Spectrophotometric determination of iron and copper in milk, foodstuffs and body tissues with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene

1-(2-Quinolylazo)-2,4,5-trihydroxybenzene has been proposed as a sensitive chromogenic reagent for the simultaneous determination of iron and copper in presence of thiosemicarbazide. The molar absorptivities are 1.86 x 10(4) l.mole(-1).cm(-1) at 510 nm for iron and 2.54 x 10(4) l.mole(-1).cm(-1) at 550 nm for copper. Trace levels of these two metals have been determined in some foodstuff's, body tissues and milk samples.     

Spectrophotometric determination of mn(II) with 1-(2-quinolylazo)-2,4,5- trihydroxybenzene and microdetermination of mn in foodstuffs

A method is described for the spectrophotometric determination of manganese in foodstuffs by means of its complex with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene, formed in alkaline medium. The molar absorptivity of the complex is 4.6 x 10(4) l.mole(-1).cm(-1).     

Rapid spectrophotometric determination of manganese(II) with 4-(2-thiazolylazo)-resorcinol

Summary Manganese forms a red chelate with 4-(2-thiazolylazo)-resorcinol at pH 8.8 (borate buffer), and absorbance is measured after 30 s, at 540 nm in the presence of 20%tert-butyl alcohol (by volume). The 12 complex obeys Beer's law for manganese concentration of 0.04–1.4g per ml, has molar absorptivity 4.176 x 10⁴ and Sandell sensitivity 0.0013g cm^–2. The formation constant (logK) is found to be 9.32, and relative standard deviation ±0.22%. Of the 48 ions studied for interference, only Co(II), Zn(II), Cd(II), Pb(II) and EDTA^2– are found to interfere. This method has been applied for the determination of manganese content in alloy steels.

---

Spektrophotometrische Bestimmung von Mangan(II) mit 4-(2-Thiazolylazo)-resorcin

Zusammenfassung Mangan bildet bei pH 8,8 (Boratpuffer) mit 4-(2-Thiazolylazo)-resorcin ein rotes Chelat, dessen Absorbanz nach 30 sec bei 540 nm in Gegenwart von 20% tert. Butylalkohol gemessen wird. Dieser 12-Komplex entspricht bei einer Mangan-Konzentration von 0,04–1,4g/ml dem Beerschen Gesetz; seine molare Absorption beträgt 4,176 x 10⁴, die Empfindlichkeit nach Sandell 0,0013g·cm^–2. Die Bildungskonstante (log K) beträgt 9,32, die rel. Standardabweichung ±0,22%. Unter 48 untersuchten Ionen erwiesen sich nur Co(II), Zn(II), Cd(II), Pb(II) und EDTA als störend.-Das Verfahren wurde zur Bestimmung des Mangangehaltes in Stahl verwendet.

     

2-(2-喹啉偶氮)-5-二甲氨基苯酚光度法测定铀的研究

铀的测定一般采用铀试剂-Ⅲ或5-Br-PADAP光度法。2-喹啉偶氮类试剂已用于一些金属离子的测定,由于其共轭体系大,比吡啶偶氮类试剂具有更高的灵敏度。我们合成了2-(2-喹啉偶氮)-5-二甲氨基苯酚(QADMAP),产品经IR,MS及^1H NMR表征(谱图略)。研究其和铀的显色反应,建立了一种测定矿石中铀的方法。     

Simultaneous spectrophotometric determination of Zinc(II) and Nickel(II) with 1-(2-pyridylazo)-2-naphthol

A new procedure for the simultaneous spectrophotometric determination of Zn(II) and Ni(II) with 1-(2-pyridylazo)-2-naphthol as chromogenic reagent has been developed. It is based on resolution of the mixed spectrum over the wavelength range 530–590 nm by applying a least-squares fitting program to standard spectra from each component. The spectra are recorded at an apparent pH of 5.0, provided by an acetate buffer in a mixed 6040 v/v 2-ethoxyethanol/water medium. The relative standard deviations for determination of 13.7 g of Ni and 31.0 g of Zn were 1.9 and 1.0%, respectively (8 replications). The method has been applied to the analysis of iron surfaces coated with a Zn-Ni alloy. The results are compared with those obtained by atomic-absorption spectrophotometry.     

Extraction—spectrophotometric determination of manganese(II) with xanthates

Manganese(II) (0.04–2 μmol) is extracted into chloroform from an aqueous phase at pH 6.5–9.0, containing a large excess of (n-butyl) xanthate and measured spectrophotometrically at 457 nm. The apparent molar absorptivity is 5.5 × 10³ dm³ mol^-1 cm^-1. The extractability of the manganese complexes decreases in the order n-butyl = benzyl- ? n-propyl- ? ethyl- ? methyl-xanthate. Interfering ions can be removed by a preliminary extraction with ethylxanthate. Ni, Co, Zn, Cd, Pb, Hg(II), Fe(III), As(III), Ce(III), Se(IV), V(V), Mo(VI), and the alkali and alkaline earth metals do not interfere.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

1,5-二(2-羟基-5-氯苯基)-3-氰基甲 催化动力学光度法测定痕量锰(II)

The aerial oxidation of 1, 5-bis (2-hydroxy-5-chlorophenyl)- 3-cyanoformazan (HCPCF) in ammoniacal medium catalyzed by Mn(II) has been investigated and used for spectrophotometric determination of trace Mn(II) in water. The effect of various experimental factors was studied and the optimal conditions for Mn(II) determination were found. It has been shown that the reaction follows the rate expression:     

Extraction spectrophotometric determination of maneb with 1-(2'-pyridylazo)-2-naphthol (PAN)

A rapid, sensitive, simple and selective spectrophotometric method has been developed for the determination of micro-quantities of maneb (manganese ethylenebisdithiocarbamate) after extraction of the manganese-PAN complex in isobutyl methyl ketone (MIBK). The complex absorbs strongly at 550 nm. Beer's law is obeyed over the concentration range 0.37-3.75 microg/ml. The molar absorptivity was found to be 4.1 x 10(4) l. mole(-1) . cm(-1). The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixtures, grain and in the presence of various other dithiocarbamates.     

4-(8-quinolylazo)resorcinol and 1-(8-quinolylazo)-2-naphthol: Synthesis and sorption properties

A methodology of the synthesis of 4-(8-quinolylazo)resorcinol (QAR) and 1-(8-quinolylazo)-2-naphthol (QAN) was developed. The synthesized compounds were used to modify an oxidized charcoal sorbent. The sorbent efficiently adsorbs copper(II) and zinc(II) cations to form surface electroneutral chelate complexes. The conditions of sorption and desorption of zinc(II) and copper(II) were studied.     

Sensitive spectrophotometric determination of La(III) with 1-(2-pyridylazo)-2-naphthol

A simple and sensitive method for spectrophotometric determination of lanthanum has been developed. At pH 9.6, in presence of 50% ethanol, lanthanum reacts with 1-(-2-pyridylazo)-2-naphthol (PAN) to form a red complex which has two absorption maxima, at 545 and 510 nm. The molar absorptivity at 545 nm is 0.55 × 10⁴ liters · mol^?1 cm^?1. On the other hand, lanthanum reacts with PAN in pure ethanol to form a red complex at 530 nm, with high molar absorptivity (8 × 10⁴ liters · mol^?1 cm^?1).     

Spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP) was synthesized. A highly sensitive, selective and rapid method for the determination of silver based on the rapid reaction of silver(I) with QADEAP has been developed. In the presence of citric acid-sodium hydroxide buffer solution (pH=5.0) and sodium dodecyl sulfonate (SDS) medium, QADEAP reacts with silver to form a violet complex of a molar ratio 1:2 (silver to QADEAP). The molar absorptivity of the complex is 1.33x10(5) L mol(-1) cm(-1)at 590 nm. Beer' s law is obeyed in the range of 0.01-0.6 micro g mL(-1). The relative standard deviations for eleven replicate samples of 0.2 microg mL(-1) is 1.38%. This method was applied to the determination of silver in water with satisfactory results.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

2-(8-quinolylazo)-4,5-diphenylimidazole — a sensitive extraction spectrophotometric reagent for mercury

Mercury(II) reacts with 2-(8-quinolylazo)-4,5-diphenylimidazole in aqueous solution; the complex can be extracted with chloroform or 1,2-dichloroethane at pH 4.5–9.5 to give a stable reddish-purple solution. The system conforms to Beer's law; the optimal range in chloroform is 0.05–2 ppm mercury (1-cm cells). Of 25 metal ions investigated, only copper and vanadium interfere seriously. The proposed method is exceptionally sensitive; the molar absorptivity in the chloroform extract is 7.3 × 10⁴ l mol^?1 cm^?1 at 580 nm; the Sandell sensitivity is 0.0027μg Hg cm^?2.     

Sulfonated 1-(2-pyridylazo)-2-naphthols and 2-(2-pyridylazo)-1-naphthols as spectrophotometric reagents: Determination of nickel

Three sulfonated 1-(2-pyridylazo)-2-naphthols and six sulfonated 2-(2-pyridylazo)-1-naphthols were synthesized, and their application to the spectrophotometric determination of metals was studied. The acidity constants of the reagents and the stability constants of the nickel chelates are reported, and the relationship between their properties and the position of the sulfonic acid group is discussed. 1-(2-Pyridylazo)-2-naphthol-6-sulfonic acid (PAN-6S) and 1-(2-pyridylazo)-2-naphthol-7-sulfonic acid (PAN-7S) are sensitive and selective reagents for nickel. The determination of nickel in the presence of cobalt with PAN-6S is described. Extraction of the chelate as the ion-pair with tetraphenylarsonium ions into chloroform is suitable for the determination of 1–10 μg Ni at 570 nm; the molar absorptivity is 56 000 l mol^-1 cm^-1, and interferences are easily avoided.     

Rapid spectrophotometric determination of thorium(IV) with 1-(2′-thiazolylazo)-2-naphthol

Thorium(IV) reacts with 1-(2-thiazolylazo)-2-naphthol (TAN) in the presence of antipyrine to form a sparingly soluble red-coloured chelate, soluble in 36% methanol (v/v). Complexation takes place instantaneously at pH 2.4–2.8, maintained by glycine buffer. Antipyrine is found to enhance sensitivity of the complex, which is stable for 19 hours. The 12 complex exhibits maximum absorbance at 555 nm, obyes Beer's law in the concentration range from 0.32 to 6.56 g of thorium(IV) per ml, has a molar absorptivity of 3.14·10⁴ dm³/mol^–1·cm^–1 and a Sandel sensitivity of 7.4 ng·cm^–2. The formation constant (log K) is found to be 8.62 and 8.45. Interference of 57 anions and cations in the determination of thorium(IV) has been studied. From ten repeated determinations, the coefficient of variation was found to be ±0.98%. The method was successfully applied for determination of thorium content in a sample of monazite.     

Complexing properties of thiazolylazophenols and spectrophotometric determination of iron(II) with 2-(2-benzothiazolylazo)-4-methoxyphenol

Summary Thiazolylazophenols containing a methyl or a phenyl group in the thiazole ring were synthesized and their potential for the spectrophotometric determination of iron were studied. These dyes react with iron(II) to form brownish complexes, which show a characteristic absorption in near-infrared region. Among them, 2-(2-benzothiazolylazo)-4-methoxyphenol is most suitable and the iron(II) complex has the absorption maximum at 815 nm in chloroform. The optimum pH for iron extraction lies between 5.5–9.5 and Beer's law holds up to 6 ppm of iron, with a molar absorptivity of 1.47×10⁴ 1 mol^–1 cm^–1. The composition and the extraction constant of the complex was found to be FeBTAMP=12 and log K_ex=–0.76±0.12, respectively. Many kinds of ions can be tolerated even in the presence of large amounts. The method has been applied to the determination of iron in mixtures containing 3d type metal ions, natural waters and native sulfurs with satisfactory results.

---

Komplexbildende Eigenschaften von Thiazolylazophenol und spektro-photometrische Bestimmung von Eisen(II) mit 2-(2-Benzothiazolylazo)-4-methoxyphenol

Zusammenfassung Thiazolylazophenol mit einer Methyl- bzw. Phenylgruppe am Thiazolring wurde synthetisiert und seine Eignung für die spektrophotometrische Bestimmung von Eisen(II) studiert. Diese Farbstoffe bilden mit Fe(II) bräunliche Komplexe, die charakteristische Absorption im nahen IR zeigen. Unter ihnen ist 2-(2-Benzothiazolylazo)-4-methoxyphenol am besten geeignet. Der Fe(II)-Komplex hat ein Absorptionsmaximum bei 815 nm in Chloroform. Das optimale pH für die Eisenextraktion liegt zwischen 5,5 und 9,5; das Beersche Gesetz ist bis zu 6 ppm Fe erfüllt, der molare Extinktionskoeffizient beträgt 1,47×10⁴ l·mol^–1·cm^–1. Fe(II)BTMP=12. Die Extraktionskonstante ist log K_ex=–0,76±0,12. Zahlreiche Ionen stören auch in größerer Menge nicht. Die Methode wurde zur Eisenbestimmung in Gemischen mit 3d-Typ-Metallen, in natürlichen Wässern und in inländischem Schwefel angewandt.

     

Extraction and spectrophotometric determination of copper(II) with 1,1,1-trifluoro-3-(2-thenoyl)acetone

Copper(II)-trifluorothenoylacetone complex in chloroform does not undergo decomposition when scrubbed with sodium hydroxide solution. This allows the complete removal of the residual reagent, and a highly sensitive method for the extraction and spectrophotometric determination of copper(II) results.