Chirality control in the enantioselective arylation of aromatic aldehydes catalyzed by cis-(1R,2S)-2-benzamidocyclohexanecarboxylic acid derived 1,3-aminoalcohols

A series of chiral 1,3-aminoalcohols derived from cis-(1R,2S)-2-benzamidocyclohexanecarboxylic acid were synthesized and applied to the enantioselective arylation of aromatic aldehydes. The reactions exhibited good yields (up to 90%) and moderate to high enantioselectivities (up to 99%). Not only the enantioselectivity but also the stereochemistry of the product were controlled by the substituent effect of the chiral ligands.     

Design and synthesis of new chiral pyridine–phosphite ligands for the copper-catalyzed enantioselective conjugate addition of diethylzinc to acyclic enones

A series of new chiral pyridine–phosphite ligands have been prepared from (R)-pyridyl alcohols and BINOL-derived chlorophosphite, and successfully employed in the copper-catalyzed enantioselective conjugate addition of diethylzinc to acyclic enones. Using the simple and inexpensive CuBr₂ as a precursor, the enantioselective additions to various substituted acyclic enones afforded products in high yields and good enantioselectivities (up to 92% ee).     

Chiral amino-urea derivatives of (1R,2R)-1,2-diaminocyclohexane as ligands in the ruthenium catalysed asymmetric reduction of aromatic ketones by hydride transfer

Several new chiral urea and thiourea ligands have been prepared by reaction of (1R,2R)-1,2-diaminocyclohexane with various organic isocyanates and isothiocyanates. These were used as ligands in the ruthenium catalysed enantioselective reduction of aromatic ketones by isopropanol. The reduction proceeded at room temperature using 2 mol% of ruthenium catalyst to give good yields of the (R)-alcohol with enantiomeric excesses of up to 83%. By contrast, the use of bis-urea ligands gave much lower enantioselectivities. Amino-thiourea ligands led to the (S)-alcohol with low enantiomeric excess.     

trans-(2R,3R)-2,3-Diphenylcyclopropane-1,1-dimethanol: a pivotal diol for the synthesis of novel C2-symmetric ligands for asymmetric transition metal catalysis

Various chiral ligands bearing phosphorus or nitrogen donor atoms were obtained in a straightforward manner starting from trans-(2R,3R)-diphenylcyclopropane-1,1-dimethanol as a key structure. These chiral ligands were tested and compared in palladium(0)-catalyzed asymmetric allylic alkylation reactions (up to 71% ee) and rhodium(I)-catalyzed asymmetric hydrogenations (up to 88% ee). Moreover, in the asymmetric allylic alkylation, we observed excellent activity with a diphosphinite ligand (TOF = 600 mol 17 × [mol Pd × h)^?1].     

Structural and electronic effects of oxazolidine ligands derived from (1R,2S)-ephedrine in the asymmetric addition of diethylzinc to aldehydes

The purpose of this research was to determine the activity of chiral oxazolidine ligands prepared from (1R,2S)-ephedrine for the enantioselective addition of diethylzinc to aldehydes. The configuration on the newly formed C2 stereogenic center was determined as (2S) by X-ray structural analysis. Oxazolidine ligands reveal medium enantioselectivity with the ee exceeding 57%, and the yields obtained being 68–99%. The results indicate that the absolute configuration of the addition product depends not only on the N3-methyl as an important stereocontrol element but also on both the electronic and steric effects of the substrates and oxazolidine ligands.     

Synthesis of phosphorylated sulfoximines and sulfinamides and their application as ligands in asymmetric metal catalysis

Starting from inexpensive materials and following simple protocols various N-phosphorylated sulfoximines and sulfinamides have been synthesized. The newly prepared compounds were then applied as chiral ligands in asymmetric transition metal catalysis. Phosphorus triamide-type ligands derived from (S)-glutamic acid were found to be the most efficient stereoselectors in enantioselective palladium-catalyzed allylic substitutions (up to 97% ee). On the other hand, diamidophosphite-type structures stemming from (S)-proline were the best ligands in rhodium-catalyzed hydrogenation reactions (up to 84% ee).     

Copper-catalyzed enantioselective conjugate addition of diethylzinc using axially chiral aminoethyloxy-phosphine ligands

New axially chiral P,O,N-type ligands bearing both a diphenylphosphino group and 2-(dialkylamino)ethyloxy (or 2-pyridylmethyloxy) groups were designed and prepared along with P,O,O-type ligands by employing an easily available chiral component, (R)-2-hydroxy-2′-diphenylphosphinyl-1,1′-binaphthyl. Among the ligands the simplest P,O,N-type one bearing a 2-(dimethylamino)ethyloxy group was found to be the most efficient in copper-catalyzed enantioselective conjugate addition of diethylzinc to a cyclic enone, 2-cyclohexen-1-one, providing high enantioselectivity up to 99% ee.     

Asymmetric addition of Grignard reagents to ketones: culmination of the ligand-mediated methodology allows modular construction of chiral tertiary alcohols

A new class of biaryl chiral ligands derived from 1,2-diaminocyclohexane (1,2-DACH) has been designed to enable the asymmetric addition of aliphatic and, for the first time, aromatic Grignard reagents to ketones for the preparation of highly enantioenriched tertiary alcohols (up to 95% ee). The newly developed ligands L12 and L12′ together with the previously reported L0 and L0′ define a set of complementary chiral promoters, which provides access to the modular construction of a broad range of structurally diverse non-racemic tertiary alcohols, bearing challenging quaternary stereocenters. The present advancements bring to completion our asymmetric Grignard methodology by expanding the scope to aromatic organomagnesium reagents, while facilitating its implementation in organic synthesis thanks to improved synthetic routes for the straightforward access to the chiral ligands. The synthetic utility of the method has been demonstrated by the development of a novel and highly enantioselective formal synthesis of the antihistamine API clemastine via intermediate (R)-3a. Exploiting the power of the 3-disconnection approach offered by the Grignard synthesis, (R)-3a is obtained in 94% ee with ligand (R,R)-L12. The work described herein marks the finalization of our ongoing effort towards the establishment of an effective and broadly applicable methodology for the asymmetric Grignard synthesis of chiral tertiary alcohols.

Easily applied enantioselective addition of aliphatic and aromatic Grignard reagents to ketones provides modular and universal access to challenging chiral tertiary alcohols, enabling the straightforward preparation of natural products and APIs.     

New P,N-ferrocenyl ligands for rhodium-catalyzed hydroboration and palladium-catalyzed allylic alkylation

A set of nine new chiral P,N-ferrocenyl ligands for metal-catalyzed enantioselective reactions has been prepared. The rhodium-catalyzed hydroboration of styrene with catechol borane proceeded with high regioselectivity (up to 97:3) or with high enantioselectivity (up to 92% ee) depending on the catalyst. Good results were also obtained in the palladium-catalyzed asymmetric alkylation of 1,3-diphenylallylic systems (up to 94% ee).     

Synthesis of sterically constrained tricyclic pyrrolidinyl alcohol ligands for the enantioselective ethylation of aryl aldehydes: assessment of the influence of ring strain and N-alkyl chain length on asymmetric induction

A series of chiral sterically constrained tricyclic pyrrolidinyl alcohol ligands were synthesized from the appropriate amino acids, and a comparative study of the activity and selectivity of the ligands for the enantioselective ethylation of aromatic aldehydes was carried out. The results obtained were compared with those previously reported for related monocyclic analogues; it was found that the bicyclo[2.2.2]octane backbone fused to pyrrolidine and the groups attached to the carbinol centre, as well as the chain length of the β-amino alcohol, had a marked effect on the enantioselectivity. The enantioselective addition of dialkylzincs to aryl aldehydes in the presence of ligands with diethyl substituents on the carbinol carbon afforded (R)-sec-alcohols in up to 99% enantiomeric excess (ee).     

Asymmetric cyclopropanation catalyzed by C2-symmetric bis-(ephedrine)-Cu(II) complexes

The asymmetric cyclopropanation of styrene with alkyl diazoacetate was performed with a series of Cu(II) complexes of novel chiral ligands, which were derived from substitution of 1,3-dibromopropane, 1,2-dibromoethane, α,α′-dibromo-m-xylene and 2,6–bis(bromomethyl)pyridine with 1R, 2S-(−)-ephedrine. These prepared catalysts shown to be highly active in the enantioselective cyclopropanation with ee higher than 89% under the optimal conditions.     

Synthesis of N-α-pyridylmethyl amino alcohols and application in catalytic asymmetric addition of diethylzinc to aromatic aldehydes

A series of novel chiral ligands 2a–2f were conveniently prepared from β-amino alcohols through a two-step reaction and applied to catalyze the enantioselective addition of diethylzinc to benzaldehyde. Among them, ligand 2c was found to show the best asymmetric induction and catalyze the reaction of various aromatic aldehydes to provide (R)-secondary alcohols in up to 98.3% ee.     

C2-Symmetric diphenylphosphoramide and diphenylthiophosphoramide derived from (1R,2R)-1,2-diaminocyclohexane as ligands for the titanium(IV) alkoxide-promoted addition of diethylzinc to aldehydes

Chiral C₂-symmetric diphenylphosphoramide 4 and diphenylthiophosphoramide 5 were prepared from the reaction of diphenylphosphinic chloride and diphenylthiophosphinic chloride with (1R,2R)-(−)-1,2-diaminocyclohexane in the presence of diisopropylethylamine in high yields. They were used as chiral ligands in the catalytic asymmetric addition reaction of diethylzinc to aldehydes in the presence of titanium(IV) isopropoxide to give the corresponding sec-alcohols in 70–83% ee with an (R)-configuration and in 40–50% ee with an (S)-configuration, respectively.     

Chemo-biological preparation of the chiral building block (R)-4-acetoxy-2-methyl-1-butanol using Pseudomonas putida

In order to develop new methyl substituted chiral building blocks which are useful for the synthesis of methyl branched natural products, the enantioselective bioreduction of an exo-methylene to a methyl group was investigated. 4-Acetoxy-2-methylene-1-butanol 3 was prepared from itaconic acid over four steps and converted to the chiral alcohol (R)-4-acetoxy-2-methyl-1-butanol 4, by growing cells of Pseudomonas putida. The bioconversion achieved a high enantioselectivity (92% ee) and a high chemical yield (65%) within a relatively short reaction time (18–20 h).     

The synthesis of chiral N-tosylatedaminoimine ligands and their application in enantioselective addition of phenylacetylene to imines

A class of new chiral tridentate N-tosylatedaminoimine ligands were synthesized and used in the Cu(I)-catalyzed enantioselective addition of phenylacetylene to imines. Good enantioselectivities in up to 91% ee were obtained.     

A new chiral 2-sulfonylamino-2′-phosphino-1,1′-binaphthyl ligand for highly enantioselective copper-catalyzed conjugate addition of diethylzinc to benzylideneacetones

A new axially chiral phosphine-sulfonamide ligand was prepared via a chiral component (R)-2-amino-2′-diphenylphosphinyl-1,1′-binaphthyl, which was conveniently synthesized through a new route involving hydrolysis of (R)-2-cyano-2′-phosphinyl-1,1′-binaphthyl followed by Hofmann rearrangement of the amide group. The new ligand was found to be very efficient in copper-catalyzed enantioselective conjugate addition of diethylzinc to acyclic enones such as benzylideneacetones, providing very high enantioselectivity up to 99% ee.     

Catalytic enantioselective conjugate addition of dialkyl zinc reagents to α,β-unsaturated ketones mediated by new phosphite ligands containing binaphthalene/1,2-diphenylethane moieties: a practical synthesis of (R)-(−)-muscone

New diastereoisomeric phosphites based on either (R)- or (S)-2,2′-dihydroxy-1,1′-binaphthyl (BINOL) and having the chiral alcoholic moiety derived from the monobenzyl ether of (R,R)-1,2-diphenylethane-1,2-diol have been prepared and used as chiral ligands in the enantioselective copper-catalyzed 1,4-addition of diethylzinc to chalcone and 2-cyclohexen-1-one (enantiomeric excesses up to 48%). With the (aR,R,R) ligand dimethylzinc adds enantioselectively to (E)-cyclopentadecen-2-en-1-one to give (R)-(−)-muscone (68% yield, 78% ee). This provides an efficient access to a valuable ingredient of the perfume industry. However, with the (aS,R,R) ligand, (S)-(+)-muscone is obtained with longer reaction times (37% yield and 10% ee) with a very high double diastereoselection effect being observed.     

Enantioselectivity switch controlled by N,N′-di- or N,N,N′,N′-tetra-substituted chiral thiophosphorodiamide ligands,structural relatives of thioureas,in catalytic additions of diethylzinc to aldehydes

We have developed a series of new chiral thiophosphorodiamide ligands derived from (1R,2R)-(+)-1,2-diphenylethylenediamine, which are the structural relatives of thioureas. An investigation into their catalytic properties in asymmetric additions of diethylzinc to aldehydes has shown that N,N,N′,N′-tetra-substituted chiral thiophosphorodiamides can give (R)-secondary alcohols with up to 98% yield and 98% ee, while N,N′-di-substituted chiral thiophosphorodiamides give (S)-secondary alcohols with up to 99% yield and 97% ee values. The enantioselectivity switch is highly efficient with a broad substrate scope. We have also proposed hypothetical reaction pathways, which result in an enantioselectivity switch.     

Development of a new class of C1-symmetric bisphosphine ligands for rhodium-catalyzed asymmetric hydrogenation

A new class of C₁-symmetric bisphosphine ligands with three hindered quadrants have been obtained through facile synthesis from chiral BINOL derivatives. Their rhodium complexes have exhibited high enantioselectivities (up to 98% ee) in the asymmetric hydrogenation of various unsaturated prochiral olefins, providing an efficient catalytic system for the enantioselective synthesis of chiral amino acids and amines.     

Complementing Pyridine‐2,6‐bis(oxazoline) with Cyclometalated N‐Heterocyclic Carbene for Asymmetric Ruthenium Catalysis

A strategy for expanding the utility of chiral pyridine‐2,6‐bis(oxazoline) (pybox) ligands for asymmetric transition metal catalysis is introduced by adding a bidentate ligand to modulate the electronic properties and asymmetric induction. Specifically, a ruthenium(II) pybox fragment is combined with a cyclometalated N‐heterocyclic carbene (NHC) ligand to generate catalysts for enantioselective transition metal nitrenoid chemistry, including ring contraction to chiral 2H‐azirines (up to 97 % ee with 2000 TON) and enantioselective C(sp³)?H aminations (up to 97 % ee with 50 TON).