Electrochemical reduction of uracil in dimethyl sulfoxide: Autoprotonation of the anion radical

The electrochemical reduction of uracil in dimethyl sulfoxide was investigated, using d.c.and a.c. polarography, cyclic voltammetry, and controlled potential electrolysis. Uracil is reduced in a one-electron step (E_1/2=?2.3 V); the apparent number of electrons transferred (n) decreases from one at infinite dilution to one-half at concentrations above 1mM. The concentration dependent n-value is due to proton transfer by the parent compound to the radical anion formed on reduction. Such a proton transfer, which has been observed for 2-hydroxypyrimidine, deactivates part of the uracil, which would otherwise be available for reduction, by formation of the more difficultly reducible conjugate base. The uracil anion forms insoluble mercury salts, producing two oxidation waves (E_1/2 of ?0.1 and ?0.3 V); the latter wave is due to formation of a passivating film on the electrode. Digital simulations indicate that the protonation rate exceeds 10⁵M^?1 s^?1 and that, at low uracil concentration, some of the free radical formed on protonation is further reduced. At concentrations exceeding 1 mM, all of the free radical dimerizes. The effect of added acids and base on the electrochemical behavior is described.     

Voltammetric study on interaction of cysteine with type I-collagen in the aqueous medium

Interaction of cysteine with type I-collagen from bovine achilles tendon in the aqueous solutions has been examined using square wave voltammetry (SWV) and cyclic voltammetry (CV) techniques. In the absence of cysteine, type I-collagen gives a reversible peak at ?0.114 V in Britton-Robinson (B-R) buffer (pH 4.0). The electrochemical parameters (I _p/f, E _p/f, E _p/pH, I _p/pH, I _p/v, I _p/v^1/2) of type I-collagen have been also studied. In addition, it has been determined that there is a linear relationship between current and concentration of type I-collagen. On the other hand, cysteine exhibits a reversible peak at ?0.383 V due to the reduction of mercurous cysteine thiolate. By using a hanging mercury drop electrode in aqueous solutions, SWV and CV voltammograms obtained for type I-collagen in the presence of cysteine indicate that there is an interaction between type I-collagen and cysteine. In the presence of cysteine, peak current of type I-collagen decreases and a new peak is observed at ?0.121 V for cysteine which is bonded to type I-collagen.     

Electrochemical Evaluation of Nucleoside Analogue Lamivudine in Pharmaceutical Dosage Forms and Human Serum

Lamivudine (LAM) is a synthetic nucleoside analogue with activity against human immunodeficiency virus‐type 1 (HIV‐1) and Hepatitis B virus (HBV). The aim of this study was to determine LAM levels in serum and pharmaceutical formulations, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, LAM undergoes irreversible reduction at the peak potential near E_p?1.26 V (vs. Ag/AgCl/3 M KCl). Reduction LAM signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square‐wave voltammetry (OSW). DPV and OSW techniques for the determination of LAM in acetate buffer at pH 4.5, which allows quantitation over the 4×10^?6 to 1×10^?4 M range in supporting electrolyte for both methods, were proposed. The linear response was obtained in acetate buffer in the ranges of 2×10^?6 to 2×10^?4 M for spiked serum samples at pH 4.5 for both techniques. The repeatability and reproducibility of the methods for all media were determined. The standard addition method was used in serum. Precision and accuracy were also checked in all media. No electroactive interferences from the endogenous substances were found in serum. With respect to side effects of high doses and short half‐life of LAM, a fast and simple detection method is described in this study.     

Investigation of Electrochemical Behavior of Some Dithiophosphonates in Acetonitrile on the Platinum and Gold Electrodes

Some dithiophosphonate derivatives were synthesized and the electrochemical reduction mechanism was investigated by cyclic voltammetry (CV), square wave voltammetry (SWV) and chronoamperometry (CA) in 0.1 M tetrabutylammoniumtetrafluoroborate (TBATFB) in acetonitrile at platinum (Pt) and gold (Au) electrodes. Dithiophosphonates showed a cyclic voltammetric reduction peak at about ?1.1 V at Pt and ?1.3 V at Au electrode (vs. Ag/Ag⁺) in this media. It was also shown that dithiophosphonates can be determined quantitatively in acetonitrile using a calibration graph. The number of electrons transferred were calculated as 2 using ferrocene as a reference compound at the UME electrode. Mechanism of dithiophosphonates was also examined on Pt and Au electrodes and electrochemical reduction of dithiophosphonates seems to follow an EC mechanism with an irreversible electron transfer step. The reaction product in the bulk electrolysis experiment was isolated and identified using proton‐coupled P‐31 NMR, ¹³C‐NMR and IR spectroscopy. The adsorption tests for dithiophosphonates were revealed that no strong or weak adsorption phenomena exist on both Pt and Au electrodes. Simulation curves were acquired by DigiSim 3.03 version to investigate the reduction mechanism and to estimate the kinetic parameters for electrochemical and chemical steps.     

OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

The electroreduction of heptaphenyltropylium ion to the free radical in acetonitrile

The reduction of heptaphenyltropylium ion (HPT⁺) in acetonitrile solutions containing 0.1 M tetra-n-butylammonium perchlorate at a platinum electrode was studied by cyclic voltammetry and controlled potential coulometry. A reversible wave for the production of the free radical at ?1.20 V vs. SCE was observed. The radical was stable on the voltammetric time scale (～ seconds) but decayed slowly. The production of a dimeric species involving coupling via the phenyl groups and reducible at about ?1.9 V is proposed.     

Mechanistic – Kinetic Scheme of Oxidation/Reduction of TEMPO Involving Hydrogen Bonded Dimer. RDE Probe for Availability of Protons in Reaction Environment

Mechanistic – kinetic studies on the electrochemical oxidation/reduction process of radical TEMPO (2,2,6,6‐tetramethylpiperidine‐1‐oxyl) under ionic strength (0.1 M, 1.0 M) and pH (0, 7) of aqueous perchlorate electrolyte (NaClO₄‐HClO₄) have been undertaken. Analytical and/or digital simulation methods for voltammetry at stationary (CV) and rotating electrode (RDE) have allowed one to determine numerical values of twelve parameters characterizing two electrode reactions (oxidation and reduction of the radical) and three chemical reactions (protonation, disproportionation, dimerization involving the radical and/or electrogenerated species). A potential window of the measurements was 0.6 V and it corresponded to that where the oxidation wave of TEMPO in neutral aqueous solution is situated. To account for the observed pH effect, the hydrogen bonded dimer resulting from the radical reactant and the protonation product of its reduction has been postulated to form in solution near the electrode surface. The RDE voltammetric discernables of the TEMPO process (i.e., absolute RDE wave current, zero RDE current potential, oxidation and reduction limiting RDE currents) can be considered good candidates for a use to follow acidity of complex reactive media.     

Determination of Rutin in Drinks Using an Electrode Modified with Carbon Nanotubes-Prussian Blue

A new sensor was developed using a screen-printed carbon electrode modified with single-walled carbon nanotubes (SWCNTs) and Prussian blue (PB) coated with chitosan. The modified electrode allowed the oxidation and reduction of rutin at 0.25 and 0.096 V, respectively, with a ΔE of 0.154 V. Furthermore, the peak currents increase nearly 100% compared with the electrode without modification. The process was more reversible compared with the electrode modified with only SWCNTs or PB. Cyclic voltammetry was used to characterize the modified electrode surface. The quantification of rutin was more sensitive with adsorptive stripping voltammetry than with anodic stripping voltammetry. Adsorption potential, adsorption time and pH were optimized based on the oxidation of rutin: E_ads =–0.10 V, t_ads = 60 s, pH 3.0. The detection limit (3σ/b) was 0.01 μM and the relative standard derivation was 3%. The new sensor was used in the quantification of rutin in black tea, coffee and synthetic drink of tea with satisfactory results.     

Direct electrochemistry of myoglobin in a layer-by-layer film on an ionic liquid modified electrode containing CeO2 nanoparticles and hyaluronic acid

We describe an ionic liquid modified electrode (CPE-IL) for sensing hydrogen peroxide (HP) that was modified by the layer-by-layer technique with myoglobin (Mb). In addition, the surface of the electrode was modified with CeO₂ nanoparticles (nano-CeO₂) and hyaluronic acid. UV-vis and FTIR spectroscopy confirmed that Mb retains its native structure in the composite film. Scanning electron microscopy showed that the nano-CeO₂ closely interact with Mb to form an inhomogeneously distributed film. Cyclic voltammetry reveals a pair of quasi-reversible redox peaks of Mb, with the cathodic peak at ?0.357?V and the anodic peak at ?0.269?V. The peak separation (??E _p) and the formal potential (E ^0??) are 88?mV and ?0.313?V (vs. Ag/AgCl), respectively. The Mb immobilized in the modified electrode displays an excellent electrocatalytic activity towards HP in the 0.6 to 78.0???M concentration range. The limit of detection is 50?nM (S/N?=?3), and then the Michaelis-Menten constant is 71.8???M. We believe that such a composite film has potential to further investigate other redox proteins and in the fabrication of third-generation biosensors.

Electrocatalytic reduction of O2 at pyrolytic graphite electrode modified by a novel copper(II) complex with 2-[bis(2-aminoethyl)amino]ethanol and imidazole ligands

A new complex formed by Cu(II) with 2-[bis(2-aminoethyl)amino]ethanol and imidazole is prepared, and its electrochemical properties are studied. The electrochemical experiments are carried out in deaerated pH 7.0 buffer solution through cyclic voltammetry by scanning the potential from 0.1 to −0.5 V with this copper(II) complex-modified electrode as the working electrode. One redox process is observed, which could be assigned to Cu(II)/Cu(I). The formal potential E _0′ = (E _pa + E _pc)/2, where E _pa and E _pc are anodic and cathodic peak potentials, is −248 mV vs. SCE. A straight line, obtained from the plot of I _pc vs. v, indicated a surface-controlled reaction. The modified electrode is very stable and exhibits catalytic activity for oxygen reduction. The possible mechanism for the catalytic reduction of oxygen is studied by cyclic voltammetry and chronoamperometry. The results show that the dioxygen is reduced via a pathway of four-electron reduction to form water. Chronoamperometric measurements show the potentiality of the use of this working electrode as an amperometric sensor for dissolved dioxygen in aqueous media. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 8, pp. 975–979. The text was submitted by the authors in English.     

Electroreduction of Oxygen and Electrooxidation of Methanol at Carbon and Single Wall Carbon Nanotube Supported Platinum Electrodes

The present research aimed at investigating the electrocatalytic properties and the electrochemical deposition of Pt nanoparticles on carbon powder, carbon nanotube and preparation of carbon and single wall carbon nanotube supported platinum electrodes. The Pt nanoparticles were synthesized by electroreduction of hexachloroplatinic acid in aqueous solution at ?200 mV. Electrocatalytic properties of the modified electrodes for oxygen reduction were investigated by cyclic voltammetry in O₂ saturated solution containing 0.1 M HClO₄. Methanol electrooxidation at the modified surfaces in 0.5 M HCLO₄ was studied by cyclic voltammetry. The corresponding results showed that the Pt/SWCNT/GC electrode exhibits more improved catalytical activity than the Pt/C/GC electrode.     

Palladium Nanoclusters Uniformly Enveloped Electrochemically Activated Graphene for Highly Sensitive Hydrogen Peroxide Sensor

Nonenzymatic sensors based on a metals nanocomposite with high sensitivity, selectivity, and stability has been received considerable interest. In this study, a novel electrochemical nanocomposite sensor based on palladium nanoclusters (PdNCs) decorated electrochemically activated graphene (EAGr) was established for highly sensitive nonenzymatic H₂O₂ sensor. The PdNCs/EAGr nanocomposite was fabricated via an electrochemical activation of Gr by the potential cycling in the range of +0.6 to ?1.8 V, followed by the electrodeposition of PdNCs at ?0.4 V applied potential. The homogeneous dispersion of PdNCs/EAGr nanocomposite were characterized by scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and linear sweep voltammetry (LSV). The PdNCs/EAGr nanocomposite electrode showed higher electrocatalytic activity towards the reduction of H₂O₂ in pH 7.0 of 0.1 M PBS by significantly enhancing the reduction peak current and reduced the reduction overpotential as well as eliminated other interfering species responses. The PdNCs/EAGr electrode displayed a wide linear range for H₂O₂ reduction from 1.0 to 1100 μM with limit of detection 0.02±0.01 μM. The higher sensitivity and selectivity as well as long‐time stability and excellent reproducibility obtained, indicating the proposed sensor is an effective H₂O₂ based sensor. In addition, the analytical application of the nancomposite sensor was successfully examined for the determination of H₂O₂ in the real sample of human urine indicating that the appreciable practicality of the nonenzymatic sensor for the determination of H₂O₂ in physiological fluids.     

Electrocatalytic dechlorination of chloroacetic acids by silver nanoparticles modified glassy carbon electrode

A simple potentiostatic method was employed to prepare silver nanoparticles deposited on glassy carbon electrode. The silver nanoparticles exhibit extraordinary electrocatalytic activities toward the reduction process of chloroacetic acids. The electrochemical behavior of trichloroacetic acid, dichloroacetic acid, and monochloroacetic acid has been investigated by cyclic voltammetry at the silver nanoparticles-modified glassy carbon electrode in 0.1 M LiClO₄ solution; each compound exhibits a series of reduction peaks which represent sequential dechlorination steps up to acetic acid. The electrocatalytic dechlorination mechanism for chloroacetic acids was also discussed in this work.     

Electrochemical Determination of Transmembrane Protein Na+/K+‐ATPase and Its Cytoplasmic Loop C45

Electrochemistry of membrane proteins is complicated by the fact that the studied substances are poorly soluble or insoluble in aqueous environment. The solubilization of proteins using surfactants (detergents) affects the electrochemical analysis or even renders it impossible. In the present study, the electrochemistry of the transmembrane protein Na⁺/K⁺‐ATPase (NKA) and its water‐soluble isolated cytoplasmic loop C45 is described. The proteins were studied using adsorptive transfer cyclic voltammetry and square‐wave voltammetry on basal‐plane pyrolytic graphite electrode (PGE) as well as constant‐current chronopotentiometric stripping analysis on hanging mercury drop electrode (HMDE). The nonionic surfactant octaethylene glycol monododecyl ether (C₁₂E₈) was used for NKA solubilization. Under these conditions the oxidation currents of Tyr and Trp (peak Y: +0.55 V and peak W: +0.7 V, vs. Ag/AgCl/3 M KCl) and catalytic reduction currents (peak H: ?1.8 V) of NKA and C45 loop can be observed. Using the experimental procedures suggested in this study, we were able to investigate the oxidation, reduction and adsorption of NKA and C45 at femtomole level without the necessity of labeling by electroactive markers or techniques based on protein immobilization within the lipid bilayer attached to the electrode surface.     

Regression analysis of dependences of adsorption potential shifts on the charge in systems (Tl-Ga)/[N-methylformamide + mc KI + (1 − m)c KClO4], (Tl-Ga)/[N-methylformamide + mc KBr + (1 − m)c KClO4] and (Tl-Ga)/[N-methylformamide + mc KCl + (1 − m)c KClO4]

By the regression analysis of dependences of the adsorption potential shift (E _ads) on the electrode charge in systems (Tl-Ga)/[NMF + 0.1m M KI + 0.1(1 ? m) M KClO₄], (Tl-Ga)/[NMF + 0.1m M KBr + 0.1(1 ? m) M KClO₄], and (Tl-Ga)/[NMF + 0.1m M KCl + 0.1(1 ? m) M KClO₄] with the following m fractions of the surface-active anion: 0.05, 0.1, 0.2, 0.5, and 1, the adsorption parameters are calculated in terms of two models based on the Frumkin isotherm both considering the free adsorption energy as a quadratic function of the electrode charge, where one model takes into account the diffuse layer and the other ignores it. It is shown that for the studied electrode charges q ≤ 2 μC/cm², both models provide equal accuracy in calculating E _ads in the systems under study.     

Electrochemical Overoxidation of Polyindole and Its Cation‐Permselective Behavior

Polyindole films prepared by potentiostatic growth in dichloromethane solution were subjected to overoxidation studies in aqueous media. Overoxidation at potentials greater than 1.1 V (vs. SCE) in 0.1 M KNO₃ or 0.1 M H₂SO₄ was possible. Overoxidation in 0.1 M NaOH resulted in mechanically unstable films which were not adherent to the electrode surface. The overoxidation process in 0.1 M KNO₃ involved removal of one electron per four indole monomer moieties in the polymer film. Nucleophilic attack led to introduction of carboxylate functionality and to cation permselective behavior, as tested by cyclic voltammetry and hydrodynamic voltammetry of hexamminoruthenium(III) and hexacyanoferrate(III). Such films may be useful in various electrochemical sensor applications.     

Electrochemical and ESR study of the mechanism of oxidation of phenazine-di-N-oxide in the presence of cyclohexanol on glassy carbon and single-walled carbon nanotube electrodes

The mechanism of oxidation of phenazine-di-N-oxide in the presence of cyclohexanol was studied by cyclic voltammetry on glassy carbon (GC) and single-walled carbon nanotube (SWCNT) electrodes in 0.1 M LiClO₄ solutions in acetonitrile. The effect of cyclohexanol on the shape of the cyclic voltammograms of phenazine-di-N-oxide and the intensity of the ESR signal of its radical cation was investigated. It was shown by ESR that the products of the one-electron oxidation and reduction of phenazine-di-N-oxide were radical cations and anions. The catalytic currents were recorded during the oxidation of phenazine-di-N-oxide on the SWCNT and GC electrodes in the presence of cyclohexanol. The results were explained in terms of the E₁C₁E₂C₂ mechanism of the two-stage electrode process characterized by the catalytic current recorded at the second electrode stage. The overall two-electron catalytic oxidation of cyclohexanol in the complex with the phenazine-di-N-oxide radical cation was assumed to occur. It was shown that SWCNT electrodes can be used in the electrocatalytic oxidation of organic compounds in the presence of the electrochemically generated phenazine-di-N-oxide radical cation.     

Electrochemical Behavior of Irreversibly Adsorbed Sb on Au Electrode

The electrochemical processes of irreversibly adsorbed antimony (Sb_ad) on Au electrode were investigated by cyclic voltammetry (CV) and electrochemical quartz crystal microbalance (EQCM). CV data showed that Sb_ad on Au electrode yielded oxidation and reduction features at about 0.15 V (vs saturated calomel electrode, SCE). EQCM data indicated that Sb_ad species were stable on Au electrode in the potential region from −0.25 to 0.18 V (vs SCE); the adsorption of Sb inhibited the adsorption of water and anion on Au electrode at low electrode potentials. Sb₂O₃ species was suggested to form on the Au electrode at 0.18 V. At a potential higher than 0.20 V the Sb₂O₃ species could be further oxidized to Sb(V) oxidation state and then desorbed from Au electrode.     

Voltammetric determination of cysteine at a graphite electrode modified with gold nanoparticles

The electrochemical behaviour of cysteine (Cys) at a graphite electrode modified with gold nanoparticles (G-Au_nano electrode) was studied by cyclic voltammetry. It was found that the graphite electrode-Au nanoparticles show an electrocatalytic activity towards the oxidation of Cys in 0.1?M NaOH. At 0.05?V, there is an “inverse” maximum in the cathodic voltammogram of Cys. Using a G-Au_nano electrode, the dependence of the peak current of the “inverse” maximum on Cys concentration was linear in the range from 1 to 14?pM, and the detection limit was 0.6?pM. The proposed analytical method is simple, rapid and sensitive.     

Two-step cathodic synthesis of poly(para-phenylenevinylene)

The electrochemical behavior of a film, which consists of intermediate products of the α,α,α′,α′-tetrabromo-para-xylol (TBX) reduction and is deposited on a glassy-carbon electrode from 5 × 10^?2 M TBX solutions, is studied in 0.1 M Bu₄NBF₄ solution in DMFA by cycling the potential from 0 to ?1.4 V with respect to an aqueous saturated calomel electrode. When the potential is cycled from 0 to ?2.1 V in a cell filled with the supporting electrolyte, the film, which is assumed to have the (-BrHC-C₆H₄-CHBr-)_n composition, can be reduced to form poly(para-phenylenevilylene) (PPV). This film exhibits redox activity in the cathodic range in solutions of Bu₄NBF₄ in DMFA and in both cathodic and anodic ranges in solutions of Bu₄NBF₄ in AN. It is observed for the first time that, if the cathodic limit of the potential cycling range is extended to ?2.5 V, the cathodic doping of PPV at potentials below ?2 V disappears and a new reversible redox process takes place at more negative potentials.