Mixed-valence uranium germanate and silicate: Cs(x)(U(V)O)(U(IV/V)O)2(Ge2O7)2 (x = 3.18) and Cs4(U(V)O)(U(IV/V)O)2(Si2O7)2

A new mixed-valence uranium germanate and the silicate analogue have been synthesized under hydrothermal conditions at 600 °C and 165 MPa. Their crystal structures contain infinite -U(V)-O-U(IV/V)-O-U(IV/V)-O-U(V)- chains that are connected by Ge(2)O(7) or Si(2)O(7) groups to form a 3D framework with six-ring channels where the Cs(+) cations are located. Two of the Cs sites in the germanate are partially occupied. Bond-valence-sum calculation and an U 4f X-ray photoelectron spectroscopy study confirm the valence states of the uranium.     

Insights into the Electronic Structure of a U(IV) Amido and U(V) Imido Complex

Reaction of the N-heterocylic carbene ligand ⁱPrIm (L¹) and lithium bis(trimethylsilyl)amide (TMSA) as a base with UCl₄ resulted in U(IV) and U(V) complexes. Uranium's +V oxidation state in (HL¹)₂[U(V)(TMSI)Cl₅] (TMSI=trimethylsilylimido) ( 2 ) was confirmed by HERFD-XANES measurements. Solid state characterization by SC-XRD and geometry optimisation of [U(IV)(L¹)₂(TMSA)Cl₃] ( 1 ) indicated a silylamido ligand mediated inverse trans influence (ITI). The ITI was examined regarding different metal oxidation states and was compared to transition metal analogues by theoretical calculations.     

Electrometric titrations of Cr(VI), Mn(IV), V(V), Co(III) and U(VI) with a standard iron(II) solution in alkaline media containing hexitols

Direct and indirect potentiometric, bipotentiometric and biamperometric titrations with a standard iron(II) solution are described for some inorganic compounds in alkaline media containing hexitols (mannitol, dulcitol and sorbitol). The optimal conditions for titrations based on the Cr(VI) → Cr(III), Mn(IV) → Mn(III) → Mn(II), V(V) → V(IV), Co(III) → Co(II) and U(VI) → U(IV) systems are discussed. Of the hexitols studied, sorbitol has the greatest effect on the value of the redox potential of the Fe(III)/Fe(II) system; the E_f° value is about —1.10 V vs. SCE.     

Titrimetric determination of U(iv) alone and in mixtures with V(IV), Mn(II), Ce(III) and Fe(II)

Summary A rapid and accurate method is described for the potentiometric determination of uranium(IV) with permanganate at room temperature using trace amounts of ortho-phosphoric acid as a catalyst. The procedure has been extended for the differential potentiometric determination of mixtures with vanadium, manganese or cerium. The methods are easy, non-time consuming and free from interference by a large number of foreign ions. Conditions are also developed for the differential photometric determination of uranium and iron in mixtures.Based on these procedures, a differential titrimetric procedure has been developed for determination of iron(III), vanadium(V), chromium(VI) and manganese(VII) [or cerium(IV)] in a single solution at room temperature. This procedure has also been tested on Bureau of Standard samples.

---

Titrimetrische Bestimmung von U(IV) allein und in Mischungen mit V(IV), Mn(II), Ce(III) und Fe(II)Anwendung auf die Analyse von Stählen und Legierungen

Zusammenfassung Eine schnelle und genaue Methode wird beschrieben zur potentiometrischen Bestimmung von Uran(IV) mit Permanganat bei Raumtemperatur unter Verwendung von Spuren Orthophosphorsäure als Katalysator. Das Verfahren wurde auf die differentialpotentiometrische Bestimmung im Gemisch mit V, Mn und Ce ausgedehnt. Die rasch und einfach ausführbare Methode wird durch zahlreiche Fremdionen nicht gestört. Eine differentialphotometrische Bestimmung von U(IV) und Fe(II) im Gemisch wird ebenfalls angegeben, außerdem eine differentialtitrimetrische Bestimmung von Fe(III), V(V), Cr(VI), Mn(VII) [oder Ce(IV)] in einer Lösung. Anwendungsbeispiele für Stähle und Legierungen werden beschrieben.

     

Synthetically persistent, self assembled [V(IV)2V(V)4] polyoxovanadates: facile synthesis, structure and magnetic analysis

Slow diffusion in a H-tube at room temperature of a methanolic solution of [VO(acac)(2)] (Hacac = acetylacetone) and 1,10-phenanthroline (phen) or 2,2'-bipyridine (bipy) into an aqueous solution of sodium pyrophosphate (Na(4)P(2)O(7)) resulted in the serendipitous formation of X-ray quality crystals of mixed-valent, hexameric oxovanadates of general formula [V(6)O(12)(OCH(3))(4)(L)(4)]·solv [L = 1,10-phenanthroline (phen) for 1· 2CH(3)OH · 4H(2)O (1a), and 2,2'-bipyridine (bipy) for 2· 4H(2)O (2a)]. These were characterized by single-crystal X-ray diffraction, IR, elemental and thermogravimetric analysis (TGA). A facile, rationalized synthetic route for the isolation of 1a and 2a could be established following structural determination, involving NaOH in place of Na(4)P(2)O(7) as pH modulator. The use of distilled water (pH 7) as methanolic co-solvent also resulted in crystallization of the two complexes, proving the presence of a base in the reaction scheme is not vital, with slightly pH-depended yields noted for 2a only. A survey of the literature revealed the occurrence of several other procedures, from classical methods to hydrothermal routes, leading to different solvates of 1, the crystal structure of 2 being unreported in any form to date. The precise nature of the molecular assembly in these type of hybrid organic-inorganic poly-vanadates is contradictory in published reports. On the basis of newly acquired high resolution crystal data and supported by magnetic investigation of the samples, we propose herein a formulation as [(V(IV)O)(2)(V(V)O(2))(4)(μ(3)-O)(2)(μ-OCH(3))(4)(L)(4)], with two oxovanadyl(IV) and four dioxovanadyl(V) units per molecule. A net ferromagnetic coupling between the two isolated V(IV) metal centers was measured with literature-consistent J values of +16.1(1) and +19.7(1) cm(-1) for 1a and 2a, respectively [H = -JS(A)·S(B) + S(A)·D·S(B) + βH (g(A)S(A) + g(B)S(B))], suggesting that crystal packing forces do not significantly influence the magnetic properties of this class of materials. A facile route toward the synthesis of the fully-oxidized [V(V)(4)O(8)(CH(3)O)(4)(bipy)(2)] and [V(V)(4)O(6)(CH(3)O)(6)(acac)(2)] tetraoxovanadates is also reported.     

The adsorption behaviour of99Mo(VI),238U(VI),95Zr(IV) and95Nb(V) on alumina

The distribution of Mo(VI) and the interfering radiocontaminants U(VI), Zr(IV) and Nb(V) have been investigated between chromatographic alumina and aqueous hydrochloric acid solutions of concentrations ranging from 0.5M to 11M. At low acidities (less than 1M HCl) the distribution coefficients increase with the decrease of acid concentration, while in the region of 2–4M they increase with the increase of the acid concentration. Above 4M HCl, the increase inK _D continues with the acid concentration for both Zr(IV) and Nb(V), but constant values are reached for U(VI) and Mo(VI).     

Investigation on Concentrated Ⅴ（Ⅳ）/Ⅴ（Ⅴ） Redox Reaction by Rotating Disc Voltammetry

The kinetic characteristics of the concentrated Ⅴ（Ⅳ）/Ⅴ（Ⅴ） couple have been studied at a glassy carbon electrode in sulfuric acid using rotating-disc electrode and cyclic voltammetry. The kinetics of the Ⅴ（Ⅳ）/Ⅴ（Ⅴ） redox couple reaction was found to be electrochemically quasi-reversible with the slower kinetics for the Ⅴ（Ⅴ） reduction than that for the Ⅴ（Ⅳ） oxidation. And, dependence of diffusion coefficients and kinetic parameters of Ⅴ（Ⅳ） species on the Ⅴ（Ⅳ） and H2SO4 concentration was investigated. It is shown that the concentration of active species Ⅴ（Ⅳ） should be over 1 mol·L^-1 for the redox flow battery application. Further, with increasing the Ⅴ（Ⅳ） and H2SO4 concentration, the diffusion coefficients of Ⅴ（Ⅳ） were gradually reduced whereas its kinetics was improved considerably, especially in the case of Ⅴ（Ⅳ） and H2SO4 up to 2 and 4 mol·L^-1.     

Structure and hydrolysis of the U(IV), U(V), and U(VI) aqua ions from ab initio molecular simulations

Ab initio molecular dynamics simulations at 300 K, based on density functional theory, are performed to study the hydration shell geometries, solvent dipole, and first hydrolysis reaction of the uranium(IV) (U(4+)) and uranyl(V) (UO(2)(+)) ions in aqueous solution. The solvent dipole and first hydrolysis reaction of aqueous uranyl(VI) (UO(2)(2+)) are also probed. The first shell of U(4+) is coordinated by 8-9 water ligands, with an average U-O distance of 2.42 ?. The average first shell coordination number and distance are in agreement with experimental estimates of 8-11 and 2.40-2.44 ?, respectively. The simulated EXAFS of U(4+) matches well with recent experimental data. The first shell of UO(2)(+) is coordinated by five water ligands in the equatorial plane, with the average U═O(ax) and U-O distances being 1.85 ? and 2.54 ?, respectively. Overall, the hydration shell structure of UO(2)(+) closely matches that of UO(2)(2+), except for small expansions in the average U═O(ax) and U-O distances. Each ion strongly polarizes their respective first-shell water ligands. The computed acidity constants (pK(a)) of U(4+) and UO(2)(2+) are 0.93 and 4.95, in good agreement with the experimental values of 0.54 and 5.24, respectively. The predicted pK(a) value of UO(2)(+) is 8.5.     

Stability constants of U(VI) and U(IV)-humic acid complexes

Summary Conditional stability constants have been determined for U(IV) and U(VI) Boom Clay humic acid (BCHA) and Aldrich humic acid (AHA) complexes, under anaerobic and carbonate free conditions. The constants are needed for nuclear waste repository performance assessment purposes. The U(IV) constants were obtained by developing an approach based on the solubility product of amorphous U(OH)₄. The U(VI) constants were obtained by applying the Schubert ion-exchange approach.     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Liquid – liquid extraction behavior of V(IV) using phosphinic acids as extractants

The extraction behavior of V(IV) in the presence of Mo(VI), W(VI), U(VI), V(V), Ti(IV), Al(III), Cr(III), Fe(III), Mn(II), Zn(II) and Pb(II) has been studied using two alkylphosphinic acid extractants, Cyanex 272 and 301. The effect of various parameters, such as the nature of diluent, the type of mineral acid and the concentration of the acid, and metal ions has been investigated. The loading and recycling capacity of the extractants has been assessed. Based on the distribution data some binary separations from V(IV) were achieved. Received: 24 October 1996 / Revised: 2 July 1997 / Accepted: 5 July 1997     

Hydration structures of U(III) and U(IV) ions from ab initio molecular dynamics simulations

We apply DFT+U-based ab initio molecular dynamics simulations to study the hydration structures of U(III) and U(IV) ions, pertinent to redox reactions associated with uranium salts in aqueous media. U(III) is predicted to be coordinated to 8 water molecules, while U(IV) has a hydration number between 7 and 8. At least one of the innershell water molecules of the hydrated U(IV) complex becomes spontaneously deprotonated. As a result, the U(IV)-O pair correlation function exhibits a satellite peak at 2.15 A? associated with the shorter U(IV)-(OH(-)) bond. This feature is not accounted for in analysis of extended x-ray absorption fine structure and x-ray adsorption near edge structure measurements, which yield higher estimates of U(IV) hydration numbers. This suggests that it may be useful to include the effect of possible hydrolysis in future interpretation of experiments, especially when the experimental pH is close to the reported hydrolysis equilibrium constant value.     

Preparation of no-carrier-added48V(IV) and48V(V) for biological tracer use

The preparation of no-carrier-added⁴⁸V(IV) and⁴⁸V(V) from a natural titanium target irradiated by a proton beam has been developed. The⁴⁸V recovered from the target by solvent extraction was purified as⁴⁸V(V) with a cation exchange column and then converted to⁴⁸V(IV) by reduction with ethanol. One hour irradiations at 10 A of 18 MeV protons gave approximately 2mCi (a radiochemical yield of 41%) of radiochemically pure and almost salt-free⁴⁸V(IV) and⁴⁸V(V) with high specific activities. They were shown to be suitable for biological tracer use.     

The ratio Pu(V)/Pu(IV) in natural water

The behavior of the ratio Pu(V)/Pu(IV) depends on whether the symbols represent absolute concentrations of soluble species, or fractions of the total soluble plutonium, or insoluble, colloidal substances.Mound is operated by EG&G Mound Applied Technologies for the U.S. Department of Energy under Contract No. DE-AC04-88DP43495.     

EXAFS investigation of U(VI), U(IV), and Th(IV) sulfato complexes in aqueous solution

The local structure of U(VI), U(IV), and Th(IV) sulfato complexes in aqueous solution was investigated by U-L(3) and Th-L(3) EXAFS spectroscopy for total sulfate concentrations 0.05 < or = [SO(4)(2-)] < or = 3 M and 1.0 < or = pH < or = 2.6. The sulfate coordination was derived from U-S and Th-S distances and coordination numbers. The spectroscopic results were combined with thermodynamic speciation and density functional theory (DFT) calculations. In equimolar [SO(4)(2-)]/[UO(2)(2+)] solution, a U-S distance of 3.57 +/- 0.02 Angstrom suggests monodentate coordination, in line with UO(2)SO(4)(aq) as the dominant species. With increasing [SO(4)(2-)]/[UO(2)(2+)] ratio, an additional U-S distance of 3.11 +/- 0.02 Angstrom appears, suggesting bidentate coordination in line with the predominance of the UO(2)(SO(4))(2)(2-) species. The sulfate coordination of Th(IV) and U(IV) was investigated at [SO(4)(2-)]/[M(IV)] ratios > or = 8. The Th(IV) sulfato complex comprises both, monodentate and bidentate coordination, with Th-S distances of 3.81 +/- 0.02 and 3.14 +/- 0.02 Angstrom, respectively. A similar coordination is obtained for U(IV) sulfato complexes at pH 1 with monodentate and bidentate U-S distances of 3.67 +/- 0.02 and 3.08 +/- 0.02 Angstrom, respectively. By increasing the pH value to 2, a U(IV) sulfate precipitates. This precipitate shows only a U-S distance of 3.67 +/- 0.02 Angstrom in line with a monodentate linkage between U(IV) and sulfate. Previous controversially discussed observations of either monodentate or bidentate sulfate coordination in aqueous solutions can now be explained by differences of the [SO(4)(2-)]/[M] ratio. At low [SO(4)(2-)]/[M] ratios, the monodentate coordination prevails, and bidentate coordination becomes important only at higher ratios.     

全钒液流电池高浓度下V(IV)/V(V)的电极过程研究

采用循环伏安、低速线性扫描和阻抗技术, 以石墨为电极, 研究了V(IV)/V(V)在较高浓度下的电极过程. 结果表明, 采用2.0 mol•L-1 的V(IV)溶液时, H2SO4浓度低于2 mol•L-1, V(IV)/V(V)反应极化大, 可逆性差, 表现为电化学和扩散混合控制; H2SO4浓度增至2 mol•L-1以上, V(IV)/V(V)反应的可逆性提高, 转为扩散控制, 且增加H2SO4浓度有利于阻抗的降低; 但H2SO4浓度超过3 mol•L-1, 溶液的粘度和传质阻力大, 阻抗反而增大. 在3 mol•L-1的H2SO4中, 随着V(IV)浓度的增加, 体系的可逆性和动力学改善, 阻抗减小; 但V(IV)浓度超过2.0 mol•L-1, 较高的溶液粘度导致溶液的传质阻力迅速增加, V(IV)/ V(V)的电化学性能衰减, 阻抗增大. 因此, 综合考虑电极反应动力学和电池的能量密度两因素, V(IV)溶液的最佳浓度为1.5～2.0 mol•L-1, H2SO4浓度为3 mol•L-1.     

Deviation between the chemistry of Ce(IV) and Pu(IV) and routes to ordered and disordered heterobimetallic 4f/5f and 5f/5f phosphonates

The heterobimetallic actinide compound UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O was prepared via the hydrothermal reaction of U(VI) and Ce(IV) in the presence of 1,2-phenylenediphosphonic acid. We demonstrate that this is a kinetic product that is not stable with respect to decomposition to the monometallic compounds. Similar reactions have been explored with U(VI) and Ce(III), resulting in the oxidation of Ce(III) to Ce(IV) and the formation of the Ce(IV) phosphonate, Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O, UO(2)Ce(H(2)O)[C(6)H(4)(PO(3)H)(2)](2)·H(2)O, and UO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O. In comparison, the reaction of U(VI) with Np(VI) only yields Np[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O and aqueous U(VI), whereas the reaction of U(VI) with Pu(VI) yields the disordered U(VI)/Pu(VI) compound, (U(0.9)Pu(0.1))O(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·H(2)O, and the Pu(IV) phosphonate, Pu[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. The reactions of Ce(IV) with Np(VI) yield disordered heterobimetallic phosphonates with both M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Np) and M[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Ce, Np) structures, as well as the Ce(IV) phosphonate Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O. Ce(IV) reacts with Pu(IV) to yield the Pu(VI) compound, PuO(2)[C(6)H(4)(PO(3)H)(2)](H(2)O)·3H(2)O, and a disordered heterobimetallic Pu(IV)/Ce(IV) compound with the M[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Ce, Pu) structure. Mixtures of Np(VI) and Pu(VI) yield disordered heterobimetallic Np(IV)/Pu(IV) phosphonates with both the An[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (M = Np, Pu) and An[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (M = Np, Pu) formulas.     

Vanadium(IV) and vanadium(V) complexes of salicyladimine ligands

The synthesis and characterization of a V(IV) and a V(V) complex of the salicyladimine ligand system are described. The reaction of salicylaldehyde and 1,3-diaminohydroxypropane with vanadyl sulfate produced a monomer (VOL1) which, upon heating in methanol, crystallized as a V(V) complex (VO(2)L1). The reaction of 3-methoxysalicylaldehyde, 1,3-diaminohydroxypropane, and vanadyl sulfate resulted in a binuclear complex held together by hydrogen bonding (VOL2). VOL1 was determined to catalyze the epoxidation of cyclohexene better than VOL2. The synthesis and characterization of VOL1, VOL2, and VO(2)L1 are described. The role of each complex as a catalyst for the epoxidation of cyclohexene is investigated. Results indicate that the V(V) complex performs better than either of the V(IV) complexes.     

Rapid and simple chromatographic separation of V(V) and V(IV) using KH-phthalate and their determination by flame atomic absorption spectrometry

A method was developed for the chromatographic separation of V(V) and V(IV) based on the different sorption forces of these vanadium species in C18 columns in presence of KH-phthalate. The vanadium species were detected with a flame atomic absorption spectrometer with acetylene/N₂O flame. The detection limits (3σ) of V(V) and V(IV) were 0.18 μg/mL and 0.15 μg/mL, respectively. The relative standard deviations (N = 5) are 4.2% and 3.4% for 20–20 μg/mL V(V) and V(IV), respectively. The sampling frequency is 75/h. Because of the special interaction occurring between phthalate and V(IV) on the C18 column and the acetylene/N₂O flame atomic absorption detection, practically no interferences can be detected even in large inorganic matrix.     

含钒(IV)和钒(V)的钨锗混合价杂多酸盐的合成及其结构表征

报道了含钒(IV)和钒(V)的钨锗混合价杂多酸盐的合成、电子吸收光谱及单电子还原态的ESR谱。α-和β-[HGeV^I^VV2^VW9O40]^7^-的溶液ESR谱是由40余条超精细线组成的, 表明在阴离子中3个VO6八面体是角顶共用, 且其中一个桥氧原子是质子化的。