Chromium(VI) oxide-mediated oxidation of polyalkyl-polypyridines to polypyridine-polycarboxylic acids with periodic acid

4,4′-Dicarboxy-2,2′-bipyridine was synthesized quantitatively by chromium(VI) oxide-mediated oxidation of 4,4′-dimethyl-2,2′-bipyridine or 4,4′-diethyl-2,2′-bipyridine with periodic acid as the terminal oxidant in sulfuric acid. 5,5′-Dicarboxy-2,2′-bipyridine and 6,6’-dicarboxy-2,2′-bipyridine were also synthesized by the method from the corresponding dimethyl bipyridines in excellent yields. 4,4′,4″-Tricarboxy-2,2′:6′,2″-terpyridine was obtained in 80% yield from 4,4′,4″-triethyl-2,2′:6′,2″-terpyridine, and 4,4′,4″,4′″-tetracarboxy-2,2′:6′,2″:6″,2′″-quaterpyridine was obtained in 72% yield from 4,4′,4″,4′″-tetraethyl-2,2′:6′,2″:6″,2′″-quaterpyridine by the same procedure.     

Synthesis of Per- and Poly-Substituted Trehalose Derivatives: Studies of Properties Relevant to Their Use as Excipients for Controlled Drug Release

Per- and poly-substituted oligosaccharide derivatives, with trehalose cores, have been prepared and assessed for their potential for use as excipients in controlled-release formulations. The synthesized compounds, generally with acyl and amido substituents, included 6,6′-N,N′ -diamido-6,6′ -dideoxy-α,α -trehalose derivatives, 6,6′ -bis(1,2,3,4-tetra-O-acetyl-β -D-glucopyranuronyl)-α, α -trehalose derivatives, 2,2′,3,3′ -tetra-O-acetyl-6,6′ -bis-(1,2,3,4-tetra-O-acetyl-β-D-glucopyranuronyl)-4,4′ -di-O-acyl-α,α-trehalose, 2, 2′, 3, 3′ -tetra-O-acetyl-6-(1,2,3,4-tetra-O-acetyl-β-D-glucopyranuronyl)-4,4′,6′ -tri-O-acyl-α,α-trehalose, and 2,2′,3,3′,4,4′ -hexa-O-acetyl-6,6′ -bis-(1,2,3,4-tetra-O-acetyl-6-O-succinyl-β-D-glucopyranuronyl)-α,α-trehalose. Compounds were characterized by NMR, IR, MS and optical rotations; elemental analyses; or HRMS. The compounds formed amorphous materials either on fast quenching of melts or on spray drying. Properties, used in the initial assessment of the potential as controlled-release excipients, were log₁₀ P and glass transition, T_g, values.     

Thermal degradation of a polyphenylimide-quinoxaline in air and under vacuum

Three samples of poly{2,2′-[N,N′-bis(1,4-phenylene)benzophenone-3,3′,4,4′-tetracarboxylimide-6,6′-bis(3-phenyl-quinoxaline)]} (PPIQ), were prepared, differing in molecular weights and polymer chain endings. Their thermal degradation in vacuo and in air was determined by isothermal weight loss measurements. As in the case of poly-[2,2′-(1,4-phenylene)-6,6′-bis(3-phenylquinoxaline)] (PPQ), the temperature coefficients of thermal degradation in air were independent of molecular weight. However, in contrast, the temperature coefficients were independent of the type of polymer endgroups. It is, therefore, concluded that, contrary to amino-terminated PPQ's, polymer chain-end unzipping of PPIQ is of minor importance during thermal-oxidative degradation.     

A ter­phenyl halide series: 2,6‐Trip2­H3C6X (Trip = 2,4,6‐triiso­propyl­phenyl; X = Cl,Br, I)

The sterically encumbered ter­phenyl halides 2′‐chloro‐2,2′′,4,4′′,6,6′′‐hexaisopropyl‐1,1′:3′,1′′‐terphenyl, C₃₆H₄₉Cl, (I), 2′‐bromo‐2,2′′,4,4′′,6,6′′‐hexaisopropyl‐1,1′:3′,1′′‐terphenyl, C₃₆H₄₉Br, (II), and 2′‐iodo‐2,2′′,4,4′′,6,6′′‐hexaisopropyl‐1,1′:3′,1′′‐terphenyl, C₃₆H₄₉I, (III), crystallize in space group Pnma. They are isomorphous and isostructural with a plane of symmetry through the centre of the mol­ecule. The C–halide bond distances are 1.745 (3), 1.910 (4) and 2.102 (6) Å for (I)–(III), respectively.     

Reactions of 2,2′,5′,2′-terfuran

Formylation of 2,2′,5′,2′-terfuran ( 1 ) with N-methylformanilide and phosphorus oxychloride gave 5-formyl-2,2′,5′,2′-terfuran ( 2 ) and 5,5′-diformyl-2,2′5′,2′-terfuran ( 3 ). Reduction of 2 and 3 afforded 5-hydroxymethyl-2,2′,5′,2′-terfuran ( 4 ) and 5,5′ dihydroxymethyl-2,2′,5′,2′-terfuran ( 5 ), respectively. Terfuran 1 reacted with phenylmagnesium bromide to give 5-(phenylhydroxymethyl)-2,2′,5′,2′-terfuran ( 6 ), and was carbonated to 5-carboxy 2,2′,5′,2′-terfuran ( 7 ) and 5,5′-dicarboxy-2,2′,5′,2′-terfuran ( 8 ). Bromination of 1 with N-bromosuccinimide gave 5,5′-dibromo 2,2′,5′,2′-terfuran ( 9 ).     

Conformational dynamics of bis(BF2)‐2,2′‐bidipyrrins revealed by through‐space 13C?19F and 19F?19F couplings

The conformation of [bis‐(N,N′‐difluoroboryl)]‐3,3′‐diethyl‐4,4′,8,8′,9,9′,10,10′‐octamethyl‐2,2′‐bidipyrrin (1) in solution was studied by analyzing the ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings. The ¹H and ¹³C NMR spectra were assigned on the basis of nuclear Overhauser effect spectroscopy (NOESY), heteronuclear single‐quantum correlation (HSQC), and heteronuclear multiple‐bond correlation (HMBC) experiments. The ¹⁹F spectrum of 1 was compared with that of 2‐ethyl‐1,3,5,6,7‐pentamethyl‐4,4‐difluoro‐4‐bor‐3a,4a‐diaza‐s‐indacen (2). The ¹⁹F? ¹⁹F through‐space spin? spin coupling in 1 was thus assigned and the coupling constant was obtained by simulating the coupling patterns. The obtained conformation of 1 was compared with those of the known complexes [bis‐(N,N′‐difluoroboryl)]‐3,3′,8,8′,9,9′‐hexaethyl‐4,4′,10,10′‐tetramethyl‐6,6′‐(4‐methylphenyl)‐2,2′‐bidipyrrin (3)and [bis‐(N,N′‐difluoroboryl)]‐9,9′‐diethyl‐4,4′,8,8′,10,10′‐hexamethyl‐3,3′‐bis(methoxycarbonylethyl)‐2,2′‐bidipyrrin (4). The conformational dynamics of 1, 3, and 4 was surveyed by observing the temperature dependence of the through‐space coupling constants between 253 and 333 K. The ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings thus confirm similar conformations of different BisBODIPYs in solution in contrast to earlier findings in the solid state. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006     

μ‐2,2′,6,6′‐Tetramethyl‐4,4′‐bipyridine‐κ2N1:N1′‐bis[(diethylenetriamine‐κ3N,N′,N′′)palladium(II)] tetranitrate

The title compound, [Pd₂(C₄H₁₃N₃)₂(C₁₄H₁₆N₂)](NO₃)₄, comprises discrete tetracationic dumbbell‐type dinuclear complex molecules and noncoordinating nitrate anions. Two Pd(dien)²⁺ moieties (dien is diethylenetriamine) are joined by the rigid linear exo‐bidentate bridging 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine ligand to form the dinuclear complex, which lies across a centre of inversion in the space group P2₁/n, so that the rings in the 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine bridging ligand are parallel. In the crystal, the primary and secondary amino groups of the dien ligand act as hydrogen‐bond donors towards the nitrate anions to form a three‐dimensional hydrogen‐bond network.     

Sterically hindered aromatic compounds. X—molecular distortions and asymmetry in a symmetrically substituted azobenzene

No significant steric effects are observed in the proton and carbon resonance spectra of 2,2′,4,4′,6,6′-hexa-t-butylazobenzene, a very distorted molecule in the solid state.     

Reactions of 6-hydrazino-, 6-hydroxylaminopurines and related derivatives

7H-Tetrazolo[5,1-i]purine was prepared by nitrosation of 6-hydrazinopurine and by reaction of 6-chloropurine with sodium azide; it was converted to adenine upon catalytic hydrogenation. 6-Hydroxylaminopurine was oxidized to 6-nitrosopurine with manganese dioxide, while alkaline treatment of the former gave 6,6′-azoxypurine. Nitrosation of 6-hydroxylaminopurine afforded 6-(N-nitroso)hydroxylaminopurine. Reaction of 6-chloropurine with 6-hydrazinopurine led to 6,6′-bisadenine; the corresponding ribosyl derivatives gave 6,6′-bisadenosine. Upon air oxidation, 6,6′-bisadenine was converted into 6,6′-azopurine. The related 6-thiosemicarbazino- and 6-(N-methyl)ureidopurine derivatives are also described. 6-N-(Nitroso)hydroxylaminopurine showed an inhibitory activity against several mouse tumors and leukemias.     

Syntheses of three naturally occurring polybrominated 3,3′-bi-1H-indoles

The naturally occurring polybrominated indoles 2,2′,5,5′-tetrabromo-3,3′-bi-1H-indole, 2,2′,6,6′-tetrabromo-3,3′-bi-1H-indole, and 2,2′,5,5′,6,6′-hexabromo-3,3′-bi-1H-indole were synthesized using a palladium catalyzed, carbon monoxide mediated, double reductive N-heterocyclization of 2,3-bis(2-nitro-4(or 5)-bromophenyl)-1,4-butadienes as the key step.     

Spiro[1,3-benzoxathiepin-4(5H),1′-cyclohexa[2,4]diene]-2,2′-dione,a Novel Heterocyclic Ring System

The 4,4′,6,6′-tetrasubstituted 2,2′-alkylidenebis(phenols) 1 reacted with CISCOI to give spiro[1,3-benzoxathiepin-4(5H), 1′-cyclohexa[2,4]diene]-2,2′-diones 4 , together with cyclic carbonates 5 . The structures of the products were elucidated mainly by ¹³C-NMR and ¹H-NMR spectroscopy.     

Photolysis of 2,6-diphenyl-4h-pyran-4-thione and 2,6-diphenyl-4h-thiopyran-4-thione

Photolysis of 2,6-diphenyl-4H-pyran-4-thione and 2,6-diphenyl-4H-thiopyran-4-thione resulted in desulfurization and furnished 2,2′,6,6′-tetraphenyl-4,4′-di(pyranylidene) and 2,2′,6,6′-tetraphenyl-4,4′-di(thiopyranylidene) as the products. The mechanism was studied by quantum yield measurements. In dioxane, the quantum yield of di(pyranylidene) formation was concentration-dependent, while in benzene, it was independent of the concentration. The photoreaction proceeds via the triplet state of 2,6-diphenyl-4H-pyran-4-thione and 2,6-diphenyl-4H-thiopyran-4-thione and the H atom abstraction from solvents appears to be a key step in the formation ofdi(pyranylidene).     

4,10a-(Epidithio)-4,4a,10,10a-tetrahydro-1H-5-oxaanthracen-1-ones,tetracycles with a novel heterocyclic ring system

The 4,4′,6,6′-tetrasubstituted 2,2′-alkylidene-bisphenols 1 reacted with sulfur monochloride to give 4,10a-(epidithio)-4,4a,10,10a-tetrahydro-1H-5-oxaanthracen-1-ones ( 3 and 4 ). The structure of the products were elucidated by a combination of X-ray crystal-structure analysis and ¹H- and ¹³C-NMR spectroscopy.     

New 2-methyl-6-alkylamino-5,8-quinolinequinones and 1,2,3,4-tetrahydro derivatives

The syntheses of six new 2-methyl-6-alkylamino-5,8-quinolinequinones, three 1,2,3,4-tetrahydro-5,8-quinolinequinones, and 7-(2′,6′,10′-trimethylundecyl)-6-hydroxy-5,8-quinolinequinone are described as potential antimetabolites of coenzyme Q and as potential antimalarial agents. The six 2-methyl-6-alkylamino-5,8-quinolinequinones were prepared by a six-step synthesis. 2-Methyl-6-methoxy-8-nitroquinoline was prepared from 2-nitro-4-methoxyaniline and crotonaldehyde by a Skraup reaction. Raney nickel reduction gave 2-methyl-6-metboxy-8-aminoquinoline, which upon diazotization followed by dithionite reduction yielded 2-methyl-6-methoxy-5,8-diaminoquinoline. Subsequent dichromate oxidation gave 2-methyl-6-methoxy-5,8-quinolinequinone, which yielded the corresponding 2-methyl-6-alkylamino-5,8-quinolinequinone in good yield when treated with the appropriate alkylamine. The telrahydro-5,8-quinolinequinones were prepared by catalytic hydrogenation of the appropriate 5,8-quinolinequinones at elevated H₂ pressure followed by air oxidation of the reduction product. 7-(2′,6′,10′-Trimethylundecyl)-6-hydroxy-5,8-quinolinequinone was synthesized by radical alkylation of 6-hydroxy-5,8-quinolinequinone by thermal decomposition of di-3,7,11-trimethyldodecanoyl peroxide, which was prepared by a multistep procedure from farnesol. Of the five new 2-methyl-6-alkylamino-5,8-quinoline-quinones tested against P. berghei in mice (blood schizonticidal test), only 2-methyl-6-cycloheptylamino-5,8-quinolinequinone was active (T-C = 6.1 at 320 mg./kg.). Both 7-(2′,6′,10′-trimelhytundecyl)-6-hydroxy-5,8-quinolinequinone and the tetrahydro derivatives were inactive in this same test system.     

Synthesis and properties of polyimides,polyamides and poly(amide-imide)s from ether diamine having the spirobichroman structure

A novel spirobichroman unit containing dietheramine, 6,6′-bis(4-aminophenoxy)-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman ( 3 ), was prepared by the nucleophilic substitution of 6,6′-dihydroxy-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman with p-chloronitrobenzene in the presence of K₂CO₃ followed by hydrazine catalytic reduction of the intermediate dinitro compound. A series of polyimides were synthesized from diamine 3 and various aromatic dianhydrides by a conventional two-stage procedure through the formation of poly(amic-acid)s followed by thermal imidization. The intermediate poly(amic-acid)s had inherent viscosities of 1.00–2.78 dL/g. All the poly-(amic-acid)s could be thermally cyclodehydrated into flexible and tough polyimide films, and some polyimides were soluble in polar solvents such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), and N,N-dimethylformamide (DMF). These polyimides had glass transition temperatures (T_g) in the range of 236–256°C, and 10% weight loss occurred up to 450°C. Furthermore, a series of polyamides and poly(amide-imide)s with inherent viscosities of 0.71–2.29 dL/g were prepared by direct polycondensation of the diamine 3 with various aromatic dicarboxylic acids and imide ring-containing dicarboxylic acids by means of triphenyl phosphite and pyridine. All the polyamides and poly(amide-imide)s were readily soluble in polar solvents such as DMAc, and tough and flexible films could be cast from their DMAc solutions. These polymers had glass transition temperatures in the range of 137–228°C and 10% weight loss temperatures in the range of 419–443°C in air and 404–436°C in nitrogen, respectively. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1487–1497, 1997     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

6,6′‐Dimethoxygossypolone

6,6′‐Dimethoxygossypolone (systematic name: 7,7′‐dihydroxy‐5,5′‐diisopropyl‐6,6′‐dimethoxy‐3,3′‐dimethyl‐1,1′,4,4′‐tetraoxo‐2,2′‐binaphthalene‐8,8′‐dicarbaldehyde), C₃₂H₃₀O₁₀, is a dimeric molecule formed by oxidation of 6,6′‐dimethoxygossypol. When crystallized from acetone, 6,6′‐dimethoxygossypolone has monoclinic (P2₁/c) symmetry, and there are two molecules within the asymmetric unit. Of the four independent quinoid rings, three display flattened boat conformations and one displays a flattened chair/half‐chair conformation. The angles between the planes of the two bridged naphthoquinone structures are fairly acute, with values of about 68 and 69°. The structure has several intramolecular O—H...O and C—H...O hydrogen bonds and several weak intermolecular C—H...O hydrogen bonds, but no intermolecular O—H...O hydrogen bonds.     

Synthesis and characterization of fluoropolymers by the polyaddition of bis(epoxide)s with dicarboxylic acids and diols

The synthesis and characterization of the fluoropolymers poly 1a – 1d and poly 2a – 2d with pendant hydroxyl groups were examined. The polyaddition of bis(epoxide)s [2,2′‐bis(4‐glycidyletherphenyl)hexafluoropropane and bisphenol A diglycidyl ether] with dicarboxylic acids (tetrafluoroterephthalic acid and terephthalic acid) and diols [2,2′‐bis(4‐hydroxyphenyl)hexafluoropropane, 2,2′,3,3′,5,5′,6,6′‐octafluoro‐4,4′‐biphenol, 1,4‐bis(hexafluorohydroxyisopropyl)benzene, and 1,3‐bis(hexafluorohydroxyisopropyl)benzene] was carried out at 50–100 °C for 6–48 h in the presence of quaternary onium salts (tetrabutylammonium bromide, tetrabutylammonium chloride, tetrabutylphosphonium bromide, and tetrabutylphosphonium chloride; 2.5 mol %) as catalysts in dimethyl sulfoxide, N‐methylpyrrolidone, dimethylformamide, dimethylacetamide, dioxane, diglyme, o‐dichlorobenzene, chlorobenzene, and toluene to afford the corresponding polymers, poly 1a – 1d and poly 2a – 2d , with number‐average molecular weights of 11,000–59,400 in 45–97% yields. The solubility of the obtained polymers was good, and their thermal stability might be assumed from their structures. A linear relationship was observed between the contents of the fluorine atoms and the refractive indices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1395–1404, 2002     

双邻位甲基取代的聚芳醚酮合成与表征

两种单体 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基二苯酮 (o M2 DPOBP)和 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基三苯二酮 (o M2 DPOTPDK) ,分别与对苯二甲酰氯 (TPC)和间苯二甲酰氯 (IPC)低温亲电溶液缩聚 ,合成了 4种含双邻位甲基侧基聚醚酮醚酮酮 (DM PEKEKK和DM PEKEKMK)及含双邻位甲基侧基聚醚酮酮醚酮酮 (DM PEKKEKK和DM PEKKEKMK)聚合物 .用FT IR、1 H NMR、DSC、TGA、WAXD等方法对聚合物进行了表征 ,研究了聚合物的溶解性能 .结果表明 ,该 4种聚合物具有较高的玻璃化转变温度 ,良好的热稳定性和优良的溶解性能 .