Thermal analysis of precipitation reactions in a Ti–25Nb–3Mo–3Zr–2Sn alloy

A study was undertaken on a Ti–25Nb–3Mo–3Zr–2Sn alloy using differential scanning calorimetry (DSC) in order to improve understanding of the precipitation reactions occurring during aging heat treatments. The investigation showed that isothermal ω phase can be formed in the cast and solution treated alloy at low aging temperatures. An exothermic peak in the temperature range of 300 to 400°C was detected for precipitation of the ω phase, with approximate activation energy of 176 kJ/mol. The ω phase begins to dissolve at temperatures around 400°C and precipitation of the α phase is favoured at higher temperatures between 400°C and 600°C. An exothermic peak with activation energy of 197 kJ/mol was measured for precipitation of the α phase. Deformation resulting in the formation of the stress induced α″ phase altered the DSC heating profile for the solution treated alloy. The exothermic peak associated with precipitation of the ω phase was not detected during heating of the deformed material and increased endothermic heating associated with recovery and recrystallisation was observed.     

Aleksei Borisovich Kaidalov (July 20, 1940–July 25, 2010)

Physics of Atomic Nuclei -     

ICEMS study of isothermal oxidation of Fe–Mn–Al–C–Cr–Si–Mo, Fe–Mn–Al–C–Cr–Si and Fe–9Cr–1Mo alloys

The purpose of this paper is to investigate the isothermal behavior of Fe–27.3Mn–7.6Al–C–6.5Cr–0.25Si–0.88Mo (Mo(0)) and Fe–27.3Mn–7.6Al–1.0C–6.5Cr–0.25Si (Mo(1)) alloys and compare it against Fe–9Cr–1Mo (FCR) commercial alloy. The experiments were carried out at 600°C, 700°C, 750°C and 850°C, each one during 72 h in static air. The oxidation kinetics was measured as a function of time using a Thermogravimetry analyzer (TGA). The structure and composition of the oxide scale were characterized by X-ray diffraction (XRD) and Integral Conversion Electron Mössbauer Spectroscopy (CEMS). The TGA results show that at all oxidation temperatures the sample FCR exhibit the lowest kinetic corrosion and the lowest weight gain, whereas Mo(0) the highest. By CEMS technique it were found a broad magnetic sextet, which has been fit by one hyperfine field distribution with mean hyperfine field characteristic to ferritic/martensite phase, one Fe^3?+? doublet and one singlet for the Mo(0) and Mo(1) alloys. Samples oxidized at highest temperatures exhibit a strong paramagnetic line, probably due that the Cr or Mn oxides may be enriched on the surface. Then, the magnetic phase can be converted partially into austenite phase at highest temperatures.     

Performance of a polarizer using synthetic mica crystal in the 12–25 nm wavelength range

To develop polarizer functioning in the extreme ultraviolet (EUV) and soft X-ray region, the polarization performance of synthetic mica has been investigated theoretically with a simulation code using Fresnel equations and optical constants from the Henke database. The reflectance of synthetic mica crystal for s and p polarization was measured to investigate its polarization performance in a home-made synchrotron radiation soft X-ray polarimeter at beamline 3W1B, Beijing Synchrotron Radiation Facility (BSRF...     

The 25Mg(p, γ)26Al and 25Mg(p,p′) resonances for Ep = 0.31–1.84 MeV

Thin target yield curves with good statistics have been measured for the ²⁵Mg(p, γ)²⁶Al and ²⁵Mg(p, p′)²⁵Mg reactions in the E_p = 310–1845 keV region. Altogether 76 resonances have been observed, of which 45 only in (p, γ), 30 in both (p, γ) and (p, p′), and one only in (p, p′). Several of these resonances had not been observed previously in either of the two reactions, and several of the previously observed resonances turned out to be doublets. All 39 ²⁵Mg(p, p₀)²⁵Mg resonances found previously in the E_p = 700–1845 keV region resonate in (p, γ) and many also in (p, p′). Resonance strengths have been derived relative to that of the E_p = 593 keV resonance.The analysis of weak (p, p₁) and (p, p₂) resonance yields has been supported by a calculation of the yields in the continuum (in between resonances) due to the Breit-Wigner tails of strong and broad resonances in the neighbourhood (with interference between resonances with the same J^π; T taken into account), and to Coulomb excitation.     

Characterization of bismuth–tin–lead and bismuth–tin–lead–cadmium fusible alloys

Microstructure, electrical, mechanical and thermal properties of quenched bismuth–tin eutectic, Rose (Bi₅₀Sn_22.9Pb_27.1) and Wood’s (Bi₅₀Sn_12.5Pb₂₅Cd_12.5) alloys have been investigated using scanning electron microscopy, X-ray diffraction analysis, the double bridge method, the dynamic resonance method, Vickers hardness measurement and thermal analysis. Wood’s alloy (Bi–Pb–Sn–Cd) has low electrical resistivity and melting point but a high elastic modulus and internal friction when compared with the Rose (Bi–Pb–Sn) alloy. The presence of cadmium in Wood’s alloy decreases its melting point and electrical resistivity with an increase in its elastic modulus, which improves the mechanical properties. Wood’s alloy (Bi–Pb–Sn–Cd) has better properties, which make it useful in various applications such as in protection shields for radiotherapy, locking of mechanical devices and welding at low temperature.     

Electro-optic metal–insulator–semiconductor–insulator–metal Mach-Zehnder plasmonic modulator

The performance of a CMOS-compatible electro-optic Mach-Zehnder plasmonic modulator is investigated using electromagnetic and carrier transport simulations. Each arm of the Mach-Zehnder device comprises a metal–insulator–semiconductor–insulator–metal (MISIM) structure on a buried oxide substrate. Quantum mechanical effects at the oxide/semiconductor interfaces were considered in the calculation of electron density profiles across the structure, in order to determine the refractive index distribution and its dependence on applied bias. This information was used in finite element simulations of the electromagnetic modes within the MISIM structure in order to determine the Mach-Zehnder arm lengths required to achieve destructive interference and the corresponding propagation loss incurred by the device. Both inversion and accumulation mode devices were investigated, and the layer thicknesses and height were adjusted to optimise the device performance. A device loss of <8 dB is predicted for a MISIM structure with a 25 nm thick silicon layer, for which the device length is <3 μm, and <5 dB loss is predicted for the limiting case of a 5 nm thick silicon layer in a 1.2 μm long device: in both cases, the maximum operating voltage is 7.5 V.     

Chern–Simons–Rozansky–Witten topological field theory

We construct and study a new topological field theory in three dimensions. It is a hybrid between Chern–Simons and Rozansky–Witten theory and can be regarded as a topologically-twisted version of the N=4$N=4$d=3$d=3$ supersymmetric gauge theory recently discovered by Gaiotto and Witten. The model depends on a gauge group G and a hyper-Kähler manifold X with a tri-holomorphic action of G. In the case when X is an affine space, we show that the model is equivalent to Chern–Simons theory whose gauge group is a supergroup. This explains the role of Lie superalgebras in the construction of Gaiotto and Witten. For general X, our model appears to be new. We describe some of its properties, focusing on the case when G is simple and X is the cotangent bundle of the flag variety of G. In particular, we show that Wilson loops are labeled by objects of a certain category which is a quantum deformation of the equivariant derived category of coherent sheaves on X.     

Magnetic and structural transition of Ni50+xMn25−x/2Ga25−x/2 (x=2–5) alloys

Magnetic and structural transitions of non-stoichiometric Ni_50+xMn_25−x/2Ga_25−x/2 (x=2–5) alloys are systematically investigated. Differential scanning calorimetry and modified thermogravimetry (TG) are used to measure magnetic and structural transitions simultaneously. The structural transition temperatures increase monotonically with increasing Ni substitution for Mn and Ga. Different magnetic transition sequences on heating were observed from ferromagnetic martensite to ferromagnetic autensite, then to paramagnetic autensite, from ferromagnetic martensite to paramagnetic austensite or from ferromagnetic martensite to paramagnetic martensite, respectively. Three kinds of NiMnGa alloys were obtained according to the sequence of the structural and magnetic transition, whose structural transition temperatures are lower, equal to or higher than the magnetic transition temperatures.     

Hardness and microstructural variation of Al–Mg–Mn–Sc–Zr alloy

Variations of Vickers hardness were observed in Al–Mg–Mn alloy and Al–Mg–Mn–Sc–Zr alloy at different ageing times, ranging from a peak value of 81.2 HV at 54 ks down to 67.4 HV at 360 ks, below the initial hardness value, 71.8 HV at 0 ks for the case of Al–Mg–Mn–Sc–Zr alloy. Microstructures of samples at each ageing stage were examined carefully by transmission electron microscopes (TEMs) both in two-dimensions and three-dimensions. The presence of different types, densities, and sizes of particles were observed dispersed spherical Al₃Sc_1−xZr_x and also block-shaped Al₃Sc precipitates growing along <1 0 0>_Al with facets {1 0 0} and {1 1 0} of the precipitates. TEM analysis both in two-dimensions and three-dimensions, performed on various samples, confirmed the direct correlation between the hardness and the density of Al₃Sc.     

Plastic deformation properties of Zr–Nb–Ti–Ta–Hf high-entropy alloys

We have investigated the plastic deformation properties of single-phase Zr–Nb–Ti–Ta–Hf high-entropy alloys from room temperature (RT) up to 300 °C. Uniaxial deformation tests at a constant strain rate of 10^?4?s^?1 were performed, including incremental tests such as stress relaxations, strain-rate changes, and temperature changes in order to determine the thermodynamic activation parameters of the deformation process. The microstructure of deformed samples was characterized by transmission electron microscopy. The strength of the investigated Zr–Nb–Ti–Ta–Hf phase is not as high as the values frequently reported for high-entropy alloys in other systems. At RT we measure a flow stress of about 850 °C. We find an activation enthalpy of about 1 eV and a stress dependent activation volume between 0.5 and 2 nm³. The measurement of the activation parameters at higher temperatures is affected by structural changes evolving in the material during plastic deformation.     

A golden point rule in rock–paper–scissors–lizard–spock game

We study a novel five-species system on two-dimensional lattices when each species have two superior and two inferior partners. Here we simplify the huge parameter space of predation probability to only two parameters. Both of Monte Carlo simulation and Mean Field Theory reveal that two of strategies may die out when the ratio of the two parameters is close to the golden point 0.618, and the remaining three strategies are provided a cyclic dominance system.     

The Hintermann–Merlini–Baxter–Wu and the infinite-coupling-limit Ashkin–Teller models

We show how the Hintermann–Merlini–Baxter–Wu model (which is a generalization of the well-known Baxter–Wu model to a general Eulerian triangulation) can be mapped onto a particular infinite-coupling-limit of the Ashkin–Teller model. We work out some mappings among these models, also including the standard and mixed Ashkin–Teller models. Finally, we compute the phase diagram of the infinite-coupling-limit Ashkin–Teller model on the square, triangular, hexagonal, and kagome lattices.     

Study of inverse a.c. Josephson effect in Y–Ba–Cu–O and Y–8a–Sr–Cu–O

Microwave induced d.c. voltage due to inverse a.c. Josephson effect has been observed across bulk samples of Y-Ba-Cu-O and Y-Ba-Sr-Cu-O. The d.c. voltage is found to vary with microwave power, frequency and also with small external magnetic fields. Although the resistivity curve of Y-Ba-Cu-O does not show any appreciable resistance drop around 230 K, the microwave induced d.c. voltage due to the inverse a.c. Josephson effect has been found to exist upto 230 K. The resistivity behaviour of Y-Ba-Sr-Cu-O shows a sharp resistivity drop above 230 K. In this sample the inverse Josephson effect is found to exist upto +26 °C, indicating the presence of a phase having a superconducting onset around this temperature.     

Approaches to the synthesis of High-TC superconducting oxides in La–Ba–Cu–O and Y–Ba–Cu–O systems

Abstract

High-T_C superconducting oxides of nominal La_1.85Ba_0.15 CuO₄ and YBa₂ Cu₃ O₇ have been prepared by using nitrate, carbonate, oxalate/malonate and citrate precursors. While the samples in the Y-system are generally monophasic YBa₂Cu₃O_7?δ with T_C around 90K, the preparations in the La-system are biphasic containing K₂NiF₄-like La_1.85Ba_0.15 CuO₄ (T_C = 30K) and a perovskite-like phase with' a much higher T_C (200–300K). Effect of Ca, Zr, Ce as well as S substitution in YBa₂Cu₃O_7?δ has also been investigated     

Spinning Particles in NUT–Reissner–Nordstrom Space–Time

We study the geodesic motion of pseudo-classical spinning particles in the NUT–Reissner–Nordstrom space–time. We investigate the generalized Killing equations for spinning space and derive the constants of the motion in terms of the solutions of these equations. We give an analysis of the motion on a cone and on a plane.     

Towards a Skyrme–Hartree–Fock–Bogolyubov Mass Formula

In this work, we explain our astrophysical motivations for deriving a mass formula based on HFB calculations with a Skyrme interaction. We give an overview of existing mass formulae and present briefly the last HF+BCS mass formula [1]. The Skyrme force MSk7 [1] is considered in the study of shell effects at N=82, in the neutron-rich region far from stability, within the HFB and HF+BCS theories, and compared with results obtained using the forces SkP^δ and SkP^δρ [2]. This revised version was published online in July 2006 with corrections to the Cover Date.