DFT study on electronic structures and optical absorption properties of C, S cation- doped SrTiO3

The effects of C cation and S cation doping on the electronic structures and optical properties of SrTiO₃ are investigated by density function theory (DFT) calculations. The calculated results reveal that the top of the valence band is predominately made up of the O 2p states for the pure SrTiO₃. When SrTiO₃ was doped with C cation and S cation, the top of the valence bands consists mainly of O 2p+C 2s hybrid orbitals and O 2p+S 3s hybrid orbitals, respectively. The band gap of SrTiO₃ is narrowed by the doping with C cation and S cation, especially for the C and S-codoped SrTiO₃. Moreover, the red shifts of the absorption edge are found by the calculated optical properties, which is consistent with reported experiment results. It is the explanation for their visible light respondency by the presence of C 2s and S 3s states on the upper edge of the valence band. All of these results can explain the good photocatalytic properties of C, S cation-codoped SrTiO₃ under visible light irradiation.      

Mechanical,electronic and optical properties of SeZnO3: a GGA+U study

ABSTRACT

Based on first principles computations, the structural, mechanical, electronic band structure, and optical properties of SeZnO₃ compound have been predicted. The dependence of selected observables of SeZnO₃ compound on the effective U (the Hubbard on-site Coulomb repulsion) parameter has been investigated in detail. The elastic constant, Young’s modulus, bulk modulus, shear modulus, Poisson ratio, anisotropic factor, acoustic velocity, and Debye temperature have been computed. The calculated electronic band structure and density of states indicate that SeZnO₃ is a semiconductor material and has indirect band gap. The computations of the optical spectra, as a function of the incident photon radiation in 0–35?eV energy range has also been performed and the interband transitions are examined. The results indicate that Hubbard parameter plays a crucial role in explaining mechanical, electronic, and optical properties of SeZnO₃.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

YFeO3的电子结构和光学性质的第一性原理研究

稀土正铁氧体YFeO₃呈正交钙钛矿结构,其晶体和纳米晶材料在电极材料、 传感器和光催化领域具有重要的应用价值.用平面波赝势方法,采用广义梯度近似、改进的Perdew-Burke-Emzerhof交换-关联势、 实空间超软赝势计算方案,研究了YFeO₃晶体的几何结构、电子结构和光学性质. 计算得到的晶格参量与报道的实验结果一致.通过对能带结构、态密度、介电函数、吸收系数和光电导率的计算和分析, 确定YFeO₃是直接能隙半导体,能隙E_g约为2.22 eV,阐明了YFeO₃晶体和纳米晶具有较好的可见光催化性能.     

A comparative study of electronic structure and magnetic properties of SrCrO3 and SrMoO3

A comparative study of electronic structure and magnetic properties of SrCrO₃ and SrMoO₃ has been carried out using FPLAPW method with density-functional theory. The calculated results suggest that both compounds are nonmagnetic (NM) metal in cubic structures at room temperature, and they exhibit very similar band structure and electronic properties except more extend Mo 4d orbitals than Cr 3d electronic states. However, the electronic structure and magnetic properties exhibit remarkable differences between them in the low temperature phases. SrCrO₃ is with a C-AFM ground state with magnetic moment of 1.18μ_B/Cr in the tetragonal structure, while SrMoO₃ is with a NM ground state in the orthorhombic structure. It is assumed that the extend 4d orbitals may be the reason which results in NM solution at low temperature phase of SrMoO₃.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

Strain-tunable electronic,elastic, and optical properties of CaI2 monolayer: first-principles study

ABSTRACT

The effects of biaxial strain on the electronic structure and the elastic and optical properties of monolayer CaI₂ were studied using first-principles calculations. The two-dimensional (2D) equation of state for monolayer CaI₂ as fit in a relative area of 80–120% is more accurate. The band gap can be tuned under strain and reached a maximum at a tensile strain of 4%. Under compressive strains, the absorption spectrum showed a significant red shift at higher strains. The static reflectance and static refractive index decreased in the strain range of ?10% to 10%.     

Structural, elastic, and electronic properties of orthorhombic NH3BH3: An ab initio study

At the generalized gradient approximation (GGA), the elastic constants of the orthorhombic phase of NH₃BH₃ were calculated with plane-wave pseudo-potential method. Our calculation showed that the orthorhombic phase NH₃BH₃ is a loose and brittle material, as well as hard to be deformed, also we calculated the elastic anisotropies and the Debye temperatures from the elastic constants. And from the band structure and density of state (DOS), we concluded that NH₃BH₃ is a wide-gap semiconductor and the band gap is almost 6.0 eV. The bonds between N atoms and H atoms show a strong covalent characteristic, B atoms and H atoms form ironic bonds, and so as to the B-N bonds. Electrons from the B atoms are absorbed by the H atoms around the B atoms, and the H atoms display electronegativity.     

几种三元过渡金属碳化物弹性及电子结构的第一性原理研究

基于密度泛函理论平面波方法研究了六方WC型Re_xW_1－xC(x=1, 0.25, 0.75, 0),Re_0.5Os_0.5C和Os_0.5W_0.5C的晶体结构、弹性和电子结构性质.研究发现Re_0.25W_0.75C晶体具有优异的弹性性能及稳定性,其剪切模量(312 GPa)超过了所有其他实验合成和     

First-principles studies of the electronic structure and optical properties of AgBO<Subscript>3</Subscript> (B=Nb,Ta) in the paraelectric phase

The electronic energy-band structure, density of states (DOS), and optical properties of AgBO₃ in the paraelectric cubic phase have been studied by using density functional theory within the local density approximation for exchange-correlation for the first time. The band structure shows a band gap of 1.533 eV (AgNbO₃)and 1.537 eV (AgTaO₃)at (M-⌈)point in the Brillouin zone. The optical spectra of AgBO₃ in the photon energy range up to 30 eV are investigated under the scissor approximation. The real and imaginary parts of the dielectric function and — thus the optical constants such as reflectivity, absorption coefficient, electron energy-loss function, refractive index, and extinction coefficient — are calculated. We have also made some comparisons with related experimental and theoretical data that is available.      

Frequency Doubling of a Laser Diode Using a Domain-Inverted LiTaO3Waveguide with a Monolithic Bragg Reflector

We report wavelength stabilization of a laser diode using a highly efficient distributed Bragg reflector (DBR) grating formed on a LiTaO₃ quasi-phase-matched second harmonic generation (QPM-SHG) device. Fabricating the second-order DBR on the LiTaO₃ waveguide, the reflectivity of 90% and FWHM wavelength bandwidth of 0.2 nm were obtained. By stabilizing the oscillation wavelength of the laser diode, 3.1 mW of blue light was generated in the QPM-SHG device with the monolithic grating.     

Structural,elastic, electronic and optical properties of platinum-based superconductor SrPt3P under pressure: a first-principles study

The structural, elastic, electronic and optical properties of the platinum-based superconductor SrPt₃P under pressure are investigated by the generalized gradient approximation with the Perdew–Burke–Ernzerhof exchange-correlation functional in the framework of density-functional theory. The calculated structural parameters (a, c) and the primitive cell volume V of SrPt₃P at the ground state are in good agreement with the available experimental data and seem to be better than other calculated results. The pressure dependences of the elastic constants \mathop C\nolimits_{ij}, bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio σ of SrPt₃P are also obtained successfully. The computed elastic constants indicate that SrPt₃P is mechanically stable up to 100 GPa. The obtained B/G is 2.56 at the ground state, indicating that SrPt₃P behaves in a ductile manner. The ratio B/G also increases with growing pressures, indicating that the structure becomes more and more ductile. Even though SrPt₃P is an ionic-covalent crystal, the obtained density of states shows that it has metallic characteristic. These conclusions can be further demonstrated by analysing the charge and Mulliken population. In addition, we have investigated the dielectric function and the loss function. It is found that the dielectric function in (E||x, E||y) is isotropic, whereas the directions (E||x, E||z) are anisotropic; the effect of pressure on the loss function of the deep ultraviolet region gradually increases as the pressure increases.     

Elastic,electronic and thermal properties of topological insulator SmB6: first-principles calculations

Abstract

The pressure dependence of the structural, elastic, electronic and thermal properties of Kondo insulator SmB₆ have been systematically studied by density functional theory combined with the quasi-harmonic Debye model. The calculated structure at zero pressure is in good agreement with the available experimental results at low temperature. The obtained elastic constants, bulk modulus and shear modulus indicate that SmB₆ is mechanically stable and behaves in a brittle manner under the applied pressure 0–20 GPa, consistent with available experimental data. In addition, the elastic-relevant properties, Young’s modulus and the Poisson ratio manifest that increasing pressure results in an enhancement in the stiffness of the compound. It is found that unlike temperature, pressure has little effect on the heat capacity of SmB_6. What more important is that we observed an insulator to metal phase transition at about 5.5 GPa through the disappearance of the band gap, well consistent with the experimental data. This transition has little effect on the physical properties of SmB₆.     

Effect of stoichiometry on the atomic and electronic structure of BaTiO3 nanoparticles: a first-principles study

We have used density functional theory calculations to investigate the atomic and electronic structure of barium titanate (BaTiO₃) nanoparticles. We studied the local atomic structure of different-sized stoichiometric and nonstoichiometric nanoparticle models in detail. Our results showed that all the stoichiometric BaTiO₃ clusters exhibit dielectric properties and form rhombohedral and monoclinic structures. However, oxygen deficient nonstoichiometric clusters show metallic behaviour and form cubic and tetragonal structures.     

First-principles prediction of crystal structure and physical properties of ScB3

The crystal structure of ScB₃ is seeked by combining the developed particle swarm optimisation algorithm for crystal structure prediction with first-principles calculations. A new monoclinic phase with the C2/m symmetry is predicted successfully, which is energetically more superior to the early reported R-3m-, P2₁/m-, P6₃/mmc-, P-6m2-, Pnma-, and Pm-3m-type structures in the pressure range from 0 to 100?GPa. The obtained elastic constants and phonon dispersion curve reveal that the C2/m-ScB₃ is mechanically and dynamically stable. The predicted large bulk module, high shear modulus, small Poisson’s ratio as well as the considerable hardness indicate that the C2/m-ScB₃ has outstanding mechanical property. Meanwhile, the dependences of the bulk modulus and Young’s modulus of ScB₃ on the crystal orientation are investigated theoretically. Through applying the strain–stress method, the ideal tensile and shear strengths along different crystal directions are also estimated, and the obtained results confirm that the shear mode dominates the failure mode in the C2/m-ScB₃ structure and it is intrinsically a hard material. The electronic structure calculation and chemical bonding analysis illustrate that the strong covalent B-B and Sc-B bonds are responsible for its structural stability and high hardness.     

LixFePO4(x=0.0, 0.75, 1.0)电子结构与弹性性质的第一性原理研究

采用基于密度泛函理论的第一性原理研究方法,计算了不同嵌锂态Li_xFePO₄(x=0,0.75,1.0)的电子结构. 对于橄榄石型Li_xFePO₄正极材料,虽然Fe3d电子在费米能级附近相互交错,但由于受晶体场作用的限制,并不能真正成为自由电子,Fe3d电子对体系的导电性没有很大贡献,而Fe—O键在低能成键区形成p-d杂化的局域态共价键对稳定合金骨架具有重要作用. 随着锂离子的脱 关键词： 锂离子电池 4')" href="#">LiFePO₄ 电子结构 弹性性质     

UO2的电子结构及光学性质的第一性原理研究

采用局域自旋密度近似 (LSDA)和有效库仑相关能 (U) 方法研究了UO₂的晶格参数、能带结构和光学常数. 计算得到的UO₂晶体的晶格常数为5.40 ?,带隙宽度为1.82 eV,正确预测了UO₂的反铁磁性半导体基态性质. 能带结构和介电函数的分析结果表明,铀的6d电子在晶体场中发生劈裂形成两个能级,与实验结果较为符合.     

Three-port electrical and optical model for LiTaO3 electro-optic probe with CPW test structure

A three-port electrical and optical model of LiTaO₃ probes with a high-bandwidth coplanar waveguide (CPW) test structure is developed in this paper. The three-port model is constructed by combining the full wave field simulation and the neural network techniques. The three-port model has the same accuracy as the full wave modeling, but its characteristics are directly obtained from the neural network weighting parameters rather than the complicated full wave simulation. With this model, both invasiveness and waveform distortion in the external E-O sampling can be de-embedded.     

Nanoscale ab-initio calculations of optical and electronic properties of LaCrO3 in cubic and rhombohedral phases

We report nanoscale ab-initio calculations of the linear optical and electronic properties of LaCrO₃ in nonmagnetic cubic and rhombohedral phases using the full potential linear augmented plane wave (FP-LAPW) method. In this work the generalized gradient approximation is used for exchange-correlation potential. The dielectric tensor is derived within random-phase approximation. We present results for the band structure, density of states, imaginary and real parts of dielectric tensor, electron energy loss spectroscopy, sum rules, reflectivity, refractive index and extinction coefficient. The regions of transparent, absorption and reflection are discussed. We are not aware of any published experimental or theoretical data for these phases, so our calculations can be used to cover this lack of data for these phases.