ESR OF Ti(III) in LiCl-KCl Eutectic

Study of corrosion phenomena associated with the use of molten salts as coolants raised interest in the behaviour of various metal ions in such melts. Gruen & McBeth¹, in the early sixties, studied various transition metal ions in LiCl/KCl eutectic. The purpose of the present letter is an attempt to correlate ESR data with data derived from optical spectroscopy, in particular with respect to the equilibrium between hexa- and tetra-coördinate species of Ti(III) with chlorine ions.     

纳米晶稀土复合氧化物Dy_(0.5)Sr_(0.5)CoO_(3-Y)的光谱特性研究

研究了纳米晶Dy0 5 Sr0 5 CoO3 Y 的光谱特性 ,结果表明 :当晶粒尺寸减小至纳米量级时 ,发射光谱的激子峰波长蓝移 ;XRD ,FTIR谱表明 ,与体材料相比 ,纳米晶的衍射峰宽化 ,纳米晶的红外谱带大劈裂和宽化 ,表现为纳米尺寸量子化效应。     

Simultaneous determination of aluminum (III) and iron (III) by first-derivative spectrophotometry in alloys

A highly sensitive and selective first-derivative spectrophotometric method has been developed for the determination of aluminum and iron in mixtures. The method is based on the formation of the binary complexes of aluminum and iron with Alizarin yellow R (AYR) 5-[4-nitrophenylazo]salicylic acid at pH 2.0 with molar absorptivity of 1.1∙10⁴ l⋅mol^–1⋅cm^–1. A zero-crossing technique is found suitable for the direct measurement of the first derivative value at the specified wavelength, so aluminum and iron were thus determined in the ranges 1.3–5.4 μg/ml and 1.1–8.3 μg/ml, respectively, in the presence of both components. The detection limits were found to be 1.4 ng/ml for aluminum and 2.8 ng/ml for iron. The relative standard deviations were in all cases less than 1.5%. The proposed method was successfully applied for the simultaneous determination of aluminum and iron in certified reference aluminum samples.     

High level compressive residual stresses produced in aluminum alloys by laser shock processing

Laser shock processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results for metal surface treatments in underwater laser irradiation at 1064 nm. A convergent lens is used to deliver 1.2 J/cm² in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG, two laser spot diameters were used: 0.8 and 1.5 mm.Results using pulse densities of 2500 pulses/cm² in 6061-T6 aluminum samples and 5000 pulses/cm² in 2024 aluminum samples are presented. High level of compressive residual stresses are produced −1600 MPa for 6061-T6 Al alloy, and −1400 MPa for 2024 Al alloy. It has been shown that surface residual stress level is higher than that achieved by conventional shot peening and with greater depths. This method can be applied to surface treatment of final metal products.     

Carburization of Cu(110)-Fe alloys by CO excited by electrons

Carbon deposition due to electron excited carbon monoxide is observed on Cu(110)-Fe surfaces. This is studied with a filament specially mounted for this purpose. When copper is covered by more than a few carbon monolayers there is no evidence of a ceasing of the reaction. Iron is lifted from the surface or at least is not completely covered by carbon. The reaction proceeds fastest when a large amount of very small clusters or monomers of iron is present at the surface; the rate is observed to decrease with increasing iron fraction when more iron than a few percent is present at the surface as then only the number and size of the iron facets grow.     

Phase transitions in TiNi(Rh) alloys

In this paper we report the results of x-ray structure analysis of how gamma rays and slight plastic strain affect phase transitions in the alloy Ti₅₀Ni₄₈Rh₂. Analysis of the published data on the temperature dependences of the rhombohedral angle in the R phase during the B2-R phase transition showed that not a single rhombohedral angle curve reflects the distortion relative to the cubic lattice of the B2 phase from the reduced temperature in the alloys TiNi and Ti₅₀Ni_50–xMe_x (Me=Fe, Co, Rh).Tomsk State Architectural-Construction Academy. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 67–75, October, 1995.     

Mictomagnetic behaviour in MnAlC(Ni) alloys

The as cast, thermally treated and hot extruded Mn_1.058Al_0.909C_0.022Ni_0.011 samples were investigated by X-rays, neutron diffraction and magnetic measurements. The hot extruded magnets produced by Matsushita Electric Ind. Co., having (BH)_max = 5 MGOe, show a mictomagnetic-type behaviour.     

Kinetics of nanocrystallization in FeCoNbB(Cu) alloys

HITPERM alloys (FeCoMBCu; M=Nb, Zr, Hf...) have been recently developed and proposed as competitive soft magnetic materials for high-temperature applications. To our knowledge, this work contains the first results on nanocrystallization isothermal kinetics for these alloys. Analysis of nanocrystallization of the studied FeCoNbB(Cu) alloys in the frame of the Johnson–Mehl–Avrami theory shows a slowing-down of the kinetics and anomalously low values of the Avrami exponent, in a similar way to that reported for FeSiBNbCu (FINEMET)-type alloys. Compositional effects of Co substitution and Cu addition are considered. A more realistic kinetic model developed by Hermann et al. accounts for the experimental data. Received: 14 November 2001 / Accepted: 24 June 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +34-95/461-2097, E-mail: conde@us.es     

Internal friction in directed-crystallization (Cu-Sn)-Nb alloys

The distinctive features of the low-frequency internal friction Q ⁻¹(T) of (Cu-Sn)-Nb composites at high temperatures (up to 400°C) are investigated for strains in the range 10⁻⁵–10⁻⁴. Considerable hysteresis of Q ⁻¹(T) in the heating-cooling cycle is recorded, including the presence of a minimum at ∼175°C when the sample is heated to 400°C and two peaks P ₂ (at 280°C) and P ₁ (at ∼100°C) when the sample is cooled from 400°C. The activation energy of the anomalous internal friction background (up to 175°C), the oxygen diffusion parameters, and the oxygen concentration in the niobium fibers (all of which govern the peak P ₂) are calculated, and the value and temperature dependence of the yield point of the bronze matrix (which govern the peak P ₁) are estimated. Zh. Tekh. Fiz. 68, 114–117 (November 1998)     

Spin-diffusion lengths in dilute Cu(Ge) and Ag(Sn) alloys

We used current-perpendicular-to-plane (CPP) exchange-biased spin valves to directly measure spin-diffusion lengths ?_sf^N for N=Cu(2.1 at% Ge) and Ag(3.6 at% Sn) alloys. We found ?_sf^{Cu(2% Ge)}=117₋₆⁺¹⁰ nm and ?_sf^{Ag(4% Sn)}=39±3 nm. The good agreement of this ?_sf^{Cu(2% Ge)} with the value ?_sf^{Cu(2% Ge)}=121±10 nm derived from an independent spin-orbit cross-sectional measurement for Ge in Cu quantitatively validates the use of Valet-Fert theory for CPP-MR data analysis to layer thicknesses several times larger than had been done before. From the value of ?_sf^{Ag(4% Sn)}, we predicted the ESR spin-orbit cross-section for Sn impurities in Ag.     

Formation of niobium oxynitrides by rapid thermal processing (RTP)

The potential of rapid thermal processing (RTP) for the preparation of thin films of niobium oxynitrides was investigated. The 200 and 500 nm niobium films were deposited via sputtering on oxidized silicon(1 0 0)- and on sapphire(1 −1 0 2)-substrates. At first, oxidation of niobium films in molecular oxygen and then nitridation in ammonia using an RTP-system was performed. The films were characterized before and after the oxidation and nitridation processes by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and secondary ion mass spectrometry (SIMS). The influence of the two different substrates, amorphous SiO₂ and single crystalline sapphire on the reactivity of the niobium films was studied in dependence of temperature, time of reaction and film thickness. The existence of niobium oxynitride formation was verified for some of the films. In some of the experiments, crack formation in the films or even delamination of the Nb-films from the substrates was observed.     

Variable temperature FT-IR studies on hydrogen adsorption on the zeolite (Mg,Na)-Y

Variable-temperature infrared spectroscopy was used for the thermodynamic studies on the adsorption of hydrogen on the zeolite (Mg,Na)-Y. Adsorption renders the HH stretching mode infrared active, and simultaneous measurement of IR absorbance and hydrogen equilibrium pressure, over a range of temperature, allowed adsorption enthalpy and entropy to be determined. The standard adsorption enthalpy and entropy resulted to be ΔH° = −18.2(±0.8) kJ mol⁻¹ and ΔS° = −136(±10) J mol⁻¹ K⁻¹, respectively. The adsorption enthalpy is substantially higher than the hydrogen liquefaction heat, which suggests that magnesium-containing porous materials are potential candidates in the search for suitable adsorbents for reversible hydrogen storage.     

Cobalt substituted R---Fe(Co)---C alloys

The formation of tetragonal R₂(FeCo)₁₄C phase has been examined in as-cast and melt-spun R₁₄Fe_78−xCo_xC₈ alloys with cobalt substitutions (R = Y, Dy, Nd). The magnetic properties over a temperature range and the microstructure have been studied as a function of cobalt content. The Curie temperature is increased with Co content but the anisotropy K is decreased. High cobalt content leads to the formation of 1:5 phase. High corecivities have been developed in as-cast and melt-spun Dy₁₄Fe_78−xCo_xC₈ alloys with Co content at zero and 32 at %, respectively. As-cast Nd₁₆Fe_78−xCo_xC₈ alloys did not show any permanent magnetic properties although they had the 2:14:1 phase. However, melt-spun and powdered Nd---Fe---Co---C samples showed a coercivity with the highest value corresponding to a melt-spun Nd₁₄Fe₇₈C₈ sample. Microstructure studies showed that the high H_C in ribbons is due to the fine grain size which is in the range of 500–1000 Å.     

Martensitic transformations in Ti (Ni,Fe) alloys

In this work we used x-ray structural analysis to investigate the martensitic transformations (MTs)B2R andRB19 in Ti(Ni, Fe) alloys containing 1, 2.5, 4, 5 at. % Fe, and the effect of heat treatment on the MT temperatures and sequence. In the majority of cases, it was found that the MTB2R proceeds through a two-phase region (+R). Heat treatment leads to a narrowing of the temperature interval of the existence of the two-phase region, weakly affects the onset temperatures of the MTsB2R T_R andRB19 M_s, and sharply increases the temperature-of the end of the MT M_e. The existence of the two-phase region is related to the two MT channelsB2R andB2B19 initially intrinsic to the allovs of the given compositions.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 19–22, December, 1989.     

Effects of ultrasound and temperature on copper electro reduction in Deep Eutectic Solvents (DES)

This paper concerns a preliminary study for a new copper recovery process from ionic solvent. The aim of this work is to study the reduction of copper in Deep Eutectic Solvent (choline chloride–ethylene glycol) and to compare the influence of temperature and the ultrasound effects on kinetic parameters. Solutions were prepared by dissolution of chloride copper salt CuCl₂ (to obtain Copper in oxidation degree II) or CuCl (to obtain Copper in oxidation degree I) and by leaching metallic copper directly in DES. The spectrophotometry UV–visible analysis of the leached solution showed that the copper soluble form obtained is at oxidation degree I (Copper I). Both cyclic voltammetry and linear voltammetry were performed in the three solutions at three temperatures (25, 50 and 80 °C) and under ultrasonic conditions (F = 20 kHz, PT = 5.8 W) to calculate the mass transfer diffusion coefficient kD and the standard rate coefficient k°. These parameters are used to determine that copper reduction is carried out via a mixed kinetic-diffusion control process. Temperature and ultrasound have the same effect on mass transfer for reduction of Cu^II/Cu^I. On the other hand, temperature is more beneficial than ultrasound for mass transfer of Cu^I/Cu. Standard rate constant improvement due to temperature increase is of the same order as that obtained with ultrasound. But, by combining higher temperature and ultrasound (F = 20 kHz, PT = 5.6 W at 50 °C), reduction limiting current is increased by a factor of 10 compared to initial conditions (T = 25 °C, silent), because ultrasonic stirring is more efficient in lower viscosity fluid. These values can be considered as key-parameters in the design of copper recovery in global processes using ultrasound.     

A positron lifetime study in quenched Pb(Ag) alloys

Positron lifetime measurements have been made in quenched or irradiated pure Pb and in quenched Pb(Ag) alloys. From positron investigation of annealing behaviour, the precipitation of silver atoms in dilute alloys should be understood in terms of (Ag-Pb) interstitially migrating pairs. The presence of di-interstitials (Ag-Ag) or complexes [Ag(S)-V] as mobile defects responsible for the Ag transport process in concentrated alloys is discussed.     

An experimental and modeling investigation of aluminum-based alloys and nanocomposites processed by ultrasonic cavitation processing

Some recent studies are showing that the microstructure and mechanical properties of manufactured components can be significantly improved when ceramic nanoparticles are used as reinforcement to form a metal-matrix-nano-composite (MMNC). During the fabrication of MMNCs, ultrasonic cavitation processing plays an important role in refining microstructure, dispersing nanoparticles and breaking up clusters of nanoparticles.