Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium

For the specific slip geometry of two sets of coplanar systems (a total of four systems) in fcc metals, the range of dislocation networks in boundaries aligned with one of the two active slip planes is predicted from the Frank equation for boundaries free of long-range elastic stresses. Detailed comparison with experimental data for eight dislocation boundaries in cold-rolled aluminium grains of the 45° ND rotated Cube orientation is conducted. It is concluded that the boundaries are Low-Energy Dislocation Structures, which are in good agreement with the Frank equation while also lowering the energy by dislocation reactions. Cross slip plays a role in the boundary formation process.     

Evaluating the effects of loading parameters on single-crystal slip in tantalum using molecular mechanics

This study is aimed at developing a physics-based crystal plasticity finite element model for body-centred cubic (BCC) metals, through the introduction of atomic-level deformation information from molecular dynamics (MD) investigations of dislocation motion at the onset of plastic flow. In this study, three critical variables governing crystal plasticity mediated by dislocation motion are considered. MD simulations are first performed across a range of finite temperatures up to 600K to quantify the temperature dependence of critical stress required for slip initiation. An important feature of slip in BCC metals is that it is not solely dependent on the Schmid law measure of resolved shear stress, commonly employed in crystal plasticity models. The configuration of a screw dislocation and its subsequent motion is studied under different load orientations to quantify these non-Schmid effects. Finally, the influence of strain rates on thermal activation is studied by inducing higher stresses during activation at higher applied strain rates. Functional dependence of the critical resolved shear stress on temperature, loading orientation and strain rate is determined from the MD simulation results. The functional forms are derived from the thermal activation mechanisms that govern the plastic behaviour and quantification of relevant deformation variables. The resulting physics-based rate-dependent crystal plasticity model is implemented in a crystal plasticity finite element code. Uniaxial simulations reveal orientation-dependent tension–compression asymmetry of yield that more accurately represents single-crystal experimental results than standard models.     

Transformations of Dislocation Substructures under Fatigue Loading

Research literature on dislocation substructures formed in fcc metals and alloys under fatigue loading is reviewed. The materials are classified into three groups according to the types of dislocation substructures formed at the onset of fatigue loading and transformation sequences occurring on further loading. Quantitative results obtained from investigations of the evolution pattern of the defect subsystem formed under fatigue loading are examined.     

Slip band formation and mobile dislocation density generation in high rate deformation of single fcc crystals

The mechanisms for the nucleation, thickening, and growth of crystallographic slip bands from the sub-nanoscale to the microscale are studied using three-dimensional dislocation dynamics. In the simulations, a single fcc crystal is strained along the [111] direction at three different high strain rates: 10⁴, 10⁵, and 10⁶?s^??1. Dislocation inertia and drag are included and the simulations were conducted with and without cross-slip. With cross-slip, slip bands form parallel to active (111) planes as a result of double cross-slip onto fresh glide planes within localized regions of the crystal. In this manner, fine nanoscale slip bands nucleate throughout the crystal, and, with further straining, build up to larger bands by a proposed self-replicating mechanism. It is shown that slip bands are regions of concentrated glide, high dislocation multiplication rates, and high dislocation velocities. Cross-slip increases in activity proportionally with the product of the total dislocation density and the square root of the applied stress. Effects of cross-slip on work hardening are attributed to the role of cross-slip on mobile dislocation generation, rather than slip band formation. A new dislocation density evolution law is presented for high rates, which introduces the mobile density, a state variable that is missing in most constitutive laws.     

Energy barriers associated with slip–twin interactions

The energetics of slip–coherent twin boundary (CTB) interactions are established under tensile deformation in face centered cubic (fcc) copper with molecular dynamics simulations, exploring the entire stereographic triangle. The CTBs serve as effective barriers in some crystal orientations more than others, consistent with experimental observations. The resulting dislocation structures upon slip–twin reactions are identified in terms of Burgers vector analysis. Visualization of the dislocation transmission, lock formation, dislocation incorporation to twin boundaries, dislocation multiplication at the matrix–twin interface and twin translation, growth, and contraction behaviors cover the most significant reactions that can physically occur providing a deeper understanding of the mechanical behavior of fcc alloys in the presence of twin boundaries. The results make a distinction between deformation and annealing twins interacting with incident dislocations and point to the considerable role both types of twins can play in strengthening of fcc metals.     

Strain Rate Sensitivities of Face-Centred-Cubic Metals Using Molecular Dynamics Simulation

We use dislocation theory and molecular dynamics （MD） simulations to investigate the effect of atom properties on the macroscopic strain rate sensitivity of f cc metals. A method to analyse such effect is proposed. The stress dependence of dislocation velocity is identified as the key of such study and is obtained via 2-D MD simulations on the motion of an individual dislocation in an fcc metal. Combining the simulation results with Orowan＇s relationship, it is concluded that strain rate sensitivities of fcc metals are mainly dependent on their atomic mass rather than the interatomic potential. The order of strain rate sensitivities of five fcc metals obtained by analysing is consistent with the experimental results available.     

Dislocation dynamic modelling of the brittle–ductile transition in tungsten

Brittle–ductile transitions in metals, ceramics and semiconductors are closely connected with dislocation activity emanating near to crack-tips. We have simulated the evolution of crack-tip plasticity using a two-dimensional dislocation dynamics model which has been developed to include two symmetric slip planes intersecting the crack-tip, and applied to single-crystal tungsten. The dislocation mobility law used was physically based on double-kink nucleation on screw dislocations, with an activation energy reduced by the local stress. Even in the strong stress gradients near a crack-tip, the dislocations are found to self-organise so that the internal stress in the array is effectively constant with time and position over a wide range of strain rates and temperatures. The resultant net activation energy for dislocation motion is found to be constant and close to the activation energy experimentally measured for the brittle–ductile transition. Use of a fracture criterion based on the local crack-tip stress intensity factor, as modified by the stresses from the emitted dislocations, allows explicit prediction of the form and temperature of the brittle–ductile transition. Predictions are found to be in very close agreement with experiment.     

Irradiation hardening of reactor pressure vessel steels due to the dislocation loop evolution

The irradiation hardening of reactor pressure vessel steels due to the formation of dislocation loops is analyzed. The analysis is based on the original model for the nucleation and subsequent evolution of dislocation loops in irradiated materials. The loop formation in displacement cascades is taken into account, along with the homogeneous clustering of point defects. The loop evolution is shown to contribute mainly to the athermal component of the yield stress, which is determined by interaction of gliding dislocations with strong barriers. Irradiation-induced hardening is evaluated as a function of irradiation dose and temperature, dose rate, material parameters and initial microstructure. The model results are compared with experimental data for neutron irradiated pressure vessel steels of various grades and with empirical low power expressions of the yield stress increase with increasing irradiation dose.     

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

Previous studies have revealed that dislocation structures in metals with medium-to-high stacking fault energy, depend on the grain orientation and therefore on the slip systems. In the present work, the dislocations in eight slip-plane-aligned geometrically necessary boundaries (GNBs) in three grains of near 45° ND rotated cube orientation in lightly rolled pure aluminium are characterized in great detail using transmission electron microscopy. Dislocations with all six Burgers vectors of the ½?1?1?0? type expected for fcc crystals were observed but dislocations from the four slip systems expected active dominate. The dislocations predicted inactive are primarily attributed to dislocation reactions in the boundary. Two main types of dislocation networks in the boundaries were identified: (1) a hexagonal network of the three dislocations in the slip plane with which the boundary was aligned; two of these come from the active slip systems, the third is attributed to dislocation reactions (2) a network of three dislocations from both of the active slip planes; two of these react to form Lomer locks. The results indicate a systematic boundary formation process for the GNBs. Redundant dislocations are not observed in significant densities.     

Micromechanistic origin of irradiation-assisted stress corrosion cracking

A multi-scale study of the micromechanics of dislocation–grain boundary interactions in proton and ion-irradiated stainless steels is presented. Interactions of dislocation channels with grain boundaries result in slip transfer, discontinuous slip without or with slip along the grain boundary. The presence of the irradiation damage enhances the importance of the magnitude of the resolved shear stress on the slip system activated by the grain boundary to transfer slip across it. However, the selected slip system is still determined by the minimization of the grain boundary strain energy density condition. These findings have implications for modelling the mechanical properties of irradiated metals as well as in establishing the mechanism for disrupting the grain boundary oxide, which is a necessary prerequisite for irradiation-assisted stress corrosion cracking.     

Continuum model for dislocation dynamics in a slip plane

In this paper, we present a continuum model for dislocation dynamics in a slip plane, which accurately incorporates both the long-range interaction and the local line tension effect of dislocations. Unlike the continuum models in the literature using dislocation densities, we use the disregistry across the slip plane to represent the continuous distribution of dislocations in the slip plane, which has the advantage of including the orientation dependence of dislocations in a very simple way. The continuum dislocation dynamics model is validated by linear instability analysis of a uniform dislocation array to small perturbations and comparisons of the results with those of the discrete dislocation dynamics model. Numerical examples for the evolution of distributions of dislocations and plastic slips in a slip plane are presented.     

Explicit incorporation of cross-slip in a dislocation density-based crystal plasticity model

We present a crystal plasticity model that incorporates cross-slip of screw dislocations explicitly based on dislocation densities. The residence plane of screw dislocations is determined based on a probability function defined by activation energy and activation volume of cross-slip. This enables the redistribution of screw-dislocations and dislocation density patterning due to the effect of stacking fault energy. The formulation is employed for explaining the cross-slip phenomenon in aluminium during uniaxial tensile deformation of ?100? single crystal and a single slip orientation of single crystal, and compare the results with experimental observations. The effect of cross-slip on the stress–strain evolution is seen using this explicit treatment of cross-slip.     

The effect of shear stress on the screw dislocation core in bcc metals

The screw dislocation core structure in bcc metals under an external shear stress is investigated using the model of generalized splitting as an approximation of the Peierls-Nabarro model of screw dislocation dissociated on three {110} slip planes. The shear stress for which the core structure in this model is unstable is found.     

Dislocation dynamics in cyclic plastic deformation

The paper presents a theoretical investigation of the slip avalanches (so-called strain bursts) which occur in single-glide-orientated face-centered cubic or hexagonal close-packed metals during stress-amplitude-controlled cyclic plastic deformation. The study is based on a model of the dynamics of dislocations that has been developed in a companion paper (Part I). It is shown that this model allows for a quantitative treatment of the strain-burst phenomenon. In particular, the scaling relations between different strain-burst-characteristic parameters which have been found by experiment are connected to the evolution of the dislocation microstructure and thus find a natural explanation.     

A new model of solution hardening in fcc metals based on the interaction with plural obstacles

A new model of solution hardening in fcc metals assumes that dislocation motion is controlled by a thermal activation process. In the model, the interaction of a dislocation with plural solute atoms is taken into account in a single activation event. The actual number of solute atoms which are involved in an activation event is determined by minimizing the activation energy. The model predicts a temperature dependence for the flow stress that agrees reasonably well with experimental results. Especially, it predicts the appearance of an inverse temperature dependence of the flow stress in the low-temperature region. Thus, the anomalous lowering of the flow stress at low temperatures, observed in some dilute alloys, can be explained solely by the dislocation–solute atom interaction. This is to be compared with the conventional explanation, in which another cause, the so-called inertial effect, was invoked. Another feature of the new model is that it provides a simple explanation for the occurrence of the stress equivalence phenomenon.     

Nucleation of deformation twins in nanocrystalline fcc alloys

An earlier dislocation model for predicting the grain size effect on deformation twinning in nanocrystalline (nc) face-centred-cubic (fcc) metals has been found valid for pure metals but problematic for alloys. The problem arises from the assumption that the stacking-fault energy (γ_SF) is twice the coherent twin-boundary energy (γ_fcc), which is approximately correct for pure fcc metals, but not for alloys. Here we developed a modified dislocation model to explain the deformation twinning nucleation in fcc alloy systems, where γ_SF ≠ 2γ_twin. This model can explain the differences in the formations of deformation twins in pure metals and alloys, which is significant in low stacking-fault energy alloys. We also describe the procedure to calculate the optimum grain size for twinning in alloy systems and present a method to estimate γ_twin.     

Yield stress of nanocrystalline materials: role of grain-boundary dislocations,triple junctions and Coble creep

A theoretical model is suggested which describes the strengthening of nanocrystalline materials due to the effects of triple junctions of grain boundaries as obstacles for grain-boundary sliding. In the framework of the model, a dependence of the yield stress characterizing grain-boundary sliding on grain size and triple-junction angles is revealed. With this dependence we have found that, in as-fabricated nanocrystalline materials, the yield stress depends upon a competition between conventional dislocation slip and grain-boundary sliding. On the other hand, yield stress dependence on grain size in heat-treated nanocrystalline materials is described as that caused by a competition between conventional dislocation slip and Coble creep. Grain-size and triple-junction angle distributions are incorporated into the consideration to account for distributions of grain size and triple-junction angles, occurring in real specimens. The results of the model are compared with experimental data from as-fabricated and heat-treated nanocrystalline materials and shown to be in good agreement.     

A model for the dynamics of loop drag by a gliding dislocation

Clusters of self-interstitial atoms are formed in metals by high-energy displacement cascades, often in the form of small dislocation loops with a perfect Burgers vector. In isolation, they are able to undergo fast, thermally activated glide in the direction of their Burgers vector, but do not move in response to a uniform stress field. The present work considers their ability to glide under the influence of the stress of a gliding dislocation. If loops can be dragged by a dislocation, it would have consequences for the effective cross-section for dislocation interaction with other defects near its glide plane. The lattice resistance to loop drag cannot be simulated accurately by the elasticity theory of dislocations, so here it is investigated in iron and copper by atomic-scale computer simulation. It is shown that a row of loops lying within a few nanometres of the dislocation slip plane can be dragged at very high speed. The drag coefficient associated with this process has been determined as a function of metal, temperature and loop size and spacing. A model for loop drag, based on the diffusivity of interstitial loops, is presented. It is tested against data obtained for the effects of drag on the stress to move a dislocation and the conditions under which a dislocation breaks away from a row of loops.     

Temperature-dependent critical resolved shear stress model for (Cu–Au)–Co alloys in pure shear mode

Based on a limited energy storage viewpoint proposed by our team, it is assumed that there is a maximum constant value for the maximum storage of energy per unit volume when dislocation slip starts in a metal. A temperature-dependent critical resolved shear stress (CRSS) model without any fitting parameters is developed for metals in a pure shear mode. The CRSSs of Cu, Cu–Au, Cu–Co and Cu–Au–Co in the pure shear mode are predicted, and are in excellent agreement with the experimental results. This work offers an approach to predict the temperature-dependent CRSS for metals in the pure shear mode.