An aptamer-based biosensor for sensitive thrombin detection

A sensitive aptamer-based sandwich-type sensor is presented to detect human thrombin using quantum dots as electrochemical label. CdSe quantum dots were labeled to the secondary aptamer, which were determined by the square wave stripping voltammetric analysis after dissolution with nitric acid. The aptasensor has a lower detection limit at 1 pM, while the sample consumption is reduced to 5 μl. The proposed approach shows high selectivity and minimizes the nonspecific adsorption, so that it was used for the detection of target protein in the human serum sample. Such an aptamer-based biosensor provides a promising strategy for screening biomarkers at ultratrace levels in the complex matrices.     

Biocentri-voltammetric biosensor for acetylcholine and choline

We report on the determination of choline and acetylcholine via biocentrivoltammetry. This method combines centrifugation and voltammetry and is based on a carbon paste electrode modified with acetylcholinesterase and choline oxidase. The electrode was placed at the bottom of a biocentrivoltammetric cell. Acetylcholine and choline are accumulated on the enzyme electrode via centrifugative forces, upon which a direct voltammetric scan is applied. Reaction time, pH values, quantities of enzyme and centrifugation parameters were optimized. A linear response is obtained in the 0.07 to 10?μM concentration range of acetylcholine, and a limit of detection as low as 0.5?μM. The linear range is between 0.1 and 500?μM for choline. The method was applied to the determination of acetylcholine and choline in spiked serum samples.

A supercoiled DNA-modified mercury electrode-based biosensor for the detection of DNA strand cleaving agents

DNA-damaging agents in the environment represent a serious danger to human health. We use a supercoiled DNA-modified mercury electrode as a fast-response biosensor for the detection of DNA strand cleaving agents. The sensor is based on a strong difference between the a.c. voltammetric responses of covalently closed circular (supercoiled) and of open circular (nicked) plasmid DNA. We show that the sensor can detect hydroxyl radicals in laboratory-prepared solutions and in various natural and industrial water samples. The sensor is also capable of detecting unknown DNA-damaging agents in industrial waters.     

An SPR biosensor for the detection of microcystins in drinking water

A surface plasmon resonance (SPR) biosensor for the detection of microcystins (MCs) in drinking water has been developed. Several assay formats have been evaluated. The selected format is based on a competitive inhibition assay, in which microcystin-LR (MCLR) has been covalently immobilized onto the surface of an SPR chip functionalized with a self-assembled monolayer. The influence of several factors affecting sensor performance, such as the nature and concentration of the antibody, the composition of the carrier buffer, and the blocking and regeneration solutions, has been evaluated. The optimized SPR biosensor provides an IC₅₀ 0.67 ± 0.09 μg L⁻¹, a detection limit of 73 ± 8 ng L⁻¹, and a dynamic range from 0.2 to 2.0 μg L⁻¹ for MCLR. Cross-reactivity to other related MCs, such as microcystin-RR (88%) and microcystin-YR (94%), has also been measured. The SPR biosensor can perform four simultaneous determinations in 60 min, and each SPR chip can be reused for at least 40 assay–regeneration cycles without significant binding capacity loss. The biosensor has been successfully applied to the direct analysis of MCLR in drinking water samples, below the provisional guideline value of 1 μg L⁻¹ established by the World Health Organization for drinking water.     

An impedance array biosensor for detection of multiple antibody-antigen interactions

Electrochemical impedance spectroscopy (EIS) combined with a gold electrode array was developed to detect multiple antibody-antigen interactions. Hepatitis B surface antigen (HBsAg), as a model sample, was employed to evaluate the characteristics of the biosensor. The array was fabricated by immobilizing antibodies on the self-assembled molecules surface of the electrodes. The surface characteristics of the array during the binding process including the antibody-antigen conjugation and the sandwich complex with HRP-labeled antibody, as well as the precipitation layer, were characterized by atomic force microscopy (AFM) and electrochemical impedance spectroscopy, respectively. A linear relationship between electron-transfer resistance and the concentrations of HBsAg ranged from 10 pg ml(-1) to 1 ng ml(-1) and the detection limit of 10 pg ml(-1) was obtained. 100 pg ml(-1) antigen samples, such as rat IgG, HBsAg and HBeAg, as well as the antigen mixture, were incubated with the relative antibody-modified electrodes on the array. No obvious cross-talk reaction was observed. All these results confirm the feasibility of applying electrochemical impedance spectroscopy to the electrode array.     

An optical biosensor for rapid and label-free detection of cells

We report a broadly applicable optical method for rapid and label-free detection of as few as 45 cells. In this method, bacterial cells are detected by measuring the amount of laser light transmitted through a small glass well functionalized with antibodies which specifically recognize and capture the cells. The described approach is simple, rapid, economical, and promising for portable and high-throughput detection of a wide variety of pathogenic and infectious cells.     

乙酰胆碱和胆碱化学发光生物传感器的研究

将具有分子识别功能的乙酰胆碱酯酶和胆碱氧化酶及进行换能反应的luminol和Cu^2^+分别固定在多孔玻璃和离子交换剂的柱中,组成流动注射式胆碱和乙酰胆碱化学发光传感器,让传感器分子识别反应和换能反应在各自最佳pH值下进行。这一新型生物传感器优化了发光量子产率,避免了在传感元件上直接发光所产生的散射干扰。测定乙酰胆碱和胆碱的线性范围达到1～1000pmol,检测限为500fmol,每次测定时间为2min,寿命为6个月,已用于鼠脑及人血清中乙酰胆碱和胆碱的测定。     

An RNA aptamer-based electrochemical biosensor for detection of theophylline in serum

An electrochemical RNA aptamer-based biosensor for rapid and label-free detection of the bronchodilator theophylline was developed. The 5'-disulfide-functionalized end of the RNA aptamer sequence was immobilized on a gold electrode, and the 3'-amino-functionalized end was conjugated with a ferrocene (Fc) redox probe. Upon binding of theophylline the aptamer switches conformation from an open unfolded state to a closed hairpin-type conformation, resulting in the increased electron-transfer efficiency between Fc and the electrode. The electrochemical response, which was measured by differential pulse voltammetry, reaches saturation within a few minutes after addition of theophylline, and the dynamic range for detecting theophylline is 0.2-10 muM. The electrode displays an inhibited response when applied directly in serum samples treated with RNase inhibitors; however a full response to the theophylline serum concentration was obtained by transferring the electrode to blank serum-free buffer solutions. It was demonstrated that theophylline is detected with high selectivity in the presence of caffeine and theobromine.     

An in situ amperometric biosensor for the detection of vapours from explosive compounds

An amperometric biosensor based on genetically-modified enzymes was used for the in situ detection of trace vapours from a number of explosive compounds. The vapour samples that were generated from a purpose-built vapour generator were collected and pre-concentrated using a trap able to concentrate samples at a rate of 60-fold per minute of sampling. The amperometric biosensor achieved a remarkably low vapour detection limit of 6 parts per trillion from a room temperature sample. The specific activity of the reported enzyme toward a number of explosive compounds was also confirmed using absorbance measurements.     

Capacitive biosensor for detection of endotoxin

A capacitive biosensor for the detection of bacterial endotoxin has been developed. Endotoxin-neutralizing protein derived from American horseshoe crab was immobilized to a self-assembled thiol layer on a biosensor transducer (Au). Upon injection of a sample containing endotoxin, a decrease in the observed capacitive signal was registered. Endotoxin could be determined under optimum conditions with a detection limit of 1.0 × 10⁻¹³ M and linearity ranging from 1.0 × 10⁻¹³ to 1.0 × 10⁻¹⁰ M. Good agreement was achieved when applying endotoxin preparations purified from an Escherichia coli cultivation to the capacitive biosensor system, utilizing the conventional method for quantitative endotoxin determination, the Limulus amebocyte lysate test as a reference. The capacitive biosensor method was statistically tested with the Wilcoxon signed rank test, which proved the system is acceptable for the quantitative analysis of bacterial endotoxin (P < 0.05). Figure The flow-injection capacitive biosensor system and the capacitive properties of the transducer surface, where C_SAM is the capacitance change of the self-assembled thiol monolayer, C_P is the capacitance change of the protein layer, C_a is the capacitance change of the analyte layer and C_Total is the total capacitance change measured at the working electrode/solution interface (modified from Limbut et al., 2006. Biosens Bioelectron 22: 233-240)     

Array biosensor for detection of toxins

The array biosensor is capable of detecting multiple targets rapidly and simultaneously on the surface of a single waveguide. Sandwich and competitive fluoroimmunoassays have been developed to detect high and low molecular weight toxins, respectively, in complex samples. Recognition molecules (usually antibodies) were first immobilized in specific locations on the waveguide and the resultant patterned array was used to interrogate up to 12 different samples for the presence of multiple different analytes. Upon binding of a fluorescent analyte or fluorescent immunocomplex, the pattern of fluorescent spots was detected using a CCD camera. Automated image analysis was used to determine a mean fluorescence value for each assay spot and to subtract the local background signal. The location of the spot and its mean fluorescence value were used to determine the toxin identity and concentration. Toxins were measured in clinical fluids, environmental samples and foods, with minimal sample preparation. Results are shown for rapid analyses of staphylococcal enterotoxin B, ricin, cholera toxin, botulinum toxoids, trinitrotoluene, and the mycotoxin fumonisin. Toxins were detected at levels as low as 0.5 ng mL^–1.     

Chlorophyll fluorescence biosensor for the detection of herbicides

A biosensor is described for the detection of triazine and phenylurea herbicides in drinking water by kinetic measurements of endogenous chlorophyll fluorescence in isolated chloroplasts from higher plants. The pocket-size device uses a diode laser for simultaneous excitation of sample and reference channels, and photodiodes for detection of the emitted light. The biological material can be supplied as a freeze-dried powder, stable for 21 days at room temperature, for 6 weeks at 4 ( degrees )C or for at least 9 months at -20 ( degrees )C. The detection of 0.1 microg/l of a single herbicide, as required by European Community legislation on drinking water quality, can be achieved without prior extraction of the sample.     

An amplification-free ultra-sensitive electrochemical CRISPR/Cas biosensor for drug-resistant bacteria detection

Continued development of high-performance and cost-effective in vitro diagnostic tools is vital for improving infectious disease treatment and transmission control. For nucleic acid diagnostics, moving beyond enzyme-mediated amplification assays will be critical in reducing the time and complexity of diagnostic technologies. Further, an emerging area of threat, in which in vitro diagnostics will play an increasingly important role, is antimicrobial resistance (AMR) in bacterial infections. Herein, we present an amplification-free electrochemical CRISPR/Cas biosensor utilizing silver metallization (termed E-Si-CRISPR) to detect methicillin-resistant Staphylococcus aureus (MRSA). Using a custom-designed guide RNA (gRNA) targeting the mecA gene of MRSA, the Cas12a enzyme allows highly sensitive and specific detection when employed with silver metallization and square wave voltammetry (SWV). Our biosensor exhibits excellent analytical performance, with detection and quantitation limits of 3.5 and 10 fM, respectively, and linearity over five orders of magnitude (from 10 fM to 0.1 nM). Importantly, we observe no degradation in performance when moving from buffer to human serum samples, and achieve excellent selectivity for MRSA in human serum in the presence of other common bacteria. The E-Si-CRISPR method shows significant promise as an ultrasensitive field-deployable device for nucleic acid-based diagnostics, without requiring nucleic acid amplification. Finally, adjustment to a different disease target can be achieved by simple modification of the gRNA protospacer.

An amplification-free electrochemical CRISPR/Cas biosensor utilizing silver metallization (termed E-Si-CRISPR) allows detection of methicillin-resistant Staphylococcus aureus (MRSA) with excellent sensitivity and specificity.     

Impedimetric biosensor for cancer cell detection

Electrochemical impedance spectroscopy was evaluated for the label free detection of MCF-7 cancer cell in which c-erbB-2 receptor is overexpressed on the cell surfaces. Anti-c-erbB-2, used as a specific antibody, was immobilized on electrogenerated polypyrrole-NHS on electrodes via covalent linking. The polymer formation, the grafting of the antibody, and the recognition event with the cancer cells using MCF-7 as a model cell line, were characterized by using cyclic voltammetry and fluorescence microscopy. The impedimetric sensor showed high sensitivity from 100 to 10 000 cell/mL without needing any labeling step and represents an efficient transduction method for cell selective detection.     

An electrochemical biosensor for direct detection of DNA using polystyrene-g-soya oil-g-imidazole graft copolymer

A label-free electrochemical DNA biosensor was developed through the attachment of polystyrene-g-soya oil-g-imidazole graft copolymer (PS-PSyIm) onto modified graphene oxide (GO) electrodeposited on glassy carbon electrode (GC). GC/GO electrode was initially functionalised via electrochemical reduction of 4-nitrobenzene diazonium salt, followed by the electrochemical reduction of NO₂ to NH₂. Subsequent to the electrochemical deposition of gold nanoparticles on modified surface, the attachment of the PS-PSyIm graft copolymer on the resulting electrode was achieved. The interaction of PS-PSyIm with DNA at the bare glassy carbon electrode was studied by cyclic voltammetry technique, and it was found that interaction predominantly takes place through intercalation mode. The selectivity of developed DNA biosensor was also explored by DPV on the basis of considering hybridisation event with non-complementary, one-base mismatched DNA and complementary target DNA sequence. Large decrease in the peak current was found upon the addition of complementary target DNA. The sensitivity of the developed DNA biosensor was also investigated, and detection limit was found to be 1.20 nmol L^?1.     

Glutathione-s-transferase based electrochemical biosensor for the detection of captan

The proposed electrochemical biosensor based on the inhibition of glutathione-s-transferase (GST) onto SAM modified gold due to captan was developed and determined by CV technique. The bioelectrode exhibited improved fast response time (12 s) with the detection limits 0.25–16 ppm, percentage inhibition >72% and high sensitivity 4.5 uA/ppm at standard optimal conditions. The recovery experiment results were found between 77% and 144% from spiked water sources. The bioelectrode was regenerated by DTT and reusable. The bioelectrodes were characterized by UV–visible, CV, AFM and STM. Thus, the proposed electrochemical biosensor is not only detected captan but also its metabolite and promising for real-time analysis of small molecules of environmental interest.     

Immobilised tyrosinase-based biosensor for the detection of tea polyphenols

An amperometric principle-based biosensor containing immobilized enzyme tyrosinase has been used for detection of polyphenols in tea. The immobilized tyrosinase-based biosensor could detect tea polyphenols in the concentration range 10–80 mmol L⁻¹. Immobilization of the enzyme by the crosslinking method gave good stable response to tea polyphenols. The biosensor response reached the steady state within 5 min. The voltage response was found to have a direct linear relationship with the concentration of polyphenols in black tea samples. Enzyme membrane fouling was observed with number of analyses with a single immobilised enzyme membrane. The tyrosinase-based biosensor gave maximum response to tea polyphenols at 30°C. The optimum pH was 7.0. This biosensor system can be applied for analysis of tea polyphenols. Variation in the biosensor response to black tea infusions gave an indication of the different amounts of theaflavins in the samples, which is an important parameter in evaluating tea quality. A comparative study of the quality attributes of a variety of commercially available brands of tea were performed using the biosensor and conventional analytical techniques such as spectrophotometry.     

A novel amperometric biosensor based on single walled carbon nanotubes with acetylcholine esterase for the detection of carbaryl pesticide in water

Amperometric biosensor is fabricated for the detection of carbaryl based on single walled carbon nanotubes (SWCNTs) and acetylcholine esterase (AchE). The dispersion of SWCNTs in positively charged polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA), possibly takes place due to weak supramolecular interaction between them, which then binds electrostatically to the negatively charged AchE at pH 7.4 using layer-by-layer (LbL) self-assembly technique. The optical intensity of UV/vis spectra increased with the number of layers, indicating the build up of a multilayer coating on the electrode. The activity of acetylcholine esterase on modified electrode of 3 mm in diameter was found to be 0.2 U. The biosensor showed good sensitivity and stability towards the monitoring of carbaryl pesticides in water with the detection limit of 10⁻¹² g L⁻¹ and recovery of 99.8 ± 2.7% to 10⁻¹⁰ g L⁻¹. This protocol can be used for the immobilization of other enzymes to fabricate a range of biosensors.