闪蒸气相色谱法应用于天然纤维与助燃剂混合燃烧残留物的分析

应用闪蒸气相色谱法对2种火场中常见的天然纤维载体(木材和棉布)与汽油(或柴油)的混合燃烧残留物进行分析。在模拟火场条件下,分别制得2种载体与汽油或柴油混合燃烧的残留物。根据燃烧残留物热重分析结果选择闪蒸温度为300℃。分析对象为上述2种载体分别在无助燃剂和有助燃剂条件下共同燃烧得到的残渣,分别在完全燃烧后0,24,72h进行取样。结果表明:闪蒸气相色谱技术可从混合燃烧残留物中检测到助燃剂的特征组分,能够满足助燃剂检测鉴定的要求。随着取样时间的延长,助燃剂发生挥发,残留特征组分减少。棉布载体燃烧残留物比木材载体燃烧残留物对助燃剂特征组分的保留效果更好。柴油燃烧产物特征组分较汽油特征组分保留时间更长。     

典型塑料载体与助燃剂燃烧残留物的闪蒸气相色谱-质谱分析

通过对火场常见塑料载体与助燃剂混合燃烧残留物的分析,发展一种适用此类燃烧残留物的火灾物证鉴定方法,对火场中是否存在助燃剂进行判断,避免漏检情况的发生。应用热分析技术确定合适的闪蒸温度,在此温度下对塑料载体与助燃剂混合燃烧残留物进行闪蒸分析,并从实验条件选择、可行性分析、定性分析三方面对闪蒸技术进行评价。结果表明,闪蒸气相色谱-质谱（Flash GC-MS）技术可以检测到热塑性聚合物塑料载体与助燃剂混合燃烧残留物中残留的助燃剂特征组分,可对火场中是否存在过助燃剂进行辨别。闪蒸气相色谱-质谱技术丰富了现代火灾物证鉴定技术,能进一步辅助火灾物证鉴定工作,使鉴定结论更准确、可靠。     

裂解气相色谱-质谱分析火场残留物中助燃剂

通过对火灾现场助燃剂及其燃烧残留物进行分析，开展了基于裂解气相色谱-质谱法（PyGC-MS）的火场助燃剂分析方法。选取了汽油和柴油2种助燃剂以及棉布和聚对苯二甲酸乙二醇酯（PET）塑料2类载体，制备了助燃剂与载体的混合燃烧残留物。利用热分析技术确定样品的特征性温度，并对分析条件进行优化与选择。通过闪蒸分析和裂解分析的分步裂解方法，对样品进行了PyGC-MS分析。实验结果表明，PET载体原样燃烧残留物的裂解产物共有35个组分，而PET载体与汽油混合燃烧残留物和PET载体与柴油混合燃烧残留物的裂解产物只有25个组分，且各裂解产物的种类和含量均不相同。该法可对同一载体的自身燃烧残留物和与助燃剂混合燃烧残留物进行区分，适用于火灾残留物中助燃剂的分析，可对火场中是否存在助燃剂进行判别，为火灾性质的判断和火灾调查工作提供科学依据。     

热脱附气相色谱-质谱法快速分析助燃剂成分

建立了热脱附技术对火灾残留物中的助燃剂进行富集、浓缩后经气-质联用仪(GC-MS)分析的方法,并通过自动质谱去卷积定性系统对助燃剂谱库进行检索,汽油、柴油检测限分别为0.58 pl/mL和1.23 pl/mL.该方法简便、快速、准确.     

固相微萃取技术在法庭科学领域中的应用

综述国内外固相微萃取技术在法庭科学领域中毒物、毒品和微量物证(炸药残留物、助燃剂残留物、人体气味)样品前处理及分析中的应用,以及在火场助燃剂残留物及人体气味鉴别方面的应用;对固相微萃取技术在法庭科学领域中的发展方向进行了展望。可以对法庭科学领域毒物毒品、微量物的相关研究和侦查办案提供参考。     

Box-Behnken试验设计在优化碳基渗滤膜提取助燃剂残留物中的应用

根据Box-Behnken试验设计原理,采用响应面法优化碳基渗滤膜提取助燃剂残留物的条件,考察温度、时间和真空度对提取率的影响。结果显示:最佳提取条件温度54℃,时间35 min,真空度0.02MPa。在此条件下,助燃剂中代表性组份正庚烷、甲苯、二甲苯提取率分别为64.4%、71.9%、78.9%。方法已用于纵火现场助燃剂残留物的提取检验。     

Fisher判别在气相色谱-质谱分析助燃剂燃烧残留物中的应用

为寻找一种用于火场助燃剂燃烧残留物鉴定的更为准确、有效的模式识别方法,对7种常见助燃剂在不同载体上的燃烧残留物样品及未知送检样品进行气相色谱-质谱（GC-MS）分析测试,通过特征组分分析鉴定出未知样品中含有汽油成分。同时运用Fisher判别及PCA（主成分分析）/Fisher判别联用两种判别方法对样本数据进行了分析处理,PCA/Fisher判别联用的结果表明送检样本中含有硝基油漆稀料成分,而仅使用Fisher判别的结果表明送检样本中含有93^#汽油。通过将两种分析方法所得结果与GC-MS特征组分分析的结果进行比对发现,Fisher判别能够对7种助燃剂燃烧残留物的样本实现更有效的分类,对未知样本的判别更为有效。该研究结果为火场助燃剂鉴定提供了新的数据分析手段。     

裂解气相色谱法分析火场燃烧残留物的研究

采用裂解气相色谱法对四种不同木材原样及分别浸渍汽油和柴油的木材燃烧残留物进行了分析研究，结果表明，无论是不同种类的木材还是含有不同助燃剂的同种木材，其燃烧残留物的裂解色谱图都存在明显的差异，通过对火灾现场燃烧残留物裂解色谱分析，可以确定载体木材的种类及木材中是否浸渍过助燃剂汽油或柴油，从而为火灾原因调查中纵火案件的侦破和诉讼提供科学的依据和证据。     

火场PE、PVC检材助燃剂检测的研究

近年来汽油纵火案件逐年增多,国内外对助燃剂的检测也在不断发展~([1～4]).汽油残留物是案件定性和展开调查的重要依据,汽油易挥发、易燃烧,现代家庭高聚物较多,燃烧后成分复杂对检测造成很大干扰.     

汽油燃烧残留物标准样品制备及特征组分研究

汽油燃烧残留物的检测往往是纵火案件侦破的关键,对鉴定机构的检验(鉴定)能力有很高的要求。汽油燃烧残留物的鉴定需要已知样品进行比对分析,但目前还没有相应的标准样品可以提供。因此,建立汽油燃烧残留物标准样品有助于对鉴定机构相应的鉴定能力进行培养和考察。本研究以石英砂为燃烧载体,93号汽油为助燃剂,制备汽油燃烧残留物标准样品,对比研究了溶剂法和直接顶空进样法对汽油燃烧残留物的提取效果。气相色谱-质谱法的分析结果表明,汽油在燃烧前后的特征组分存在明显差异,不同的提取方法对检测结果有一定影响,但是特征组分的变化趋势是一致的,取代的芳烃和稠环芳烃等特征组分的鉴别和含量的相对大小可以作为汽油燃烧残留物鉴定的重要判定依据。     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

常温常压下吡咯及其衍生物的镍催化加氢反应考察

为进一步研究常温常压下吡咯及其衍生物的镍催化加氢反应,我们对试剂吡咯、吡咯烷和吡咯烷酮做了相应的催化加氢实验。并采用电镜（TEM-HREM）、X射线衍射（XRD）对Ni基催化剂的形貌、结构、加氢活性和超声波对其影响进行了检测,同时还用紫外吸收光谱、气相色谱等对加氢产物进行了分析考察。结果表明超声波能促进镍基催化剂活性,使镍微晶(111)晶面间距增大1.5%、并保持高分散态。常温常压下纳米镍基催化剂对吡咯、吡咯烷和吡咯烷酮的加氢反应显示一定的催化活性;吡咯加氢首先生成吡咯烷,进而使环打开生成低碳烃、氨等产物,总反应为零级,符合表面接触反应特征。     

电流变液中悬浮颗粒的体积与形状的变化

基于偶极近似,运用电极化方法,定量研究了电流变液中悬浮颗粒在外电场作用下其体积和形状的变化,并计算了其体积和形状的相对变化率.研究结果表明:悬浮颗粒的体积和形状的相对变化率均与电场强度的平方成正比,并与ER本身的性质有关.一般情况下,颗粒的体积和形状的相对变化率分别为8.4%和12.5%,对总体积变化率的贡献为1.68%.这种变化对于ER系统的电涨和电热都作出了贡献,仅当将颗粒当作刚性球时,其自由能才与电场强度的平方成正比.     

纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

Molecular interactions of plant and algal polysaccharides

This article presents an overview of the interaction in solution of certain plant and algal polysaccharides with cations and also of their interaction in admixture with other polysaccharides and proteins. The mechanism of gelation of pectin and alginate in the presence of calcium ions is discussed together with the specific binding of potassium ions to kappa carrageenan and its influence on the coil–helix transition. The associative and segregative phase behaviour that is encountered in aqueous solutions of mixed polysaccharide systems is considered together with the formation of the soluble and insoluble complexes in mixtures of polysaccharides and proteins.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

多弧离子镀TiN与不同金属基材间的接触界面与表面特性

用多弧离子镀技术在不同金属基材上进行TiN镀膜实验,制备了TiN/Fe、 TiN/Cu和TiN/Cr/Cu复合膜.借助扫描电子显微镜(SEM)、 X射线衍射仪(XRD)和光电子能谱(XPS),研究了TiN与Fe、 Cu和Cr/Cu三种不同衬底接触界面的形貌、结构及其表面特性.SEM观察发现,在一定离子镀膜条件下, TiN涂层可与Fe、 Cu和Cr/Cu金属基材形成均匀平整的接触界面,在铜基上TiN界面清晰,在Fe与Cr/Cu界面有明显的层状晶界微结晶分布.XRD分析显示, Fe、 Cu和Cr/Cu表面生成的薄膜都包含TiN、 Ti2N等多晶相,在Cr/Cu界面还包含Ti-Cr的金属间化合物.XPS结果表明,表面除了TiN膜外,还生成TiO2和TiOxNy等氧化膜.Ar+刻蚀5 min后, TiO2消失, TiOxNy减少, TiN则呈增加趋势.TiN与Cr/Cu界面形成明显的Ti-Cr和Cr-Ni互扩散层,这有助于增强薄膜附着力,形成较牢固的TiN涂层.