Kinetic Spectrophotometric Determination of Vanadium (V) Based on its Inhibitory Effect on the Thionine – Ascorbic Acid Reaction

ABSTRACT

A simple and sensitive kinetic method for the determination of vanadium(V) based on its inhibitory effect on the reduction of thionine by ascorbic acid at pH=5 is described. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 598 nm after a fixed time (10 min). The calibration graph is linear in the range of 10 ? 120 ng ml^?1 of vanadium(V) and the detection limit is 6 ng ml^?1. The relative standard deviation (RSD) for 80 ng ml^?1 of V(V) was 0.96% (n=10). The method was successfully applied to the determination of vanadium in a certified reference sample.     

Direct determination of biacetyl in fats by sensitized room temperature phosphorescence

A direct method for the determination of biacetyl in butter and margarine by sensitized room temperature phosphorescence (SRTP) is described. After dissolution of the sample in hexane, biacetyl is isolated by distillation, and its native phosphorescence is sensitized by a non-polar linear furocoumarin, 4′5′-dihydro-3-carbethoxypsoralen. The limit of detection is 0.05 ng ml^?1 biacetyl, with a linear response from 1 × 10^?4 to 1 μg ml^?1 (r = 0.999). The RSD is 3.5% at 100 ng ml^?1.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.     

Flow Injection with an Integrated Retention/Photometric Detection Unit for the Determination of Iron in Water

An integrated retention/photometric detection method for the determination of microamounts of iron was developed. The method is based on the retention of the reaction product of the analyte with ferrozine in a flow cell packed with an anion exchange support, and on the subsequent elution of the retained complex with a solution of 1.5% sodium peroxide, which allows the reuse of the system. The method is highly selective and has a detection limit (3σ) of 4.3 ng ml⁻¹. Iron was thus determined in the range 10–200 ng ml⁻¹with a relative standard deviation of 1–3% (n= 11). The method was applied to the determination of iron in tap and river water and the results were consistent (2%) with those provided by AAS.     

Flame atomic absorption spectrometric determination of Cd(II), Ni(II), Co(II) and Cu(II) in tea and water samples after simultaneous preconentration of dithizone loaded on naphthalene

A simultaneous preconcentration procedure for the determination of Cd(II), Ni(II), Co(II) and Cu(II) by atomic absorption spectrometry is described. The method is based on solid phase extraction of the metal ions on dithizone loaded on naphthalene in a mini-column, elution with nitric acid and determination by flame atomic absorption spectrometry. The sorption conditions including NaOH concentration, sample volume and the amount of dithizone were optimized in order to attain the highest sensitivity. The calibration graph was linear in the range of 0.5–75.0 ng ml^?1 for Cd(II), 1.0–150.0 ng ml^?1 for Ni(II), 1.0–150.0 ng ml^?1 for Co(II) and 1.0–125.0 ng ml^?1 for Cu(II) in the initial solution. The limit of detection based on 3S_b was 0.13, 0.32, 0.33 and 0.43 ng ml^?1 for Cd(II), Ni(II), Co(II) and Cu(II), respectively. The relative standard deviations (R.S.D) for ten replicate measurements of 20 ng ml^?1of Cd(II), 100 ng ml^?1 of Ni(II), Co(II) and 75 ng ml^?1 of Cu(II) were 3.46, 2.43, 2.45 and 3.26%, respectively. The method was applied to the determination of Cd(II), Ni(II), Co(II) and Cu(II) in black tea, tap and river water samples.     

Catalytic effect of iron(III) on the oxidation of 2-hydroxybenzaldehyde thiosemicarbazone by hydrogen peroxide : Kinetic Fluorimetric Determination of Iron

A kinetic method is described for the determination of nanogram amounts of iron(III) based on its catalysis of the oxidation of 2-hydroxybenzaldehyde thiosemicarbazone by hydrogen peroxide in an ammoniacal medium. In order to monitor the reaction, the appearance rate of fluorescence of the oxidation product (λ_ex=365 nm, λ_em=440 nm) is measured. The calibration graph is linear in the range 10–60 ng ml^?1 iron(III) with an r.s.d, of ± 1.3%. The proposed method has few interferences and has been applied satisfactorily to the determination of iron in several alloys and minerals. A mechanism for the catalyzed reaction is proposed.     

Cyclodextrin Enhanced Spectrofluorimetric Determination of Melatonin in Pharmaceuticals and Urine

ABSTRACT

Melatonin forms a 1:1 inclusion complex with methyl-β-cyclodextrin with an association constant of 139 ? 30 M^?1 at 20 °C. The effect of several cyclodextrins and derivatives on the fluorescence spectra of melatonin was studied with a great increase of fluorescence signal when methyl-β-cyclodextrin was employed. Optimal conditions of the method were: [methyl-β-cyclodextrin] = 0.01 M and temperature 20 °C; the pH does not affect the luminescence emission. The linear dynamic range (LDR) was 50-3000 ng ml^?1 and a limit of detection of 10 ng ml^?1 of melatonin was obtained with a relative standard deviation (RSD) of 0.77% (at 0.3 μg ml^?1 level). This simple method was satisfactorily applied to the determination of melatonin in pharmaceutical preparations and urine.     

Integrated Retention/Spectrophotometric Detection Method for the Determination of Formaldehyde

Abstract

An integrated-sensor method for the determination of formaldehyde based on retention of the reaction product of the analyte with p-rosaniline and sulfite in a flow-cell packed with Dowex 1-X-8 anion exchange resin was developed. The method has a good selectivity with a detection limit of 0.3 μg ml^?1 (1 ml sample) or 75 ng ml^?1 (2 ml sample), and a linear range between 1–30 μg ml^?1. The relative standard deviations (n = 11) were 2.8 and 1.3% for 2 and 20 μg ml^?1 formaldehyde, respectively. Depending on the working conditions, the sampling frenquency ranged between 10 and 18 h^?1. The method was applied to the determination of formaldehyde in well water.     

Determination of trace amounts of nickel by differential pulse adsorptive cathodic stripping voltammetry using calconcarboxylic acid as a chelating agent

A method for the determination of nickel(II) by stripping voltammetry is described. The method is based on the adsorptive accumulation of nickel(II) calconcarboxylic acid complex onto a hanging mercury drop electrode (HMDE), followed by the reduction of the adsorbed complex using differential pulse voltammetry. The optimum operating conditions and parameters were found to be 0.05 M NH₃/NH₄Cl buffer (pH = 9.5) as the supporting electrolyte, a ligand concentration of 1 × 10^?6 M, accumulation potential of ?0.5 V (vs. Ag/AgCl) and accumulation time of 60 s. At the optimized conditions, the peak current is proportional to the concentration of nickel in the range of 1.7 × 10^?9 to 4.7 × 10^?7 M (0.1–28 ng ml^?1) with a detection limit of 0.05 ng ml^?1. The relative standard deviation (n = 10) at nickel concentrations of 2, 10 and 15 ng ml^?1 varies in the range 0.76 to 2.1%. Possible interferences by metal ions, which are of great significance in real matrices, have been studied. The method was successfully applied to the determination of nickel content in a chocolate sample.     

Square-wave cathodic adsorptive stripping voltammetric determination of trace amounts of 2-mercaptobenzimidazole in water samples

A sensitive, simple and reproducible square-wave cathodic adsorptive stripping voltammetric method is developed for the determination of 2-mercaptobenzimidazole (MBIM) in different water samples using a static mercury drop electrode (SMDE) as a working electrode. The solution conditions and instrumental parameters were optimized for the determination of MBIM by square-wave cathodic adsorptive stripping voltammetry. This method is based on a sensitive adsorptive reduction peak of the MBIM at ?0.532 V vs. Ag/AgCl reference electrode in a Britton-Robinson buffer at pH 10.0. The linear concentration range was 20–600 ng ml^?1 when using 0.0 V as the accumulation potential. The detection limit of the method was calculated to be 8.41 ng ml^?1. The precision was excellent with relative standard deviations (n = 20) of 2.30%, 1.71%, 2.25% and 1.33% at MBIM concentrations of 40, 90, 200 and 500 ng ml^?1, respectively. The proposed voltammetric method is used for the determination of MBIM in different spiked water samples.     

Simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry after liquid-liquid extraction of the ion pair with zephiramine

A procedure for the simultaneous determination of copper and lead by graphite-furnace atomic absorption spectrometry was investigated by means of a two-channel atomic absorption spectrometer. Both copper(II) and lead(II) are converted into their iodo complex anions and extracted quantitatively into diisobutyl ketone as their ion pairs with tetradecyldimethylbenzylammonium (zephiramine) in a 10-ml centrifuge tube. An aliquot of the organic extract is directly pipetted from the upper layer in the centrifuge tube and injected into the graphite furnace. The detection limits (S/N = 3) are 2.6 ng ml^?1 of copper and 1.0 ng ml^?1 of lead. The relative standard deviations for 10 replicate determinations are 2.9% for 20 ng ml^?1 of copper and 2.7% for 10 ng ml^?1 of lead. Results of analyses of some practical samples are given.     

Solid phase extraction of zirconium as arsenazo(III) complex on agar and spectrophotometric determination

A new solid phase extraction method for the separation and determination of zirconium using agar as an adsorbent is described. The method is based on the adsorption of zirconium as arsenazo(III) complex on agar in a mini-column, elution with sulfuric acid-acetone mixture and determination by spectrophotometry. The effect of different parameters such as pH, concentration of the reagent, eluting reagent, and volume of the sample, amount of the adsorbent and interfering ions was investigated. The calibration graph was linear in the range of 5?C300 ng ml^?1 of zirconium under optimum conditions. The limit of detection based on 3S_b was 1.3 ng ml^?1 and the relative standard deviation (R.S.D) for ten replicate measurements of 15 and 200 ng ml^?1 of zirconium was 3.7 and 1.8%, respectively. The method was applied to the determination of zirconium in water and soil samples.     

Spectrophotometric catalytic determination of ultra-trace amounts of selenium based on the reduction of resazurin by sulphide

A sensitive catalytic method for determining ng ml^? concentration of selenium is described. The method is based on the catalytic action of Se(IV) on the reduction of resazurin by sulphide, monitored spectrophotometrically at 605 nm. The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. The method is simple, rapid, precise, sensitive and widely applicable. As low as 8.0 × 10^?4 μg ml^?1 of selenium can be determined. The relative standard deviation of seven determination of 10 ng Se was 0.7%. The determination of Se(IV) in the presence of Se(VI) and the determination of total selenium are also described.     

A chemiluminescence flow injection system for nitrite ion determination

A chemiluminescence system is described for the determination of nitrite ion based on new designs for an ozone generator, liquid-gas separator and chemiluminescence reaction cell. The method is based on the gas-phase chemiluminescence reaction between ozone and nitric oxide, which is generated from the reduction of nitrite with iodide in sulfuric acid solution. The efficiency of the system was evaluated by investigation of the analytical performance characteristics of the system for nitrite determination in batch and flow injection procedures. Under optimal conditions, the chemiluminescence response of the system was linear against the nitrite concentration over the range 1 to 1 × 10⁴ ng ml^?1 in the batch procedure and 10 to 5 × 10³ ng ml^?1 in the flow injection procedure, with detection limits of 1 and 10 ng ml^?1, respectively. The method is highly selective and allows for the determination of nitrite in the presence of high concentrations of several cationic, anionic and nitrogen containing species. It has been successfully applied to the analysis of nitrite in natural water and soil extracts.     

Cloud point extraction and spectrophotometric determination of amaranth in food samples using nonionic surfactant Triton X-100 and tetrabutylammonium hydrogen sulfate

Cloud point extraction methodology was successfully employed for preconcentration of trace amounts of amaranth prior to its determination by spectrophotometry. The method was based on the extraction of amaranth as an ion pair with tetrabutylammonium ion from aqueous solution using Triton X-100 as non-ionic surfactant. The extracted surfactant rich phase was diluted with ethanol and its absorbance was measured at 518 nm by a spectophotometer. An optimum set of surfactant concentration, pH, equilibration temperature and time, tetrabutylammonium hydrogen sulfate and salt concentration were obtained. The calibration graph was linear in the range of 20–1600 ng ml^?1 of amaranth in the initial solution with r = 0.9993 (n = 12). Detection limit based on three times the standard deviation of the blank (3S_b) was 13.0 ng ml^?1 (n = 10), and the relative standard deviation (R.S.D) for 100 and 1000 ng ml^?1 of amaranth was 4.2 and 1.4% (n = 10), respectively. The proposed procedure was applied to the determination of amaranth in different food samples.     

Determination of arsenic at the picogram level by atomic absorption spectrometry with miniaturized suction-flow hydride generation

A continuous-flow hydride generator is modified and miniaturized for the determination of picogram amounts of arsenic by atomic absorption spectrometry. A 300-μl sample is dropped into a teflon cup and pumped into an alkaline sodium tetrahydroborate stream, which is acidified in a reaction coil. The evolved hydride is swept with argon through a phase separator into an electrically-heated quartz absorption cell and the absorbance is recorded. To eliminate differences in sensitivity between arsenic(III) and arsenic(V) without prereduction by potassium iodide, it is important that arsenic(V) be mixed with tetrahydroborate prior to mixing with hydrochloric acid. The method has a detection limit of 0.08 ng As ml^?1 (24 pg) and the calibrations is linear up to 50 ng As ml^?1. The relative standard deviation for 10 replicate measurements is 5.4% for 0.5 ng As ml^?1. The addition of potassium iodide and hydroxylamine is confirmed to be effective in minimizing some interferences. The sampling rate is 90 h^?1. Results for NBS biological and steel reference materials demonstrate applicability of the technique.     

Spectrophotometric Determination of Diphenadione Via its Metal Complexes

Abstract

Spectrophotometric procedure is described for the quantitative determination of diphenadione [2-(diphenylacetyl)-1,3-indandione], based on direct spectrophotometric measurements of the absorbances of its iron (III), iron (II) and cobalt (II), metal complexes at 488 nm, 505 nm and (334 nm, 372 nm), respectively. The drug reacts with metals in the ratio of 3:1 and 2:1 for iron (III) and for both iron (II) and cobalt (II) respectively. The obtained complexes have apparent molar absorptivities of 1.48 × 10³ 1 mol^?1 cm^?1, 0.714 × 10³ 1 mol^?1cm^?1 and (1.70 × 10³ 1 mol^?1cm^?1, 1.93 × 10³ 1 mol^?1cm^?1) for iron (III), iron (II) and cobalt (II) complexes, respectively. The procedure is suggested for the determination of 51–400 μg.ml^?1 diphenadione via the iron (II) complex and 35–170 μg.ml^?1 diphenadione via both cobalt (II) and iron (III) complexes. The suggested procedure has accuracies of 99.79 ± 0.67%, 99.64 ± 0.37% and (100.09 ± 0.53%, 99.99 ± 0.42%) for the metal complexes of iron (III), iron (II) and cobalt (II), respectively.     

Determination of lead by hydride generation atomic absorption spectrometry in the presence of nitroso-R salt

A method is described for the determination of lead by hydride generation atomic absorption spectrometry in the presence of nitroso-R salt (1-nitroso-2-naphthol-3,6-disulphonic acid, disodium salt). The method is superior in sensitivity to those using peroxodisulphate, dichromate or hydrogen peroxide as oxidants. A characteristic concentration (0.0044 absorbance) of 0.8 ng ml^?1 and a relative standard deviation of 3.8% for 20 ng ml^?1 Pb were obtained. The proposed method has been applied successfully to the determination of lead in certified reference materials.     

Determination of furazolidone in urine by square-wave voltammetric method

A fast, simple and sensitive square-wave voltammetric (SWV) method for the determination of trace amounts of furazolidone (FZ) in urine is reported. A three-electrode system containing stationary mercury dropping (SMDE) working electrode, Pt auxiliary electrode and Ag/AgCl reference electrode was used throughout. Briton-Rabinson buffer solution is used as both pH adjusting agent and supporting electrolyte. The calibration graph showed good linearity in the concentration range of 20–900 ng ml^?1 of furazolidone with a regression coefficient of 0.9996. The equation Δ(i) = 0.0095C_FZ + 0.234 was used for calculation of furazolidone concentration in the sample solution, where C_FZ is the concentration of furazolidone in ng ml^?1 and Δ(i) is the difference between voltammogram peak currents of sample and blank solution. The RSD for 8 replicate measurements of a 60 ng ml^?1 solution and LOD of the proposed method were found to be 2.2% and 5.2 ng ml^?1, respectively. The procedure was successfully applied to the determination of furazolidone in urine samples.     

Fluorimetric determination of chromium at low levels with 3-hydroxyflavone and application of the method to steels

The method is based on a 1:1 Cr(VI)/3-hydroxyflavone complex which is extracted into benzene at H_o = ?0.6. The complex has a pK^* value of 7.8 ± 0.1. Chromium is determined in the range 10–650 ng ml^?1 with excitation at 358 nm and emission measurement at 530 nm. The relative standard deviation is 6.1% for 332 ng ml^?1 chromium (n = 10). The method is applied to the determination of chromium in steels.