An analytic approach to theoretical modeling of highly unsteady viscous flow excited by wing flapping in small insects

Numerous studies on the aerodynamics of insect wing flapping were carried out on different approaches of flight investigations, model experiments, and numerical simulations, but the theoretical modeling remains to be explored. In the present paper, an analytic approach is presented to model the flow interactions of wing flapping in air for small insects with the surrounding flow fields being highly unsteady and highly viscous. The model of wing flapping is a 2-D flat plate, which makes plunging and pitching oscillations as well as quick rotations reversing its positions of leading and trailing edges, respectively, during stroke reversals. It contains three simplified aerodynamic assumptions: (i) unsteady potential flow; (ii) discrete vortices shed from both leading and trailing edges of the wing; (iii) Kutta conditions applied at both edges. Then the problem is reduced to the solution of the unsteady Laplace equation, by using distributed singularities, i.e., sources/sinks, and vortices in the field. To validate the present physical model and analytic method proposed via benchmark examples, two elemental motions in wing flapping and a case of whole flapping cycles are analyzed, and the predicted results agree well with available experimental and numerical data. This verifies that the present analytical approach may give qualitatively correct and quantitatively reasonable results. Furthermore, the total fluid-dynamic force in the present method can be decomposed into three parts: one due to the added inertial (or mass) effect, the other and the third due to the induction of vortices shed from the leading-and the trailing-edge and their images respectively, and this helps to reveal the flow control mechanisms in insect wing flapping. The project supported by the National Natural Science Foundation of China (10072066) and the Chinese Academy of Sciences (KJCX-SW-LO4, KJCX2-SW-L2)     

扑翼柔性及其对气动特性的影响

以往对扑翼气动特性的研究基本上都是基于简单的匀速刚性模型,但是通过大量观察不同飞鸟的扑翼动作发现,该模型与鸟翼的实际扑动还有很大差别。鸟翼不但上扑段和下扑段所需时间不同,而且在扑动过程中,鸟翼的形状无论沿弦向或展向都存在着相当大的柔性变形。本文在原有匀速刚性模型的基础上,加入了扑动速率变化和形状变化的影响,得出新的变速柔性扑翼分析模型,使之更接近鸟翼柔性扑动的真实情况。通过对比计算发现,柔性变形对扑翼的升力与推力都有着显著影响,如果控制得当,柔性变形能大大改善扑翼的气动性能。     

Effects of wing deformation on aerodynamic performance of a revolving insect wing

Flexible wings of insects and bio-inspired micro air vehicles generally deform remarkably during flapping flight owing to aerodynamic and inertial forces,which is of highly nonlinear fluid-structure interaction（FSI）problems.To elucidate the novel mechanisms associated with flexible wing aerodynamics in the low Reynolds number regime,we have built up a FSI model of a hawkmoth wing undergoing revolving and made an investigation on the effects of flexible wing deformation on aerodynamic performance of the revolving wing model.To take into account the characteristics of flapping wing kinematics we designed a kinematic model for the revolving wing in two-fold：acceleration and steady rotation,which are based on hovering wing kinematics of hawkmoth,Manduca sexta.Our results show that both aerodynamic and inertial forces demonstrate a pronounced increase during acceleration phase,which results in a significant wing deformation.While the aerodynamic force turns to reduce after the wing acceleration terminates due to the burst and detachment of leading-edge vortices（LEVs）,the dynamic wing deformation seem to delay the burst of LEVs and hence to augment the aerodynamic force during and even after the acceleration.During the phase of steady rotation,the flexible wing model generates more ver-tical force at higher angles of attack（40°–60°）but less horizontal force than those of a rigid wing model.This is because the wing twist in spanwise owing to aerodynamic forces results in a reduction in the effective angle of attack at wing tip,which leads to enhancing the aerodynamics performance by increasing the vertical force while reducing the horizontal force.Moreover,our results point out the importance of the fluid-structure interaction in evaluating flexible wing aerodynamics：the wing deformation does play a significant role in enhancing the aerodynamic performances but works differently during acceleration and steady rotation,which is mainly induced by inertial force in acceleration but by aerodynamic forces     

VISCOELASTIC CONSTITUTIVE MODEL RELATED TO DEFORMATION OF INSECT WING UNDER LOADING IN FLAPPING MOTION

Flexible insect wings deform passively under the periodic loading during napping flight. The wing flexibility is considered as one of the specific mechanisms on improving insect flight performance. The constitutive relation of the insect wing material plays a key role on the wing deformation, but has not been clearly understood yet. A viscoelastic constitutive relation model was established based on the stress relaxation experiment of a dragonfly wing (in vitro). This model was examined by the finite element analysis of the dynamic deformation response for a model insect wing under the action of the periodical inertial force in flapping. It is revealed that the viscoelastic constitutive relation is rational to characterize the biomaterial property of insect wings in contrast to the elastic one. The amplitude and form of the passive viscoelastic deformation of the wing is evidently dependent on the viscous parameters in the constitutive relation.     

Large aerodynamic forces on a sweeping wing at low Reynolds number

The aerodynamic forces and flow structure of a model insect wing is studied by solving the Navier-Stokes equations numerically. After an initial start from rest, the wing is made to execute an azimuthal rotation (sweeping) at a large angle of attack and constant angular velocity. The Reynolds number (Re) considered in the present note is 480 (Re is based on the mean chord length of the wing and the speed at 60% wing length from the wing root). During the constant-speed sweeping motion, the stall is absent and large and approximately constant lift and drag coefficients can be maintained. The mechanism for the absence of the stall or the maintenance of large aerodynamic force coefficients is as follows. Soon after the initial start, a vortex ring, which consists of the leading-edge vortex (LEV), the starting vortex, and the two wing-tip vortices, is formed in the wake of the wing. During the subsequent motion of the wing, a base-to-tip spanwise flow converts the vorticity in the LEV to the wing tip and the LEV keeps an approximately constant strength. This prevents the LEV from shedding. As a result, the size of the vortex ring increases approximately linearly with time, resulting in an approximately constant time rate of the first moment of vorticity, or approximately constant lift and drag coefficients. The variation of the relative velocity along the wing span causes a pressure gradient along the wingspan. The base-to-tip spanwise flow is mainly maintained by the pressure-gradient force. The project supported by the National Natural Science Foundation of China (10232010)     

Experimental investigation on aerodynamic performance of a flapping wing vehicle in forward flight

The aerodynamic performance of a flexible membrane flapping wing has been investigated here. For this purpose, a flapping-wing system and an experimental set-up were designed to measure the unsteady aerodynamic forces of the flapping wing motion. A one-component force balance was set up to record the temporal variations of aerodynamic forces. The flapping wing was studied in a large low-speed wind tunnel. The lift and thrust of this mechanism were measured for different flapping frequencies, angles of attack and for various wind tunnel velocities. Results indicate that the thrust increases with the flapping frequency. An increase in the wind tunnel speed and flow angle of attack leads to reduction in the thrust value and increases the lift component. The aerodynamic and performance parameters were nondimensionalized. Appropriate models were introduced which show its aerodynamic performance and may be used in the design process and also optimization of the flapping wing.     

Aerodynamics and mechanisms of elementary morphing models for flapping wing in forward flight of bat

Large active wing deformation is a significant way to generate high aerodynamic forces required in bat's flapping flight. Besides the twisting, elementary morphing models of a bat wing are proposed, including wing-bending in the spanwise direction, wing-cambering in the chordwise direction, and wing area-changing. A plate of aspect ratio 3 is used to model a bat wing, and a three-dimensional unsteady panel method is used to predict the aerodynamic forces. It is found that the cambering model has great positive influence on the lift, followed by the area-changing model and then the bending model. Further study indicates that the vortex control is a main mechanism to produce high aerodynamic forces. The mechanisms of aerodynamic force enhancement are asymmetry of the cambered wing and amplification effects of wing area-changing and wing bending. Lift and thrust are generated mainly during downstroke, and they are almost negligible during upstroke by the integrated morphing model-wing.     

飞行器纵向俯仰气动特性计算研究

应用有限体积方法求解三维可压缩雷诺平均N-S方程,计算了巡航导弹外形飞行器作小振幅俯仰运动时的动态绕流流场和空气动力特性,开展了导弹绕不同转轴、以不同频率和在不同迎角范围内进行俯仰运动的非定常气动力迟滞特性研究。计算结果表明,当导弹作快速俯仰运动时,在上仰和下俯过程中的同一迎角瞬间,绕导弹流场流动明显不同,表现出明显的非定常迟滞特性。导弹的非定常气动力迟滞特性随俯仰运动频率的增大明显增强,且气动力迟滞曲线随着俯仰轴位置的变化而变化。在同一减缩频率下,导弹在不同迎角范围内作周期俯仰运动时,相同的运动相位角所对应的升力系数对迎角的导数是一致的,而不同减缩频率下升力系数对迎角的导数随运动相位角变化曲线明显不同。     

Aerodynamic mechanism of forces generated by twisting model-wing in bat flapping flight

The aerodynamic mechanism of the bat wing membrane Mong the lateral border of its body is studied. The twist-morphing that alters the angle of attack （AOA） along the span-wise direction is observed widely during bat flapping flight. An assumption is made that the linearly distributed AOA is along the span-wise direction. The plate with the aspect ratio of 3 is used to model a bat wing. A three-dimensional （3D） unsteady panel method is used to predict the aerodynamic forces generated by the flapping plate with leading edge separation. It is found that, relative to the rigid wing flapping, twisting motion can increase the averaged lift by as much as 25% and produce thrust instead of drag. Furthermore, the aerodynamic forces （lift/drag） generated by a twisting plate-wing are similar to those of a pitching rigid-wing, meaning that the twisting in bat flight has the same function as the supination/pronation motion in insect flight.     

Mechanism of unsteady aerodynamic heating with sudden change in surface temperature

The characteristics and mechanism of unsteady aerodynamic heating of a transient hypersonic boundary layer caused by a sudden change in surface temperature are studied. The complete time history of wall heat flux is presented with both analytical and numerical approaches. With the analytical method, the unsteady compressible boundary layer equation is solved. In the neighborhood of the initial and final steady states, the transient responses can be expressed with a steady-state solution plus a perturbation series. By combining these two solutions, a complete solution in the entire time domain is achieved. In the region in which the analytical approach is applicable, numerical results are in good agreement with the analytical results, showing reliability of the methods. The result shows two distinct features of the unsteady response. In a short period just after a sudden increase in the wall temperature, the direction of the wall heat flux is reverted, and a new inflexion near the wall occurs in the profile of the thermal boundary layer. This is a typical unsteady characteristic. However, these unsteady responses only exist in a very short period in hypersonic flows, meaning that, in a long-term aerodynamic heating process considering only unsteady surface temperature, the unsteady characteristics of the flow can be ignored, and the traditional quasi-steady aerodynamic heating prediction methods are still valid.     

高超声速非定常流动的数值模拟与气动热计算

高超声速飞行器研究中的一个重点问题是飞行器表面的气动加热,它对飞行器的气动、热特性及安全性有重要的影响.受到当前实验技术的限制,地面实验无法准确模拟真实飞行条件,所以采用数值模拟研究气动加热问题成为目前重要的研究手段.本文采用数值方法求解三维N-S方程,得到钝头体再入模型绕流的瞬态流场,驻点温度及表面热流沿轨道变化规律.计算中采用变边界条件模拟沿轨道飞行的非定常性.     

Effects of aspect ratio on flapping wing aerodynamics in animal flight

Morphology as well as kinematics is a critical determinant of performance in flapping flight.To understand the effects of the structural traits on aerodynamics of bioflyers,three rectangular wings with aspect ratios（AR）of1,2,and 4 performing hovering-like sinusoidal kinematics at wingtip based Reynolds number of 5 300 are experimentally investigated.Flow structures on sectional cuts along the wing span are compared.Stronger K-H instability is found on the leading edge vortex of wings with higher aspect ratios.Vortex bursting only appears on the outer spanwise locations of high-aspect-ratio wings.The vortex bursting on high-aspect-ratio wings is perhaps one of the reasons why bio-flyers normally have low-aspect-ratio wings.Quantitative analysis exhibits larger dimensionless circulation of the leading edge vortex（LEV）over higher aspect ratio wings except when vortex bursting happens.The average dimensionless circulation of AR1 and AR2 along the span almost equals the dimensionless circulation at the 50%span.The flow structure and the circulation analysis show that the sinusoidal kinematics suppresses breakdown of the LEV compared with simplified flapping kinematics used in similar studies.The Reynolds number effect results on AR4 show that in the current Re range,the overall flow structure is not sensitive to Reynolds number.     

The influence of the wake of a flapping wing on the production of aerodynamic forces

The effect of the wake of previous strokes on the aerodynamic forces of a flapping model insect wing is studied using the method of computational fluid dynamics. The wake effect is isolated by comparing the forces and flows of the starting stroke (when the wake has not developed) with those of a later stroke (when the wake has developed). The following has been shown. (1) The wake effect may increase or decrease the lift and drag at the beginning of a half-stroke (downstroke or upstroke), depending on the wing kinematics at stroke reversal. The reason for this is that at the beginning of the half-stroke, the wing ``impinges' on the spanwise vorticity generated by the wing during stroke reversal and the distribution of the vorticity is sensitive to the wing kinematics at stroke reversal. (2) The wake effect decreases the lift and increases the drag in the rest part of the half-stroke. This is because the wing moves in a downwash field induced by previous half-stroke's starting vortex, tip vortices and attached leading edge vortex (these vortices form a downwash producing vortex ring). (3) The wake effect decreases the mean lift by 6%–18% (depending on wing kinematics at stroke reversal) and slightly increases the mean drag. Therefore, it is detrimental to the aerodynamic performance of the flapping wing. The project supported by the National Natural Science Foundation of China (10232010) and the National Aeronautic Science Fund of China(03A51049) The English text was polished by Xing Zhang     

气动载荷压心变化对机翼结构重量的影响

借助PATRAN、NASTRAN有限元分析工具,着重研究机翼结构重量因气动载荷压心变化而产生的影响。气动载荷的压心变化通过在飞机巡航状态中某一个载荷情况下真实的气动载荷基础上叠加一个微小量的分布载荷来实现,保证新得到的气动载荷与原始的气动载荷总载保持一致,从而使得气动载荷的压心位置发生变化。通过理论分析和简单的有限元分析验证,得到了气动载荷压心变化下机翼蒙皮、长桁等单元的应力分布和增长规律,进而得到气动载荷压心变化与机翼结构增重之间的函数关系:气动载荷压心向翼尖方向移动1%,机翼结构重量增重2.46%。该结论可以为其他型号的民机机翼设计提供参考依据。     

Convergence of steady and unsteady formulations for inviscid hovering rotor solutions

An upwind Euler solver is presented, and applied to multibladed lifting hovering rotor flow. These flows can be simulated as a steady case, in a blade‐fixed rotating co‐ordinate system. However, forward flight simulation will always require an unsteady solution. Hence, as a stepping stone in the development of a forward flight simulation tool, both explicit steady and implicit unsteady simulations of the same hovering case are presented. Convergence of the two approaches is examined and compared, in terms of residual history, cost, and solution evolution, as a means of both validating the unsteady formulation and considering implications for forward flight simulation. Consideration of the solution evolution and wake capturing shows that for hovering rotor cases, the unsteady and steady solutions are the same, but the unsteady solution is more expensive in terms of CPU time. It is also shown that for hover, the fewer real time‐steps taken per revolution the more efficient the implicit scheme is. However, this is a characteristic of the case, which results in smooth solution variation between time steps. It is also demonstrated that for rotary flow simulation, the global residual is not a useful quantity to assess convergence. The residual reaches a very low (constant in the implicit case) value while the solution is still evolving. Copyright © 2003 John Wiley & Sons, Ltd.     

随机风作用下高速列车非定常气动载荷的计算方法

基于Cooper理论和谐波叠加法计算随车移动点的脉动风速,分析不同风向角下脉动风速的功率谱密度特性.在横风下高速列车非定常气动载荷计算方法的基础上,建立了侧风下高速列车非定常气动载荷的计算方法,并用此方法分析了侧向随机风作用下非定常气动载荷的统计特性,给出了各气动载荷的峰值因子.研究表明,当风向角接近90°时,无量纲功率谱会往高频移动,风向角对脉动风速的影响较小;在各个风向角下,气动载荷的标准差与平均值的比值仅依赖于侧偏角,侧力与侧滚力矩的峰值因子相同,摇头力矩与点头力矩的峰值因子相同.     

Rotary aerodynamic derivatives in the asymptotic theory of a high-aspect-ratio wing

The linear problem of inviscid incompressible flow around a high-aspect-ratio wing at an angle of attack and in the presence of steady pitching and rolling rotation is considered. The main integral equation of the problem is reduced to a sequence of one-dimensional integral equations without use of the matched asymptotic expansions method. The first few terms of the series for the circulation distribution over the wing surface are calculated. For an elliptic high-aspect-ratio wing the corresponding aerodynamic forces are calculated. The derivatives of the aerodynamic coefficients of the wing with respect to the angle of attack and the angular velocities are determined. The asymptotic expressions obtained are compared with the results of numerical calculations of the corresponding derivatives using the discrete vortex method.     

Computation of unsteady flow past blunt bodies

In accordance with the recent experimental research for flow visualization,theunsteady behavior of the starting period is investigated numerically for flow past bluntbodies.Finite difference methods are employed to solve the unsteady two-dimensionalincompressible Navier-Stokes equations.A short discussion is presented of explicit,implicit and ADI methods.Finally,the explicit and ADI schemes are used to study the flowfield in the starting period for flow past mountain-shaped and rectangular bodies.     

Multigrid convergence of inviscid fixed‐ and rotary‐wing flows

The affect of multigrid acceleration implemented within an upwind‐biased Euler method is presented, and applied to fixed‐wing and rotary‐wing flows. The convergence of fixed‐ and rotary‐wing computations is shown to be vastly different, and multigrid is shown to be less effective for rotary‐wing flows. The flow about a hovering rotor suffers from very slow convergence of the inner blade region, where the flow is effectively incompressible. Furthermore, the vortical wake must develop over several turns before convergence is achieved, whereas for fixed‐wing computations the far‐field grid and solution have little significance. Results are presented for single mesh and two, three, four, and five level multigrid, and using five levels a reduction in required CPU time of over 80 per cent is demonstrated for rotary‐wing computations, but 94 per cent for fixed‐wing computations. It is found that a simple V‐cycle is the most effective, smoothing in the decreasing mesh density direction only, with a relaxed trilinear prolongation operator. Copyright © 2002 John Wiley & Sons, Ltd.