Enantioselective synthesis of each stereoisomer of the pyranoid linalool oxides: the linalool route

Each of the four enantiomerically pure tetrahydropyran linalool oxides was prepared by separate enantioselective Sharpless dihydroxylation of (R)- or (S)-linalyl acetate with AD-mix-α or AD-mix-β, followed by a completely stereoselective N-phenylselenophthalimide cyclization of an intermediate allylic alcohol.     

Enantioselective syntheses of (+)- and (−)-brazilin

Two enantiomers of brazilin were prepared in 9 steps from 7-hydroxychroman-4-one using the AD-mix-α and AD-mix-β-directed enantioselective dihydroxylation of 3-(4-hydroxy-3-methoxyphenyl)-2H-chromen-7-ol as a key step.     

Asymmetric oxidation of enol phosphates to α-hydroxy ketones using Sharpless reagents and a fructose derived dioxirane

The asymmetric oxidation of a variety of differently substituted, acyclic and cyclic enol phosphates using the Sharpless AD-reagents AD-mix-α and AD-mix-β, and a fructose derived chiral ketone as a catalyst, afforded the corresponding α-hydroxy ketones in high enantioselectivity and good yield. The influence of steric and electronic factors of the substrates on the facial stereoselectivity in the reported oxidations was studied.     

Enantioselective synthesis of lyxo-(2R,3R,4R)-C18-phytosphingosine using double stereodifferentiation

lyxo-C₁₈-Phytosphingosine can be synthesized by the cis-dihydroxylation of an (E)-allylic trichloroacetamide obtained by an Overman rearrangement. A double stereodifferentiation using AD-mix-β and an enantiomerically enriched (S)-allylic trichloroacetamide allowed the first synthesis of lyxo-(2R,3R,4R)-C₁₈-phytosphingosine with high diastereoselectivity (de=94%) and excellent enantioselectivity (ee=93%). This sphingosine was fully characterized by the physical and spectral data of the corresponding tetraacetate.     

A rare case of facial selectivity inversion for Sharpless asymmetric dihydroxylation in a series of structurally homogeneous substrates: synthesis of non-racemic 3-(nitrophenoxy)-propane-1,2-diols

Asymmetric dihydroxylation of mono nitrophenyl allyl ethers leads to the corresponding non-racemic 3-(nitrophenoxy)-propane-1,2-diols 1a–c. As this takes place, regardless of the reagent used (AD-mix-α or AD-mix-β), the configuration of the predominant enantiomer for the para- and meta-nitrosubstituted products is opposite to the configuration of the ortho-nitrophenyl derivative. A correlation between the melting points and vibrational spectra of the racemic and enantiopure diols 1a–c allowed us to establish that all of the chiral substances investigated formed stable racemic compounds in the solid phase.     

The Role of the C-3 Substituent in the Asymmetric Dihydroxylation of Hexo-5-Enofuranosides

ABSTRACT

Asymmetric dihydroxylation of vinyl furanosides 1-6 by use of OsO₄, AD-mix-α® and β® is described yielding the corresponding hexofuranose sugars. Vinyl furanosides 2 and 3, with an ester group at C-3, and vinyl manno furanoside 5 on asymmetric dihydroxylation with AD-mix α® exhibited high R diastereoselectivity at C-5. Reversal in diastereoselectivity at C-5 was observed for the 3-deoxy vinyl furanoside 6 giving furanosaccharide 6S with the S configuration at C-5.     

Stereoselective synthesis of (−)-8-epi-swainsonine starting with a chiral aziridine

An efficient synthesis of (?)-8-epi-swainsonine, starting from a commercially available 1-(R)-α-methylbenzylaziridine-2-methanol, was developed. The synthetic route utilizes stereocontrolled Sharpless asymmetric dihydroxylation governed by AD-mix-β followed by an aziridine ring opening-cyclization sequence to generate the five membered N-heterocyclic ring system present in the bicyclic target. A subsequent stereoselective allylation and piperidine ring forming cyclization then produced a precursor that was converted into (?)-8-epi-swainsonine.     

An enantioselective total synthesis of the stilbenolignan (−)-aiphanol and the determination of its absolute stereochemistry

The title natural product (−)-aiphanol has been prepared by total synthesis. A key step involved the asymmetric dihydroxylation of (E)-3,5-dimethoxy-4-(methoxymethoxy)cinnamyl alcohol with the AD-mix-β to give triol (1R,2R)-1-(3′,5′-dimethoxy-4′-methoxymethoxyphenyl)-2,3-dihydroxypropanol, the absolute stereochemistry of which was confirmed by single-crystal X-ray analysis of a readily available bromo-derivative. These studies have established that the naturally occurring enantiomer of aiphanol possesses the (S)-configuration at each of C-2′ and C-3′.     

Enantioselective synthesis of 2-allyl and 2-(3-trimethylsilylpropargyl)-2-hydroxycyclohexanone using osmium-catalyzed asymmetric dihydroxylation

The catalytic asymmetric dihydroxylation of (1-cyclohexenyl) or (1-cyclopentenyl) acetonitrile 5 and 15 with AD-mix-β occurred with good enantiofacial selectivity (87 to 94.7% ee after recrystallization) giving (R,R)-diols in agreement with the mnemonic device. The 6-membered ring diol nitrile was easily transformed, via standard functional group manipulations, to 2-allyl and 2-(3-trimethylsilylprop-2-ynyl)-2-hydroxycyclohexanone in about 35% overall yield.     

The first asymmetric synthesis of all four isomers of cis- and trans-3,4-dihydroxy-3,4-dihydromollugin

Asymmetric synthesis of all the four stereoisomers of cis-3,4-dihydroxy-3,4-dihydromollugins 4 and 6 and trans-3,4-dihydroxy-3,4-dihydromollugins 5 and 7 was achieved. The O-methoxymethyl mollugin derivatives were dihydroxylated to (−)- and (+)-cis-3,4-dihydroxy-3,4-dihydromollugin derivatives using both AD-mix-α and AD-mix-β. Deprotection of the MOM-ethers of cis-dihydroxy compounds resulted in the targeted stereoisomers (−)-(3R,4R)-cis-3,4-dihydroxy-3,4-dihydromollugin 4, (−)-(3R,4S)-trans-3,4-dihydroxy-3,4-dihydromollugin 5, (+)-(3S,4S)-cis-3,4-dihydroxy-3,4-dihydromollugin 6 and (+)-(3S,4R)-trans-3,4-dihydroxy-3,4-dihydromollugin 7. These routes were paved with difficulties, for example, incompatibility of the substrates with AD-mixes, the unexpected formation of trans-dihydroxy compounds and failures in deprotection protocols.     

Synthesis and x-ray crystal structure of the TiMgCl5(OOCCH2Cl) · (ClCH2COOC2H5)3 Adduct

The synthesis of the TiMgCl₅(OOCCH₂Cl) · (ClCH₂COOC₂H₅)₃ adduct, obtained by reacting TiCl₄ with a solution of MgCl₂ in dry ClCH₂COOC₂H₅, is reported together with its molecular and crystal structure as determined by x-ray diffraction. The structure was solved by direct and Fourier methods and refined by least-squares techniques to R = 0.057 for 1318 independent observed reflections. Crystals are monoclinic, space-group P2₁/c, with 4 formula units in a unit-cell of dimensions a = 10.480(4), b = 19.641(9), c = 16.597(6) Å, β = 120.21(5)°. The titanium(IV) atom is octahedrally coordinated by five chlorine atoms and an oxygen atom of a OOCCH₂Cl residue. The magnesium atom is similarly coordinated by two chlorine atoms, the carbonyl oxygen atoms of three ClCH₂COOC₂H₅ molecules and an oxygen atom of the OOCCH₂Cl residue. The two octahedra share an edge by a double chlorine bridge between the magnesium and the titanium atoms and are also connected by the COO group of the OOCCH₂Cl residue. Changes in the configurations and dimensions with respect to the free acceptor and donor molecules are discussed.     

On the magnetic properties and the phase composition of the Cr2O3?MnOx-system (2 ≥ x ≥ 1.5)

The mixed oxide system Cr₂O₃? MnO_x (2 ≥ x ≥ 1.5) was investigated by X-ray diffraction, by measurements of magnetic susceptibility, and by chemical determination of excess oxygen (BUNSEN'S method). The Presence of the antiferromagnetic oxides Cr₂O₃, β-MnO₂, α-Mn₂O₃ and a ferromagnetic phase Cr_1?yMn_yO₂ was stated. The formation of the latter with fourvalent chromium is explained by a lattice induction effect of the MnO₂ (rutile type).     

Ba8Cu16P30 – eine neue ternäre Variante des Clathrat I-Strukturtyps

Ba₈Cu₁₆P₃₀ – a New Ternary Variant of the Clathrate I Type Structure Ba₈Cu₁₆P₃₀ (a = 14.117(1) Å, b = 10.093(1) Å, c = 28.022(2) Å) was prepared by heating a mixture of the elements (800°C; excess of Ba and P; removal of the by-products by acetic acid/H₂O₂). The compound crystallizes orthorhombically (Pbcn; Z = 4) in a new superstructure of the cubic clathrate I type structure with an ordered distribution of the atoms. The structure is characterized by a three-dimensional framework of CuP₄ tetrahedra with cavities in the form of pentagonal dodecahedra and tetrakaidecahedra, which are occupied by the Ba atoms. The compound shows semiconduction, therefore the composition should be Ba₈Cu_15.5P_30.5.     

Hematite template route to hollow-type silica spheres

Hollow-type silica spheres with controlled cavity size were prepared from Fe₂O₃-SiO₂ core-shell composite particles by selective leaching of the iron oxide core materials using acidic solution. The spherical Fe₂O₃ core particles with a diameter range of 20-400 nm were first prepared by the hydrolysis reaction of iron salts. Next, the Fe₂O₃-SiO₂ core-shell particles were prepared by the deposition of a SiO₂ layer onto the surface of Fe₂O₃ particles using a two-step coating process, consisting of a primary coating with sodium silicate solution and a subsequent coating by controlled hydrolysis of tetraethoxysilicate (TEOS). The Fe₂O₃ core was then removed by dissolving with acidic solution, giving rise to hollow-type silica particles. Scanning electron microscopy clearly revealed that the cavity size was closely related to the initial size of the core Fe₂O₃ particle. According to the cross-sectional view obtained by transmission electron microscopy, the silica shell thickness was about 10 nm. The porous texture of the hollow-type silica particles was further characterized by nitrogen adsorption-desorption isotherm measurements.     

The influence of different additives and the mode of their addition on the sintering behavior and the properties of semiconducting barium titanate ceramics

The influence of different additives (TiO₂, TiO₂/SiO₂, CaO/TiO₂/SiO₂, 2BaO/TiO₂/2SiO₂) and the mode of their incorporation (spray drying: series 1; mixed-oxide method: series 2) on the sintering behavior and the microstructural and electrical properties of n-doped BaTiO₃ ceramics has been investigated. The incorporation of the additives from their aqueous solution by spray drying produces a homogeneous distribution of the additive in the BaTiO₃ matrix powder by coating the BaTiO₃ particles. This homogeneous distribution significantly lowers the activation energy for the densification process compared with that of the powders of series 2. Dynamic and isothermal dilatometric measurements revealed that the sintering process is considered as a classical solid phase sintering followed by recrystallization of the BaTiO₃ matrix particles by a eutectic melt. The densification process is dominated by sliding processes. These sliding processes are caused by the amorphous layer of the additive and by the defect-rich grain boundary layers of the BaTiO₃ grains generated intermediately by diffusion processes and reactions of the matrix material with the additive forming the secondary phases Ba₂TiSi₂O₈ and Ba₄Ti₁₃O₃₀, respectively. In series 1, ceramics with a homogeneous microstructure and useful electrical properties (e.g. low resistivity at room temperature) were already produced at a sintering temperature of 1280°C (with SiO₂-containing additives) due to the homogeneous distribution of the additive. The ceramics of series 2 sintered at the same temperature could only be obtained in poor quality. At higher sintering temperatures the differences between the two series vanished.     

Triäthanolaminkomplexe. II. Die Kristallstruktur von 2 ZnCl2 · C6H15O3N · H2O

The crystal structure of 2 ZnCl₂ · C₆H₁₅O₃N · H₂O has been determined by direct methods. The triethanolamine complex crystallizes in space group P 2₁/c with a₀ = 10.86, b₀ = 10.08, c₀ = 14.09 Å, β = 93.5° und Z = 4. The structure has been refined by least squares methods. Final R₁ index is 4.4% for 579 reflexions. One half of the zinc atoms are octahedrally coordinated by a chlorine atom, a water molecule and by the nitrogen and the three oxygen of the triethanolamine molecule. The other half is tetrahedrally surrounded by chlorine. The two zinc complexes are connected via a common chlorine atom.     

Bismuth triple-decker phthalocyanine: synthesis and structure

Triclinic crystals of bismuth(III) triple-decker phthalocyanine, Bi₂Pc₃, Pc=C₃₂H₁₆N₈²⁻, were grown directly by the reaction of Bi₂Se₃ with 1,2-dicyanobenzene at 220°C. The Bi₂Pc₃ molecule is centrosymmetric with the bismuth atoms located closer to the peripheral phthalocyaninato(2−) rings than to the central ring. Each bismuth(III) ion is connected by four N-isoindole atoms to the peripheral and by four N-isoindole to the central Pc ring with average distances of 2.333 and 2.747 Å, respectively. This indicates a stronger connection of Bi(III) to the peripheral saucer-shaped macrocyclic rings than to the central rings. The neighbouring phthalocyaninato(2−) moieties in the Bi₂Pc₃ molecule are separated by a distance of 3.101(5) Å. The central Pc ring is rotated by 36.4° with respect to the peripheral ones. Differences in Bi–N bond lengths are a result of interaction of the bismuth ion with peripheral and central rings as well as the repulsion forces between two bismuth ions in the same Bi₂Pc₃ molecule, which are separated by a distance of 3.839(2) Å. The crystal packing is characterized by a distance of 3.56 Å between Pc rings of neighbouring Bi₂Pc₃ molecules.     

Cyclization and Isomerization Reactionsin Silylhydrazine Chemistry

 This review describes the synthesis and isomerization reactions of cyclic silylhydrazines. Topics of discussion are the ring expansion of the three-membered Si(SiN₂) to the four-membered (SiN)₂ ring by lithiation of the (SiN₂) ring and by thermal silyl group insertion into the N*N bond, the ring expansion of a three-membered (SiN₂) to a five-membered (CSi₂N₂) ring by SiCH₂ insertion into the Si*N bond, the formation of isomeric four- and six-membered (SiN₂)₂ rings, the synthesis of five- and six-membered silylhydrazine rings, and the expansion of a five-membered (N₂Si₂N)N ring to the isomeric six-membered (SiNN)₂ ring. The mechanisms of the isomerizations are explained by quantum chemical calculations, and the results are verified by crystal structure determinations.     

Die Platiniodide PtI2 und Pt3I8

Platinum Iodides PtI₂ and Pt₃I₈ Powder samples of tetragonal Pt₃I₈ (a = 1166.4(1); c = 1068.2(2) pm) and the cubic α-form of PtI₂ (a = 1109 pm) were obtained by thermal decomposition of PtI₄ in closed quarz ampoules at a I₂ pressure of 2–3 bar and 8 bar, respectively, and at 320°C and 430°C and 430°C, respectively. Single crystals of the monoclinic α-Form of PtI₂ (a = 658.77(6); b = 871.50(34), c = 688.94(11) pm; β = 102.76°; Z = 4) were formed by hydrothermal synthesis from PtI₄, KI, and I₂ at 420°C. In the crystal structure of β-PtI₂ two square planar PtI₄-units are connected by a common edge to planar Pt₂I₆ groups which are linked by common corners to puckered layers. Crystals of Pt₃I₈ synthesized by hydrothermal synthesis from PtI₄, KI, and I₂ at 350°C were twinned and showed defects. As the result of X-ray studies the compound can be formulated as a mixed-valence platinum(II,IV) iodide PtI₄ · 2 PtI₂. Octahedral PtI₆ and square planar PtI₄ units are linked together to a three dimensional skeleton.     

Synthese de materiaux polymeres transparents. Partie I Synthese du trifluoroacrylate de trideuteromethyle

The acrylic ester F₂CCFCO₂CD₃ is prepared from a mixture of difluorotetrachloroethanes CFCI₂CFCI₂ and CF₂CICCI. The dehalogenation of these Freons, followed by the addition of CFCI₃ by means of AICI₃ leads to a mixture of chlorofluoropropanes. The hydrolysis with oleum gives the acid chlorides which are then esterified by CD₃OD. The dehalogenation of the mixture by the zinc stirred in oxalic acid enables isolation of the expected ester by distillation. This compound, the refractive index of which n²⁰_D=1.3667 does not show a major absorption in the near infra-red between 0.6 and 1.4 μm. Thus the corresponding polymer is likely to provide a good material for the core of optical fibers.