Si(111)分子束外延生长时RHEED强度振荡的观察

本文报道用反射式高能电子衍射的强度振荡测量来观察Si(111)衬底上分子束外延的生长行为,观察到了双原子层的振荡模式。振荡的衰减和恢复特性不同于Si(100)衬底上的生长行为,而同GaAs分子束外延时的特性非常相似。 关键词：     

m面蓝宝石上ZnO/ZnMgO多量子阱的制备及发光特性研究

利用等离子体辅助分子束外延设备(P-MBE)在m面的蓝宝石(m-Al₂O₃)衬底上制备了ZnO/Zn_0.85Mg_0.15O多量子阱.反射式高能电子衍射谱(RHEED)图样的原位观察表明,多量子阱结构是以二维模式生长的.从光致发光谱中可以看到ZnO/Zn_0.85Mg_0.15O多量子阱在室温仍具有明显的量子限域效应.在290 K时阱宽为3 nm的ZnO/Zn_{0.85关键词： 等离子体辅助分子束外延 ZnO多量子阱 光致发光}     

分子束外延生长Sb薄膜及其量子尺寸效应

在GaAs(001)衬底上，用分子束外延生长Sb(111)薄膜，用反射式高能电子衍射仪原位监控生长过程，用透射电子显微镜观察薄膜结构，并用van der Pauw方法测量了电阻率随生长温度的变化，观察到Sb薄膜半金属/半导体转变及其量子尺寸效应． 关键词：     

反射式高能电子衍射实时监控的分子束外延生长GaAs晶体衬底温度校准及表面相变的研究

以反射式高能电子衍射(RHEED)作为实时监测工具,根据GaAs(100)表面重构相与衬底温度、As₄等效束流压强之间的关系,对分子束外延(MBE)系统中衬底测温系统进行了校准,这种方法也适用于其他的MBE系统.为生长高质量的外延薄膜材料、研究InGaAs表面粗糙化及相变等过程提供了实验依据. 关键词： 分子束外延 反射式高能电子衍射 表面重构 温度校准     

Si衬底上分子束外延Ge,Si时的反射式高能电子衍射强度振荡观察

本文观察了在Si(100)和Si(111)衬底上分子束外延Si,Ge时的反射式高能电子衍射(RHEED)强度振荡现象。其振荡特性表明,外延一定厚度的缓冲层可以改善表面的平整性,较慢的生长速率或中断生长一段时间有利于外延膜晶体质量的提高。Si(100)上外延Si或Ge时,沿[100]和[110]方位观测到的振荡特性均为单原子模式,起因于表面存在双畴(2×1)再构;而Si(111)上外延Ge时,[112]方位观测到的振荡为双原子层模式,但在[110]方位观察到不均匀周期的强度振荡行为。两种衬底上保持RHEED     

用RHEED强度振荡锁相外延控制Ge/Si超晶格的生长

观察了Ge,Ge/Si交替外延时的反射式高能电子衍射(RHEED)强度振荡现象,并由此研究了Si(100)和Si(111)衬底上分子束外延Ge,Ge/Si超薄叠层的生长行为和生长特性。利用RHEED强度振荡,锁相控制生长了Ge(2ML)/Si(2ML),Ge(4ML)/Si(4ML)超薄超晶格。 关键词：     

Si(111)分子束外延的生长动力学过程研究

本文用反射式高能电子衍射(RHEED)强度振荡研究了不同生长温度下Si(111)分子束外延的生长动力学过程,生长温度高于520℃(生长速率约0.15?/S)时,Si(111)外延为“台阶流”生长模式,生长温度低于475℃时,外延为“二维成核”双原子层生长模式,在较低温,甚至室温时,其外延仍为双原子层模式,但是镜向弹性散射束振荡和非弹性散射束振荡的叠加会造成RHEED强度在生长的最初阶段出现“类单原子层”模式的振荡特性。 关键词：     

GaSb/AlSb/GaAs应变层结构的分子束外延生长

本文以反射式高能电子衍射(RHEED)和其强度振荡为监测手段,在半绝缘GaAs衬底上成功地生长GaSb/AlSb/GaAs应变层结构,RHEED图样表明,GaSb正常生长时为Sb稳定的C(2×6)结构,AlSb为稳定的(1×3)结构,作者观察并记录GaSb,AlSb生长时的RHEED强度振荡,并利用它成功地生长10个周期的GaSb/AlSb超晶格,透射电子显微镜照片显示界面平整、清晰,采用较厚的AlSb过渡层及适当的生长条件,可在半绝缘GaAs衬底上生长出质量好的GaSb外延层,其X射线双晶衍射半峰宽小于 关键词：     

分子束外延生长亚稳态ZnCdSe/MgSe低维量子阱结构及其光学性质

采用分子束外延技术在(001)取向的InP衬底上外延生长了亚稳态的ZnxCd1-xSe/MgSe低维量子阱结构,并通过光致发光和子带吸收方法,分析其能带结构。在单量子阱样品制备过程中,高能电子衍射强度振荡表明MgSe可以实现二维生长模式,衍射图样证明其为亚稳态闪锌矿结构。通过引入厚的ZnxCd1-xSe空间层,抑制了MgSe垒层的相变,并能进一步提高样品的结晶质量,得到高结晶质量的多量子阱结构。通过计算不同阱宽的能带与光致发光实验比较,证明了ZnxCd1-xSe/MgSe的导带带阶为1.2 eV,价带带阶为0.27 eV。为了进一步验证其能带结构,制备了电子掺杂的ZnxCd1-xSe/MgSe的多量子阱,观测到半高宽很窄的中红外吸收。利用发光谱确定的带阶计算了量子阱中子带的吸收波长,和实验结果非常吻合。设计了一种双量子阱结构,计算结果显示,通过利用量子阱中的耦合效应,可以实现1.55μm光通信波段的吸收。     

界面生长中断对GaAs (111)衬底上 AlGaAs/GaAs量子阱电子自旋寿命的影响

用固源分子束外延技术(SSMBE)在GaAs(111)衬底上,采用不同的界面中断时间生长了多组AlGaAs/GaAs多量子阱样品(MQWs),通过室温发光光谱和时间分辨克尔旋转谱(TRKR)研究了界面生长中断对发光光谱半峰全宽(FWHM)和量子阱中电子自旋弛豫时间(自旋寿命)的影响,发现了自旋寿命随着界面生长中断时间的增加呈现先减小后增加的趋势,此变化趋势与荧光光谱半峰全宽表征的材料质量随中断时间的变化一致,适当的界面生长中断时间能有效的增加GaAs (111)衬底上AlGaAs/GaAs 多量子阱中电子自旋寿命。     

Molecular beam epitaxy of CdSe epilayers and quantum wells on ZnTe substrate

We have grown zinc-blende cadmium selenide (CdSe) epilayers on ZnTe-(0 0 1) substrate by molecular beam epitaxy (MBE). By controlling the substrate temperature and beam-equivalent pressure (BEP) ratio, of Se to Cd, we determined the most suitable growth condition based on reflection high-energy electron diffraction (RHEED) pattern. At a substrate temperature of 280 °C and a BEP ratio of 3.6, the RHEED pattern showed a V-like feature, indicating a rough surface with facets. As the substrate temperature was increased to 360 °C at the same BEP ratio, a V-like RHEED pattern moved to a clear streaky pattern. Moreover when the BEP ratio was increased to 4.8 at 360 °C of substrate temperature, a clear (2 × 1) reconstruction of the CdSe layer was observed. A CdSe/CdMgSe single quantum well structure was also grown on ZnTe-(0 0 1) substrate by MBE. The RHEED pattern showed a clear (2 × 1) surface reconstruction during the growth. By photoluminescence measurement, a good optical property of the structure was obtained.     

Surface preparation effect of GaAs(110) substrates on the ZnSe epitaxial layer grown by molecular beam epitaxy

The effect of the surface preparation of the GaAs(110) substrate on the ZnSe epitaxial layer grown by molecular beam epitaxy (MBE) was investigated by means of etch-pit density (EPD) measurements, surface morphology observation, and reflection high-energy electron diffraction (RHEED) analysis. The ZnSe epitaxial layer grown on a GaAs(110) surface prepared by cleaving the (001)-oriented wafer in ultrahigh vacuum (UHV) showed about 5×10⁴ cm^-2 of EPD. This value is much lower than that observed from both the samples grown on the mechanically polished surface with and without a GaAs buffer layer. Due to the non-stoichiometric surface after thermal evaporation of the surface oxide, three-dimensional growth can easily occur on the mechanically polished GaAs(110) substrate. These results suggest that the stoichiometric and atomically flat substrate surface is essential for the growth of low-defect ZnSe epitaxial layers on the GaAs(110) non-polar surface. Received: 21 August 1998 / Accepted: 19 October 1998 / Published online: 28 April 1999     

Formation process for and strain effect in InAs quantum dots grown on GaAs substrates by using molecular beam epitaxy

Reflection high-energy electron diffraction (RHEED) and atomic force microscopy (AFM) measurements were used to investigate the dependences of the formation process and the strain on the As/In ratio and the substrate temperature of InAs quantum dots (QDs) grown on GaAs substrates by using molecular beam epitaxy. The thickness of the InAs wetting layer and the shape and the size of the InAs QDs were significantly affected by the As/In ratio and the substrate temperature. The strains in the InAs layer and the GaAs substrate were studied by using RHEED patterns. The magnitude in strain of the InAs QDs formed at a low substrate temperature was larger than that in InAs QDs grown at high substrate temperature. The present results can help to improve the understanding of the formation process and the strain effect in InAs QDs.     

(1 1 0) oriented quantum wells and modulation-doped heterostructures for cleaved edge overgrowth

The dependence of the optical quality, i.e. the line width and homogeneity of (1 1 0) oriented quantum wells on the substrate temperature, the As pressure as well as on the As species is studied by means of micro-photoluminescence. Molecular beam epitaxial growth using the As dimer leads to a photoluminescence line width as narrow as 5.5 meV for 7 nm wide quantum wells compared to a value of 8 meV for the As tetramer source. In addition to the small line widths which can be achieved using As , quantum wells grown under these conditions are also superior to those using As in terms of uniformity on a m length scale. In contrast, the peak mobility of a two-dimensional electron system located at a (1 1 0) oriented GaAs/AlGaAs heterointerface of cm V s is obtained for tetramer growth, while the use of As degrades the electron mobility to values below 500 000 cm V s.     

Photoluminescence and secondary ion mass spectroscopy characterization of GaAs-AlGaAs quantum wells grown on GaAs (1 0 0) substrates with different surface treatments

GaAs (1 0 0) substrates prepared in a quartz chamber under a H₂/As₄ flux, and then exposed to air were used for the subsequent growth of GaAs-AlGaAs single quantum wells by molecular beam epitaxy. The substrates prepared by this method showed atomically flat surfaces corroborated by atomic force microscopy analysis. Quantum wells grown directly on these substrates without a GaAs buffer layer exhibited narrow and intense photoluminescence peaks, an indication of a high quality material. The secondary ion mass spectroscopy analysis showed oxygen and carbon traces on the first AlGaAs barrier layer grown after air exposure with no effects on the quantum wells optical emissions. From the results we conclude that the prepared GaAs surfaces are useful for the epitaxial growth of high quality quantum structures.     

{1 1 1} Quantum wells of dilute nitrides grown on GaAs by molecular beam epitaxy

Dilute nitrides are promising alloys in view of extending potential micro- and opto-electronics applications of GaAs technology. Orientation effects on nitrogen incorporation in GaAs have been scarcely addressed. Here, GaAsN on (1 0 0) and on As(B)- and Ga(A)-rich (1 1 1) substrates was grown by molecular beam epitaxy at different substrate temperatures. Nitrogen content measured by secondary ion mass spectrometry as a function of the growth temperature highlights the influence of orientation on nitrogen incorporation. Furthermore, thermal annealing is shown to improve the optical quality of GaAsN quantum wells whatever their substrate orientations.     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

Anomalous spin dephasing in (110) GaAs quantum wells: anisotropy and intersubband effects

A strong anisotropy of electron spin decoherence is observed in GaAs/(AlGa)As quantum wells grown on a (110) oriented substrate. The spin lifetime of spins perpendicular to the growth direction is about one order of magnitude shorter compared to spins along [110]. The spin lifetimes of both spin orientations decrease monotonically above temperatures of 80 and 120 K, respectively. The decrease is very surprising for spins along the [110] direction and cannot be explained by the usual Dyakonov-Perel dephasing mechanism. A novel spin dephasing mechanism is put forward that is based on scattering of electrons between different quantum well subbands.