QUANTUM YIELDS OF THE LUMINOL CHEMILUMINESCENCE REACTION IN AQUEOUS AND APROTIC SOLVENTS*

Abstract— Quantum yields for luminol (3-aminophthalic hydrazide) chemiluminescence reactions fall into two classes depending on oxidizing conditions. In aprotic solvents the quantum yield is high and the excitation yield which allows for the fluorescence quantum yield of the product, is 0·09 and is unaffected by changes in solution temperature or polarity, or the presence of quenchers. In aqueous solution under optimum pH conditions (11–13), hydrogen peroxide oxidation results in a high chemiluminescence quantum yield with an excitation yield of 0·04 again unaffected by temperature, viscosity or quenchers. Other oxidizing conditions produce lower quantum yields probably by the introduction of competing chemical pathways. The luminol chemiluminescence light standard has been used to calibrate a spectrofluoro-meter with results in good agreement with the quantum yields of the ferrioxalate actinometer and the fluorescence of quinine sulfate and diphenylanthracene.     

Kinetics of two pathways in peroxyoxalate chemiluminescence

It has been shown that 1,1'-oxalyldiimidazole (ODI) is formed as an intermediate in the imidazole-catalyzed reaction of oxalate esters with hydrogen peroxide. Therefore, the kinetics of the chemiluminescence reaction of 1,1'-oxalyldiimidazole (ODI) with hydrogen peroxide in the presence of a fluorophore was investigated in order to further elucidate the mechanism of the peroxyoxalate chemiluminescence reaction. The effects of concentrations of ODI, hydrogen peroxide, imidazole (ImH), the general-base catalysts lutidine and collidine, and temperature on the chemiluminescence profile and relative quantum efficiency in the solvent acetonitrile were determined using the stopped-flow technique. Pseudo-first-order rate constant measurements were made for concentrations of either H2O2 or ODI in large excess. All of the reaction kinetics are consistent with a mechanism in which the reaction is initiated by a base-catalyzed substitution of hydrogen peroxide for imidazole in ODI to form an imidazoyl peracid (Im(CO)2OOH). In the presence of a large excess of H2O2, this intermediate rapidly decays with both a zero- and first-order dependence on the H2O2 concentration. It is proposed that the zero-order process reflects a cyclization of this intermediate to form a species capable of exciting a fluorophore via the "chemically initiated electron exchange mechanism" (CIEEL), while the first-order process results from the substitution of an additional molecule of hydrogen peroxide to the imidazoyl peracid to form dihydroperoxyoxalate, reducing the observed quantum yield. Under conditions of a large excess of ODI, the reaction is more than 1 order of magnitude more efficient at producing light, and the quantum yield increases linearly with increasing ODI concentration. Again, it is proposed that the slow initiating step of the reaction involves the substitution of H2O2 for imidazole to form the imidazoyl peracid. This intermediate may decay by either cyclization or by reaction with another ODI molecule to form a cyclic peroxide that is much more efficient at energy transfer with the fluorophore. The reaction kinetics clearly distinguishes two separate pathways for the chemiluminescent reaction.     

Photophysical properties of a new DyLight 594 dye

We describe spectral properties of novel fluorescence probe DyLight? 594. Absorption and fluorescence spectra of this dye are in the region of Alexa 594 fluor spectra. The quantum yield of DyLight 594 in conjugated form to IgG is higher than corresponding quantum yield of Alexa 594 by about 50%. The new DyLight dye also shows slightly longer lifetime and photostability. These favorable properties and high anisotropy value, as well as a high cross-section for two-photon excitation, make this fluorophore attractive as a fluorescence probe in biochemical/biological studies involving fluorescence methods.     

Photobase-Driven Excited-State Intramolecular Proton Transfer (ESIPT) in a Strapped π-Electron System

We report a new design strategy for an excited-state intramolecular proton transfer (ESIPT) fluorophore that can be used in acidic media. A photobasic pyridine-centered donor-acceptor-donor-type fluorophore is combined with a basic trialkylamine “strap”. In the presence of an acid, protonation occurs predominantly at the amine moiety in the ground state. A single-crystal X-ray diffraction analysis confirmed the formation of a pre-organized intramolecular hydrogen-bonded structure between the resulting ammonium moiety and the pyridine ring. Upon excitation, the intramolecular charge-transfer transition increases the basicity of the pyridine moiety in the excited state, resulting in proton transfer from the amine to the pyridine moiety. Consequently, the fluorophore takes on a polymethine-dye character in the ESIPT state, which gives rise to significantly red-shifted emission with an increased fluorescence quantum yield.     

Development of an iminocoumarin-based zinc sensor suitable for ratiometric fluorescence imaging of neuronal zinc

Ratiometric imaging is a technique to reduce artifacts by minimizing the influence of extraneous factors on the fluorescence of a sensor and is particularly useful for cellular imaging studies. Here we characterized the iminocoumarin fluorophore as a new scaffold for sensors for ratiometric imaging. The iminocoumarin 4 showed a high quantum yield in aqueous media on excitation in the visible wavelength region, while its coumarin analogue showed little fluorescence. We therefore developed a novel fluorescence probe, ZnIC, for ratiometric imaging of Zn2+, using iminocoumarin as a fluorophore and (ethylamino)dipicolylamine as a Zn2+ chelator. ZnIC exhibited almost the same fluorescence properties as 4, and the emission spectrum of this probe was red-shifted on addition of Zn2+ under physiological conditions. ZnIC is selective for Zn2+ over other biologically important metal ions, such as Ca2+ and Mg2+, and has high affinity for Zn2+. To confirm the suitability of ZnIC for biological applications, we employed it for the ratiometric detection of changes in intracellular Zn2+ in cultured cells and in rat hippocampal slices. The results indicate that iminocoumarin is a useful fluorophore for fluorescence microscopic imaging and that ZnIC should be useful for studies on the biological functions of Zn2+.     

EXCITED-STATE PROPERTIES OF DNA METHYLATED AT THE NV7 POSITION OF GUANINE AND ITS FREE FLUOROPHORE AT ROOM TEMPERATURE

The room-temperature optical properties of calf thymus DNA, with about 75% of its guanine residues methylated at position N-7, are compared with those of 7-methyl GMP which has the same fluorophore. The fluorescence spectrum of the methylated guanine residues depends strongly on the excitation wavelength, shifting to the blue as the wavelength increases. The fluorescence quantum yield, corrected for the contribution to absorption by the other virtually nonfluorescent residues, exhibits a pronounced drop at long excitation wavelengths relative to that for excitation at 265 nm. The degree of fluorescence polarization exhibits a weak dependence on the excitation and emission wavelengths. For 7-methyl GMP, the fluorescence spectrum is very weakly dependent on the excitation wavelength and its fluorescence quantum yield shows a moderate increase at long wavelengths. The degree of fluorescence polarization increases with increasing excitation wavelength particularly when monitoring the emission in the short wavelength region of the fluorescence spectrum. A pronounced drop of unknown origin is observed when exciting at 265 nm, which is not observed for methylated DNA. The methylated DNA data are interpreted in terms of a combination of (i) a heterogeneous environment of the methylated guanine residues, which results from sequence-dependent stacking interactions, and (ii) transfer of excitation energy from the other residues to the fluorescing methylated guanine residues. From the values of the quantum yields and those of the decay times, which we have recently reported (Georghiou et al., 1985), the following values are obtained for the radiative, k_t, and the sum of the nonradiative, σk₁, rate constants for deexcitation of the excited states of methylated DNA and its free fluorophore: 1.6 × 10⁸ s^-1 7 × 10⁷ s^-1 and 5 × 10¹⁰ s^-lvs 6 × 10⁹ s^-1. Because of energy transfer from the other residues. the k_f value for the methylated guanine residues is overestimated but their σk₁, value is not affected significantly and is by about an order of magnitude larger than that for 7-methyl GMP, apparently because of stacking interactions.     

Environment-sensitive fluorophore emitting in protic environments

The unusual fluorescence properties of 8-methoxy-4-methyl-2H-benzo[g]chromen-2-one (1) are described. The fluorophore 1 is almost nonfluorescent in aprotic solvent (e.g., fluorescence quantum yield Phi(f) < 0.0003 in n-hexane), whereas it strongly fluoresces at long wavelengths (>450 nm) in protic solvent (e.g., Phi(f) = 0.21 in methanol). The fluorophore 1 also shows good applicability in developing a new fluorogenic (fluorescent "off-on") sensor. [structure: see text]     

Gold nanoparticle-fluorophore complex for conditionally fluorescing signal mediator

Fluorescent contrast agents with high specificity and sensitivity are valuable for accurate disease detection and diagnosis. Spherical gold nanoparticles (GNPs) can be smartly utilized for developing highly effective agents. The strong electromagnetic (plasmon) field on their surface can be very effective in influencing the electrons of fluorophores and, thus, manipulating the fluorescence output (i.e., either quenching or enhancement). Fluorescence quenching can be used for negative sensing, or for conditional de-quenching to increase the specificity. Fluorescence enhancement allows sensing to be more sensitive. The level of fluorescence alteration depends on the GNP size, the excitation and emission wavelengths and quantum yield of the fluorophore, and the distance between the GNP and the fluorophore. To understand the mechanisms of the fluorescence change by GNP, we have theoretically analyzed the parameters involved in the fluorescence alteration for commonly used fluorophores, with an emphasis on quenching. The results showed that the fluorescence of fluorophores with the excitation (Ex) and emission (Ex) wavelengths close to the GNP resonance peak tended to be significantly quenched by GNPs. For those fluorophores emitting fluorescence in red or near infrared, to achieve quenching, the distance between GNP and the fluorophore was required to be very short. In general, a shorter distance resulted in more quenching. Bigger GNPs require a shorter distance to achieve the same level of quenching. The fluorescence of a fluorophore with a lower quantum yield (especially the one with emission in far-red or near-infrared) is more difficult to be quenched by GNPs (requires very short distance). Instead, it can be enhanced. Based on the theoretical study, we have developed a near-infrared contrast agent, i.e., Cypate conjugated GNP via a short peptide spacer. Normally the fluorescence of Cypate was quenched. The spacer has a motif of a substrate for urokinase type plasminogen activator (uPA; cancer-secreting enzyme). This contrast agent emits fluorescence only in the presence of uPA, where the uPA cleaves the spacer. This design can be used in characterization of the cancer type and also in diagnosing other diseases with signature enzymes.     

Role of xanthurenic acid 8-O-beta-D-glucoside,a novel fluorophore that accumulates in the brunescent human eye lens

We have been able to identify a blue fluorophore from the low-molecular weight soluble fraction of human adult nondiabetic brunescent cataract lenses as xanthurenic acid 8-O-beta-D-glucoside (XA8OG) (excitation = 338 nm and emission = 440 nm). To determine the role of this fluorophore in the lens, we have examined its photophysical and photodynamic properties. We found XA8OG to have a fluorescence quantum yield (phi) of 0.22 and a major emission lifetime of 12 ns. We found it to be a UVA-region sensitizer, capable of efficiently generating singlet oxygen species but little of superoxide. We also demonstrated that XA8OG oxidizes proteins when irradiated with UVA light, causing photodynamic covalent chemical damage to proteins. Its accumulation in the aging human lens (and the attendant decrease of its precursor O-beta-D-glucoside of 3-hydroxykynurenine) can, thus, add to the oxidative burden on the system. XA8OG, thus, appears to be an endogenous chromophore in the lens, which can act as a cataractogenic agent.     

Evaluation of fluorescent compounds for peroxyoxalate chemiluminescence detection

The behaviour of 19 fluorescent compounds of various types in peroxyoxalate chemiluminescence reactions was studied in terms of the relation of their excitation efficiency to their singlet excitation energy and oxidation potential. Compounds having low singlet excitation energy and low oxidation potential were excited effectively. As a result of the study, 3-aminoperylene was selected as a fluorophore for derivatization of simple car?ylic acids. The derivatives were separated by reversed-phase microbore h.p.l.c. and were detected by a peroxyoxalate chemiluminescence reaction detector. The detection limit was 0.1 fmol.     

Environment-sensitive fluorophores with benzothiadiazole and benzoselenadiazole structures as candidate components of a fluorescent polymeric thermometer

An environment-sensitive fluorophore can change its maximum emission wavelength (λ(em)), fluorescence quantum yield (Φ(f)), and fluorescence lifetime in response to the surrounding environment. We have developed two new intramolecular charge-transfer-type environment-sensitive fluorophores, DBThD-IA and DBSeD-IA, in which the oxygen atom of a well-established 2,1,3-benzoxadiazole environment-sensitive fluorophore, DBD-IA, has been replaced by a sulfur and selenium atom, respectively. DBThD-IA is highly fluorescent in n-hexane (Φ(f) =0.81, λ(em) =537?nm) with excitation at 449?nm, but is almost nonfluorescent in water (Φ(f) =0.037, λ(em) =616?nm), similarly to DBD-IA (Φ(f) =0.91, λ(em) =520?nm in n-hexane; Φ(f) =0.027, λ(em) =616?nm in water). A similar variation in fluorescence properties was also observed for DBSeD-IA (Φ(f) =0.24, λ(em) =591?nm in n-hexane; Φ(f) =0.0046, λ(em) =672?nm in water). An intensive study of the solvent effects on the fluorescence properties of these fluorophores revealed that both the polarity of the environment and hydrogen bonding with solvent molecules accelerate the nonradiative relaxation of the excited fluorophores. Time-resolved optoacoustic and phosphorescence measurements clarified that both intersystem crossing and internal conversion are involved in the nonradiative relaxation processes of DBThD-IA and DBSeD-IA. In addition, DBThD-IA exhibits a 10-fold higher photostability in aqueous solution than the original fluorophore DBD-IA, which allowed us to create a new robust molecular nanogel thermometer for intracellular thermometry.     

Design and Synthesis of Chemiluminescent Cassettes Based on Energy Transfer

Chemiluminescent probes are being considered as a convenient option for optical imaging. Several strategies were reported to increase the probe chemiluminescence efficiency. In this study, a series of chemiluminescent cassettes based on adamantyl stabilized 1,2-dioxetanes (“Schaap's dioxetane”) linked to a fluorophore (BODIPY or dicyanoisophorone fluorophore) by a conjugated linker have been synthetized. Their chemiluminescent decomposition and the photoluminescence properties of their respective emissive species were investigated.     

Excited-state intramolecular proton transfer in 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives: the effect of donor and acceptor substituents

A series of water-soluble 2-(2'-arylsulfonamidophenyl)benzimidazole derivatives containing electron-donating and accepting groups attached to various positions of the fluorophore pi-system has been synthesized and characterized in aqueous solution at 0.1 M ionic strength. The measured pK(a)'s for deprotonation of the sulfonamide group of monosubstituted derivatives range between 6.75 and 9.33 and follow closely Hammett's free energy relationship. In neutral aqueous buffer, all compounds undergo efficient excited-state intramolecular proton transfer (ESIPT) to yield a strongly Stokes-shifted fluorescence emission from the phototautomer. Upon deprotonation of the sulfonamide nitrogen at high pH, ESIPT is interrupted to yield a new, blue-shifted emission band. The peak absorption and emission energies were strongly influenced by the nature of the substituents and their attachment positions on the fluorophore pi-system. The fluorescence quantum yield of the ESIPT tautomers revealed a significant correlation with the observed Stokes shifts. The study provides valuable information regarding substituent effects on the photophysical properties of this class of ESIPT fluorophores in an aqueous environment and may offer guidelines for designing emission ratiometric pH or metal-cation sensors for biological applications.     

Magnetic–fluorescent Langmuir–Blodgett films of fluorophore-labeled ferritin nanoparticles

We have covalently coupled fluorophore 4-(2-hydroxyethoxy)-7-nitro-2,1,3-benzoxadiazole (NBD) to the external ferritin shell through lysine residues. An increase in the luminescence quantum yield of the fluorescent ferritin particles and a blue shift in its emission peak compared to individual fluorophore were observed. The study of the particles by transmission electron microscopy showed that the native iron core ferritin is intact and that no degradation occurs during chemical functionalization of the protein shell. The NBD-labeled ferritin particles are water soluble, which allowed their controlled deposition by the Langmuir–Blodgett (LB) technique. Superparamagnetic and fluorescent properties of the particles are preserved within the LB film.     

Synthesis,Characterization, and Computational Investigation of Bright Orange-Emitting Benzothiadiazole [10]Cycloparaphenylene

Conjugated aromatic macrocycles are attractive due to their unique photophysical and optoelectronic properties. In particular, the cyclic radially oriented π-system of cycloparaphenylenes (CPPs) gives rise to photophysical properties unlike any other small molecule or carbon nanomaterial. CPPs have tunable emission, possess large extinction coefficients, wide effective Stokes shifts, and high quantum yields. However, accessing bright CPPs with emissions beyond 500 nm remains difficult. Herein, we present a novel and bright orange-emitting CPP-based fluorophore showing a dramatic 105 nm red-shift in emission and striking 237 nm effective Stokes shift while retaining a large quantum yield of 0.59. We postulate, and experimentally and theoretically support, that the quantum yield remains large due to the lack of intramolecular charge transfer.     

Tunable design strategy for fluorescence probes based on 4-substituted BODIPY chromophore: improvement of highly sensitive fluorescence probe for nitric oxide

4,4-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is a well-known fluorophore, with a high molar extinction coefficient and high fluorescence quantum efficiency (Phi(fl)). Furthermore, its structure can be modified to change its excitation and emission wavelengths. However, little work has been done on the structural modification of fluorines at the B-4 position with other functional groups. We synthesized 4-methoxy-substituted BODIPY derivatives in satisfactory yields, and found that they exhibited improved solubility in aqueous solution. Moreover, their oxidation and reduction potentials were greatly decreased without any change in their absorbance and fluorescence properties. These features of 4-substituted BODIPYs may be useful for developing novel fluorescence probes based on the intramolecular photoinduced electron transfer (PeT) mechanism, because it is possible to optimize the PeT process precisely by modulating the electrochemical properties of the fluorophore. The value of this approach is exemplified by its application to the development of a highly sensitive and pH-independent fluorescence probe for nitric oxide.     

Quenched peroxyoxalate chemiluminescence detection in aqueous liquid chromatographic separations

Several analytes, such as bromide, iodide, sulphite, nitrite, substituted anilines and organosulphur compounds cause quenching of peroxyoxalate chemiluminescence. This phenomenon, quenched peroxyoxalate chemiluminescence, can be used as a method of detection for liquid chromatography. The potential of quenched chemiluminescence is discussed, with special attention give to its compatibility with aqueous separation systems. An immobilized fluorophore, 3-aminofluoranthene on controlled pore glass, is packed in the detector cell. Liquid-state studies show that the influence of both the nature and concentration of the fluorophore is small, which indicates a more complicated mechanism of the chemiluminescence reaction than previously assumed. It is shown that bis(2-nitrophenyl)oxalat is a more suitable oxalate for quenched chemiluminescence detection than bis(2,4,6-trichlorophenyl) oxalate. This is demostrated for ion-chromatography of bromide and iodide and the aqueous reversed-phase separation of organosulphur compounds. Detection limits in the low nanogram and sub-nanogram region are reported for the above compounds. When an electronic inverter was used, calibration curves were linear over a concentration range of 2–3 decades. The method is quite selective and can be applied to relatively complex matrices without sample pretreatment.     

A versatile amino acid analogue of the solvatochromic fluorophore 4-N,N-dimethylamino-1,8-naphthalimide: a powerful tool for the study of dynamic protein interactions

We have developed a new unnatural amino acid based on the solvatochromic fluorophore 4-N,N-dimethylamino-1,8-naphthalimide (4-DMN) for application in the study of protein-protein interactions. The fluorescence quantum yield of this chromophore is highly sensitive to changes in the local solvent environment, demonstrating "switch-like" emission properties characteristic of the dimethylaminophthalimide family of fluorophores. In particular, this new species possesses a number of significant advantages over related fluorophores, including greater chemical stability under a wide range of conditions, a longer wavelength of excitation (408 nm), and improved synthetic accessibility. This amino acid has been prepared as an Fmoc-protected building block and may readily be incorporated into peptides via standard solid-phase peptide synthesis. A series of comparative studies are presented to demonstrate the advantageous properties of the 4-DMN amino acid relative to those of the previously reported 4-N,N-dimethylaminophthalimidoalanine and 6-N,N-dimethylamino-2,3-naphthalimidoalanine amino acids. Other commercially available solvatochromic fluorophores are also include in these studies. The potential of this new probe as a tool for the study of protein-protein interactions is demonstrated by introducing it into a peptide that is recognized by calcium-activated calmodulin. The binding interaction between these two components yields an increase in fluorescence emission greater than 900-fold.     

Synthesis,Characterization, and Computational Investigation of Bright Orange‐Emitting Benzothiadiazole [10]Cycloparaphenylene

Conjugated aromatic macrocycles are attractive due to their unique photophysical and optoelectronic properties. In particular, the cyclic radially oriented π‐system of cycloparaphenylenes (CPPs) gives rise to photophysical properties unlike any other small molecule or carbon nanomaterial. CPPs have tunable emission, possess large extinction coefficients, wide effective Stokes shifts, and high quantum yields. However, accessing bright CPPs with emissions beyond 500 nm remains difficult. Herein, we present a novel and bright orange‐emitting CPP‐based fluorophore showing a dramatic 105 nm red‐shift in emission and striking 237 nm effective Stokes shift while retaining a large quantum yield of 0.59. We postulate, and experimentally and theoretically support, that the quantum yield remains large due to the lack of intramolecular charge transfer.     

A ratiometric fluorescent viscosity sensor

The development of a dual probe that provides ratiometric measurements of fluid viscosity is described. The design is based on coupling of a primary fluorophore with viscosity-independent fluorescence emission (blue unit) with a secondary fluorophore that exhibits viscosity-sensitive fluorescent emission quantum yield (red unit). Excitation of the secondary fluorophore can be achieved via Resonance Energy Transfer. The ratio of the fluorescence emission of these fluorophores provides an accurate, ratiometric measurement of solvent viscosity.