Modular stopped-flow/diode-array detection system for simultaneous kinetic analysis

The coupling of a stopped-flow module to a diode-array spectrophotometric detector has been exploited for the simultaneous kinetic resolution of mixtures. The analytical possibilities are shown with the resolution of a mixture of two analytes (hydrazine and phenylhydrazine), yielding products with different spectral features (after reaction with p-dimethylaminobenzaldehyde), so that only the simultaneous measurement of their respective initial rates at their corresponding maximum absorption wavelengths is possible. The method allows 0.02–30 μg ml^?1 hydrazine and 8–2200 μg ml^?1 phenylhydrazine to be determined simultaneously.     

N-p-tolyl-2-furohydroxamic Acid as the Extracting and Spectrophotometric Reagent for Vanadium(V)

Abstract

A simple and rapid spectrophotometric determination of vanadium(V) is described. The vanadium-N-p-tolyl-2-furohydroxamic acid complex is extracted into chloroform form 6–8 molar hydrochloric acid solution. Maximum absorbance occurs at 540 nm and Beer's Law is obeyed over the range of 0–15 μg of vanadium in the organic phase. The molar absorptivity is 3.0 × 10³ mole^?1 cm^?1 at 540 nm.

Vanadium could be determined in high purity niobium and tantalum metals, cast iron, steel, non ferrous alloys and silicates. Vanadium could be determined in the presence of several commonly occurring cations.     

Spectrophotometric determination of tantalum with 4,5-dibromo-o-nitrophenylfluorone

Micro amounts of tantalum can be determined directly by spectrophotometry with 4,5-dibromo-o-nitrophenylfluorone, citric acid, hydrogen peroxide and Triton X-100 in 0.5–5 mol l^?1 sulphuric acid. The apparent molar absorptivity of tantalum at 530 nm is 1.84 × 10⁵ l mol^?1 cm^?1. Beer's law is obeyed for 0–10 μg of tantalum in 25 ml of solution at 530 nm and a large amount of niobium and most foreign ions can be tolerated. Results obtained by applying the proposed method to niobium oxide, ferroniobium, nickel-base alloy and a mineral are satisfactory. The synthesis of the complexing agent is described.     

Use of diode-array detectors for the simultaneous spectrophotometric determination of calcium and magnesium by flow injection

A method for the simultaneous flow injection spectrophotometric determination of calcium and magnesium with Arsenazo III based on the use of diode-array detector and merging zones is described. The method is applicable to the resolution of mixtures in which the chromogenic reagent has a high absorbance and its spectrum strongly overlaps those of its complexes. In resolving the mixtures, the excess reagent is considered as another component. Quantitation is based on the normal absorbance and first-derivative absorbance spectra. The method is applied to 0.2–1.5 μg ml^?1 Ca and 0.1–1.0 μg ml^?1 Mg. The analysis rate is 50 h^?1.     

Utility of p-chloranilic Acid and 2,3 Dichloro-5,6-dicyano p-Benzoquinone (DDQ) for the Spectrophotometric Determination of Triamterene

Abstract

Two simple and sensitive spectrophotometric procedures are suggested for analysis of triamterene. The first procedure is based on the reaction of triamterene with p-chloranilic acid (p-CA) in methylene chloride to form a highly stable coloured product, exhibiting maximum absorbance at λ 530 nm. Beer's law is obeyed in the range of 40–220 μg.ml^?1 with a mean percentage accuracy of 99.98 ± 0.446. Limit of determination is 20 μg.ml^?1. In the second procedure, the drug is determined via charge transfer complex formation with 2,3 dichloro-5,6-dicyano p-benzoquinone (DDQ) using methylene chloride as a solvent. Here the reaction product has two well defined maxima at 460 nm and 530 nm where each has been utilized for quantitative determination. Beer's law is obeyed in concentration ranges of 25–125 μg.ml^?1 and 25–150 μg.ml^?1 with mean percentage accuracies of 99.92 ± 0.449 and 100.00 ± 0.511 for both maxima. 460 and 530 nm. respectively. Limit of determination is 12.5 μg.ml^?1 at both maxima. Optimum conditions for each procedure have been studied and the stoichiometry of both reactions was ascertained using Job's method of continuous variation. The validity of the suggested procedures was assessed by applying the standard addition technique using the drug capsules. Both procedures are statistically analyzed as compared with BP method for analysis of triamterene (non aqueous titration) revealing good accuracy and precision as indicated by t and F tests.     

Rapid spectrophotometric determination of ruthenium(III) with prochlorperazine maleate

A rapid, simple spectrophotometric method for the determination of μg amounts of ruthenium, based on the formation of a pink complex between the metal and prochlorperazine maleate (PCPM) in sulphuric or hydrochloric acid solution, is described. The complex has an absorption maximum at 530 nm and its molar absorptivity is 6.733·10³ l mol^?1 cm^?1. The sensitivity is 0.0151 μg Ru cm^?2 for log I_o/I = 0.001. Beer's law is valid over the range 0.2–10 μg Ru ml^?1 ; the optimal range for spectrophotometric determination is 0.8–8.0 μg Ru ml^?1. Job's method of continuous variation, the mole ratio method and the slope ratio method indicate a 1:1 composition for the complex. The effects of acidity, time, temperature, order of addition of reagents, reagent concentration, and the interferences from various ions are reported.     

Spectrophotometric and First Derivative Spectrophotometric Determination of Magnesium with 1-Hydroxy-2-Carboxyanthraquinone

Abstract

1-Hydroxy-2-carboxyanthraquinone reacts with magnesium in ethanol-water mixtures to form a red complex having an absorption maximum at 490 nm in alkaline medium. A detailed study of the characteristics of this complex has been carried out and a spectrophotometric method for the determination of magnesium at the 0.4–4.0 μg ml^?1 level is proposed. The method has been sensitized by employing first derivative spectrophotometry. By the use of the derivative approach magnesium can be determined between 0.08–0.40 μg ml^?1. Statistical analysis of the results is also described.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.     

Spectrophotometric Determination of Acebutolol Hydrochloride and Nicoumalone with Metol and Potassium Permanganate

Abstract

A spectrophotometric method is described for the determination of Nicoumalone and Acebutolol hydrochloride based on the formation of molecular complex with the reduction product of Nicoumalone or hydrolysis product of Acebutolol hydrochloride and p-N-methyl benzoguinone monoimine [formed in situ from met01 (p-N-methylaminophenol sulfate) and potassium permanganate, PMBQMI] at pH 3.3. Quantitative measurements were made at the maximum absorption of 525 nm. Beer's law is obeyed in the range of 5–50 μg ml^?1 and 5–60 μg ml^?1 for Nicoumalone and Acebutolol hydrochloride respectively. The proposed method is comparable with the reference method when applied to pharmaceutical preparations, and tablets, An average percentage recovery of 99.5 ± 0.8 was obtained.     

Spectrophotometric determination of iron(III) with EDTA tetrahydrazide

The tetrahydrazide of ethylenediamine tetraacetic acid (NH₂NH)₄-EDTA was synthesized from the EDTA ester and hydrazine hydrate in ethanolic solution, the resulting (NH₂NH)₄-EDTA being recrystallized in 60% ethanol. When the spectrophotometric study of the iron(III) (NH₂NH)₄-EDTA complex in aqueous solution was made two absorption maxima at 530 and 450 nm at pH 4.5 and 11.0, respectively, were found. Beer's law is obeyed in the range 1.0–20.0 μg Fe(III) ml^?1 at 530 nm and pH 4.5 and 0.5–12.0 μg Fe(III) ml^?1 at 450 nm and pH 11.0, the molar absorptivities being 1.95 × 10³ 1 mol^?1 cm^?1 at 530 nm and 3.35 × 10³ 1 mol^?1 cm^?1 at 450 nm, respectively. The Ringbom optimal interval falls between about 3 and 18 μg Fe(III) ml^?1 at 530 nm and about 2–14 μg Fe(III) ml^?1 at 450 nm. The reaction between the metal and the ligand was also investigated. The method has been successfully applied to the determination of iron in talcs.     

Determination of technetium based on quenching of the fluorescence of some organic compounds,with application to vegetation

Technetium is an effective quencher of the fluorescence produced by 2,5-diphenyloxazole (PPO), 1,4-bis(4-methyl-5-phenyl-2-oxazolyl)benzene (POPOP) and 2,2′-pyridil [1,2-dioxo-1,2-bis(2-pyridyl)ethane]. Spectrofluorimetric procedures for 0.01–12 μg Tc ml^?1 with PPO and 0.1–12 μg ml^?1 with 2,2′-pyridil, and a spectrophotometric method for 1–15 μg ml^?1 are described. The distribution of technetium in vegetation is measured by applying the PPO method.     

Simultaneous Determination of Nickel(II) and Copper(II) by Second‐Derivative Spectrophotometric Method in Micellar Media

A second‐derivative spectrophotometric method based on zero‐crossing over technique is developed in simultaneous determination of copper(II) and nickel(II) ions. Methylthymol blue (MTB) as a chromogenic reagent and cetyltrimethylammonium bromide as a surfactant were used, and measurements were carried out in buffered solution at pH 6 and at a temperature of 25 °C. The amplitude of derivative spectra was measured at wavelengths of 631.9 and 587.7 nm for the simultaneous determination of Ni²⁺ and Cu²⁺, respectively. Linearity was obtained in the range of 0.5–5.0 μg mL^?1 for both ions in the presence of 0.0–5.0 μg mL^?1 of the other ion as an interfering ion. IUPAC detection limits for Cu²⁺ and Ni²⁺ ions were obtained at 0.48 and 0.43 μg mL^?1, respectively. The proposed procedure has been applied successfully for the simultaneous determination of copper and nickel in synthetic binary mixtures and real samples.     

Difference spectrophotemetric assay of mixtures of phenylpropanolamine hydrochloride with guaifensesin or fextromethorphan hydrobromide in olid cough formulations

A difference spectrophotometric method is described for the selective assay of phenylpropanolamine hydrochloride(I) in the presence of guaifenesin(II) or dextromethorphan hydrobromide(III) without prior separation. The method is based on the spectral change upon oxidation of phenylpropanolamine to benzaldehyde by sodium metaperiodate. The difference absorption spectrum is obtained by measuring oxidized against unoxidized phenylpropanolamine. This spectrum exhibits a maximum of 251.5 nm, a minimum at 275 nm and an isosbestic point at 272.5 nm. Absorbance is linear with concentration for 25–100 μg ml^?1 phenylpropanolamine at 251.5 nm. No changes in the spectra of compounds II and III were observed when these compounds were treated with metaperiodate. Guaifenesin and dextromethorphan are assayed by measuring an aliquot of the sample solution against methanol at 281.5 nm and 286 nm, respectively. Phenylpropanolamine does not interfere at these wavelengths. Calibrations are linear over the range 25–125 μg ml^?1 for II and III. Overall recoveries (±SD, n = 5) from simulated tablets were 99.8 ± 2.6% for I and 100.5 ± 0.5% for II; from simulated capsules, the recoveries were 99.2 ± 0.4% for I and 99.6 ± 0.2% for III. The assay was succesfully applied to commercial tablets and capsules containing these compounds.     

Zero-Crossing Derivative Spectrophotometric Determination of Mercury(II) And Palladium(II) with 5-(3,4-Methoxyhydroxyphenylmethylene)-2-thioxo-1-3-thiazolidine and Cetyltrimethylammonium Bromide

Abstract

A method is proposed for the simultaneous determination of mercury(II) and palladium(II) by first-derivative spectrophotometry based on the absorption spectra of their complexes with 5-(3,4-Methoxyhydroxyphenylmethylene)-2-thioxo-1,3-thiazolidine [5-(3,4-methoxyhydroxybenzylidene) rhodanine]. Zero-crossing measurement technique is found suitable for the measurement of the first-derivative value at the specified wavelengths. Mercury(II) (0.4-1.4 μg ml^?1) and palladium(II) (0.08 - 1.8 μg ml^?1) in different ratios have been determined simultaneously. A critical evaluation of the proposed method is performed by statistical analysis of the experimental data.     

Spectrophotometric study of the reaction of titanium with bromopyrogallol red in the presence of cetylpyridinium bromide

Optimal conditions were found for the reaction of Ti(IV) with bromopyrogallol red (λ = 625 nm, pH = 2.5, c_DG = 4 × 10^?5M, c_CPB = 5 × 10^?4M) and a new method was developed for the spectrophotometric determination of titanium in the concentration range 0.05–0.5 μg ml^?1. A mechanism was proposed for the studied reaction on the basis of a kinetic study.     

2-(α-pyridyl)thioquinaldinamide: a novel fluorimetric reagent in inorganic trace analysis. : Part 2. A simple selective determination of selenium(IV) at Ultratrace Levels

The very sensitive fluorimetric determination of selenium(IV) is based on its oxidation of the non-fluorescent 2-(α-pyridyl)thioquinaldinamide in slightly acidic solution (0.05–0.15 M sulphuric acid). The excitation and emission wavelengths are 350 nm and 500 nm, respectively. Linear calibration graphs are obtained for different ranges of selenium concentration between 0.01 ng ml^?1 and 0.5 μg ml^?1. Over sixty ions either do not interfere or can be masked in the determination of 1 ng ml^?1 Se(IV). The method is applied successfully to various synthetic mixtures and to a native sulphur sample. The reaction is fast and the fluorescent system is stable for 24 hours.     

Simultaneous Determination of Dipyrone and Papaverine in Pharmaceutical Formulation using PLS Regression and UV Spectrophotometry

Abstract

A combination of sodium dipyrone and papaverine hydrochloride is used as an analgesic and antispasmodic drug. A simple and rapid procedure is proposed for simultaneous determination of these drugs in commercial formulations (Melpaz^®) based on partial least squares (PLS) regression and UV spectrophotometric measurements in the range of 218–300 nm. The calibration set was built with 25 solutions in concentrations ranging from 15.0–35.0 mg ml^?1 for dipyrone and from 0.5–1.5 mg ml^?1 for papaverine in methanol. The relative standard deviation (RSD) was 1.05% for dipyrone and 1.55% for papaverine in pharmaceutical formulations. The percent of relative recovery was 95.9% for dipyrone and 95.2% for papaverine. Figures of merit, such as accuracy, precision, sensitivity and adjust were also determined. The methodology was validated by using an independent method, based on high performance liquid chromatography (HPLC).     

Simultaneous determination of free and EDTA-complexed copper ions by flame atomic absorption spectrometry with an ion-exchange flow-injection system

A simple method is described for the simultaneous determination of free and complexed copper ions in a flow-injection system comprising ion-exchange and flame atomic absorption spectrometry. Sampling rates for 400-μl samples were 90 h^?1. Typical relative standard deviations for the simultaneous determinations were 1.6% for the complexed metal (0.50 μg ml^?1) and 1.0% for the free metal (0.20 μg ml^?1).     

Spectrophotometric determination of chlorhexidine with bromocresol green by flow-injection and manual methods

A spectrophotometric study of the chlorhexidine/bromocresol green/Triton X-100 system is reported; at pH 5.3, both 2:1 and 1:1 bromocresol green/chlorhexidine complexes are formed. In the manual spectrophotometric method, Beer's law is obeyed for chlorhexidine concentrations of 2.9–32.2 μg ml^?1 (r.s.d. 0.4–1.3%); the molar absorptivity is 12 500 l mol^?1 cm^?1. In the flow-injection method, the calibration graph is linear for the chlorhexidine range 23.0–83.9 μg ml^?1 (r.s.d. 0.8%); the injection is ca. 60 h^?1. Benzocaine, acetylsalicylic acid, ascorbic acid and sucrose are tolerated at 10^?2?10^?3 M levels. Hibitane 5% was analyzed successfully.     

A Sensitive Spectrophotometric Determination of Tantalum (V) with 5,7-Diiodo-8-Hydroxyquinoline

A spectrophotometric method for the determination of trace amounts of tantalum (V) with 5–7-diiodo-8-hydroxyquinoline is described. With this reagent tantalum forms a yellowish-orange coloured complex which is stable in the pH range of 8.5–9.0. The coloured complex obeys Beer's law over the concentration range of 1–10 μg tantalum (V) ml^?1 at 415 nm in aqueous solution with a molar absorptivity of 5.305×10³ l mol^?1 cm^?1. The metal; ligand ratio ML₂ was confirmed by Job's continuous variation and mole ratio methods. The method was used to determine tantalum in steels.