重离子辐照胸腺嘧啶产物的毛细管气相色谱分析

对经中能的１８Ｏ８＋离子辐照过的胸腺嘧啶Ｎ２Ｏ饱和水溶液进行了研究,利用气相色谱（ＧＣ）、气相色谱 质谱联用（ＧＣ ＭＳ）、气相色谱 红外光谱联用（ＧＣ ＦＴＩＲ）等仪器对辐照后的产物进行了分析、鉴别,观察到了５,６ 二氢胸腺嘧啶、５ 羟基 ５ 甲基 乙内酰脲、５ 羟基（氢） ６ （氢）羟基胸腺嘧啶、５ 羟甲基尿嘧啶、顺（反）胸腺嘧啶二醇和二聚体等产物。虽然重离子主要是通过辐照水溶液中产生的羟基、氢原子等对胸腺嘧啶分子产生了作用,但与γ射线作用机制和结果是不同的。     

Chromium(III) determination with 1,5-diphenylcarbazide based on the oxidative effect of chlorine radicals generated from CCl4 sonolysis in aqueous solution.

Oxidation of Cr(III) during sonication in carbonated aqueous solutions saturated with CCl4 leads to the quantitative formation of Cr(VI) and provides a simple and rapid method for spectrophotometric chromium determination with 1,5-diphenylcarbazide. The key to this method is the production of chlorine radicals when aqueous solution saturated with CCl4 is exposed to ultrasonic waves of 40 kHz. The effects of sonication period, CCl4 solution volume, acidity, and interferences were discussed. The time required for a single determination is lower than 2 min. The relative standard deviation obtained for aqueous solutions with 1 microg of Cr was < 2% (N = 10) and the calculated detection limit (3sigma) was 5 ng of Cr.     

Temperature change from isenthalpic expansion of aqueous triethylene glycol mixtures for natural gas dehydration

In natural gas dehydration units, rich TEG solutions are decompressed before the TEG regeneration stage and the direction of the temperature change during the decompression has been debated. The temperature change from an isenthalpic expansion from (7000 kPa to 440 kPa was measured for the following aqueous mixtures: pure water, 99% pure triethylene glycol (TEG), aqueous TEG (99 wt% TEG + 1% water), aqueous TEG saturated with methane, aqueous TEG saturated with n-pentane, and aqueous TEG saturated with n-heptane. In all cases, the temperature increased upon expansion with the magnitude of the temperature change ranging from 1.4 K for pure water to 2.4 K for TEG. A simple equation of state model predicted the correct direction for the temperature change and the predicted values were within ±1 K of the experimental data.     

Determination of aliphatic amines using N-succinimidyl benzoate as a new derivatization reagent in gas chromatography combined with solid-phase microextraction

A simple, selective and sensitive approach was developed for the quantitation of aliphatic amines in lake water applying a new reagent (N-succinimidyl benzoate, SIBA), synthesized in the laboratory of the authors. Derivatization of the n-C1-C6 aliphatic monoamines and dimethylamine in aqueous solution with SIBA was followed by headspace solid-phase microextraction (SPME). Derivatives were identified by gas chromatography-mass spectrometry and determined by gas chromatography-flame ionization detection. Both derivatization and SPME conditions have been optimized. Derivatizations were performed in borate buffer (pH 8.8), at 60 degrees C for 22 min. SPME was carried out from saturated sodium chloride solution, at 80 degrees C for 60 min, desorption at 250 degrees C for 2 min. Detection limit of derivatized amines proved to be 0.13-7.2 nmol/l, while recovery of amines from lake water samples, in the concentration range of 100-200 microg/l, varied from 94.1 to 102.7%.     

Simultaneous extraction and determination of traces of lead and arsenic in petrol by electrothermal atomic absorption spectrometry

The lead and arsenic compounds are converted to water-soluble iodides by reaction with a solution of iodine in toluene extraction into dilute nitric acid before determination by graphite-furnace atomic absorption spectrometry against aqueous standards. The method is simple, rapid, accurate and reasonably precise.     

二钼酸铵晶体饱和水溶液Raman光谱的变异现象及其机理

记录了常温下二钼酸铵晶体饱和水溶液的Raman光谱，并分别与二钼酸铵晶体、仲钼酸铵晶体、仲钼酸铵晶体饱和水溶液、水溶液状态下单钼酸根离子的Raman光谱进行了比较研究。结果表明：二钼酸铵晶体饱和水溶液Raman光谱相对二钼酸铵晶体Raman光谱，明显地发生了变异现象。二钼酸铵晶体饱和水溶液Raman光谱其主要特征峰最高振动频率937.6 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征峰最高振动频率937.6 cm^-1完全吻合，而其次高振动频率893.9 cm^-1，恰好介于水溶液中单钼酸根离子Raman光谱主要特征峰最高振动频率895.1 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征次高峰振动频率891.0 cm^-1之间，而且三者彼此接近。二钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值为2.1，与仲钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值4.4相比，一半不足。提出了一种利用Raman光谱主要特征峰振动频率及其主、次特征峰强度之比值对二钼酸铵晶体饱和水溶液组分同时进行定性和半定量分析的新方法。发现了常温下二钼酸铵晶体饱和水溶液中二钼酸根离子Mo₂O₇^2-已经不复存在，完全转变成了优势组分仲钼酸根离子Mo₇O₂₄^6-和次要组分单钼酸根离子MoO₄^2-；证明了常温下含钼水溶液酸化过程中溶液Raman光谱离散性变化现象的存在。运用结构化学和物理化学原理同时讨论了二钼酸铵晶体饱和水溶液Raman光谱发生变异现象的机理。     

Pyrolysis—gas chromatography of quaternary ammonium salts in aqueous solution

The pyrolysis of a range of simple quaternary ammonium salts in aqueous solution has been studied by gas chromatographic procedures. The results indicate that the structure of the cation governs the thermal stability and breakdown pattern of the salts, the nature of the anion having no apparent effect on the process. The mechanism of the decomposition is discussed as is the potential of aqueous pyrolysis—gas chromatography for analytical studies of quaternary ammonium salts in general.     

Nanobubble clusters of dissolved gas in aqueous solutions of electrolyte. I. Experimental proof

Results of experiments with dynamic light scattering, phase microscopy, and polarimetric scatterometry allow us to claim that long-living gas nanobubbles and the clusters composed of such nanobubbles are generated spontaneously in an aqueous solution of salt, saturated with dissolved gas (say, atmospheric air). The characteristic sizes of both nanobubbles and their clusters are found by solving the inverse problem of optical wave scattering in ionic solutions. These experimental results develop our earlier study reported by Bunkin et al. [J. Chem. Phys. 130, 134308 (2009)] and can be treated as evidence for the special role of ions in the generation and stabilization of gas nanobubbles.     

High-performance liquid chromatographic determination of prifinium quaternary ammonium ion in human serum and urine

A simple, sensitive method for the determination of the prifinium ion, a quaternary ammonium ion, in human serum and urine is described. The method is based on extraction of the test solution with chloroform in the presence of saturated potassium bromide solution and normal-phase high-performance liquid chromatography using aqueous methanol as the mobile phase at pH 10. To prevent the dissolution of silica from the analytical column, the mobile phase is pre-saturated with silica by using a silica saturation column. Quantitation is possible down to 0.5 ng/ml of prifinium ion using 2 ml of serum and down to 5 ng/ml using a 1 ml of urine. The coefficients of variation of the method are less than 1.3% in both serum and urine. Serum levels and urinary excretion data obtained with this method are given for three healthy volunteers who had received a 60-mg oral dose of prifinium bromide.     

A new sensor for electrochemical determination of captopril using chlorpromazine as a mediator at a glassy carbon electrode

A new simple, selective and rapid cyclic voltammetric method is reported for the accurate and precise determination of captopril using chlorpromazine as a suitable electrocatalyst. It has been shown by cyclic voltammetry, single step chronoamperometry and electrochemical impedance spectroscopy that chlorpromazine can catalyze the oxidation of captopril in aqueous buffer solution and produces a sharp oxidation peak current at about 0.625 V vs. saturated calomel reference electrode. The catalytic oxidation peak current of captopril is linearly dependent on its concentration and enables the determination of captopril over the concentration range of 8–1000 μM at pH 5.0, with a detection limit of 4.8 μM. The relative standard deviation for the determination of 400 μM captopril is 0.66% (n = 9). The influence of potential interfering substances on the determination of captopril was studied. The method was satisfactorily applied to the determination of captopril in real samples such as drug and urine.     

Determination of fosinopril in pharmaceutical formulations containing hydrochlorothiazide by multiwavelength UV spectrophotometry

A sensitive, simple, rapid and precise method for the simultaneous determination of fosinopril (FOS) and hydrochlorothiazide (HCT) in pharmaceutical formulations is presented. These active ingredients are extracted in aqueous solution and measured by multiwavelength UV spectrophotometry using the program QUEST. HCT acts as an internal standard to verify the accuracy of the analysis. Some aspects of the chemical, spectroscopic and thermoanalytical behaviour of FOS are also reported.     

Effect of Composition and Structure of Aqueous Monoethanolamine Solutions on Carbon Dioxide Sorption and Desorption in Purification of Gas Mixtures

Possibility of raising the efficiency of the monoethanolamine purification of gas mixtures to remove carbon dioxide is demonstrated with consideration for the real intermolecular interactions and the structuring in the absorbent solution. The composition and structure of individual aqueous monoethanolamine solutions with various concentrations and of the same solutions saturated with carbon dioxide were examined. The methods of viscometry and conductometry demonstrated that, at monoethanolamine concentrations exceeding 12 ± 2 wt %, micelles are formed on the background of the existence of associates with intermolecular hydrogen bonds. This necessitates use of high temperatures (120?140°C) in the stage of carbon dioxide desorption. It was found that using a 12 wt % aqueous solution of monoethanolamine in purification of gas mixtures makes it possible to lower the desorption temperature of carbon dioxide to 90°C. This process is more efficient than the standard technology of CO₂ removal from a 30 wt % monoethanolamine solution. This is so because, in addition to a lower expenditure of heat, the extraction of carbon dioxide grows by 16% at a simultaneous decrease in the absorbent expenditure by at least a factor of 2.5.     

Determination of potassium and sodium in mixtures of their salts by means of cation exchangers

Methods for the determination of two substances in aqueous solutions (or water-soluble mixtures) are described. A sample of the solution is dried and the residue accurately weighed. Another sample of the same volume is passed through a cation exchanger (when cations are to be determined), saturated with one of the ions in the solution. After washing with distilled water the combined effluent and wash-water are dried and the residue carefully weighed. From these weighings the composition of the solution is determined by simple calculations, the maximum relative error being < 2.0%. The method may be used for the determination of anions, if an anion exchanger is used instead of the cation exchanger.A variation of the method consists in passing the solution through a cation exchanger in the hydrogen form. The number of equivalents is determined by standard alkali titration and from this and the weight before the ion-exchange passage the composition of the solution can be determined. In this case, however, the maximum relative error is larger. This method is directly applicable to the determination of anions.     

Stereoelectronic interactions and the one-bond C-F coupling constant in sevoflurane

The conformational preference of the widely utilized anesthetic fluoromethyl-1,1,1,3,3,3-hexafluoro-2-propyl ether (sevoflurane) has been investigated computationally and by NMR spectroscopy. Three conformational minima were located at the B3LYP/aug-cc-pVDZ level, but one is significantly more stable (by ca. 4 kcal/mol) than the other two. This is the case both for gas phase calculations and for solution NMR data. Although the main conformer is stabilized by electron delocalization (n(O) → σ*(C-F)), this type of hyperconjugation was not found to be the main driver for the conformer stabilization in the gas phase and, consequently, for the apparent anomeric effect in sevoflurane. Instead, more classical steric and electrostatic interactions appear to be responsible for the conformational energies. Also the (1)J(CF) coupling constants do not appear to be dominated by hyperconjugation; again, dipolar interactions are invoked instead.     

Evaporation studies on sodium dehydrocholate aqueous solutions

The evaporation through the air/solution interface of sodium dehydrocholate (NaDHC) aqueous solutions was studied by surface tension and microbalance measurements. The evaporation rate was related to the aggregation processes in the bulk, but not with the adsorption monolayer compactness. Except for very dilute solutions the air/solution interface was saturated by NaDHC molecules, giving rise to a strongly nonideal monolayer. At very low concentration, the adsorbed monolayer behaved as an ideal two-dimensional gas. The results were in agreement with previous research results.     

Simple and highly sensitive determination of free fatty acids in human serum by high performance liquid chromatography with fluorescence detection.

A highly sensitive and simple reversed phase high performance liquid chromatographic (HPLC) method for the quantitative determination of free fatty acids in human serum is presented. The method is based on the direct derivatization of serum fatty acids with 6,7-dimethoxy-1-methyl-2(1H)-quinoxalinone-3-propionylcarboxylic acid hydrazide. The derivatization reaction proceeds in aqueous solution in the presence of pyridine and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide at 37 degrees C. The resulting derivatives are separated within 75 min on a reversed phase column (YMC Pack C8) with a gradient elution of aqueous acetonitrile and detected fluorimetrically. The detection limits are 2.5-5 fmol in a 10 microL injection volume. The sensitivity permits precise determination of free fatty acids in 5 microL serum. The method is simple and is without the conventional liquid-liquid extraction steps of serum fatty acids.     

碳酸镉饱和溶液作标准用便携式AAS测定镉的研究

以CdCO3固体溶于煮沸冷却的去离子水中配制成饱和溶液,将该饱和溶液稀释成标准溶液系列用于便携式钨丝电热原子吸收光谱仪野外实时与在线分析环境水样中痕微量镉。经测定在25℃该饱和溶液中镉的浓度为272μg.L-1,与理论计算值279μg.L-1有很好的吻合。实验优化了相关的仪器条件和实验条件,在最优的条件下该方法的线性相关系数为0.9948,检出限为0.08μg.L-1。通过检测分析环境中的水样验证了该方法是可行的。     

Biomaterials obtained by gelation of silica precursor with CO<Subscript>2</Subscript> saturated water containing a carbonic anhydrase enzyme

As part of an effort to develop biomaterials for the capture of CO₂ catalyzed by a carbonic anhydrase enzyme, the effects of an aqueous CO₂ saturated solution and a carbonic anhydrase on the gelation and texture of SiO₂ gels derived from tetramethoxysilane (TMOS), were studied. Both aqueous CO₂ and the enzyme were found to accelerate the gelation of silica, with a stronger effect when both the enzyme and CO₂ saturated aqueous water, were used. According to the gel texture data, aqueous CO₂ acted as an acid type catalyst, while the carbonic anhydrase acted as a weak base type catalyst. Moreover, a gel with a more granular visual aspect was obtained when both the enzyme and CO₂ saturated water were used. The latter characteristic was consistent with a double action of the enzyme, first as a gelation catalyst on the silica precursor, secondly as a reverse protonation catalyst which accelerated the back nucleation of CO₂ gas bubbles from aqueous HCO₃ ⁻ anions.     

Electrochemical impedance spectroscopy studies of organic-solvent-induced permeability changes in nanoporous films derived from a cylinder-forming diblock copolymer

In this paper we report electrochemical investigations of the influence of organic solvents dissolved in aqueous solution on the permeability of nanoporous films derived from a cylinder-forming polystyrene-poly(methyl methacrylate) diblock copolymer (CF-PS-b-PMMA). The nanoporous films (ca. 30 nm in pore diameter) were prepared on planar gold electrodes via UV-based degradation of the cylindrical PMMA domains of annealed CF-PS-b-PMMA films (30-45 nm thick). The permeability of the electrode-supported nanoporous films was assessed using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The faradic current of Fe(CN)(6)(3-/4-) decreased upon immersion in aqueous solutions saturated with toluene or methylene chloride (5.8 mM and 0.20 M, respectively). EIS data indicated that the decrease in faradic current mainly reflected an increase in the pore resistance (R(pore)). In contrast, R(pore) did not change in a saturated n-heptane solution, 0.17 M ethanol, or 5.8 mM aqueous solutions of methylene chloride, diethyl ether, methyl ethyl ketone, or ethanol. Atomic force microscopy images of a nanoporous film in aqueous solution with and without 5.8 mM toluene showed a reversible change in the surface morphology, which was consistent with a toluene-induced change in R(pore). The solvent-induced increase in R(pore) was attributed to the swelling of the nanoporous films by the organic solvents, which decreased the effective pore diameter. The reversible permeability changes suggest that the surface of CF-PS-b-PMMA-derived nanoporous films can be functionalized in organic environments without destroying the nanoporous structure. In addition, the solvent-induced swelling may provide a simple means for controlling the permeability of such nanoporous films.     

The Use of Isothermal Heat-Conduction Calorimetry in Direct Measurements of Solvent Vapor Pressure

Principles for applying isothermal heat-conduction calorimetry for direct studies of vapor/liquid equilibria are presented. The ideas have been tested by measurements of the vapor pressure of water over aqueous NaCl(aq) solutions at 25°C. Seven different stock solutions were used with a composition ranging from 0.0879 mol-kg^–1 to saturated solution. The imprecision and inaccuracy were not dependent on the composition and were found to be about ±2 Pa over the entire composition range. The sample solution was placed in a container separated from the pure solvent which was kept in the calorimetric cell. Solvent vapor was transported isothermally between the container and the cell by means of an inert carrier gas. The vapor pressure was evaluated by measuring the heat-flow rate associated with the process where the vapor equilibrated with a NaCl(aq) solution is fully saturated by passing through pure solvent. Corrections for treating vapor phase imperfections are presented. The method was found to be fast, accurate, and easy to use. The concept developed here can easily be applied in any commercial heat-conduction calorimeter of modular design.