Synthesis and properties of novel aromatic poly(ester amide)s derived from 1,5-bis(4-aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene ring-containing bis(ester amine), 1,5-bis(4-aminobenzoyloxy)naphthalene (2), was synthesized from the condensation of 1,5-dihydroxynaphthalene with 4-nitrobenzoyl chloride followed by catalytic hydrogenation. A series of naphthalene-containing poly(ester amide)s having inherent viscosities of 0.34-0.82 dl/g were prepared by the direct phosphorylation polyamidation from bis(ester amine) 2 with various aromatic dicarboxylic acids. The poly(ester amide)s derived from terephthalic acid, 4,4′-biphenyldicarboxylic acid, 2,6-naphthalenedicarboxylic acid, and 4,4′-oxydibenzoic acid were semicrystalline and showed less solubility. The other polymers were amorphous and readily soluble in polar organic solvents and gave flexible and tough films via solution casting. Except for four examples, the poly(ester amide)s displayed discernible glass transitions between 190 and 227 °C by differential scanning calorimetry. These poly(ester amide)s did not show significant decomposition below 400 °C in nitrogen or air.     

Silver nitrate molecular species and coordination polymers with divergent supramolecular morphology constructed from hydrogen-bonding capable dipyridyl ligands

Solution phase reaction of silver nitrate with various hydrogen-bonding capable dipyridyl ligands has resulted in three 1-D coordination polymers and one discrete cationic species with diverse silver coordination spheres. [Ag(NO₃)(4,4′-dpk)]_n (1, 4,4′-dpk = 4,4′-dipyridylketone), {[Ag(4-bpmp)](NO₃) · 6H₂O} (2, 4-bpmp = bis(4-pyridylmethyl)piperazine) and {[Ag₂(NO₃)(3-bpmp)(H₂O)₂]NO₃}_n (3, 3-bpmp = bis(3-pyridylmethyl)piperazine) all display 1-D coordination polymer chain or ribbon motifs. Long-range Ag?O interactions and/or hydrogen-bonding promote the formation of different supramolecular aggregations such as a 2-D double layer slab in 1, a threefold interpenetrated 3-D diamondoid network in 2, and a 2-D single layer in 3. Compound 2 manifests “infinite” 1-D T(5)2 water molecule tapes within its incipient voids. {[Ag(2,4′-pmpp)₂](NO₃) · H₂O} (4, 2,4′-pmpp = 2-pyridyl(4′-methylpyridyl)piperazine) contains discrete cationic species connected by nitrate-mediated Ag?O interactions into a supramolecular 1-D zig-zag chain. Complexes 1 and 4 undergo weak blue–violet luminescence upon irradiation with ultraviolet light.     

Synthesis of substituted 1,1′-diaminoferrocenes from cyclo-2-pentene imines

Condensation of anilines and primary aliphatic amines with 3,4-diphenylcyclo-2-pentenone leads to the corresponding diphenylcyclopentene imines in good yields of 72-90%. Deprotonation of these aminocyclopentadiene tautomers and reaction with FeCl₂ leads to the synthesis of the respective 1,1′-diamino-3,3′,4,4′-tetraphenylferrocenes. Yields increase from 33% to 65% with a decrease in the steric bulk of the amine substituent. The observation that a successful conversion requires two equivalents of base is conceived on the basis of the discussed reaction mechanism. The molecular structure of 1,1′-dianilino-3,3′,4,4′-tetraphenylferrocene (3a), which was determined by single crystal X-ray analysis reveals a trans coordination of the two amine moieties with respect to the central Cp-Fe-Cp axis of the ferrocenyl backbone.     

Host size effect in the complexation of two bis(m-phenylene)-32-crown-10-based cryptands with a diazapyrenium salt

N,N′-Dimethyl-2,7-diazapyrenium bis(hexafluorophosphate) binds a C₃-symmetric bis(m-phenylene)-32-crown-10-based cryptand more strongly than N,N′-dimethyl-4,4′-bipyridinium bis(hexafluorophosphate) partly because of its better fit in size with the cryptand host cavity, while it binds a relatively smaller pyridyl cryptand less strongly due to its worse fit in size with the cryptand host cavity and the lack of hydrogen bonding to the pyridyl nitrogen atom of the host.     

Synthesis and characterization of poly(thioether ether sulfone imide)s derived from isomeric bis(chlorophthalimide)s and bis(4-mercaptophenyl) sulfone

A series of isomeric bis(chlorophthalimide)s (BCPIs) were conveniently prepared from 3-chlorophthalic anhydride, 4-chlorophthalic anhydride, and mixtures thereof. Polymerization of BCPIs with bis(4-mercaptophenyl) sulfone (BMPS) proceeded smoothly in the presence of tributylamine, from which a class of isomeric poly(thioether ether sulfone imide)s (PTESIs) with inherent viscosities of 0.45-0.82 dL/g were obtained. The solubility, thermal stability, and mechanical properties of these polymers were characterized. Compared to the PTESIs derived from single BCPIs, i.e., 3,3′-, 3,4′-, or 4,4′-BCPIs, the PTESIs derived from mixed BCPIs showed better solubility and higher storage modulus. These PTESIs also demonstrated good thermal stability, giving only 5% weight loss at temperature of 490 °C in nitrogen atmosphere. The glass transition temperatures (T_gs) of these isomeric PTESIs were between 242 and 265 °C, and were increased with increasing of the ratio of 3-chlorophthalimide unit in the polymer backbone.     

Effect of structure on thermal behaviour of epoxy resins

The paper deals with the curing behaviour of diglycidyl ether of bisphenol-A (DGEBA) using three novel multifunctional aromatic amines having phosphine oxide and amide-acid linkages. The amines were prepared by reacting tris(3-aminophenyl)phosphine oxide (TAP) with 1,2,4,5-benzenetetracarboxylic acid anhydride (P)/4,4^′-(hexafluoroisopropylidene)diphthalic acid anhydride (F)/3,3^′,4,4^′-benzophenonetetracarboxylic acid dianhydride (B). Amide-acid linkage in these amines is converted to thermally stable imide linkage during curing reaction. Curing temperatures of DGEBA were higher with phosphorylated amines than the conventional amine 4,4^′-diamino diphenyl sulphone (D). A decrease in initial decomposition temperature and higher char yields were observed when phosphorus containing amide-acid amines were used as curing agents for DGEBA.     

Un-catalyzed tandem Knoevenagel–Michael reaction for the synthesis of 4,4′-(arylmethylene)bis(1H-pyrazol-5-ols) in aqueous medium

An environmentally benign un-catalyzed one-pot synthesis of 4,4′-(arylmethylene)bis(1H-pyrazol-5-ols) has been reported via tandem Knoevenagel–Michael reaction of aldehydes with two equivalents of 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one in aqueous medium.     

Silyl-enolization-asymmetric Claisen rearrangement of 2-allyloxyindolin-3-one: enantioselective total synthesis of 3a-hydroxypyrrolo[2,3-b]indoline alkaloid alline

Asymmetric Claisen rearrangement triggered by silyl-enolization of 2-(1′-nonel-3′-yloxy)indolin-3-ones was performed in order to prepare 3-(2′-nonenyl)-3-hydroxyindolin-2-ones. Total synthesis of 3-hydroxypyrrolo[2,3-b]indoline alkaloid, (+)-alline was achieved by transformation of the allylic moiety of 3-(2′-nonenyl)-3-hydroxyindolin-2-one to amine followed by reductive cyclization.     

含亚甲基和双二氮杂萘酮结构的聚芳酮的合成与性能

聚芳醚酮是一类重要的具有优异综合性能的工程塑料 ,它具有高的热稳定性、尺寸稳定性、耐溶剂性、好的加工性能和电性能 ,因而它经常作为复合材料的基质、粘合剂等被广泛的应用于航空、航天和电子等领域 .近几十年来 ,人们付出了很大的努力去开发聚芳醚酮新品种[1,2 ] .本研究组以 4 (4′ 羟基苯氧基 ) 2 ,3 二氮杂萘 1 (2Ｈ) 酮为缩聚单体制备了一系列的性能优良的聚芳醚酮[3～ 6] ,在主链中引入高密度的氮杂萘酮结构是获得高热稳定性和良好溶解性的重要途径 .由单体中含有更多的氮杂萘酮结构获得可溶解且耐温等级更高的聚芳酮是人们期…     

Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. II. Synthesis and characterization of segmented polyurethanes from HDI and MDI

Various new thermoplastic segmented polyurethanes were synthesized by a one-step melt polymerization from aliphatic-aromatic α,ω-diols containing sulfur in the aliphatic chain, including 4,4′-(ethane-1,2-diyl)bis(benzenethioethanol), 4,4′-(ethane-1,2-diyl)bis(benzenethiopropanol) and 4,4′-(ethane-1,2-diyl)bis(benzenethiodecanol) as chain extenders, hexane-1,6-diyl diisocyanate (HDI) or 4,4′-diphenylmethane diisocyanate (MDI) and 20-80 mol% poly(oxytetramethylene)diol (PTMO) with molecular weight of 1000 g/mol as a soft segment. The reaction was conducted at the molar ratio of NCO/OH = 1 and 1.05, and in the case of the HDI-based polyurethanes in the presence of dibutyltin dilaurate as a catalyst. The effect of the diisocyanate used on the structure and some physicochemical, thermal and mechanical properties of the segmented polyurethanes were studied. The structures of these polyurethanes were examined by FTIR and X-ray diffraction analysis. The thermal properties were investigated by differential scanning calorimetry and thermogravimetric analysis. Shore hardness and tensile properties were also determined. All the synthesized polymers showed partially crystalline structures. The MDI-based polyurethanes were products with lower crystallinity, higher glass-transition temperature (T_g) and better thermal stability in comparison with the HDI-based ones. The MDI series polymers also exhibited higher tensile strength (up to ∼36 MPa vs. ∼23 MPa) and elongation at break (up to ∼3900% vs. ∼900%), but lower hardness than the analogous HDI series polyurethanes. In both series of the polymers an increase in PTMO soft-segment content was associated with decreased crystallinity, T_g, hardness and tensile strength. An increase in PTMO content also involved an increase in elongation at break.     

Synthesis, characterization and photocrosslinking properties of polyacrylamides having bromo substituted pendant cinnamoyl moieties

New 3- and 4-bromocinnamoyl aniline were synthesized condensing 4-aminoacetophenone and the respective bromobenzaldehydes in the presence of sodium hydroxide. The monomers, 4-(3′-bromocinnamoyl) phenyl acrylamide (4,3′-BCPA) and 4-(4′-bromocinnamoyl) phenyl acrylamide (4,4′-BCPA) were prepared by reacting the respective chalcones and acryloyl chloride in the presence of triethylamine at 0-5 °C. Homopolymers of 4,3′-BCPA and 4,4′-BCPA was carried out in methyl ethyl ketone using benzoyl peroxide (BPO) under nitrogen atmosphere at 70 °C. The prepared polymers were characterized by UV, IR, ¹H-NMR and ¹³C-NMR techniques. The molecular weights (M_w and M_n) of the polymers were determined by gel permeation chromatography. The thermogravimetric analysis (TGA) of the polymers in nitrogen atmosphere reveals that they possess very good thermal stability required of a negative type photoresist. The glass transition temperature of poly(4,3′-BCPA) and poly (4,4′-BCPA) were found to be 55 and 64 °C respectively. The solubility of the polymers was tested in various polar and non-polar solvents. Photocrosslinking nature of the polymer samples was carried out in the presence and absence of various triplet photosensitizers in solution phase using chloroform solvent under medium frequency UV light. For using the polymers as negative photoresist materials the rate of photocrosslinking of the polymers was measured under the influence of different solvents, concentrations and position of the substituent.     

Synthesis and characterization of some new Schiff base polymers

Seven Schiff base polymers poly 5,5^′-methylenebis(2-hydroxyacetophenone)semicarbazone (PHASC), poly-5,5^′-methylenebis(2-hydroxyacetophenone)thiosemicarbazone (PHATS), poly 6,6^′-methylenebis(2-hydroxynaphthaldehyde)1,2-propylenediimine (PHNPn), poly 6,6^′-methylenebis (2-hydroxynaphthaldehyde)1,3-propylenediimine (PHNPR), poly 6,6^′-methylenebis (2-hydroxy-naphthaldehyde)thiosemicarbazone (PHNTS), poly 6,6^′-methylenebis(2-hydroxy-naphthaldehyde)urea (PHNU) and poly-6,6^′-methylenebis(2-hydroxynaphthaldehyde)semicarbazone (PHNSC) were prepared by polycondensation of 5,5^′-methylenebis(2-hydroxyacetophenone) (MHA) or 6,6^′-methylenebis(2-hydroxynaphthaldehyde) (MHN) with semicarbazide, thiosemicarbazide, 1,2-propylenediamine, 1,3-propylenediamine or urea. The polymers were characterized by elemental micro-analysis, infrared and ultraviolet spectroscopy and viscosity measurements. The reduced viscosity of the polymers measured in dimethylformamide (DMF) was observed in the range 0.32-0.63 dl/g.     

A 3D porous zinc MOF constructed from a flexible tripodal ligand: Synthesis, structure, and photoluminescence property

A new metal-organic framework, [Zn₅(trencba)₂(OH)₂Cl₂·4H₂O] (1) [H₃trencba=N,N,N′,N′,N′′,N′′-tris[(4-carboxylate-2-yl)methyl]-tris(2-aminoethyl)amine], constructed from a flexible tripodal ligand based on C₃ symmetric tris(2-aminoethyl)amine, has been synthesized hydrothermally and characterized by elemental analysis, IR, TG, XRD and single-crystal X-ray diffraction analysis. Compound 1 contains an unprecedented linear penta-nuclear zinc cluster fragment. Each ligand links four penta-nuclear fragments, and every fragment links eight ligands to generate a three-dimensional non-interpenetrated porous framework. The uncoordinated water molecules were observed trapped in the void pores. Compound 1 represents the first example of (6,8)-connected 3D bi-nodal framework based on a single kind of organic ligand. The photoluminescence measurements showed that complex 1 exhibits relatively stronger blue emissions at room temperature than that of the ligand.     

Unexpected formation of the copper(II) dinuclear mixed-ligand species in the ternary system of N,N,N′,N″,N″-pentamethyldiethylenetriamine with methionine- or histidinehydroxamic acids in aqueous solution

Equilibrium studies of the mixed-ligand complexes of the copper(II) ion with pentamethyldiethylenetriamine (N,N,N′,N″,N″-pentamethyl-[bis(2-aminoethyl)amine], Me₅dien) as a primary ligand and methioninehydroxamic acid (2-amino-4-(methylthio)butanehydroxamic acid, Metha) or histidinehydroxamic acid (2-amino-3-(4′-imidazolyl)propanehydroxamicacid, Hisha) as a secondary ligand L were performed by potentiometric titration, UV–Vis and EPR spectroscopy. The results show that in these ternary systems the dinuclear [Cu₂(Me₅dien)L₂H₋₁]⁺ mixed-ligand species is formed as a predominant one in the basic solution. The monouclear [Cu(Me₅dien)L]⁺ species is formed in low concentration. Our spectroscopic results indicate that the geometry of these mixed-ligand five-coordinate complexes is strongly distorted towards trigonal-bipyramidal.     

Synthesis and characterization of polyamides and poly(amide-imide)s derived from 2,2-bis(4-aminophenoxy) benzonitrile

A series of polyamides and poly(amide-imide)s were prepared by the direct poly-condensation of 2,2-bis(4-aminophenoxy) benzonitrile [4-APBN] with aromatic dicarboxylic acids and bis(carboxyphthalimide)s in N-methyl-2-pyrrolidone [NMP] with triphenyl phosphite and pyridine as condensing agents. The synthesis of 4-APBN involves a nucleophilic displacement reaction in dipolar aprotic solvent with the alkali metal salt of p-aminophenol and an activated aromatic dichloro compound. Bis(carboxyphthalimide)s were prepared by condensation of 4,4^′-diaminodiphenylsulfone, 3,3^′-diaminodiphenylsulfone, 4,4^′-diaminodiphenylether, 4,4^′-diaminodiphenylmethane, 3,3^′-diaminobenzophenone, and trimellitic anhydride at a 1:2 molar ratio. The inherent viscosities of the resulting polymers were found to be in the range of 0.31-0.93 dl/g and glass transition temperatures between 235 and 298 °C. All polymers were soluble in aprotic polar solvents such as dimethylsulfoxide and NMP. The results of thermogravimetry revealed that all the polymers showed no significant weight loss before 400 °C. Wide-angle X-ray diffractograms revealed that all polymers were found to be amorphous except for the polyamide derived from isophthalic acid and polyamide-imides derived from diaminodiphenylether and diaminobenzophenone based bis(carboxyphthalimide)s.     

New C2-symmetry diols accumulating one stereogenic axis and two stereogenic centers

Herein we report a protocol for the enantioselective synthesis of the three stereoisomers of 1,1′-(1,1′-binaphthalene-2,2′-diyl)bis(2,2,2-trifluoroethanol) and their characterization. These compounds, that combine axial and central chirality, might present interesting properties for enantiorecognition. Different reduction processes were applied to racemic and enantiopure 1,1′-(1,1′-binaphthalene-2,2′-diyl)bis(2,2,2-trifluoroethanone) allowing the isolation of the corresponding ketols, 2,2,2-trifluoro-1-[2′-(2,2,2-trifluoro-1-hydroxyethyl)-1,1′-binaphthalen-2-yl]ethanone, and the named diols.     

Spin Crossover in a Family of Iron(II) Complexes with Hexadentate ligands: Ligand Strain as a Factor Determining the Transition Temperature

This paper reports the synthesis of a family of mononuclear complexes [Fe(L)]X₂ (X=BF₄, PF₆, ClO₄) with hexadentate ligands L=Hpy-DAPP ({bis[N-(2-pyridylmethyl)-3-aminopropyl](2-pyridylmethyl)amine}), Hpy-EPPA ({[N-(2-pyridylmethyl)-3-aminopropyl][N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}) and Hpy-DEPA ({bis[N-(2-pyridylmethyl)-2-aminoethyl](2-pyridylmethyl)amine}). The systematic change of the length of amino-aliphatic chains in these ligands results in chelate rings of different size: two six-membered rings for Hpy-DAPP, one five- and one six-membered rings for Hpy-EPPA, and two five-membered rings for Hpy-DEPA. The X-ray analysis of three low-spin complexes [Fe(L)](BF₄)₂ revealed similarities in their molecular and crystal structures. The magnetic measurements have shown that all synthesized complexes display spin-crossover behavior. The spin-transition temperature increases upon the change from six-membered to five-membered chelate rings, clearly demonstrating the role of the ligand strain. This effect does not depend on the nature of the counter ion. We discuss the structural features accountable for the strain effect on the spin-transition temperature.     

Poly(urethaneimides) (PUIs) containing tertiary amine groups as precursors for original PUI cationomers

This paper details the synthesis and characterisation of poly(urethaneimides) (PUIs) containing tertiary amine groups and obtained from a polytetramethylene oxide diol (PTMO1000), N-methyldiethanolamine (MDEA), 4,4′-methylene-bis-phenylisocyanate (MDI) and 4,4′-hexafluoroisopropylidene-bis-phthalic anhydride (6FDA). The polymers PTMO1000 (1 − x equiv.) + MDEA (x equiv.)/MDI (2 equiv.)/6FDA (1 equiv.) were obtained in high yields (>90%) through original synthesis, involving the reaction of macrodiisocyanates with an aromatic dianhydride in two steps only. A wide range of complementary techniques including two-dimensional NMR showed that the new method enabled a very good control of the polymer structure. In particular, the tertiary amine content of the PUI copolymers was easily varied over the whole composition range (x: 0 → 1), with interesting prospects for the design of a wide range of ion-containing poly(urethaneimides) by quaternising the tertiary amine groups. The PUI properties (e.g. solubility, viscosity, film-forming ability, etc.) clearly depended upon their tertiary amine content. Up to a tertiary amine content of x = 0.7 equiv., the very good film-forming character of the PUIs enabled to cast strong films suitable for permeability investigations.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Thermal degradation behaviour of novel wholly para-oriented aromatic polyamide-hydrazides containing sulfone-ether linkages

Thermal stability and degradation behaviour of a series of novel wholly para-oriented aromatic polyamide-hydrazides containing flexibilising sulfone-ether linkages in their main chains have been investigated in nitrogen and in air using differential scanning calorimetry (DSC), thermogravimetry (TG), infrared spectroscopy (IR) and elemental analysis. All of these polymers have similar structural formula except for the presence of sulfone, ether, or sulfone-ether linking groups between appropriate aromatic nuclei in their main chains. The influence of incorporation of these linkages on the thermal stability and degradation behaviour of these polymers has also been studied. The polymers were prepared by a low temperature solution polycondensation reaction of 4-amino-3-hydroxybenzhydrazide (4A3HBH) and an equimolar amount of either 4,4′-sulfonyl dibenzoyl chloride (SDBC), 4,4′-[sulfonyl bis (1,4-phenylene)dioxy] dibenzoyl chloride (SODBC), 4,4′-[sulfonyl bis (2,6-dimethyl- 1,4-phenylene)dioxy] dibenzoyl chloride (4MeSODBC), or 4,4′-(1,4-phenylenedioxy)dibenzoyl chloride (ODBC) in anhydrous N,N-dimethyl acetamide (DMAc) as a solvent at −10 °C. A related polyamide-hydrazide without the flexibilising linkages is also investigated for comparison. It was synthesized from 4A3HBH and terephthaloyl chloride (TCl) by the same synthetic route. The results clearly reveal that these polymers are characterized by high thermal stability. Their weight loss occurred in three distinctive steps. The first was small and was assigned to the evaporation of absorbed moisture. The second was appreciable and was attributed to the cyclodehydration reaction of the o-hydroxy polyamide-hydrazides into the corresponding poly (1,3,4-oxadiazolyl-benzoxazoles) by losing water. This is not a true degradation, but rather a thermo-chemical transformation reaction. The third was relatively severe and sharp, particularly in air, and corresponded to the decomposition of the resulting poly(1,3,4-oxadiazolyl-benzoxazoles). There is a slight shift of the decomposition temperature of these polymers to a lower temperature as the sulfone-ether linkages were introduced into the polymer chains. The decomposition seems to start by breaking the sulfonyl groups as confirmed from DSC measurements. The results also indicate that the incorporation of the flexibilising linkages into the polymer main chains did not seem to significantly influence the thermal stability of these polymers in comparison with that of the polymer free from these linkages.