A highly sensitive detection platform based on surface-enhanced Raman scattering for Escherichia coli enumeration

A very sensitive and highly specific heterogeneous immunoassay system, based on surface-enhanced Raman scattering (SERS) and gold nanoparticles, was developed for the detection of bacteria and other pathogens. Two different types of gold nanoparticles (citrate-stabilized gold nanosphere and hexadecyltrimethylammonium bromide (CTAB)-stabilized gold nanorod particles) were examined and this immunoassay was applied for the detection of Escherichia coli. Raman labels were constructed by using these spherical and rod-shaped gold nanoparticles which were first coated with 5,5′-dithiobis(2-nitrobenzoic acid) (DTNB) and subsequently with a molecular recognizer. The working curve was obtained by plotting the intensity of the SERS signal of the symmetric NO₂ stretching of DTNB at 1,333 cm⁻¹ versus the concentration of the E. coli. The analytical performance of gold particles was evaluated via a sandwich immunoassay, and linear calibration graphs were obtained in the E. coli concentration range of 10¹–10⁵ cfu/mL with a 60-s accumulation time. The sensitivity of the Raman label fabricated with gold nanorods was more than three times higher than spherical gold nanoparticles. The selectivity of the developed sensor was examined with Enterobacter aerogenes and Enterobacter dissolvens, which did not produce any significant response. The usefulness of the developed immunoassay to detect E. coli in real water samples was also demonstrated.     

A high sensitive assay platform based on surface-enhanced Raman scattering for quantification of protease activity

In this study, a new, sensitive, and rapid assay was developed to quantitatively measure the proteolytic enzyme activity using the surface-enhanced Raman scattering (SERS) probe. Two different shapes of gold nanoparticles, gold nanosphere and nanorod particles were produced. SERS label, comprising self-assembled monolayers (SAMs) of Raman reporter molecule (5,5-Dithiobis (2-Nitrobenzoic acid), DTNB), was coated on the surface of the nanoparticles. Two different SERS-based analysis platforms were designed using gold-coated glass slide and polystyrene microtiter plate. The calibration curves were obtained by plotting the intensity of the SERS signal of symmetric NO₂ stretching of DTNB at 1326 cm⁻¹vs. the protease concentration. The effects of nanoparticle geometry and assay platform on the protease assay were investigated and the best working combination of the parameters was selected as rod shaped SERS probe and gold-coated glass slide. The correlation between the protease activity and SERS signal was found to be linear within the range of 0.1-2 mU/mL (R² = 0.979). The limit of detection (LOD) and limit of quantification (LOQ) values of the validated method were found as 0.43 and 1.30 mU/mL, respectively. The intra-day and inter-day precisions of the method, as relative standard deviation (RSD), were determined as 2.5% and 3.6%, respectively. The developed method was successfully applied for quantitative analysis of the commercial enzyme preparate that is used in cheese making process. It was also used for investigation of substrate specificity of protease enzyme towards the casein and bovine serum albumin. The proposed method has a flexibility to try different substrates for the detection of various enzyme activities.     

A highly sensitive label-free resonance light scattering assay of carcinoembryonic antigen based on immune complexes

As a kind of glycoprotein, carcinoembryonic antigen (CEA) is the important tumor marker for clinical diagnosis of the presence or recurrence of cancer. In this work, a novel label-free resonance light scattering (RLS) spectral CEA assay was developed based on the combination of highly selective immunoreaction and ultrasensitive RLS technique. In Tris–HCl buffer solution (pH 7.5), the specific immunoreaction between CEA antigen and mouse anti-CEA formed immune complexes which had a maximum RLS spectral peak at 389.0 nm, with the existence of physiological saline and polyethylene glycol 20,000 (PEG 20,000). Under the optimal conditions, the magnitude of enhanced RLS intensity (ΔI_RLS) was proportional to the concentration of CEA in the range from 0.1 to 60 ng mL⁻¹, with a detection limit (LOD, 3σ) of 0.03 ng mL⁻¹. The characteristics of RLS, the CEA immunocomplex, the immune response, the ratio of CEA antigen and mouse anti-CEA, and the optimum conditions of the immunoreaction have been investigated. The CEA concentrations of 20 serum specimens detected by the developed assay showed consistent results in comparison with those obtained by commercially available enzyme-linked immunosorbent assay (ELISA) kit. And this method has many satisfying merits including label-free, sensitivity and high selectivity.     

Inhibition assay of yeast cell walls by plasmon resonance Rayleigh scattering and surface-enhanced Raman scattering imaging

We report on plasmon resonance Rayleigh scattering (PRRS) and surface enhanced Raman scattering (SERS) imaging for inhibition assay of yeast cell walls. This assay reveals that the proteins having alkali sensitive linkage bound to β1,3 glucan frameworks in cell walls are involved in SERS activity. The result is further confirmed by comparison of genetically modified cells and wild type cells. Finally, we find that PRRS and SERS spots do not appear on cell walls when daughter cells are enough smaller than parent ones, but appear when size of daughter cells are comparable to parent cells. This finding indicates the relationship between expression of the proteins that generate SERS spots and cell division. These results demonstrate that PRRS and SERS imaging can be a convenient and sensitive method for analysis of cell walls.     

Extremely sensitive sandwich assay of kanamycin using surface-enhanced Raman scattering of 2-mercaptobenzothiazole labeled gold@silver nanoparticles

Herein, we report the development of extremely sensitive sandwich assay of kanamycin using a combination of anti-kanamycin functionalized hybrid magnetic (Fe₃O₄) nanoparticles (MNPs) and 2-mercaptobenzothiazole labeled Au-core@Ag-shell nanoparticles as the recognition and surface-enhanced Raman scattering (SERS) substrate, respectively. The hybrid MNPs were first prepared via surface-mediated RAFT polymerization of N-acryloyl-l-glutamic acid in the presence of 2-(butylsulfanylcarbonylthiolsulfanyl) propionic acid-modified MNPs as a RAFT agent and then biofunctionalized with anti-kanamycin, which are both specific for kanamycin and can be collected via a simple magnet. After separating kanamycin from the sample matrix, they were sandwiched with the SERS substrate. According to our experimental results, the limit of detection (LOD) was determined to be 2 pg mL⁻¹, this value being about 3–7 times more than sensitive than the LOD of previously reported results, which can be explained by the higher SERS activity of silver coated gold nanoparticles. The analysis time took less than 10 min, including washing and optical detection steps. Furthermore, the sandwich assay was evaluated for investigating the kanamycin specificity on neomycin, gentamycin and streptomycin and detecting kanamycin in artificially contaminated milk.     

Toward a glucose biosensor based on surface-enhanced Raman scattering

This work presents the first step toward a glucose biosensor using surface-enhanced Raman spectroscopy (SERS). Historically, glucose has been extremely difficult to detect by SERS because it has a small normal Raman cross section and adsorbs weakly or not at all to bare silver surfaces. In this paper, we report the first systematic study of the direct detection of glucose using SERS. Glucose is partitioned into an alkanethiol monolayer adsorbed on a silver film over nanosphere (AgFON) surface and thereby, it is preconcentrated within the 0-4 nm thick zone of electromagnetic field enhancement. The experiments presented herein utilize leave-one-out partial least-squares (LOO-PLS) analysis to demonstrate quantitative glucose detection both over a large (0-250 mM) and clinically relevant (0-25 mM) concentration range. The root-mean-squared error of prediction (RMSEP) of 1.8 mM (33.1 mg/dL) in the clinical study is near that desired for medical applications (1 mM, 18 mg/dL). Future studies will advance toward true in vivo, real time, minimally invasive sensing.     

Deep-UV surface-enhanced resonance Raman scattering of adenine on aluminum nanoparticle arrays

We report the ultrasensitive detection of adenine using deep-UV surface-enhanced resonance Raman scattering on aluminum nanostructures. Well-defined Al nanoparticle arrays fabricated over large areas using extreme-UV interference lithography exhibited sharp and tunable plasmon resonances in the UV and deep-UV wavelength ranges. Theoretical modeling based on the finite-difference time-domain method was used to understand the near-field and far-field optical properties of the nanoparticle arrays. Raman measurements were performed on adenine molecules coated uniformly on the Al nanoparticle arrays at a laser excitation wavelength of 257.2 nm. With this technique, less than 10 amol of label-free adenine molecules could be detected reproducibly in real time. Zeptomole (~30,000 molecules) detection sensitivity was readily achieved proving that deep-UV surface-enhanced resonance Raman scattering is an extremely sensitive tool for the detection of biomolecules.     

Quantitative analysis of methyl green using surface-enhanced resonance Raman scattering

Surface-enhanced resonance Raman scattering (SERRS) spectra of aqueous solutions of the triphenylmethane dye methyl green have been obtained for the first time by use of citrate-reduced silver colloids and a laser excitation wavelength of 632.8 nm. Given the highly fluorescent nature of the analyte, which precluded collection of normal Raman spectra of the dye in solution and powdered state, it was highly encouraging that SERRS spectra showed no fluorescence due to quenching by the silver sol. The pH conditions for SERRS were optimised over the pH range 0.5–10 and the biggest enhancement for SERRS of this charged dye was found to be at pH 2.02, thus this condition was used for quantitative analysis. SERRS was found to be highly sensitive and enabled quantitative determination of methyl green over the range 10⁻⁹ to 10⁻⁷ mol dm⁻³. Good fits to correlation coefficients were obtained over this range using the areas under the vibrational bands at 1615 and 737 cm⁻¹. Finally, a limit of detection of 83 ppb was calculated, demonstrating the sensitivity of the technique.     

A highly sensitive resonance scattering spectral assay for IgG using Fehling reagent-glucose-immunonanogold reaction

Nanogold exhibits strong catalytic effect on the slow reaction between glucose and Fehling reagent at 70 °C. The production of Cu₂O particles have two stronger resonance scattering (RS) peaks at 390 nm and 505 nm. The catalytic effect of nanogold-labeled goat anti-human IgG (AuIgG) on the reaction was investigated with the RS technique. Coupled the immunoreaction and the immunonanogold catalytic reaction and centrifugal technique, a highly sensitive and selective RS method was developed for the detection of immunoglobulin G (IgG) as a model. With the concentration of IgG increased, the RS intensity at 505 nm decreased. The decreased intensity at 505 nm ΔI_505 nm was proportional to IgG concentration in the range of 0.13-53.3 ng mL⁻¹, with a detection limit of 0.04 ng mL⁻¹ IgG. This new immunonanogold-catalytic Cu₂O-particle RS bioassay was applied to the determination of IgG in serum sample, with high sensitivity, good selectivity, and low cost.     

A highly sensitive and selective immunonanogold resonance scattering spectral assay for sudan I

A sensitive and selective resonance scattering spectral (RSS) assay was proposed for the determination of sudan I (SDI), using 10 nm nanogold to label the antibody against sudan I (anti-SDI Ab) to obtain a RSS probe for SDI. The immunonanogold reaction between nanogold-labelled anti-SDI Ab and SDI took place in pH 4.92 KH₂PO₄–Na₂HPO₄ buffer solution and in the presence of polyethylene glycol (PEG)-6000, and the intensity of resonance scattering peak at 580 nm decreased greatly. The decreased intensity ΔI_{580 nm} was proportional to the concentration of SDI in the range of 0.23–45.0 ng mL^?1. The linear regression equation was calculated as ΔI_580nm = 1.20c + 2.01 (R = 0.9975, n = 6), with a detection limit (3σ) of 0.13 ng mL^?1. The SDI in egg samples was assayed, with satisfactory results.     

Silver-particle-based surface-enhanced resonance Raman scattering spectroscopy for biomolecular sensing and recognition

We demonstrate in this work that 2-μm-sized Ag (μAg) powders can be used as a core material for constructing biomolecular sensing/recognition units operating via surface-enhanced resonance Raman scattering (SERRS). This is possible because μAg powders are very efficient substrates for both the diffuse reflectance IR and the surface-enhanced Raman scattering–SERRS spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces. Besides, the agglomeration of μAg particles in a buffer solution can be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In this particular study, we used rhodamine B isothiocyanate (RhBITC) as a SERRS marker molecule, and μAg powders adsorbed consecutively with RhBITC and PAH–PAA bilayers were finally derivatized with biotinylated poly(l-lysine). On the basis of the nature of the SERRS peaks of RhBITC, those μAg powders were confirmed to selectively recognize streptavidin molecules down to concentrations of 10⁻¹⁰ g mL⁻¹. Since a number of different molecules can be used as SERS–SERRS marker molecules, the present method proves to be an invaluable tool for multiplex biomolecular sensing/recognition via SERS and SERRS.     

A highly sensitive assay for protein with dibromochloro-arsenazo-Al(3+) using resonance light scattering technique and its application

A simple, sensitive and selective method has been developed for the determination of protein using resonance light scattering (RLS) technique. The method is based on the interaction of protein and arsenazo-DBC-Al(3+) in the pH range of 5.0-7.0, which causes a substantial enhancement of the resonance scattering signal of arsenazo-DBC-Al(3+) in the wavelength range of 300-550 nm with the maximum RLS platform at 405-420 nm. With this method, 2.50-50.00 mug ml(-1) of bovine serum albumin (BSA) and 2.50-60.00 mug ml(-1) of human serum albumin (HSA) can be determined, and the detection limits, calculated three times the standard deviation (S.D.) of six blank measurements, for BSA and HSA were 123.4 and 89.6 ng ml(-1), respectively. Moreover, the method is free from interference from many amino acids and metal ions. The method, with high sensitivity, selectivity and reproducibility, was satisfactorily applied to the determination of total protein in human serum samples. Mechanism studies indicated that arsenazo-DBC-Al(3+) could bind to BSA depending mainly on electrostatic forces, which results in enhanced RLS in the arsenazo-DBC-Al(3+)-protein system.     

Determination of the sodium 2-mercaptoethanesulfonate based on surface-enhanced Raman scattering

Based on the surface-enhanced Raman scattering (SERS) sodium 2-mercaptoethanesulfonate (mesna) was determined using unmodified gold colloid as the probe. The Raman scattering intensity was obviously enhanced in the presence of sodium chloride. The influence of experimental parameters, such as incubation time, sodium chloride concentration and pH value on SERS performance was examined. Under the optimum conditions, the SERS intensity is proportional to the concentration of mesna in the range of 9.0×10(-8) to 9.0×10(-7) mol/L and detection limit (S/N=3) is 1.16×10(-8) mol/L. The corresponding correlation coefficient of the linear equation is 0.996, which indicates that there is a good linear relationship between SERS intensity and mesna concentration. The experimental results indicate that the proposed method is a viable method for determination of mesna. The real samples were analyzed and the results obtained were satisfactory.     

等离激元激励表面增强拉曼光谱检测技术与仪器

本文总结了近年来基于传播型表面等离激元（Propagafingsurfaceplasmons,PSPs）参与的表面增强拉曼（Surface—enhancedRamanscattering,SERS）技术和仪器方面的研究进展．内容主要包括3部分：（1）基于PSPs激励拉曼散射的装置和技术,包括在消逝场下激发PSPs共振增强拉曼的原理与装置、与表面等离子体共振（Surfaceplasmonresonance,SPR）传感技术的联用及新型结构的长程等离激元激励拉曼技术的研究进展;（2）通过引入局域型表面等离激元（Localizedsurfaceplasmons,LSPs）进一步增强SERS,进而实现PSPs-LSPs共同增强拉曼的超灵敏检测技术,包括在消逝场激发的PSPs基础上,增加纳米粒子实现的PSPs与LSPs共同增强拉曼的原理、装置,以及用该方法进行生物体系的免疫识别检测,此外,还在微纳周期结构上实现了PSPs与LSPs共同激励拉曼;（3）基于PSPs耦合的定向SERS技术,包括在消逝场结构和周期结构上实现SERS定向耦合发射以达到高激发和高收集效率的新技术．     

Chemical interactions in the surface-enhanced resonance Raman scattering of ruthenium polypyridyl complexes

Surface-enhanced resonance Raman scattering (SERRS) from the alpha-diimine complexes [Ru(bpm)(3)](2+) and [Ru(bpz)(3)](2+) is reported for the first time at a roughened silver electrode. In both cases, a possible adsorbate orientation has been proposed involving binding through nitrogen lone pair electrons to the silver surface, based on changes in band positions upon adsorption. The SERRS spectra of [Ru(bpm)(3)](2+) were found to change slightly with a change in applied potential. The relative intensity of the nu(C6C6') band was found to be dependent on both excitation wavelength and applied potential. This was ascribed to an active charge transfer (CT) mechanism operating synergistically with the electromagnetic mechanism. No such CT activity was observed in [Ru(bpz)(3)](2+). It is tentatively suggested that this behavior may arise from the different modes of adsorption of the two complexes.     

Highly sensitive trace analysis of paraquat using a surface-enhanced Raman scattering microdroplet sensor

We report a rapid and highly sensitive trace analysis of paraquat (PQ) in water using a surface-enhanced Raman scattering (SERS)-based microdroplet sensor. Aqueous samples of PQ, silver nanoparticles, and NaCl as the aggregation agent were introduced into a microfluidic channel and were encapsulated by a continuous oil phase to form a microdroplet. PQ molecules were adsorbed onto particle surfaces in isolated droplets by passing through the winding part of the channel. Memory effects, caused by the precipitation of nanoparticle aggregates on channel walls, were removed because the aqueous droplets were completely isolated by a continuous oil phase. The limit of detection (LOD) of PQ in water, determined by the SERS-based microdroplet sensor, was estimated to be below 2×10(-9) M, and this low detection limit was enhanced by one to two orders of magnitude compared to conventional analytical methods.     

The theory of surface-enhanced Raman scattering

By considering the molecule and metal to form a conjoined system, we derive an expression for the observed Raman spectrum in surface-enhanced Raman scattering. The metal levels are considered to consist of a continuum with levels filled up to the Fermi level, and empty above, while the molecule has discrete levels filled up to the highest occupied orbital, and empty above that. It is presumed that the Fermi level of the metal lies between the highest filled and the lowest unfilled level of the molecule. The molecule levels are then coupled to the metal continuum both in the filled and unfilled levels, and using the solutions to this problem provided by Fano, we derive an expression for the transition amplitude between the ground stationary state and some excited stationary state of the molecule-metal system. It is shown that three resonances contribute to the overall enhancement; namely, the surface plasmon resonance, the molecular resonances, as well as charge-transfer resonances between the molecule and metal. Furthermore, these resonances are linked by terms in the numerator, which result in SERS selection rules. These linked resonances cannot be separated, accounting for many of the observed SERS phenomena. The molecule-metal coupling is interpreted in terms of a deformation potential which is compared to the Herzberg-Teller vibronic coupling constant. We show that one term in the sum involves coupling between the surface plasmon transition dipole and the molecular transition dipole. They are coupled through the deformation potential connecting to charge-transfer states. Another term is shown to involve coupling between the charge-transfer transition and the molecular transition dipoles. These are coupled by the deformation potential connecting to plasmon resonance states. By applying the selection rules to the cases of dimer and trimer nanoparticles we show that the SERS spectrum can vary considerably with excitation wavelength, depending on which plasmon and/or charge-transfer resonance is excited.     

Concentration-dependent surface-enhanced resonance Raman scattering of a porphyrin derivative adsorbed on colloidal silver particles

Surface-enhanced Raman spectra (SERS) of 5,10,15,20-tetrakis(1-decylpyridium-4-yl)-21H,23H-porphintetrabromide or Por 10 (H(2)Tdpyp) adsorbed on silver hydrosols are compared with the FTIR and resonance Raman spectrum (RRS) in the bulk and in solution. Comparative analysis of the RR and the FTIR spectra indicate that the molecule, in its free state, has D(2h) symmetry rather than C(2v). The SERS spectra, obtained on adsorption of this molecule on borohydride-reduced silver sol, indicate the formation of silver porphyrin. With the change in the adsorbate concentration, the SERS shows that the molecule changes its orientation on the colloidal silver surface. The appearance of longer wavelength band in the electronic absorption spectra of the sol has been attributed to the coagulation of colloidal silver particles in the sol. The long wavelength band is found to be red-shifted with the decrease in adsorbate concentration. The excitation profile study indicates that the resonance of the Raman excitation radiation with the original sol band is more important than that with the new aggregation band for the SERS activity. This indicates a large contribution of electromagnetic effect to surface enhancement.     

A new aptameric biosensor for cocaine based on surface-enhanced Raman scattering spectroscopy

The present study reports the proof of principle of a reagentless aptameric sensor based on surface-enhanced Raman scattering (SERS) spectroscopy with "signal-on" architecture using a model target of cocaine. This new aptameric sensor is based on the conformational change of the surface-tethered aptamer on a binding target that draws a certain Raman reporter in close proximity to the SERS substrate, thereby increasing the Raman scattering signal due to the local enhancement effect of SERS. To improve the response performance, the sensor is fabricated from a cocaine-templated mixed self-assembly of a 3'-terminal tetramethylrhodamine (TMR)-labeled DNA aptamer on a silver colloid film by means of an alkanethiol moiety at the 5' end. This immobilization strategy optimizes the orientation of the aptamer on the surface and facilitates the folding on the binding target. Under optimized assay conditions, one can determine cocaine at a concentration of 1 muM, which compares favorably with analogous aptameric sensors based on electrochemical and fluorescence techniques. The sensor can be readily regenerated by being washed with a buffer. These results suggest that the SERS-based transducer might create a new dimension for future development of aptameric sensors for sensitive determination in biochemical and biomedical studies.