Investigation on radical polymerization of 2-methylene-1,3-dioxolanes and 2-methylene-1,3-oxazolidines

The reaction of 2-methylene-1,3-dioxolanes and 2-methylene-1,3-oxazolidines with benzoyl peroxide (acceptor radical) and with N-ethylmaleimide (acceptor) was investigated. It was shown that benzoyl peroxide adds to monomers 1a and 1b , giving the corresponding linear diester amides 1a and 1b respectively. The oxazolidine 1c adds benzoyl peroxide, without ring opening, by addition to the exomethylene group. Together with N-ethylmaleimide the oxazolidines 1a or 1b produce deep-colored charge transfer complexes, resulting in high molecular poly-N-ethylmaleimides probably via a radical mechanism. The 1,3-dioxolanes 2a and 2b were radically polymerized to produce polyacetals by vinyl polymerization. 2c was polymerized to produce randomly containing acetal units and ester units. The mechanism of polymerization of 2e is complex, affording polymers of nonuniform character. 2-Methylene-4-phenyl-1,3-dioxolane polymerization leads to polyester as the main structure, and to a lesser degree polyacetal structures. The chemical structures of the polymers were confirmed by NMR spectra and elemental analysis. © 1996 John Wiley & Sons, Inc.     

The syntheses and NMR spectra of the twelve isomeric thieno[b]fused naphthyridines

Through the use of Pd(0)-catalyzed couplings between 2-(2-trimethylstannyl-3-pyridyl)-1,3-dioxolane, 3-trimethylstannyl-2-pyridine carboxaldehyde, 3-trimethylstannyl-4-pyridine carboxaldehyde and 4-trimethyl-stannyl-3-pyridine carboxaldehyde with t-butyl-N-(3-bromo-2-thienyl)carbamate, t-butyl-N-(2-bromo-3-thienyl)carbamate and t-butyl-N-(4-bromo-3-thienyl)carbamate in N,N-dimethylformamide at 100°, using cupric oxide as a coreagent, all twelve isomeric thieno[b]naphthyridines have been synthesized in an one-pot procedure. A detailed study of the ¹H and ¹³C nmr spectra of these isomers has been undertaken.     

A New Approach to the Synthesis of 2-Nitrobenzaldehyde. Reactivity and Molecular Structure Studies

 New approaches to the synthesis of 2-nitrobenzaldehyde by formation and selective isomer separation of 2-nitrophenyl-1,3-dioxolane and further hydrolysis are reported. In this route, the same acidic heterogeneous catalyst is used for 1,3-dioxolane formation and hydrolysis; it can be recycled several times without loss of efficiency. The ortho/meta isomers of 2-nitrophenyl-1,3-dioxolane can be separated by a combination of stereoselective crystallization and fractionated distillation. This new route reduces safety and environmental hazards in the synthesis of 2-nitro- and 3-nitro-benzaldehydes. The molecular structures of the nitro derivatives were confirmed by ¹H and ¹³C NMR spectroscopy. The results are in accordance with a non-coplanar conformer of the 2-nitro derivatives (2-nitrobenzaldehyde and 2-(2′-nitrophenyl)-1,3-dioxolane), where the nitro group is twisted with respect to the phenyl ring. In contrary, both the carbonyl and the nitro group are coplanar with the phenyl ring in 3-nitrobenzaldehyde. This result is consistent with the reactivity of the compounds.     

A New Approach to the Synthesis of 2-Nitrobenzaldehyde. Reactivity and Molecular Structure Studies

Summary.  New approaches to the synthesis of 2-nitrobenzaldehyde by formation and selective isomer separation of 2-nitrophenyl-1,3-dioxolane and further hydrolysis are reported. In this route, the same acidic heterogeneous catalyst is used for 1,3-dioxolane formation and hydrolysis; it can be recycled several times without loss of efficiency. The ortho/meta isomers of 2-nitrophenyl-1,3-dioxolane can be separated by a combination of stereoselective crystallization and fractionated distillation. This new route reduces safety and environmental hazards in the synthesis of 2-nitro- and 3-nitro-benzaldehydes. The molecular structures of the nitro derivatives were confirmed by ¹H and ¹³C NMR spectroscopy. The results are in accordance with a non-coplanar conformer of the 2-nitro derivatives (2-nitrobenzaldehyde and 2-(2′-nitrophenyl)-1,3-dioxolane), where the nitro group is twisted with respect to the phenyl ring. In contrary, both the carbonyl and the nitro group are coplanar with the phenyl ring in 3-nitrobenzaldehyde. This result is consistent with the reactivity of the compounds. Received January 22, 2001. Accepted (revised) July 18, 2001     

Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes and application in synthesis of new ortho-functionalized acetophenone derivatives

2-(4-Chlorophenyl)-2-methyl-1,3-dioxolane 2a was lithiated ortho to the ketal group by treatment with butyllithium in THF at 0°C. Related 2-aryl-2-methyl-1,3-dioxolanes possessing a chlorine substituent at the meta position of the aryl group 2b,c were lithiated with butyllithium in THF at −78°C at the position between the two directing groups. The lithio species thus generated were treated with various electrophiles to give ortho-functionalized acetophenone derivatives.     

Chemistry of Dioxacyclanes: VII. Synthesis of 1,3-Dioxolane Derivatives from 3-(2-Propenyloxy)propane-1,2-diol and Their Properties

2,4-Disubstituted 1,3-dioxolanes were synthesized by reactions of benzaldehyde, its para-chloro derivatives, as well as 3-cyclohexenecarboxaldehyde with 3-(2-propenyloxy)-1,2-propanediol. Theproducts were brought into bromination, dichlorocarbene addition, and epoxidation reactions. It is found that when both components of the heterogeneous reaction of dioxolane ring formation have a double bond, the acid catalyst in strongly deactivated.     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Multicomponent Hantzsch cyclocondensation as a route to highly functionalized 2- and 4-dihydropyridylalanines, 2- and 4-pyridylalanines, and their N-oxides: preparation via a polymer-assisted solution-phase approach

An improved and efficient entry to highly functionalized β-(2-pyridyl)- and β-(4-pyridyl)alanines and the corresponding 1,4-dihydro and N-oxide derivatives has been developed by one-pot thermal Hantzsch-type cyclocondensation of aldehyde-ketoester-enamine systems in which one of the reagents (aldehyde or ketoester) was carrying the unmasked but protected chiral glycinyl moiety. Thus coupling N-Boc-O-benzyl aspartate β-aldehyde, acetoacetate and aminocrotonate esters afforded tetrasubstituted β-(4-dihydropyridyl)alanines (75% yield). One of these products was almost quantitatively transformed into the β-(4-pyridyl)alanine derivative which in turn was oxidized to the corresponding N-oxide. Each of these enantiomerically pure (Mosher's amide analysis) heterocyclic α-amino acids was incorporated into a tripeptide by coupling with (S)-phenylalanine. In a similar way tetrasubstituted β-(2-dihydropyridyl)alanine, β-(2-pyridyl)alanine and β-(1-oxido-2-pyridyl)alanine were prepared via Hantzsch cyclocondensation reaction using benzaldehyde, aminocrotonate, and acetoacetate carrying the N-Boc-O-benzyl glycinate moiety. It was shown that the work up of the reaction mixtures derived from the cyclocondensation and oxidation reactions can be carried out by the use of polymer supported reagents and sequestrants thus allowing the isolation of the products in high purity without any chromatography.     

New Chiral Diamines of the Dioxolane Series: (+)-(4S,5S)-2,2-Dimethyl-4,5-bis(diphenylaminomethyl)- 1,3-dioxolane and (+)-(4S,5S)-2,2-Dimethyl-4,5-bis(methyl- aminomethyl)-1,3-dioxolane

The reaction of sodium diphenylamide with 2,2-dimethyl-4,5-bis(tosyloxymethyl)-1,3-dioxolane gave (+)-(4S,5S)-2,2-dimethyl-4,5-bis(diphenylaminomethyl)-1,3-dioxolane, which was brought into complex formation with cobalt chloride. Treatment of 2,2-dimethyl-4,5-bis(tosyloxymethyl)-1,3-dioxolane with sodium N-methylanilide resulted in cleavage of the SÄO bond in the p-toluenesulfonate moiety with formation of N-methyl-N-phenyl-p-toluenesulfonamide and 4,5-bis(hydroxymethyl)-2,2-dimethyl-1,3-dioxolane disodium salt. Diethyl (4R,5R)-2,2-dimethyl-1,3-dioxolane-4,5-dicarboxylate reacted with methylamine to give the corresponding dicarboxamide which was reduced with lithium aluminum hydride to (4S,5S)-2,2-dimethyl-4,5-bis(methylaminomethyl)-1,3-dioxolane having chiral carbon and nitrogen atoms.     

Acetalation and Ketalation Catalyzed by SO42-/TiO2-MoO3

The catalytic activities of SO42-/TiO2-MoO3 in synthesizing cyclohexanone ethylene ketal,cyclohexanone 1,2-propanediol ketal, 2-propyl-1,3-dioxolane, 4-methyl-2-isopropyl-1,3-dioxolane,2-isopropyl-1,3-dioxolane, 4-methyl-2-isopropyl-1,3-dioxolane, butanone ethy-lene ketal and butanone 1,2-propanediol ketal were reported. It has been demonstrated that SO42-/TiO2-MoO3 is an excellent catalyst. Various factors concerned in this reaction have been investigated. The optimum conditions have been found, that is, the molar ratio of aldehyde/ketone to alcohol was 1:1.5 or 1:1.3,the mass ratio of the catalyst used to the reactants was 0.25～1.5%, and the reaction time was 45～60 min. Under this conditions, the yield of cyclohexanone ethylene ketal is 82.7%, cyclohexanone 1,2-propanediol ketal is 83.4%, the yield of 2-propyl-1,3-dioxolane is 68.1%,4-methyl-2-isopropyl-1,3-dioxolane is 87.5%, the yield of 2-isopropyl-1,3-dioxolane is 70.7%,4-methyl-2-isopropyl-1,3-dioxolane is 82.5%, the yield of butanone ethylene ketal is 74.1%, and butanone 1,2-propanediol ketal is 94.9%.Some equation and experiment results concerned of the synthetic acetals or ketals were listed as follows.     

Preparation and radical ring-opening polymerization of 2-substituted-4-methylene-1,3-dioxolanes

2-Methyl-2-phenyl-4-methylene-1,3-dioxolane ( IIa ), 2-ethyl-2-phenyl-4-methylene-1,3-dioxolane ( IIb ), 2-phenyl-2-(n-propyl)-4-methylene-1,3-dioxolane ( IIc ), 2-phenyl-2-(i-propyl)-4-methylene-1,3-dioxolane ( IId ), 2-(n-heptyl)-2-phenyl-4-methylene-1,3-dioxolane ( IIe ), 2-methyl-2-(2-naphthyl)-4-methylene-1,3-dioxolane ( IIf ), and 2,2-diphenyl-4-methylene-1,3-dioxolane ( IIg ) were prepared and polymerized in the presence of a radical initiator. IIa–IIf were found to undergo vinyl polymerization with ring-opening reaction accompanying the elimination of ketone groups in bulk. IIg was found to undergo the quantitative ring-opening reaction accompanying the elimination of benzophenone in solution to obtain polyketone without any side reaction.     

Benzomorphan related compounds. XIV. Synthesis of 2-(2-pyrrolylmethyl)- and 2-(2-indolylmethyl)tetrahydropyridines and cyclization to pyrrolo[3,2-f]morphans

The synthesis of 2-{2-pyrrolylmethyl)- and 2-(2-indolylmethyl)tetrahydropyridines by condensation of 2-cyanopyridines with appropriate pyrrole or indole derivatives followed by ketone reduction, quaternization and sodium borohydride reduction are described. The acid-induced cyclization of 2-(2-pyrrolylmethyl)tetrahydropyridines affords 4,5,6,7,8,9-hexahydro-4,8-methanopyrrolo[2,3-d]azocine systems (pyrrolo[3,2-f]-morphans), although the method fails with N-benzyl substituted pyrroles. The acid treatment of 2-(2-indolylmethyl)tetrahydropyridines and of 2-indolyl tetrahydro-2-pyridyl ketones is not a suitable procedure for the preparation of indolo[3,2-f]morphans, because of the protonation of indole nucleus or carbonyl group, respectively.     

The synthesis of 1-substituted-2-(β-dimethylaminoethyl)benzimidazoles

2-(β-Dimethylaminoethyl)benzimidazoles have been prepared by the reduction of the corresponding 2-benzimidazole-N,N-dimethylacetamides. Condensation of ethyl cyanoacetate with N-benzyl or phenyl-o-phenylenediamines led to N-cyanoacetyl-N'-substituted-o-phenylenediamines, the structure of which were assigned from u.v. and n.m.r. data. An improved synthesis of benzimidazole - 2 - acetic acid derivatives, from substituted ethyl acetimidates and o-phenylenediamines, is described. Dimerisation of 1-phenyl-benzimidazole occurs in the presence of phenyllithium.     

Acetals and ethers,XVII. One- or two-step syntheses of 2-(2-alkoxyethyl)-1,3-dioxacyclanes

2-(2-Alkoxyethyl)-1,3-dioxanes (1) were prepared by ap-toluenesulfonic acid-catalyzed, one-step reaction of propenal with a mixture of aliphatic alcohol and trimethylene glycol in good yields. The transacetalization reaction of 1,1,3-trialkoxypropanes (3) with ethylene glycol or propylene-(1,2)glycol afforded good yields of pure 2-(2-alkoxyethyl)-1,3-dioxolanes (5 or6), respectively. This reaction proceeds through an intermediate 1,3-dialkoxy-1-(2-hydroxyalkoxy)-propane.

---

Ein- oder Zweistufensynthese von 2-(2-Alkoxyethyl)-1,3-dioxacyclanen

Zusammenfassung In der durchp-Toluolsulfonsäure — katalysierten, direkten Reaktion von Propenal mit einem Gemisch von aliphatischem Alkohol und Trimethylenglykol wurden die entsprechenden 2-(2-Alkoxyethyl)-1,3-dioxane (1) in guten Ausbeuten erhalten. Die Umacetalisierung von 1,1,3-Trialkoxypropanen (3) mit Ethylenglykol oder 1,2-Propylenglykol lieferte 2-(2-Alkoxyethyl)-1,3-dioxolane (5 oder6) in guten Ausbeuten. Die Umacetalisierungsreaktion von 1,1,3-Trialkoxypropanen verläuft über 1,3-Dialkoxy-1-(2-hydroxyalkoxy)-propane als Zwischenprodukte.

     

5-Methyl-4H-1,3-dioxins,new chiral building blocks: transformation into (R)- and (S)-4-hydroxymethyl-4-methyl-1,3-dioxolanes via oxidation and rearrangement and determination of the absolute configuration

5-Methyl-4H-1,3-dioxins obtained by asymmetric double-bond isomerization have been transformed into 4-hydroxymethyl-4-methyl-1,3-dioxolanes by m-chloroperbenzoic acid oxidation, ring contraction and reduction. The stereochemical course of this transformation has been studied, while the relative configuration of the intermediate oxidation product and the absolute configuration of the resulting camphanyl ester of 2-tert-butyl-4-hydroxymethyl-4-methyl-1,3-dioxolane was established by X-ray crystallography. From these results, the absolute configuration of the dioxins has been deduced.     

Synthesis and 13C NMR spectra of cis- and trans-{2-(haloaryl)-2-[(1H-imidazol)-1-yl]methyl]}-1,3-dioxolane-4-methanols

Syntheses and ¹³C nmr spectra of a number of cis and trans 2-(haloaryl)-2-[(1H-imidazol-1-yl)rnethyl]-4-(hydroxymethyl)-1,3-dioxolanes are described. The haloaryl groups are 2,4-dichloro, 2,4-difluoro-, 4-chloro-and 4-bromophenyl. In these series, some of the cis compounds become available through crystalline bromo benzoates 5 . Separations of some trans isomers are achieved through fractional crystallizations of imidazolyl benzoate nitrates 6 . Stereochemical assignments are based primarily on one major ¹³C chemical shift difference, namely that of C-4 of the 1,3-dioxolane ring, the chemical shift of the trans isomers being 1.0-2.5 ppm downfield from that of the cis isomers.     

Synthesis of aryl 3-(2-imidazolyl)propyl ketones

The approach to the title compounds was via lithiation-substitution of N-methyl or N-(triphenylmethyl)-imidazole by some iodo ketals. 4-Chloro-4′-halobutyrophenones (halo = F, Cl, Br) were converted by sodium iodide to the corresponding aliphatic iodides which were subsequently ketalized with ethylene glycol to provide the corresponding iodo ketals. Lithiation of either 1-methyl- or 1-(triphenylmethyl)imid-azole with N-butyllithium generated the corresponding 2-lithioimidazoles, in situ, which were then reacted with these iodo ketals to form the corresponding C-2 substituted imidazoles. Dilute aqueous acid hydrolysis released the ketone from the ketal. For N-triphenylmethyl protected imidazoles, the triphenylmethyl group was also hydrolyzed to give triphenylmethanol and 3-(2-imidazolyl)propyl 4-haloaryl ketones. These N-unsubstituted imidazolyl ketones can be alkylated independently with triphenylmethyl chloride to form the corresponding N-triphenylmethyl imidazole derivatives.     

Synthesis and characterization of acrylated phosphonates and their polymers having 1,3-dioxolane and 1,3-dioxane moieties derived from brominated cyclic acetals of polyols through the Arbuzov reaction. II

Glycerol, D -mannitol, and D -sorbitol were converted into their mono- and di-O-1,3-dioxolane and 1,3-dioxane bromoethylidene derivatives through a transacetalation reaction with bormoacetaldehyde diethyl acetal under controlled conditions. These brominated dioxolane or dioxane derivatives were subsequently phosphonylated through the Arbuzov reaction. The phosphonylated cyclic acetals were used as precursors for the synthesis of acrylated phosphonate monomers. All these compounds have been characterized by elemental analysis and spectroscopic (IR, ¹H-,¹³C-, ³¹P-NMR and mass) methods. A mixture of 1,3-dioxane and 1,3-dioxolane derivatives was obtained with D -sorbitol, whereas the reaction products with glycerol and D -mannitol yielded primarily the 1,3-dioxolane derivatives. The acrylated phosphonates of glycerol and mannitol have been polymerized and studied on the basis of gel permeation chromatography and their spectral and thermal properties. The acrylated phosphonates, monomers, and polymers, were shown to have a large capacity to solvate and dissolve heavy metal salts. This results in a dramatic increase (> 100°C) of the glass transition temperature of these polymers.     

Vinyl Ethers Containing an Epoxy Group: XXII. Synthesis and Base-Catalyzed Transformations of 1-(Allyloxy)- and 1-[2-(Vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols

Reactions of 2-(allyloxymethyl)- and 2-[2-(vinyloxy)ethoxy]methyloxiranes with 2-propynol (～3 wt % of t-BuOK, 75–85°C, 5–10 h) lead to formation of new 1-organyloxy-3-(2-propynyloxy)propan-2-ols (yield 65–95%). On heating to 45–100°C in the presence of bases (KOH, t-BuOK), 1-allyloxy- and 1-[2-(vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols are transformed into the corresponding 2-vinyl-1,3-dioxolane, 6-methyl-2,3-dihydro-1,4-dioxine, 6-methylene-1,4-dioxane, and 2,3-dihydro-5H-1,4-dioxepine derivatives, whose yield and ratio strongly depend on the solvent nature, catalyst, and substituent at the hydroxy group. 2-Vinyl-1,3-dioxolane and 6-methyl-2,3-dihydro-1,4-dioxine derivatives are formed as the major products (yield 70–99%) in the presence of t-BuOK in aprotic media (toluene, THF, DMSO) or in the absence of a solvent as a result of prototropic isomerization followed by intramolecular heterocyclization. Intramolecular nucleophilic cyclization of 3-(2-propynyloxy)propan-2-ols to 6-methylene-1,4-dioxane is the predominant process in water in the presence of KOH. In all cases, the fraction of 2,3-dihydro-5H-1,4-dioxepine derivatives among the cyclization products ranges from 0 to 5% (KOH) or to 14% (t-BuOK).