation of Cl K-edge XAS, 1-3 were also analyzed by ground-state and time-dependent density functional theory (TD-DFT) calculations. The calculated spectra and percent chlorine character are in close agreement with the experimental observations, and show 20, 18, and 17% Cl 3p character per M-Cl bond for 1-3, respectively. Polystyrene matrix encapsulation affords a convenient method to safely contain radioactive samples to extend our studies to include actinide elements, where both 5f and 6d orbitals are expected to play a role in M-Cl bonding and where transition assignments must rely on accurate theoretical calculations.