Stripping voltammetric determination of traces of peptides and proteins containing disulphide linkages

Stripping voltammetry has been investigated for the determination of traces of ribonuclease, somatostatin, oxytocin, felypressin, insulin and oxidized glutathione at concentrations down to 1.5 × 10^?9 M. Repeated cyclic potential scans with an initial cathodic scan were used after accumulation at +0.1 to –0.3 V vs. Ag/AgCl at a hanging mercury drop electrode. In presence of excess of copper(II) ion, the first two compounds yield a well-defined peak couple at ?0.5 to ?0.6 V, with cathodic and anodic peaks of equal height, the accumulated product being adsorbed in both its oxidized and reduced state. Oxytocin and felypressin first yield two unresolved cathodic peaks, one of which disappears in the second scan cycle. Oxidized glutathione yields a large cathodic peak but a small anodic peak because of desorption in the reduced state. Excess of copper(II) is reduced during the accumulation, so that the electrode is actually copper amalgam. The peaks obtained with copper(II) present are considered to be due to redox reactions of copper complexes formed with the cysteine parts of the molecules. These peaks are suitable for quantitative purposes; calibration equations are given. Without copper(II), the substances show stripping responses of different complexity and magnitude. Insulin gives usable stripping peaks only without copper ions.     

Stripping voltammetric determination of azide ions

A procedure is proposed for the stripping voltammetric determination of N ₃ ^? ions at a mercury film electrode. It is based on the reduction of the mercury azide formed upon the oxidation of mercury in the presence of N ₃ ^? at ?0.02 to ?0.04V (in reference to an Ag/AgCl electrode) in a 0.1 M Na₂SO₄ supporting electrolyte solution. A linear dependence of the cathodic current peak on the N ₃ ^? concentration is observed in the concentration range from 4 × 10^?9 to 1 × 10^?3 M.     

Stripping voltammetric determination of traces of technetium with a glassy carbon electrode coated with tri-n-octylphosphine oxide

Technetium(VII) and Tc(IV) are concentrated from 3 M hydrochloric acid media by complexing with tri-n-octylphosphine oxide applied as a thin layer to a glassy carbon electrode. Differential-pulse cathodic stripping voltammetry from 0 V provides a stripping peak for Tc(VII) at ?350 mV (vs. Ag/AgCl). The detection limit after an enrichment time of 10 min is about 1.8×10^?8 M Tc(VII). Technetium(IV) produces a stripping peak near the Tc(VII) peak which can be used for rough estimates of the Tc(VII)/Tc(IV) ratio within limited ranges. Uranium(VI) in equimolar concentrations interferes.     

Stripping voltammetry of thorium based on adsorptive accumulation

A sensitive stripping voltammetric procedure for quantifying thorium is described. The chelate of thorium with the azo dye Mordant Blue 9 is adsorbed on the hanging mercury drop electrode, and the reduction current of the accumulated chelate is measured during a negative-going potential scan. Cyclic voltammetry is used to characterize the interfacial and redox behaviors. The effects of pH, dye concentration and accumulation potential are discussed. The detection limit is 4 × 10^?10 M (4-min accumulation), a linear current-concentration relationship is observed up to 1.3 × 10^?7 M, and the relative standard deviation (at the 6 × 10^?8 M level) is 3.1%. Possible interferences by trace metals and organic surfactants are investigated. Simultaneous quantitation of thorium and nickel is illustrated.     

Trace adsorptive voltammetric determination of antimony in hair

A very sensitive electrochemical procedure for trace determination of antimony is described. The complex of antimony with p-dimethyl-aminophenyl-fluorone (p-DMPF) is adsorbed on a hanging mercury drop electrode (HMDE), and the reduction current of the accumulated complex is measured by voltammetry. In linear sweep voltammetry, the reduction potential of the complex is more positive than that of the free dye. The peak height of the complex is proportional to the concentration of antimony in the range of 4.0 x 10(-9) to 4.0 x 10(-7) M, the detection limit is 1.0 x 10(-9) M Sb(III) for a 5 min preconcentration time. The relative standard error for the determination of 8.0 x 10(-8) M Sb(III) is 2.9%.     

Square wave adsorptive voltammetric determination of sunset yellow

Square wave adsorptive stripping voltammetry was used for determining trace amounts of dye Sunset Yellow (E-110) for the first time. Its adsorptive voltammetric behaviour followed by a square wave mode step was investigated at different pH media. Sunset Yellow in 0.5 M NH (4)Cl NH (3) buffer solution gave an adsorptive stripping voltammetric peak at the hanging mercury drop electrode at -0.60 V using an accumulation potential of -0.40 V. The effect of experimental parameters that affected this determination are discussed. The calibration graph to determine Sunset Yellow was linear in the range 5-90 mug 1(-1), obtaining a relative standard deviation of 2.2% for a solution of 30 mug 1(-1) (n = 10) in the same day. The determination limit was 5 mug 1(-1) after 15 s of accumulation at -0.40 V. The proposed method was applied to determine this dye in several commercial refreshing drinks, which contained small amounts of this compound. Measurements were made directly over diluted solutions of commercial samples. Similar results were obtained between adsorptive stripping square-wave voltammetric values and the obtained by application of a HPLC method with spectrophotometric detection.     

Stripping voltammetric determination of trace levels of uranium by synergic adsorption

A voltammetric method is reported for the determination of low uranium concentrations in natural waters. A very strongly adsorbed mixed complex of uranyl ion with 2-thenoyltrifluoroacetone and tri-n-butyl phosphate is applied. Synergic adsorption is obtained compared with the adsorption obtained with either ligand alone. In 0.55 mol dm^?3 sodium chloride, the detection limit was 10^?10 mol dm^?3 uranyl ion after accumulation for 10 min at ?0.1 V vs. Ag/AgCl. For the natural level of uranium in sea water (about 10^?8 mol dm^?3), accumulation for 2 min was sufficient.     

A new method for voltammetric determination of the stoichiometry of metal complexes

A new method for voltammetric determination of the composition of metal complexes has been developed. This method can be used in a manner similar to that of molar ratio except that the voltammetric technique is employed instead of the spectroscopic one. The present technique has been applied to the transition metal complexes with some typical uni-, bi-, ter- and sexidentate ligands, and it was found that the compositions determined by this method were in good agreement with those from the spectroscopic technique. A theoretical approach to this method has been presented.     

Stripping voltammetric determination of bismuth in raw gold ores

Stripping voltammetry was used to determine bismuth(III) in raw gold ores. The effect of some matrix elements, Cu(II), Au(III), Pt(IV), Pd(II), etc. on the current of bismuth(III) electrooxidation was studied. The conditions the extraction of bismuth(III) dithizonate with chloroform from a complex matrix are found. A procedure is developed for determining bismuth(III) in raw gold ores.     

Square wave adsorptive stripping voltammetric determination of famotidine in urine

Electrochemical studies of famotidine were carried out using voltammetric techniques: cyclic voltammetry, linear sweep and square wave adsorptive stripping voltammetry. The dependence of the current on pH, buffer concentration, nature of the buffer, and scan rate was investigated. The best results for the determination of famotidine were obtained in MOPS buffer solution at pH 6.7. This electroanalytical procedure enabled to determine famotidine in the concentration range 1 × 10⁻⁹–4 × 10⁻⁸ mol L⁻¹ by linear sweep adsorptive stripping voltammetry (LS AdSV) and 5 × 10⁻¹⁰–6 × 10⁻⁸ mol L⁻¹ by square wave adsorptive stripping voltammetry (SW AdSV). Repeatability, precision and accuracy of the developed methods were checked. The detection and quantification limits were found to be 1.8 × 10⁻¹⁰ and 6.2 × 10⁻¹⁰ mol L⁻¹ for LS AdSV and 4.9 × 10⁻¹¹ and 1.6 × 10⁻¹⁰ mol L⁻¹ for SW AdSV, respectively. The method was applied for the determination of famotidine in urine.     

Square-wave adsorptive stripping voltammetric determination of an antihistamine drug astemizole

The square-wave voltammetric technique was used to explore the adsorption properties of the astemizole drug. The analytical methodology used was based on the adsorptive preconcentration of the drug on a hanging mercury drop electrode (HMDE), followed by the electrochemical reduction process which yielded a well-defined cathodic peak at −1.184 V (vs. the Ag/AgCl electrode). To achieve high sensitivity, various experimental and instrumental variables were investigated such as the supporting electrolyte, pH, accumulation time and potential, drug concentration, scan rate, SW frequency, pulse amplitude, convection rate, and the working electrode area. Under the optimized conditions, the AdSV peak current was proportional over the analyte concentration range of 5 × 10⁻⁷ to 2.5 × 10⁻⁶ mol L⁻¹ (r = 0.998) with the detection limit of 1.4 × 10⁻⁸ mol L⁻¹ (6.4 ng mL⁻¹). The precision of the proposed method in terms of RSD was 2.4 %, whereas the method accuracy was indicated by the mean recovery of 100.1 %. Possible interferences of several substances usually present in the pharmaceutical tablets and formulations were also evaluated. The applicability of this electroanalytic approach was illustrated by the determination of astemizole in tablets and biological fluids.     

Determination of traces of gallium based on stripping voltammetry with adsorptive accumulation

Trace levels of gallium can be quantified by linear-sweep voltammetry after absorptive preconcentration of the gallium/solochrome violet RS chelate on the hanging mercury-drop electrode. The interfacial and redox behaviors are evaluated by cyclic voltammetry. The adsorbed chelate yields two distinct reduction peaks that can be utilized to quantify gallijm. The effects of preconcentration time and potential, dye concentration, bulk concentration of gallium, and other variables on the chelate peaks are investigated. For a 2-min preconcentration time, the detection limit is 0.08 μg l^?1. With preconcentration for 60 s, calibration plots are linear for the range 0–16 μg ml^?1 gallium. Possible interferences by other trace metals and surface-active organic materials are investigated. Gallium added to samples of sea and rain water was quantified readily.     

Stripping voltammetric determination of lead using a glassy-carbon electrode system

The effect of the electrochemical pretreatment of the surface of a glassy-carbon indicator electrode on the electrode response and the repeatability of measurements in the stripping voltammetric determination of lead was studied. It was shown that the analytical signal depends on the nature of an electrolyte used for the pretreatment. The electrolytes that gave the most satisfactory results in the pretreatment were proposed     

依诺沙星在碳糊电极上的阳极吸附伏安法研究

在0.40 mol/L的NaAc-HAc(pH 4.5)缓冲液中,使用JP-303极谱分析仪,依诺沙星在碳糊电极(CPE)上有一灵敏的吸附伏安氧化峰,峰电位为1.17 V(vs.SCE).该氧化峰的二阶导数峰电流与依诺沙星的浓度在4.0×10-9～4.0×10-7 mol/L(富集90 s)范围内呈良好的线性关系,相关系数为0.995,检出限为2.0×10-9 mol/L(S/N=3,富集110 s).探讨了依诺沙星在碳糊电极上的伏安性质和电极反应机理,并且用于诺佳胶囊中依诺沙星的测定.     

Determination of traces of EDTA, EGTA and DCTA by adsorptive accumulation of their complexes with hg(ii) followed by cathodic stripping

The strong adsorption of the Hg(II) complexes of EDTA, DCTA and EGTA on a hanging mercury-drop electrode has been utilized in two procedures for cathodic-stripping determination of these complexing agents in water. The first procedure allows the determination of the free ligands or the total amount of 'available' metal. The second, which requires addition of excess of Hg(II) to the solution, gives the total amount of the ligand. The detection limit is 1 x 10(-8)M in the final solution at pH 4-6.     

Cathodic adsorptive stripping voltammetric determination of uranium with potassium hydrogen phthalate

The adsorption properties of dioxouranium (II)-Phathalate complexes onto hanging mercury drop electrode are exploited in developing a highly sensitive and selective stripping voltammetric procedure for the determination of uranium (VI). The reduction current of adsorbed complex ions of U(VI) was measured by both linear sweep (LSCSV) and differential pulse cathodic stripping voltammetry (DPCSV), preceded by a period of preconcentration onto the electrode surface. As low as 2x10(-9) mol dm(-3) (0.5 mug/l) and 2x10(-8) mol dm(-3) (4.8 mug/l) with accumulation time 240 and 120 s using DPCSV and LSCSV, respectively, have been determined successfully. The relative standard deviation of 2.2% at the 5 ppm level was obtained. The interferences of some metal ions and anions were studied. The application of this method was tested in the determination of uranium in superphosphate fertilizer.     

Polarographic determination of metal traces in gallium

Summary A method is proposed for determination of zinc, indium, lead and copper in gallium. The method is based on the ability of the metals to transfer from gallium into mercury. The gallium sample is placed on the stationary mercury-drop electrode. The voltammetric curve is recorded while the potential is scanned from –1.3 V to less negative values. The metal content is calculated from the peak area for the oxidation process.

---

Polarographische Bestimmung von Metallspuren in Gallium

Zusammenfassung Ein Verfahren zur Bestimmung von Zink, Indium, Blei und Kupfer in Gallium wurde angegeben. Es beruht auf der Fähigkeit dieser Metalle, aus Gallium in Quecksilber überzugehen. Die Probe wird auf eine stationäre Quecksilber-Tropf-Elektrode gebracht. Während das Potential von –1,3V zu weniger negativen Werten verändert wird, erfolgt die Aufzeichnung der voltammetrischen Kurve. Aus den Peakflächen, die dem Oxydationsvorgang entsprechen, wird der Metallgehalt berechnet.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

The catalytic adsorptive stripping voltammetric determination of chromium with DTPA and nitrate

Summary The catalytic adsorptive stripping voltammetric determination of chromium using diethylenetriaminepentaacetic acid (DTPA) is only possible when chromium(III) is preliminarily oxidized to chromium(VI) which can be accomplished by UV-irradiation of the oxygen saturated solution at pH 6.0–7.0. A chromium(III)-chromium(VI) speciation can be performed in the range 10^–10 mol/l upto 10^–6 mol/l employing the coprecipitation of chromium(III) with Al(OH)₃. The interference of other metal ions was also studied.     

The catalytic adsorptive stripping voltammetric determination of chromium with TTHA and nitrate

A sensitive voltammetric method is presented for the determination of trace amounts of total chromium (Cr(III) and Cr(VI)) in natural waters, employing the square wave mode. The method is based on the preconcentration of the Cr(III)-TTHA complex by adsorption at the HMDE at the potential of –1.0 V vs. Ag/AgCl. The adsorbed complex is then reduced producing a response with a peak potential of –1.29 V and the peak height of the Cr(III) reduction is measured. The catalytic action of the nitrate ions on the Cr(III)-TTHA reduction has been elucidated using cyclic voltammetry. The adsorption of chromium complexes at the HMDE was investigated using out-of-phase a.c. voltammetry and the potential range of adsorption was determined.Based on these investigations optimal conditions for the determination of the total chromium concentration in the range 155–2000 ng 1^–1 have been established. The determination limit is 15 ng 1^–1 and the RSD is 3.5% for chromium concentrations 200 ng 1^–1.The usefulness and wide scope of this method for reliable and highly sensitive chromium analysis down to the ultra trace levels existing in various types of natural waters is demonstrated by determinations of the total chromium content in lake, sea and rain water.