Effect of ionizing radiation on epoxy oligomers of different structures and manufacture of new promising materials on their base

The paper presents generalised data from scientific publications and experimental results obtained by the author in the course of long-term research activities. The author proposes the mechanisms of radiation-chemical transformations in epoxy oligomers of different structures and compositions on their base and gives general recommendations for predicting radiation stability of hardened epoxy composites and using the modified epoxy oligomers in radiation technology.     

A modified and a new straight-line method for determining the composition of weak complexes of the form AmBn

A modified Asmus method and a new method are described for determining the composition and stability of weak complexes of the form A_mB_n. The modified method is applicable to polynuclear complexes and is not based on the approximation necessary originally. The second method is based on variation of the concentration of the reactant being maintained in excess. The method gives a straight line for the correct quotient of n/m and the stability constant can easily be calculated from data extracted from the diagram. The main advantage is that, in combination with the original straight-line method, this method permits the determination of both coefficients m andn in the presence of an excess of one of the reactants     

Nickel–poly(o-aminophenol)-modified carbon paste electrode; an electrocatalyst for methanol oxidation

In this work, a modified carbon paste electrode consisting of Nickel dispersed in poly(ortho-aminophenol) was used for electrocatalytic oxidation of methanol in alkaline solution. A carbon paste electrode bulk modified with o-aminophenol was used for polymer preparation by cyclic voltammetry method; then, Ni(II) ions were incorporated by immersion of the modified electrode in 1 M Ni(II) ion solution at open circuit. The electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)–Ni(II) couple. Electrocatalytic oxidation of methanol on the surface of modified electrode was investigated with cyclic voltammetry and chronoamperometry methods, and the dependence of the oxidation current and shape of cyclic voltammograms on methanol concentration and scan rate were discussed. Also, long-term stability of modified electrode for electrocatalytic oxidation of methanol was investigated.     

Surface modification of poly(dimethylsiloxane) microfluidic devices and its application in simultaneous analysis of uric acid and ascorbic acid in human urine

A novel and simple method based on layer-by-layer (LBL) technique has been developed for the modification of the channel in PDMS electrophoresis microchip to create a hydrophilic surface with a stable EOF. The functional surface was obtained by sequentially immobilizing chitosan and deoxyribonucleic acid (DNA) onto the microfluidic channel surface using the LBL assembly technique. Compared to the native PDMS microchips, the contact angle of the chitosan-DNA modified PDMS microchips decreased and the EOF increased. Experimental conditions were optimized in detail. The chitosan-DNA modified PDMS microchips exhibited good reproducibility and long-term stability. Separation of uric acid (UA) and ascorbic acid (AA) performed on the modified PDMS microchip generated 43,450 and 46,790 N/m theoretical plates compared with 4048 and 19,847 N/m with the native PDMS microchip. In addition, this method has been successfully applied to real human urine samples, without SPE, with recoveries of 97-105% for UA and AA.     

Amperometric immunosensors based on layer-by-layer assembly of gold nanoparticles and methylene blue on thiourea modified glassy carbon electrode for determination of human chorionic gonadotrophin

Nano-Au and methylene blue (MB) were assembled layer-by-layer (LBL) into films on the glassy carbon electrode modified by thiourea for detection of human chorionic gonadotrophin (HCG). The electrode modification process was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron micrograph (SEM). The factors influencing the performance of the amperometric immunosensor were studied in detail. Tests performed with this immunosensor showed good linearity, the working range for the system was 1.0–100.0 mIU/mL with a detection limit of 0.3 mIU/mL at 3σ. Moreover, the studied immunosensor exhibited high sensitivity and long-term stability. The present work supplied a promising test method for clinical immunoassay.     

A modified method using static head-space gas chromatography for determining the stability constants of 1-alkanol/alpha-cyclodextrin complexation

A modification of the conventional static head-space gas chromatography method (SHSGC method) to determine stability constants for 1-alkanol/alpha-CD inclusion complexes was investigated. The 1 : 1 stability constants determined by this modified SHSGC method are in reasonable agreement with the corresponding values reported previously. The modified SHSGC method precludes the necessity of the calibration curve by the use of Henry's law constant of guest. Consequently, the modified SHSGC method is more advantageous than the conventional SHSGC method because the experimental time required for determination of the stability constant is markedly reduced.     

Determination of microcystin-LR with a glassy carbon impedimetric immunoelectrode modified with an ionic liquid and multiwalled carbon nanotubes

We report on a sensitive, simple, label-free impedance-based immunoelectrode for the determination of microcystin-LR (MCLR). The surface of the electrode was modified with a composite made from multiwalled carbon nanotubes and an ionic liquid, and with immobilized polyclonal antibody against MCLR. Cyclic voltammetry and impedance spectroscopy were applied to characterize the modified electrode. It is found that the multi-walled carbon nanotubes act as excellent mediators for the electron transfer between the electrode and dissolved hexacyanoferrate redox pair, while the ionic liquid renders it biocompatible. The method exhibits a wide linear range (0.005 μg?L-1 to 1.0 μg?L-1), a low detection limit (1.7 ng?L-1) and a long-term stability of around 60 days. The ionic liquid 1-amyl-2,3-dimethylimidazolium hexafluorophosphate gave the best impedimetric response. The new immunoelectrode is sensitive, stable, and easily prepared. It has been successfully applied to the determination of MCLR in water samples.

Design and evaluation of a new phase separator for liquid-liquid extraction in flow systems

A modified phase separator incorporating a supported teflon membrane is described. The separator has very high phase-separation efficiency even under extreme conditions of phase-volume ratio and total flow rate. The use of appropriate support is shown to give much better endurance to the membrane. Even pressures high enough to make water penetrate the membrane did not cause any damage, which makes the system much easier to handle. The long-term stability of the separator was found to be good and very little of the aqueous phase penetrated the membrane.     

Green synthesis and characterization of cobalt oxide nanoparticles and its electrocatalytic behavior

Green synthesis of pure cobalt oxide nanoparticles (CoO-NPs) in aqueous medium has been carried out using gelatin. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The particles have been characterized using X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM), energy dispersive X-ray (EADX), and thermogravimetric analysis (TGA). TEM image shows the formation of CoO-NPs with average particle size of 28 nm which agrees well with the XRD data. Cobalt oxide nanoparticles modified carbon paste electrode (CoO-NPs/CPE) displayed excellent electrochemical catalytic activities towards the oxidation of glucose. The electrocatalytic response showed a wide linear range of 7–1000 µM, as well as its experimental limit of detection can be achieved 5.3 µM. The modified electrode for glucose determination is of the property of simple preparation, good stability and high sensitivity.     

Nanomolar Detection of Glutamate at a Biosensor Based on Screen-Printed Electrodes Modified with Carbon Nanotubes

The amperometric glutamate biosensor based on screen-printed electrodes containing carbon nanotubes (CNT), and its integration in a flow injection analysis system, is described herein. The sensor was fabricated by simply adsorbing enzyme glutamate oxidase (GlutOx) on a commercial substrate containing multi-wall CNT. The resulting device displayed excellent electroanalytical properties toward the determination of L-glutamate in a wide linear range (0.01-10 μM) with low detection limit (10 nM, S/N≥3), fast response time (≤5 s), and good operational and long-term stability. The CNT modified screen-printed electrodes have a potential to be of general interest for designing of electrochemical sensors and biosensors.     

PEG-ylated cationic CdSe/ZnS QDs as an efficient intracellular labeling agent

Quantum dots (QDs) have size-tunable optical properties, such as photostability, strong photoluminescence and a large Stokes-shift, which make it possible to adapt them to various biological applications. In many cases, surface modification of QDs by carboxylate ligands has been extensively studied. However, there have been few applications on QDs modified with a potential cationic ligand such as amine. In this study, we synthesized robust amine-functionalized QDs and modified their surface with poly(ethylene glycol) for long-term stability. These QDs showed an excellent stability over a broad pH-range and remarkable internalization efficiency into living cells.     

An investigation of the hydrophobic property stability of grafted polymeric coatings on a cellulose material surface

Modification of cotton fabric surface by random or block copolymers of glycidyl methacrylate and lauryl methacrylate is studied. It is shown that a cotton fabric surface modified in such a way takes on superhydrophobic properties and differs in stability under long-term contact with aqueous media.     

多产低碳烯烃及柴油用分子筛的设计

目前,催化裂化的原料大多是蜡油和减压渣油的混合油,或全部的常压渣油 .其相对分子量范围很宽,组成十分复杂 .为了分别对待大小不同的分子和不同碳氢比化合物的裂化性能,现代催化裂化催化剂应具有梯度孔结构与梯度酸中心的优化结构配置 .而目前催化裂化的主导分子筛 USY二次孔含量还不能满足原料油日趋变重的需求,并且滞留在分子筛孔 /笼内的非骨架铝限制了其选择性的进一步提高,因此有必要对其结构进一步修饰 .　　本研究在 USY基础上合成新的催化裂化多产低碳烯烃和柴油用分子筛催化剂 .新型 USY基分子筛从晶体结构、孔容及孔…     

MODIFICATION OF SILK FIBER via EMULSION GRAFT COPOLYMERIZATION WITH FLUOROACRYLATE

2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto ...     

Gold Microelectrodes Decorated by Spike-Like Nanostructures as a Promising Non-Enzymatic Glucose Sensor

Gold microelectrodes modified via easy method by gold nanostructures were studied as an ideal substrate for non-enzymatic glucose detection. The results confirmed that spike-like nanostructure displays the best electrocatalytic activity because of higher amount of edges. Results prove that modified electrode is able to detect glucose in two linear ranges from 100–500 μM and 0.5–30 mM, with limit of detection (48 μM), high sensitivities for both linear ranges (1.7 μA/mM and 2.4 μA/mM), and good stability. In addition, modified electrodes were able to detect glucose in blood serum. This work demonstrates glucose detection on miniaturised system.     

In-line flow injection analysis for monitoring lactic acid fermentations

An automated system with in-line monitoring of important fermentation variables is described for investigating the kinetics of lactic acid fermentation. A laboratory fermentor is fitted with a continuous sample-withdrawal system and in-line analyzers are used to determine glucose, lactic acid, protein and cell density (from absorbance at 565 nm). The system is controlled by a personal computer. The flow injection analyzers for glucose and lactic acid are based on enzymatic oxidation followed by chemiluminescence detection. The flow-injection analyzer for protein is based on the biuret method. The system has a very good reproducibility and long-term stability. It appears to be ideally suited for the study of fermentation dynamics.     

Steady surface modification of polydimethylsiloxane microchannel and its application in simultaneous analysis of homocysteine and glutathione in human serum

A novel polydimethylsiloxane (PDMS) surface modification method for microchip electrophoresis has been developed to make a stable and sufficient electroosmotic flow (EOF). Poly(l-glutamic acid) (PGA) which had ionizable carboxyl groups at a high pH-range was immobilized on the surface of microchannel fabricated with PDMS. The surface modification involved surface oxidation by plasma, the silanization of 3-aminopropyldimethylethoxysilane (APDMES) and immobilization of PGA via amide bond. The modified channel was extremely stable against consecutive electric power supply over 5h, and its long-term stability was demonstrated by the efficient separation of four amino acid derivatives reproducibly after a week. Additionally, homocysteine (Hcy), important risk factor of cardiovascular disease, osteoporosis and problems in pregnancy, was successfully measured in human serum in modified PDMS channel with the other thio amino acid simultaneously.     

Stability of a new class of unnatural hydrogen-bonded molecular duplexes: A computational study

The stability of a series of hydrogen-bonded duplexes was studied using molecular mechanics method with a modified AMBER GAFF force field, in which the original atomic charges were replaced by ones that are more appropriate for non-polar solvents. The free energy change of dimerization was calculated in vacuo and good agreement with experimental data was found. It is also shown that the stability of these duplexes increases linearly with the number of hydrogen bonds, in agreement with experimental data.     

Preparation and Electrochemiluminescence of a Graphene Oxide/Selenium Nanocomposite

A novel amplification system for electrochemiluminescence (ECL) was developed by combining graphene oxide (GO) and Se nanoparticles, in which the chitosan (CHIT) was used as improver. Based on a series of experiments, the influencing factors and mechanism for ECL emission were determined. Under optimal conditions, the GO/Se nanocomposite produced an intense ECL emission and maintained long-term ECL stability. Significantly, the electrode modified with GO/Se nanocomposite was used to detect the biomolecule dopamine (DA), and showed a linear range from 0.1 to 100 µM, with a detection limit of 0.025 µM.     

Surface modification with phosphoric acid of SiO2/Nb2O5 prepared by the sol-gel method: structural-textural and acid sites studies and an ion exchange model

In this work, the structural and textural properties of the SiO2/Nb2O5 system prepared by the sol-gel method and then modified by phosphoric acid were studied. The different materials were prepared, with three different mol % Nb2O5 (2.5, 5.0, and 7.5 mol %), and calcined in the temperature range of 423-1273 K. BET specific surface area determinations, scanning electron microscopy connected to a X-ray emission analyzer, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used for the investigation. For the lowest temperature of calcination (423 K), the mesopores and micropores of the modified material were blocked, resulting in a decrease of the specific surface area compared to the SBET values obtained for the SiNb matrix. Under intermediate temperatures of calcination (423-873 K), the modified material acquired textural stability. By XPS analysis, the presence of the dihydrogenphosphate species was identified, the P/Nb atomic ratios being independent of the thermal treatment. 31P magic angle spinning NMR confirmed the XPS data and also showed that the chemical shift of the (H2PO4)- ions strongly depended on the crystallization degree of the Nb2O5. Structural thermal stability was also shown by the presence of Br?nsted acid sites in the modified material calcined at high temperature (1273 K). The thermal stability is directly associated with obtainment of the same value for K+ exchange capacity (0.74 mmol g(-1), average value) for the modified materials calcined at 423 and 1273 K. The chemical analyses of phosphorus for the modified materials were made by using the inductively coupled plasma. The value was 0.36 mmol g(-1), corroborating the presence of (H2PO4)- ions. The ion exchange isotherms presented an S-shaped form characteristic of energetically heterogeneous ion exchangers, permitting application of a model of fixed polydentate centers, in which ion exchange took place.