Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).     

Simultaneous determination of sodium dodecyl sulphate and sodium linear-dodecylbenzenesulphonate with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide by spectrophotometry

A rapid and sensitive spectrophotometric method for the simultaneous determination of sodium dodecyl sulphate (SDS) and sodium linear-dodecylbenzenesulphonate (DBS) with 1-stearyl-4-(4-aminonaphthylazo)-pyridinium bromide (SAPB) is described using the difference at the maximum absorption wavelength of the SDS- and the DBS-ion associate. SDS and DBS have been determined independently by measuring their respective absorbances at the maximum absorption wavelength. The apparent molar absorptivities of the SDS- and the DBS-ion associate are 8.0×10⁴ l mol^–1 cm^–1 at 445 nm and 4.5×10⁴ l mol^–1 cm^–1 at 424 nm, respectively. The calibration graph for SDS is linear in the range from 0.1 to 1.0×10^–6 mol/l in the presence of 1.2×10^–6 mol/l DBS and for DBS from 0.8 to 2.0×10^–6 mol/l in the presence of 8.0×10^–7 mol/l SDS. The relative standard deviation (n=15) for 8.0×10^–7 mol/l SDS is 3.4% and for 1.6×10^–6 mol/l DBS 2.1%. The proposed method has been applied to the simulatenous determination of SDS and DBS in river water samples.     

Gas-Chromatographic Determination of Sarin, Soman, and O-Isobutyl S-2-(N,N-Diethylamino)ethyl Methylphosphonothioate (a VX-Like Compound) Traces in Water

A gas-chromatographic procedure for the determination of O-isobutyl S-2-(N,N-diethylamino)ethyl methylphosphonothioate (VX), sarin, and soman in water at levels of 2 × 10^–6, 5 × 10^–5, and 2 × 10^–6 mg/L, respectively, was proposed. The procedure includes liquid–liquid extraction with the use of salting-out agents, back extraction, and evaporation. In this case, the VX compound was converted into O-isobutyl O-methyl methylphosphonate (a substance convenient for chromatographic determination) by the reaction with hydrochloric acid, methanol, thriethylamine, and silver nitrate.     

Micro-pumping flow system for spectrophotometric determination of anionic surfactants in water

A novel procedure has been developed for spectrophotometric determination of anionic surfactants in water using a solenoid micro-pump as fluid-propulsion device. The proposed method is based on substitution of methyl orange (MO) by anionic surfactants in the formation of an ion-pair with the cetyl pyridine ion (CPC⁺) at pH 5.0. The flow network comprised four solenoid micro-pumps which, under microcomputer control, enabled sample and reagent introduction, and homogenisation in the reaction zone. The system is flexible and simple to operate and control, and sensitive and precise. The analytical plot for the anionic surfactant was linear between 1.43×10^–6 and 1.43×10^–5 mol L^–1 (0.5 to 5.0 mg L^–1; R=0.997, n=5). The relative standard deviation was 0.8% (n=11) for a sample containing 5.74×10^–6 mol L^–1 (2 mg L^–1) surfactant. The limit of detection was 9.76×10^–8 mol L^–1 (0.034 mg L^–1) and the sampling throughput was 60 determinations per hour. The results obtained for washing-water samples were comparable with those obtained by use of the reference method, and no significant differences at the 95% confidence level were observed.     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Synergistic extraction behavior of samarium(III), europium(III) and dysprosium(III) with 1-nitroso-2-naphthol and 1,10-phenanthroline

The equilibrium extraction behavior of Sm(III), Eu(III) and Dy(III) from aqueous NaClO₄ solutions in the pH range of 4–9 at 0.1 M ionic strength into organic solutions of 1-nitroso-2-naphthol (HA) and 1,10-phenanthroline (Phen) has been studied. The equilibrium concentrations of Eu were assayed through the 344 keV photopeak of the¹⁵²Eu radiotracer used. The concentrations of Sm and Dy were measured by irradiating one mL portions of the organic extract and analyzing the 104 and 108 keV photopeaks of the short-lived neutron activation products,¹⁵⁵Sm and^165mDy, respectively. Quantitative extraction of Eu with 5×10^–2 M HA alone was obtained in the pH range of 6.7–7.8 with n-butanol, 7.4–8.5 with chloroform, 8.0–8.7 with ethyl acetate, 7.7–8.5 with isoamyl alcohol and 6.1–8.0 with methyl isobutyl ketone (MIBK). But, Eu was extracted only to a maximum of 78% and 83% in the pH range of 8.3–8.9 and 7.4–8.1 with carbon tetrachloride and xylene, respectively. The extraction of Sm and Dy were found quantitative in the pH range of 6.3–7.0 and 6.6–7.1, respectively, with 5×10^–2 M HA alone in MIBK solutions. The synergistic extraction of Eu was quantitative in the pH range of 6.6–9.8 with chloroform, 7.8–8.9 with ethyl acetate, 7.7–8.5 with isoamyl alcohol and 6.0–9.6 with MIBK when 1×10^–2 M each of HA and Phen were employed. Sm and Dy were quantitatively extracted into MIBK solutions containing 5×10^–2 M each of HA and Phen in the pH range 6.0–7.5 and 6.1–7.5, respectively. The distribution ratios of these lanthanides (Ln) were determined as a function of pH, and HA and Phen concentrations. The analysis of the data suggests that these Ln are extracted as LnA₃ chelates when HA alone is used. In the presence of HA and Phen, both LnA₃(Phen) and LnA₃(Phen)₂ adducts are formed only in the MIBK system while LnA₃(Phen) complexes are the predominant ones in all other solvent systems studied. The extraction constants and the adduct formation constants of these complexes have been calculated.     

Schnelle coulometrische Mikrobestimmung einzelner Polythionate

Zusammenfassung Das neue Mikrobestimmungsverfahren beruht auf der coulometrischen Titration von S₂O₃ ^2– nach vorheriger Abbaureaktion der Polythionate mit Sulfit bzw. Cyanid. Es werden 10 ml Probelösung (S₄O₆ ^2–: 5 · 10^–5 bis 1 · 10^–3 M; S₅O₆ ^2–; 2,5 · 10^–5 bis 1· 10^–3 M; S₆O₆ ^2–: 1,66 · 10^–5 bis 1 · 10^–3 M) benötigt. Die Titrationskurve wird von einem Schreiber registriert. Die Reproduzierbarkeit der jeweiligen Einzelbestimmung liegt bei VK _p±0,1 bis ± 1,6%.

---

Rapid coulometric microdetermination of individual polythionates

The method described is based on the coulometric titration of S₂O₃ ^2– after a preceding degradation of the polythionates with sulphite or cyanide. 10 ml of sample solution are required (S₄O₆ ^2–: 5× 10^–5 to 1×10^–3 M; S₅O₆ ^2– : 2.5×10^–5 to 1×10^–3 M; S₆O₆ ^2–: 1.66×10^–5 to 1×10^–3 M). The titration curve is recorded. The reproducibility of a single determination is VK _p±0.1 to ± 1.6%.

     

New effective and selective extractants for separation and determination of silver

Summary Isopropyl-N-alkylthiocarbamates have been studied as extractants for preconcentration of silver trace amounts and for separation of silver macroquantities. It has been shown that the 0.05M reagents in chloroform extract trace amounts of silver with high distribution coefficients from HNO₃, H₂SO₄, HClO₄ and HCl solutions in wide range of their concentrations. The highest selectivity is obtained when HNO₃, H₂SO₄ or HClO₄ solutions are used. Besides silver only mercury and palladium are extracted. When HC1 solutions are used, gold is also transferred into organic phase. Isopropyl-N-alkylthiocarbamates are effective for extraction of silver from its concentrated (up to 1M) solutions, particularly from HNO₃ solutions: more than 99.9% of silver is extracted even at 2-fold reagent excess. Some characteristics of reagents themselfes have been investigated, such as dissociation, protonation, distribution between organic and aqueous phases and association in organic solvents. The thion forms are found to be predominant. Silver is extracted as coordination solvated compounds Ag(HL) _n X, where X=Cl, Br, J, NO₃. Sulfur serves as a donor atom for their formation.The procedures for silver determination in geological samples by flame atomic absorption (3×10^–7%) and atomic emission (1×10^–7%) have been developed. The procedures for atomic emission determination of 23 trace elements (5×10^–8–1×10^–5%) and for electrothermal atomic absorption determination of 17 trace elements (4×10^–9–8×10^–6%) in high purity silver have also been developed.

---

Neue wirksame und selektive Extraktionsmittel für die Trennung und Bestimmung von Silber

Zusammenfassung Isopropyl-N-alkylthiocarbamate wurden als Extraktionsmittel für die Anreicherung von Silberspuren und für die Abtrennung von Makromengen Silber geprüft. Es ergab sich, daß solche 0,05M, in Chloroform gelöste Reagenzien Silberspuren mit hohen Verteilungskoeffizienten aus HNO₃, H₂SO₄, HClO₄ und HCl extrahieren. Die beste Selektivität wurde mit HNO₃, H₂SO₄ oder HClO₄erzielt. Neben Silber werden nur Quecksilber und Palladium extrahiert. Verwendet man HCl, so geht auch Gold in die organische Phase. Isopropyl-N-alkylthiocarbamate eignen sich für die Extraktion von Silber aus konzentrierten (bis zu 1M) Lösungen, besonders aus HNO₃: mehr als 99,9% Silber werden mit zweifachem Reagensüberschuß extrahiert. Einige charakteristische Eigenschaften der in Rede stehenden Reagenzien wurden untersucht: z. B. die Dissoziation, die Protonation, die Verteilung zwischen organischer und wäßriger Phase und die Assoziation in organischen Lösungsmitteln. Hauptsächlich liegen diese Reagenzien in Thionform vor. Silber wird als Ag(HL) _n X extrahiert, worin X für Cl, Br, J oder NO₃ steht. Schwefel fungiert als Donatoratom für deren Bildung.Verfahren zur Silberbestimmung in geologischen Proben mit Hilfe der Flammen-Atomabsorption (3×10^–7%) bzw. der atomaren Emission (l×10^–7) wurden ausgearbeitet. Außerdem wurden auch Verfahren zur Bestimmung von 23 Spurenelementen mittels atomarer Emission (5×10^–8 bis 1×10^–5%) und von 17 Spurenelementen mittels elektrothermaler Atomabsorption (4×10^–9 bis 8×10^–6%) in hochgereinigtem Silber entwickelt.

---

---

The paper has been presented at the Fifth European Conference on Analytical Chemistry (Euroanalysis V), Cracow, August 26–31, 1984.     

Neutron activation analysis of PbxSn1-xTe using extraction chromatography

A simple procedure of neutron activation analysis for the determination of 16 impurities in Pb_xSn_1–xTe with detection limits from 1×10^–4% for Ni and Zr to 2×10^–9% for Sc has been developed. The procedure is based on extraction chromatographic separation of impurities from the irradiated sample.     

Polarographic behaviour of 2-benzilidenimino-benzohydroxamic acid (2-BIBH) and 2-BIBH-Mo(VI) system

The polarographic behaviour of 2-benzilideniminobenzohydroxamic acid (2-BIBH) solutions and of 2-BIBH solutions in the presence of Mo(VI) have been studied by using differential pulse polarography and cyclic voltammetry. The polarographic characteristics of the resulting waves have been studied and possible mechanisms of the processes involved have been proposed. A linear relationship has been observed betweenI _p and Mo(VI) concentration in the range 2×10^–6 to 1.6×10^–5 M when using 3×10^–4 M 2-BIBH. Standard deviations of 5.6×10^–8 and 1.2×10^–8 M were found for 3×10^–6 and 8 × 10^–6 M Mo(VI), respectively.     

Spectrophotometric determination of anionic surfactants in tap and river waters with 1-(10-bromodecyl)-4-(4-aminonaphthylazo)-pyrimidinium bromide

Summary A new cationic dye, 1-(10-bromodecyl)-4-(4-aminonaphthylazo)-pyridinium bromide, was synthesized and evaluated as a new reagent for the determination of anionic surfactants. The reagent reacts with anionic surfactants, such as sodium dodecylsulphate and sodium dodecylbenzenesulphonate, to produce an ion associate in an aqueous medium. The colour change occurs simultaneously, and the colour development is very stable. This makes it possible to determine anionic surfactants directly by spectrophotometry without solvent extraction. The stoichiometric ratio of the ion associate was found to be 1:1 by the mole ratio method. The calibration graph was linear up to 2.5×10^–6 mol/l. The apparent molar absorptivity of the ion associate was 5.3×10⁴ l mol^–1 cm^–1 (at 595 nm). The relative standard deviation (n=10) for 1.2×10^–6 mol/l sodium dodecylsulphate was 4.9%. The proposed method was applied to the determination of anionic surfactants in tap and river waters.     

Determination of cerium in rare earth ores by fluorescence quenching of rhodamine 6G

A fluorescence quenching method has been developed to determine cerium with rhodamine 6G. The method is based on the oxidation of rhodamine 6G by cerium(IV) in sulfuric acid solution. The linear calibration range is 4.0 × 10^–7 -1.6 × 10^–6mol/L. The detection limit is 1.0 × 10^–7 mol/L. The relative standard deviation was 1.0% (n = 5). The method has been used to determine cerium in rare earth ores, with satisfactory results. The method offers the advantages of simplisity, sensitivity and selectivity.     

Polarographic study of a benzodiazepinooxazole: Oxazolam

Summary The polarographic behaviour of 10-chloro-2,3, 7,11b-tetrahydro-2-methyl-11b-phenyloxazolo-[3,2-d][1,4]-benzodiazepin-6(5H)-one (Oxazolam) was studied in the pH range 1–12. The reduction processes of Oxazolam and its hydrolysis product are irreversible and their currents are predominantly diffusion-controlled. The linear relationship between current and Oxazolam concentration in sulphuric acid medium permits its polarographic determination up to 6.08×10^–5 mol/l. The detection limit was 1.52×10^–7 mol/l (50 ppb). The reproducibility of the method in terms of relative standard deviation was 1.74% and 1.85% for ten determinations at 1.48×10^–5 mol/l and 1.37×10^–6 mol/l levels, respectively. The method developed was applied to the determination of the compound in its formulations, Hializan-10 mg, obtaining errors lower than 2%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Oxazolam

     

Amperometric and spectrophotometric determination of carbaryl in natural waters and commercial formulations

The work presented describes the development and evaluation of two flow-injection analysis (FIA) systems for the automated determination of carbaryl in spiked natural waters and commercial formulations. Samples are injected directly into the system where they are subjected to alkaline hydrolysis thus forming 1-naphthol. This product is readily oxidised at a glassy carbon electrode. The electrochemical behaviour of 1-naphthol allows the development of an FIA system with an amperometric detector in which 1-naphthol determination, and thus measurement of carbaryl concentration, can be performed. Linear response over the range 1.0×10^–7 to 1.0×10^–5 mol L^–1, with a sampling rate of 80 samples h^–1, was recorded. The detection limit was 1.0×10^–8 mol L^–1. Another FIA manifold was constructed but this used a colorimetric detector. The methodology was based on the coupling of 1-naphthol with phenylhydrazine hydrochloride to produce a red complex which has maximum absorbance at 495 nm. The response was linear from 1.0×10^–5 to 1.5×10^–3 mol L^–1 with a detection limit of 1.0×10^–6 mol L^–1. Sample-throughput was about 60 samples h^–1. Validation of the results provided by the two FIA methodologies was performed by comparing them with results from a standard HPLC–UV technique. The relative deviation was <5%. Recovery trials were also carried out and the values obtained ranged from 97.0 to 102.0% for both methods. The repeatability (RSD, %) of 12 consecutive injections of one sample was 0.8% and 1.6% for the amperometric and colorimetric systems, respectively.     

Spectrophotometric determination of micro amounts of tetrathionate via its oxidation with permanganate

The reaction conditions of tetrathionate with permanganate were investigated by varying reaction time, temperature and amounts of sulphuric acid and permanganate. Under the optimal conditions for the reaction of tetrathionate with permanganate, both penta- and hexathionate were also oxidised; each one mol of polythionates (S _x O ₆ ^2– x=4, 5 and 6) reacts with (x–1.5) mol of permanganate. The proposed method is based on the reaction of tetrathionate with a given excess amount of permanganate in a sulphuric acid medium and on the spectrophotometric measurement of the iodine as triiodide formed by the oxidation of iodide with the excess of permanganate. This method could be successfully applied to the determinations of tetrathionate (4 × 10^–7 to 2 × 10^–5 M), pentathionate (3 × 10^–7 to 1.43 × 10^–5 M) and hexathionate (2 × 10^–7 to 1.11 × 10^–5 M), and gave a higher sensitivity than any previous methods without solvent extraction.     

Large-Scale Purification of Water-Soluble Polysaccharides from Flaxseed Mucilage, and Isolation of a New Anionic Polymer

Summary Viscous flaxseed mucilage has previously been described as a mixture of two polysaccharides (acidic and neutral). In this study, we have shown that a combination of ion exchange and size exclusion chromatography enables purification of three distinct polysaccharides. Molecular weight (Mw) analysis, performed by size-exclusion chromatography on line with a multi-angle laser light-scattering detector, revealed that the main polysaccharide (75%) was a neutral polymer with a Mw of approximately 1.2 × 10⁶ g mol^–1. The two others were acidic polysaccharides denoted AF₁ (3.75%, 6.5 × 10⁵ g mol^–1) and AF₂ (21.25%, 1.7 × 10⁴ g mol^–1).Presented at: International Symposium on Separation and Characterization of Natural and Synthetic Macromolecules, Amsterdam, The Netherlands, February 5–7, 2003     

Determination of pipemidic acid based on flow-injection chemiluminescence due to energy transfer from peroxynitrous acid synthesized on-line

A flow-injection chemiluminescence (CL) method for the determination of pipemidic acid is described. It is based on energy transfer from excited state peroxynitrous acid to pipemidic acid, in which the excited state peroxynitrous acid is synthesized on-line by the mixing of acid hydrogen peroxide with nitrite in a flow system and the CL is from two excited states of pipemidic acid. The proposed method allows the measurement of pipemidic acid over the range of 2.0×10^–7–2.0×10^–5 mol l^–1 . The detection limit is 6.3×10^–8 mol l^–1, and the relative standard deviation for 2.0×10^–6 mol l^–1 pipemidic acid (n= 9) is 0.9%. This method was evaluated by the analysis of pipemidic acid in pharmaceutical preparations.     

Extraction by reversed micelles of triton N-42 for the spectrophotometric determination of cetyltrimethylammonium bromide

Micellar preconcentration of 1 : 2 associates of Bromophenol Blue with cetyltrimethylammonium bromide is proposed to improve the procedure for the spectrophotometric determination of cationic surfactants. The preconcentration procedure involves quantitative extraction by reversed micelles of Triton N-42 in decane followed by the decomposition of the micellar solution with chloroform. The loss of 10^–7–10^–5 M cetyltrimethylammonium bromide in 5–100-fold preconcentration was not supported by the added-found method (RSD = 3–5%). The determination limit for cetyltrimethylammonium bromide is 2 × 10^–7 M.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 17–21.Original Russian Text Copyright © 2005 by Demidova, Bulavchenko.     

Preconcentration and separation of silver from neutron poisons and rare earths using diphenyl-2-pyridylmethane as an extractant

The extraction of silver from aqueous thiocyanate-perchlorate solutions using diphenyl-2-pyridylmethane (DPPM) in benzene has been investigated. The variables such as concentrations of perchloric acid, thiocyanate and DPPM influencing the extraction have been optimized. Maximum extraction has been achieved from 0.01 M perchloric acid solution containing 0.01 M potassium thiocyanate in 0.075 M DPPM in benzene. The extraction was found to be independent of silver concentration in the range from 10^–4–10^–6 M. The influence of several anions on the extraction was examined; only thiosulphate interfered seriously and reduced the extraction below 1%. Thus 0.1M potassium thiosulphate was found to back-extract silver quantitatively in one step. Under selected optimal conditions, very small extraction (<1%) was observed for trivalent Gd, Dy, Ho, Tm, Yb, Lu; Cs(I) and Cd(II) and separation factors for these elements were better than 10³. Only Sn(IV) exhibited quantitative extraction (>99%). This extraction procedure can be used for the preconcentration of silver and tin or their separation from rare earths mentioned above.     

Voltammetric Determination of Rubeanic Acid

Procedures for the voltammetric determination of rubeanic acid (RA) at a mercury-film electrode were proposed. They are based on the oxidation of RA at –0.70 to –0.80 V or on the reduction of mercury sulfide, the product of RA oxidation, at –0.82 to –0.85 V (versus a saturated silver–silver chloride electrode) in a 1 M NaOH solution. The oxidation and reduction currents are linear functions of RA concentration in the ranges from 9 × 10^–6 to 3 × 10^–4 M and from 5 × 10^–6 to 3 × 10^–4 M, respectively.