Condensation polymerization of pyromellitic dianhydride with aromatic diamine in aprotic solvent: A reaction mechanism

Based on nuclear magnetic resonance (NMR) studies, a probable reaction mechanism was proposed for the condensation polymerization of pyromellitic dianhydride with aromatic diamines in aprotic solvent, N,N-dimethylacetamide (DMAc), to yield aromatic polyimides. The mechanism shows the essential role played by the solvent during polymerization reaction and in imidization. It explains the formation of polyamic acid and that of its high molecular weight buildup under the conditions in which solid dianhydride was added to the solution of diamine in DMAc. A prepolymer complex formation was observed, along with the main polyamic acid, when solid diamine was added to the solution of dianhydride in DMAc. The structure of the prepolymer was derived on the basis of NMR and its formation explained in the mechanism. The nature of the prepolymer was such that on treatment with anhydride it goes to polyamic acid.     

Molecular orbital analysis of the XPS spectra of PMDA-ODA polymide and its polyamic acid precursor

The calculated carbon 1s (C1s) core energy-level positions of PMDA-ODA polymide and of its polyamic acid precursor are compared with the level positions inferred from XPS measurements. For the polyamic acid, calculation and experiment both yield a difference of approximately 1 eV between the carboxylic acid and the amide carbonyl C1s level positions. The difference in shape between the main C1s XPS peaks of the polyamic acid and polyimide is shown to be related to the difference in C1s core energy-level shifts of the carbon atoms composing the benzene ring adjacent to the amide or imide group. The planar imide or PMDA structure apparently yields larger core level shifts for these atoms. We have previously designated these atoms as “imide carbon atoms” (C-Im) to distinguish them from the aromatic carbon atoms (C-C) of the ODA part of the polymeric repeat unit. Comparison of the carbonyl XPS band intensities with the main peak intensities for the polyamic acid, as well as for the polyimide, suggests that there is a carbonyl deficiency at the surface of both of these materials.     

Synthesis and properties of new polyamide-imides

Several new amide—imide polymers of good thermal stability have been synthesized by the reaction in solution of diacid chlorides with diamines containing cyclic imide linkages. Since these polymers incorporate preformed imide groups, they are not subject to some of the problems encountered in the preparation of polyimides by cyclizing polyamic acids. Their solutions in polar solvents such as dimethylacetamide are stable and will tolerate considerable proportions of hydrocarbon thinners without precipitation. Thick films can be cast from the solutions without degradation. A high-temperature cure is not needed to produce tough, flexible films. The powdered polymers can be molded readily.     

A brief report on novel polyazobenzoxazinones

Polybenzoxazinones were synthesized by solution polycondensation from five different aromatic diacidchlorides and 3,3′-diaminoazobenzene-4,4′-dicarboxylic acid through a polyamic acid precursor which was further cyclodehydrated to polybenzoxazinones. The amic acid and the benzoxazinones were obtained in 85–93% and 56–63% yield, respectively. The polymers were characterized by physical and thermal analysis.     

Phenylated imide–quinoxaline copolymers

Phenylated, ordered imide–quinoxaline copolymers of high oxidative-thermal stability were prepared by one-step solution condensation of aromatic tetraamines with N,N′-bis(4-benzilyl)pyromellitimide. Polymerization in m-cresol leads to high molecular weight polymers that remain soluble. Thermal gravimetric analysis and isothermal decomposition at 400°C shows that these polymers are as stable as polyimides or polyquinoxalines. The polymer decomposition temperatures range between 495 and 550°C, depending upon structure. Also, the rate of isothermal decomposition at 400°C in air showed a strong dependency of weight loss on structure. Tough films were cast from solution.     

Cyclopolycondensations. VI. Fully aromatic polybenzoxazinones from aromatic poly(amic acids)

New high temperature aromatic polybenzoxazinones of high molecular weight have been prepared by the cyclopolycondensation of 4,4′-diaminobiphenyl-3,3′-dicarboxylic acid (I) with aromatic dicarboxylic acid halides (II). The low temperature solution polymerization techniques afforded poly(amic acid) (III) of high molecular weight in the first step. An open-chain precursor subsequently underwent thermal cyclodehydration along the polymer chain at 200–350°C. in the second step, to give in quantitative yield a fully aromatic polybenzoxazinone (IV) of outstanding heat stability both in nitrogen and in air. The poly(amic acid) is soluble in N-methyl-2-pyrrolidone, and tough, transparent films can be cast from solution. Insoluble aromatic polybenzoxazinone films which possess excellent oxidative and thermal stability were obtained by the heat treatment of the polyamic acid. A detailed account of polymerization conditions in the low temperature solution polymerization of polybenzoxazinones is given, and the reaction mechanisms of cyclopolycondensation of poly(amic acids) and the formation of polybenzoxazinones are discussed.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Soluble imide–quinoxaline copolymers

Eight new phenylated imide–quinoxaline ordered copolymers were prepared. The synthesis consisted of one-step solution condensations of aromatic bis(o-diamines) with N,N′-bis(benzilyl)benzophenoneimide and N,N′-bis(benzilyl)tetrahydrofuranimide respectively. The polymers were all of high molecular weight and were soluble in a number of different solvents. Thermal gravimetric analysis showed that the aromatic benzophenoneimide-quinoxalines (decomposing between 490 and 530°C) were considerably more stable than the aliphatic tetrahydrofuranimide–quinoxalines (decomposing between 290 and 320°C). All polymers gave tough films which could be cast from solution.     

Miscible polybenzimidazole blends with a benzophenone-based polyimide

Miscible blends of the aromatic polybenzimidazole, poly(2,2(m-phenylene)-5,5′-benzimidazole) (PBI), and the aromatic polyimide formed from 3,3′,4,4′-benzophenone tetracarboxylic dianhydride and 3,3′-diaminobenzophenone (LaRC TPI) have been prepared. Blends with PBI were prepared in N,N-dimethylacetamide solution starting with either the polyamic acid or a 95% imidized form of LaRC TPI; the blend was then precipitated into water or cast as films. The mixture was then imidized thermally to obtain PBI/LaRC TPI blends. Evidence for miscibility was obtained in the form of single composition dependent T_g's intermediate between those of the component polymers and single tan δ dynamic mechanical relaxation peaks. The IR spectra displayed shifts in the N? H stretching band, thereby providing evidence for specific interactions related to the miscibility of these two polymers.     

Preparation and characterization of optically active and organosoluble poly(amide‐imide)s from polycondensation reaction of N,N′‐(4,4′‐sulphonediphthaloyl)‐bis‐L‐isoleucine diacid with aromatic diamines

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride (1) was reacted with L ‐isoleucine (2) in acetic acid and the resulting imide‐acid (3) was obtained in high yield. The diacid chloride (4) was prepared from the diacid derivative (3) by reaction with thionyl chloride. The polycondensation reaction of diacid chloride (4) with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d),m‐phenylenediamine (5e), 2,4‐diaminotoluene (5f) and 4,4′‐diaminobiphenyl (5g) was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.23 to 0.41 dl/g were obtained with high yield. All of the earlier polymers were fully characterized by IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Cyclopolycondensations. VIII. New Thermally Stable Aromatic Polybenzoxazinones by Solution Polymerization in Polyphosphoric Acid

High molecular weight polybenzoxazinones have been prepared by cyclo-polycondensation reaction of 4,4′-diamino-3,3′-biphenyldicarboxylic acid with a variety of aromatic carbonyl compounds using a solution polymerization technique in polyphosphoric acid. From the model reactions of anthranilic acid, and 4,4′-diamino-3,3′-biphenyldicarboxylic acid with benzoyl chloride in polyphosphoric acid, it is established that the cyclopolycondensation proceeds through the formation of an open-chain tractable precursor, polyamic acid of high molecular weight (ninh = 2.66) in the first step, which subsequently undergoes thermal or chemical cyclodehydration along the polymer chain, to yield, in the second step, a fully aromatic polybenz-oxazinone. Polybenzoxazinones thus obtained have excellent thermal stability both in nitrogen and in air.

The optimum polymerization conditions for obtaining polyamic acid of high molecular weight are determined by the study of reaction variables such as polymerization temperatures, monomer concentrations, and reaction time as well as the effect of P₂O₅ concentrations in polyphosphoric acid.     

Thiol–ene polymerizations using imide‐based monomers

New diene and dithiol monomers, based on aromatic imides such as benzophenone‐3,3′,4,4′‐tetracarboxylic diimide were synthesized and used in thiol‐ene polymerizations which yield poly(imide‐co‐thioether)s. These linear polymers exhibit limited solubility in various organic solvents. The molecular weights of the polymers were found to decrease with increasing imide content. The glass transition temperature (T_g) of these polymers is dependent on imide content, with T_g values ranging from ?55 °C (with no imide) up to 13 °C (with 70% imide). These thermal property improvements are due to the H‐bonding and rigidity of the aromatic imide moieties. Thermal degradation, as studied by thermogravimetric analysis, was not significantly different to the nonimide containing thiol‐ene polymers made using trimethyloylpropane diallyl ether and 3,5‐dioxa‐1,8‐dithiooctane. It is expected that such monomers may lead to increased glass transition temperatures in other thiol‐ene polymer systems as these normally exhibit low glass transition temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4637–4642     

Synthesis and characterization of novel,optically active poly(amide‐imide)s from N,N′‐(4,4′‐sulfonediphthaloyl)‐bis‐L‐phenylalanine diacid chloride and aromatic diamines under microwave irradiation

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride was reacted with L ‐phenylalanine in acetic acid, and the resulting imide acid ( 3 ) was obtained in high yield. The diacid chloride ( 4 ) was obtained from its diacid derivative ( 3 ) by reaction with thionyl chloride. The polycondensation reaction of 4 with several aromatic diamines such as 4,4′‐sulfonyldianiline, 4,4′‐diaminodiphenyl methane, 4,4′‐diaminodiphenylether, p‐phenylenediamine, m‐phenylenediamine, 2,4‐diaminotoluene, and 1,5‐diaminonaphthalene was developed with a domestic microwave oven in the presence of trimethylsilyl chloride and a small amount of a polar organic medium such as o‐cresol. The polymerization reactions were also performed with two other methods: low‐temperature solution polycondensation in the presence of trimethylsilyl chloride and reflux conditions. A series of optically active poly(amide‐imide)s with moderate inherent viscosities of 0.21–0.42 dL/g were obtained in high yield. All of the aforementioned polymers were fully characterized by IR, ¹H NMR elemental analyses, and specific rotation techniques. Some structural characterizations and physical properties of these optically active poly(amide‐imide) s are reported. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3974–3988, 2003     

Cyclic Aromatic Polyamides via the Triphenylphosphite Method

Abstract

5‐tert‐Butyl‐isophthalic acid (TIPA) was polycondensed with three different aromatic diamines by means of triphenylphosphite (TPP) and pyridine. The resulting polyamides were characterized by solution viscosities and MALDI‐TOF mass spectra (m.s.). These m.s. revealed significant fractions of cyclic oligo‐ and polyamides in all samples. In polyamides of high molecular weight, only cycles were detectable (observed up to masses of 13,000 Da). Three poly(amide‐imide)s were prepared by TPP‐mediated polycondensation of trimellitic anhydride (TMA) and three aromatic diamines. Although relatively high molar masses were obtained, the MALDI‐TOF m.s. displayed the peaks of linear chains in addition to those of cyclic polymers. The results together suggest that the side reactions mainly occur at the amino endgroups.     

NMR and FTIR investigation of the solution imidization kinetics of model compounds of PMDA/ODA polyamic ethyl ester

Meta- and para-diethyl-p,p-oxydiphenylene pyromellitamide (DOP), the model compounds of the meta and para PMDA/ODA polyamic ethyl ester, were synthesized and characterized by NMR and FTIR spectroscopy. Investigation of the imidization in d₆-DMSO solution using NMR and FTIR techniques has shown that both the half imide and imide were formed. Quantitative analysis of the curing rates and degrees of conversion of the isomers in dilute d₆-DMSO solution as a function of time under isothermal conditions or as function of temperature at fixed time (1 h) indicated that the kinetics of the ring closure reaction of the meta and para isomers were the same within 10%. This suggests that intrinsic reactivity differences between the isomers do not have much effect on the imidization process and do not account for the differences in rate that have been observed for the meta and para polymers in the solid state. No interconversion between the two isomeric forms occurred below 180°C, as has been observed for polyamic acids and their model compounds. The degree of conversion strongly depended on the reaction temperature and increased quickly after 170°C. The rate constant of the second ring closure reaction was found to be approximately three to four times the rate constant of the first ring closure reaction. © 1996 John Wiley & Sons, Inc.     

Formation of a highly ordered poly (N,N'-bis-phenoxyphenylpyromellitimide) powder using a high pressure curing technique

A high-pressure curing technique was developed to help determine the effects of solvent presence during the thermal curing of the polyimide poly (N,N'-bis-phenoxyphenylpyro-mellitimide) (PMDA-ODA). A powder form of this aromatic polyimide was produced from a polyamic acid solution using the high-pressure thermal curing technique. Preliminary characterization of the powder indicates a high degree of crystallinity with a measured density of 1.46 ± 0.01 g/cm³ and a distinct melting point of 594°C. The addition of chemical curing agents to the polyamic acid solution prior to thermal treatment reduced the amount of crystallinity observed in the cured material. Molecular weight measurements of the polyamic acid precursor and powder suggest that the high degree of order observed in the powder is a result of degradation during cure. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America

     

Thermal and optical properties of some phosphorus‐containing poly(1,3,4‐oxadiazole‐ester‐imide)s

A series of phosphorus‐containing poly(1,3,4‐oxadiazole‐ester‐imide)s was prepared by polycondensation reaction of an aromatic dianhydride, namely 1,4‐[2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)]‐naphthalene‐bis(trimellitate)dianhydride, with different aromatic diamines containing 1,3,4‐oxadiazole ring. A solution imidization procedure was used to convert quantitatively the poly(amic acid) intermediates to the corresponding polyimides. The chemical structures of the monomers and polymers were confirmed by Fourier transform infrared, ¹H NMR and ³¹P NMR spectroscopy. The polymers were easily soluble in polar solvents such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide and tetrahydrofuran. They exhibited good thermal properties having the decomposition temperature above 380°C and the glass transition temperature in the range of 201–232°C. Due to the presence of phosphorus the polymers gave high char yield in termogravimetric analysis, hence good flame retardant properties. Optical properties were analyzed in solution by using UV–vis and photoluminescence spectroscopy. Solutions of the polymers in NMP exhibited photoluminescence in the blue region. Copyright © 2010 John Wiley & Sons, Ltd.     

Composites a matrices polyimides thermoplastiques mecanismes de polymerisation et proprietes

Model compounds have been used to determine the mechanisms of reaction of aromatic diamines with aromatic cyclic dianhydrides to form polyamic acids and polyimides by thermal or chemical dehydration. Substituted phthalic anhydride were used to model the anhydride functionality and either 4,4′-diaminodiphenyl (ether, sulfone, methane) or toluidines for the amine functionality. Chemical data obtained ‘in situ’ with Fourier transform infrared spectroscopy (FTIR), 13C nuclear magnetic resonance (liquid and solid states CP MAS) and X-rays diffractometry show that the degree of imidisation is temperature and solvent dependent. This analysis resulted in an analytical method of determining the anhydride - amic acid, and/or amic - imide ratios in the partly cured polyamic acid. Selected properties of films and composites were determined and compared with similar commercial compounds.     

Microwave‐assisted synthesis of optically active poly(amide imide)s derived from diacid chloride containing epiclon and L‐leucine with aromatic diamines

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione or 5‐(2,5‐dioxotetrahydrofurfuryl)‐3‐methyl‐3‐cyclohexyl‐1,2‐dicarboxylic acid anhydride] was reacted with L ‐leucine in acetic acid, and the resulting imide acid ( 3 ) was obtained in a high yield. The diacid chloride ( 4 ) was obtained from its diacid derivative 3 by a reaction with oxalyl chloride in dry carbon tetrachloride. The polycondensation reaction of 4 with several aromatic diamines, such as 4,4′‐sulfonyldianiline, 4,4′‐diaminodiphenylmethane, 4,4′‐diaminodiphenylether, p‐phenylenediamine, m‐phenylenediamine, 2,4‐diaminotoluene, and 1,5‐diaminonaphthalene, was developed with a domestic microwave oven in the presence of a small amount of a polar organic medium such as N‐methylpyrrolidone. The polymerization reactions were also performed with two other methods: low‐temperature solution polycondensation in the presence of trimethylsilyl chloride and reflux conditions. A series of optically active poly(amide imide)s with moderate yields and inherent viscosities of 0.12–0.19 dL/g were obtained. All of these polymers were fully characterized by IR, elemental analysis, and specific rotation techniques. Some structural characterizations and physical properties of these optically active poly(amide imide)s are reported. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1077–1090, 2003     

Novel thermostable polymers from bis-o-aminophenylbenzimidazoles and aromatic tetracarboxylic dianhydrides

Novel aromatic hetero polymers, polybenzoylenebenzimidazoquinazolines, were prepared. These polymers were synthesized by the polymerization of bis-o-aminophenylbenzimidazoles with aromatic tetracarboxylic dianhydrides in organic solvents, followed by cyclocondensation of the polyamic acids in polyphosphoric acid. In the resulting polymers the o-phenylenediamine component behaved trifuntionally and the connecting groups were tricyclic fused rings that contained seven-membered rings. These polymers some of which has a ladder-type structure, exhibited excellent thermal properties.