低温下溶胶凝胶法制备TiO2纳米晶

从含过量水的溶胶出发,在室温下得到了TiO₂纳米晶。通过红外光谱,透射电子显微镜法和X射线粉末衍射法对含有过量水的溶胶体系中TiO₂纳米晶的室温形成机理进行了研究。与传统的溶胶凝胶法相比,在改良的溶胶凝胶体系中,在缩聚反应之前由于水过量使得钛的先驱体快速且充分的水解,从而生成[TiO₆]基团,随之形成TiO₂纳米晶。晶粒的尺寸为约3.5 nm,该法得到的TiO₂纳米晶比传统溶胶凝胶法得到的TiO₂纳米晶和商用光催化剂德固赛P25具有更好的光催化活性。     

溶胶-凝胶法制备纳米二氧化钛颗粒的研究

本文采用钛酸丁脂等原料,利用sol-gel方法制备了TiO2纳米颗粒.研究了不同实验顺序(滴入方式)和工艺参数对制备效果的影响.通过实验和对TiO2纳米粉末的TEM分析,获得了粒度(30-40nm)比较均匀的球型TiO2纳米颗粒.     

溶胶-凝胶法合成β-SiC超细粉末

引言目前文献报道的溶胶法合成β-SiC超细粉末多以TEOS(Si(OC_2H_5)_4)和/或PTES(C_6H_5Si(OC_2H_5)_3)等有机硅和碳的化合物为原料,经溶胶-凝胶过程制SiC先驱体,然后在惰性气氛中热解合成.由于所用原料价格较贵,制备出的SiC粉末成本高,难以实现工业化生产.本文旨在探讨采用廉价硅源来制备β-SiC超细粉末的可行性,以加速我国SiC高技术材料的研究和应用.     

CaTiO3纳米粉体溶胶-凝胶法合成、表征及介电特性

采用无机盐溶胶-凝胶法制备了CaTiO₃纳米粉体，采用TG-DTA、XRD、TEM等技术进行了表征，并探讨了CaTiO₃纳米粉体烧结特性及介电效应。结果表明，干凝胶800 ℃低温煅烧可获得粒径分布较窄、平均粒径为60～70 nm的单相CaTiO₃纳米粉。纳米CaTiO₃粉具有较大的比表面积，使作为粉体烧结驱动力的表面能剧增，促使CaTiO₃在1 200 ℃实现致密烧结，比固相法制备的微米粉烧结降低100～200 ℃，且具有较宽的烧结温区。与微米级粉体烧结体介电特性相比，纳米粉具有更高的Q_f值。纳米CaTiO₃粉制备的陶瓷在1 250 ℃烧结2 h，获得优良的介电性能：ε_r=172，Q_f=4 239 GHz，τ_f=+7.68 × 10^-4 ℃^-1。     

溶胶-凝胶法制备纳米WO3气致变色材料

本文主要阐述了纳米WO₃气致变色材料的溶胶-凝胶制备方法、气致变色机理及其应用的研究新进展,重点评述了溶胶-凝胶法中各种制备条件诸如掺杂、模板剂、溶剂、热处理温度等对这种材料的结构和性能的影响,最后展望了纳米WO₃气致变色材料的研究和应用前景。我们认为,在未来的溶胶-凝胶法制备纳米WO₃气致变色材料领域,如何进行最优化的掺杂设计和选择高效模板剂、如何降低气体检测温度、以及气致变色机理等将是该项研究的重点。     

荧光素掺杂的TiO2凝胶的制备及光谱研究

近些年来,溶胶－凝胶（Ｓｏｌ－Ｇｅｌ）方法作为一种软化学合成方法具有很多优点［１］,例如制作简单、烧结温度低,制得样品稳定、坚韧,制备灵活性高等。作为一种常用的染料,荧光素（ＦＬ）常用于研究非线性光学。利用Ｓｏｌ－Ｇｅｌ法可以很好地将染料分子固定在光...     

纳米SnO2的非水溶剂溶胶-凝胶法制备与表征

Nanometer SnO₂ powders were successfully prepared by non-hydrolytic sol-gel approach combined with heat treatments using tin tetrachloride as starting material and ethylene glycol as solvent. The reaction mechanism of the sol-gel process is proposed. Results indicate that the -OHCH₂CH₂OH- prevent Cl^- ion from accessing to tin Sn⁴⁺ due to steric effect, and hence increaseing the stability of the sol solution. Ethylene glycol functions not only as a complextion agent to form a polymer network but also as a “spacer” to modulate the distance between metal ions, preventing metal oxide particles from aggregation during desiccation of the sol. The effects of heat treatments on the evolution of structure and morphology of nanosized SnO₂ powders were studied. The powders with narrow size distribution around 15～20 nm could be obtained at 500 ℃ for 4 h.     

Si掺杂TiO2纤维的溶胶-凝胶法制备及其光催化活性

采用溶胶-凝胶法并结合水蒸气活化制备了Si掺杂TiO₂纤维, 通过TG-DSC, XRD, FT-IR, UV-Vis-DRS, N₂吸附-脱附, SEM等手段对纤维样品的结构参数及其表面形貌进行了表征, 并以活性艳红X-3B模拟废水体系评价了其光催化活性．结果表明, 与纯TiO₂产物相比, 适量Si掺杂制得的产物是具有丰富介孔结构的TiO₂长纤维, 不仅热稳定性和晶型稳定性俱佳, 而且光催化活性得以显著提高, 经900 ℃热处理后仍能保持结晶完好的锐钛矿相; 在Si/Ti摩尔比为0.15时, 其比表面积和孔容最大, 光催化活性最佳, 该纤维作为光催化剂反应75 min, 水中X-3B的降解率可达99.6%.     

Si掺杂TiO2纤维的溶胶-凝胶法制备及其光催化活性

采用溶胶-凝胶法并结合水蒸气活化制备了Si掺杂TiO₂纤维, 通过TG-DSC, XRD, FT-IR, UV-Vis-DRS, N₂吸附-脱附, SEM等手段对纤维样品的结构参数及其表面形貌进行了表征, 并以活性艳红X-3B模拟废水体系评价了其光催化活性．结果表明, 与纯TiO₂产物相比, 适量Si掺杂制得的产物是具有丰富介孔结构的TiO₂长纤维, 不仅热稳定性和晶型稳定性俱佳, 而且光催化活性得以显著提高, 经900 ℃热处理后仍能保持结晶完好的锐钛矿相; 在Si/Ti摩尔比为0.15时, 其比表面积和孔容最大, 光催化活性最佳, 该纤维作为光催化剂反应75 min, 水中X-3B的降解率可达99.6%.     

溶胶-凝胶法制备功能陶瓷超微粉末

陶瓷超微粉末的研究是目前高技术领域中的一项重要课题。溶胶-凝胶法是近几年来才开发的一种制备陶瓷超微粉末的新技术。应用该方法所合成的粉末纯度高、化学成份均匀、颗粒度小且分布范围窄,易烧结成致密的陶瓷体,尤其对于多元陶瓷粉末的制备这些优点更为突出。因而对该方法的研究及应用已引起人们的普遍重视。PbTiO_3、BaTiO_3和Pb(Zr,Ti)O_3作为陶瓷压电材料广泛应用于电子信息技术和光电技术领域;有关它们的研究报道甚多。     

TiO2/蒙脱石纳米复合物中TiO2的结构相变

以钛酸丁酯和季铵盐改性有机蒙脱石为原料,采用原位水解法和原位脱羟法制备了TiO2/蒙脱石纳米复合物。采用X射线衍射(XRD)、拉曼光谱(Raman)表征了不同焙烧温度下TiO2/蒙脱石纳米复合物中TiO2的结构相变,并与不同焙烧温度下纯TiO2的结构相变进行对比。结果发现TiO2/蒙脱石纳米复合物中TiO2从锐钛矿相开始转变为金红石的最低温度要比纯TiO2从锐钛矿开始相转变为金红石的最低温度高200℃,且在焙烧温度1 200℃时还存在锐钛矿相,而纯TiO2在焙烧温度800℃时就全部转换为金红石相。TiO2/蒙脱石纳米复合物中TiO2和纯TiO2的平均晶粒度都随焙烧温度升高而增大,但TiO2/蒙脱石纳米复合物中TiO2的平均晶粒度要小于相同温度下焙烧纯TiO2的平均晶粒度。表明蒙脱石结构层的硅氧结构抑制了TiO2晶型由锐钛矿相向金红石相的转变,进而使相变温度升高,同时阻碍了晶体的生长。     

SnCl4对纳米二氧化钛晶相结构的低温转变控制研究

采用二种方法制备了低温下晶相结构可控制转变的纳米二氧化钛。一种方法是采用乙醇作溶剂的溶胶-凝胶法,通过控制SnCl₄的添加量,便可在450℃热处理下实现纳米TiO₂从纯锐钛矿到不同比例的复合相直至纯金红石相的转变。另一种方法是采用钛酸丁酯为原料直接低温水解,通过加入不同量的SnCl₄,制备了具有晶态结构的二氧化钛复合溶胶,在120℃下干燥处理便可实现TiO₂从锐钛矿到不同比例的复合相(金红石型、锐钛矿型和板钛矿型)直至纯金红石相的转变,制备所需晶态结构的纳米TiO₂。所有样品进行了透射电镜与XRD表征,制备的纳米TiO₂及其TiO₂-SnO₂纳米复合材料颗粒小、分布均匀、分散性好,没有检测到SnO₂晶体的X-衍射特征峰。     

湿化学法合成纳米ZrB2粉末

本文利用ZrO2-B2O3-C体系中碳热还原的基本原理,分别使用正丙醇锆(Zr(OC3H7)4)、硼酸(H3BO3)和蔗糖(C12H22O11)为原料,采用溶胶-凝胶法合成了ZrB2纳米粉末。在实验设计过程中,首先使用化学修饰剂乙酰丙酮(acac)修饰Zr(OC3H7)4,目的是防止Zr(OC3H7)4的快速水解;其次,选用蔗糖作为碳源,是考虑到蔗糖热解时可以完全分解为碳,这样可以准确计算热解过程碳的生成量。结果表明:当起始原料nB/nZr=2.3、热解温度为1550℃时,通过溶胶-凝胶法可以成功合成单相ZrB2纳米粉末。分布均匀的颗粒形貌呈等轴状,平均尺寸约50 nm。     

单斜与锐钛矿双晶相TiO2的水热法制备与机理探讨

以一种具有超强耐酸碱的表面活性剂-丁基封端脂肪醇聚氧乙烯醚作为晶型调节剂,利用钛酸丁酯和氢氧化钠的水热反应制备了双晶相(单斜相与锐钛矿相)TiO2,考察了丁基封端脂肪醇聚氧乙烯醚和钛酸丁酯的物质的量比R、反应时间、反应温度等因素对产物的晶相组成的影响,并对不同条件下的晶相转变机理进行了初步探讨。     

EDTA配合法制备beta-Al_2O_3固体电解质

以金属硝酸盐和乙二胺四乙酸(EDTA)为原料,采用EDTA配合溶胶-凝胶法制备了beta-Al2O3前驱粉料,并利用X射线衍射分析(XRD)、红外光谱分析(FTIR)、热分析(TG/DSC)、交流阻抗谱(EIS)和扫描电镜(SEM)等测试技术对beta-Al2O3的合成工艺进行了详细的研究。结果表明:该法合成beta-Al2O3前驱粉料的温度为1150℃,比固相反应法低了150℃,平均粒径约为42nm,具有较好的成型和烧结性能。将素坯在1630℃保温烧结,得到的烧结体相对密度为96%以上,300℃时beta-Al2O3固体电解质的离子电导率为0.026S·cm-1。     

正钛酸胶溶法制纳米TiO2薄膜及性能表征

The Nanometer TiO₂ thin film was prepared by sol method with titanic acid precursor from industrial TiOSO₄ solution. The characters of the sol and the factors affecting sol formation were investigated by ζ electricity potential. The crystalline structure, particle size, appearance shape and photo-catalytic activity were characterized by XRD, SEM, TEM and spectrophotometer. The study show: (1) pH value and HNO₃concentration effected importantly on the forming process and stability of the sol. The thermodynamic condition for forming sol is pH=0.5～1.5. The lower the HNO₃concentration,the more stable the sol. The ζ electricity potential of the sol, with 5% HNO₃as gluing reagent, was up to 48 mV, and shelf life of the sol could more than 10 months. (2) The film, made from the sol and crystallized at 400 ℃, had the characters of anatase structure and crystal size of 18.5 nm by XRD analysis. The SEM imagines show that TiO₂ film was with the characteristics of tight surface structure, The TEM imagine showed the mean particle size is about 20 nm. The photo-degrading test data indicate that the photo-degrading rate to methyl orange solution of 20 mg·L^-1 was more than 84% in 5 hours.     

Synthesis of titanate, TiO2 (B), and anatase TiO2 nanofibers from natural rutile sand

Titanate nanofibers were synthesized by hydrothermal method (150 °C for 72 h) using natural rutile sand as the starting materials. TiO₂ (B) and anatase TiO₂ (high crystallinity) nanofibers with the diameters of 20-100 nm and the lengths of 10-100 μm were obtained by calcined titanate nanofibers for 4 h at 400 and 700 °C (in air), respectively. The samples characterized by XRD, SEM, TEM, SAED, HRTEM, and BET surface area. This synthesis method provides a simple route to fabricate one-dimensional nanostructured TiO₂ from low cost material.     

Photocatalytic activity of TiO2/SnO2/Pt prepared by the sol-gel method

This investigation compares the photodegradation performance of C.I. Reactive Red 2 (RR2) in single- and coupled-photocatalyst systems. The photocatalysts were produced via the sol-gel method. PEG and Pt addition increases the decolorization rate (1.6–2.12 h⁻¹), the amount of sulfate released and the DOC reduction percentage in coupled photocatalyst systems the cause of PEG improving the homogeneity of the final product and incorporating Pt into the lattice reduced the band gap of photocatalysts.     

Thermally Induced Phase Transformation on 12-Tungstophosphoric Acid/ZrO2 Sol-Gel

Zirconium (IV)-n-butoxide and tungstophosphoric acid (WP) were co-gelled at pH 3, 5 and 7 with HCl acid, C₂H₄O₂ acid and NH₄OH, respectively. Pyridine adsorption bands at 1610 and 1442 cm^–1 corresponding to Lewis acidic sites were observed by FTIR spectroscopy. Acidity determined by ammonia thermodesorption shows values around 1100 mol of NH₃/g, which correspond to solids showing super acidity. It was found that the incorporation of WP to gelling zirconia delay the formation of tetragonal zirconia. Raman spectroscopy shows the stabilization of the Keggin structure on zirconia thermally treated at 400°C.