Design of YCF-1 mobile γ irradiator

YCF-1 Mobile irradiator is designed by BINE of China. It has been put into running in YanJi city of Jilin province. It is able to be moved to border and distance places and area lumped and spreading out of agricultural products to service. It can play a important role in demonstration and extending irradiation technology in food irradiation, disinfestation, sterilization and quarantine, etc. This paper describes the features and design considerations of mobile irradiator.This irradiator adopted Cesium-137 source. The design capacity of loading source is 9.25PBq (250kCi), A half-time of Cs- 137 is 30.2 years long, exchanging source is not needed utilization rate of energy is higher, and the shielding is thinner, The Weight is lighter, The dose rate on the surface of it is 0.0025mSv/h in accordance with national standard. The internal size of irradiation room is 1800×1800×900mm (L×W×H), The sheilding of irradiation room is a steel shell filled with lead. The thickness of lead is 18cm. The irradiator is installed on a special flat truck. The size of the truck is 7000×3400×4200mm (L×W×H). The weight of irradiator is more than 80 150kw. The main components and parts of irradiator are: source, source racks and hoist, irradiation chamber, storage source chamber, the product's transport system, dose monitoring system, ventilation system and safety interlock system, etc.     

Development and validation of a gas chromatography/mass spectrometry procedure for confirmation of para-toluenesulfonamide in edible fish fillet tissue

Chloramine-T is a disinfectant being developed as a treatment for bacterial gill disease in cultured fish. As part of the drug approval process, a method is required for the confirmation of chloramine-T residues in edible fish tissue. The marker residue that will be used to determine the depletion of chloramine-T residues from the edible tissue of treated fish is para-toluenesulfonamide (p-TSA), a metabolite of chloramine-T. The development and validation of a procedure for the confirmation of p-TSA is described. Homogenized fish tissue is dried by mixing with anhydrous sodium sulfate, and the mixture is extracted with methylene chloride. The extract is passed through a silica gel solid-phase extraction column, from which p-TSA is subsequently eluted with acetonitrile. The acetonitrile extract is evaporated, and the oily residue is dissolved in hexane. The hexane solution is shaken with fresh acetonitrile. The acetonitrile solution is evaporated and the residue is redissolved in dilute potassium hydroxide solution. The aqueous solution is extracted with methylene chloride to further remove more of the fat co-extractive. The aqueous solution is reacted with pentafluorobenzyl bromide in presence of tetrabutylammonium hydrogensulfate. The resulting di-(pentafluorobenzyl) derivative of p-TSA is analyzed by gas chromatography/mass spectrometry. This method permits the confirmation of p-TSA in edible fish tissue at 20 ppb.     

植物甾醇女士访谈录

通过采访植物甾醇女士,了解植物甾醇家族的成员、基本性质、生理功能等。揭示了其降低胆固醇、减肥、美容功能的基本原理,了解了抗癌机理,介绍了植物甾醇在食物中的分布、人体吸收困难的原因及对策,为人类健康生活提出膳食建议。     

诺氟沙星的交流示波极谱滴定法研究

本文报道了示波极谱滴定法测定诺氟沙星的含量。用ＰＨ４．４的ＨＡｃ－ＮａＡｃ缓冲溶液溶解药样，并与过量的四苯硼钠作用生成沉淀。过滤后，用硫酸亚铊回滴过量的Ｎａ－ＴＰＢ，由示波极谱图［ｄＥ／ｄｔ＝ｆ（Ｅ）］上ＴＰＢ切口的消失指示滴定络点，进而在该溶液中进行空白实验。     

由乳酸合成乳酸乙酯反应动力学的研究

研究了用强酸性阳离子交换树脂催化乳酸和乙醇酯化反应的动力学,通过对实验结果的分析,发现该反应正反应为二级反应,逆反应为零级反应,并由此推导出了反应动力学方程。同时还发现在温度较低时这一反应存在诱导期现象,并对这一现象进行了分析。     

惰气熔融-红外法测定镍钛合金中的氧含量

针对镍钛(NiTi)合金中的氧含量进行研究,建立了惰气熔融-红外吸收法测定NiTi合金中氧含量的新方法。研究了不同助熔剂、称样量、分析功率、分析时间及比较器水平对测定结果的影响。确定采用镍做助熔剂,分析功率为4.0至5.5kW,分析时间为30s,比较水平为2的条件对NiTi合金中氧含量进行测定。惰气熔融-红外法测定NiTi合金氧含量相对标准偏差为1.8%,对标准样品的测定结果与标准值基本相符。方法操作简单,分析速度快,能满足生产要求,对工艺研究和产品质量控制具有积极意义。     

Dissociative adsorption of carbon monoxide on Mo(110): first-principles theory

The adsorption and dissociation of carbon monoxide on Mo (110) surface is studied with density functional theory. The results at different sites (atop, short bridge, long bridge, and hollow) are presented. The hollow site is found to be the most stable adsorption site for CO. The CO molecule is found to adsorb in end-on configurations (alpha states) at high coverage and inclined configurations (beta states) at low coverage. The dissociation activation energy from beta states is found to be approximately 1 eV lower than from alpha state. The adsorption of dissociation products, C and O, on Mo(110) has also been studied. The most stable adsorption site for C and O is long bridge and hollow site, respectively. The adsorption of C and O at low coverage is, in general, stronger than at high coverage, which is partly responsible for the high reactivity of CO dissociation at low coverage, since the binding energy of CO is not very sensitive to the coverage.     

氟吗啉合成工艺热危险性及动力学研究

氟吗啉是一种新型杀菌剂, 合成工艺热危险性和动力学研究将解决工程问题, 并保障安全生产. 采用差示扫描量热-热重分析仪(DSC-TG)测试主要原料、中间体和产品的热稳定性, 采用反应量热仪(RC1)研究反应热行为, 同时开展反应动力学研究. 研究结果显示, 主要中间体(3,4-二甲氧基苯基)(4-氟苯基)甲酮吸热分解温度为559.3 K, 乙酰吗啉吸热分解温度为478.2 K, 氟吗啉吸热分解温度为638.6 K. 氟吗啉合成反应摩尔放热量为15.44 kJ/mol, 绝热温升ΔT_ad为9.1 K, 本研究合成工艺的热危险性较小. 氟吗啉合成反应动力学方程为：r_A=kc_A^a=8.34×10^-3C_A^0.57, 对主要中间体(3,4-二甲氧基苯基)(4-氟苯基)甲酮的反应级数为0.57 级.     

原子吸收光谱法间接测定萤石中的全硫

基于SO42-和BaCrO4溶液反应生成BaSO4沉淀, 置换出定量的CrO42-, 通过原子吸收法测定Cr, 建立了间接测定萤石中硫的原子吸收光谱法. 方法的工作曲线范围0.05～20 μg/mL SO42-, 检出限为0.017 μg/mL S, 适用于硫质量分数在0.01%～3%范围内萤石样品的测定.     

Flow injection analysis of sulphite by gas-phase molecular absorption UV/VIS spectrophotometry

A flow injection gas-phase molecular absorption spectrophotometric method is described for the determination of sulphite in aqueous solution. The sulphite solution, 200 microl, is introduced into a stream of distilled water. The carrier stream containing a sulphite zone is reacted, in the first mixing coil, with a stream of sulphuric acid (1 M). The evolved sulphur dioxide is purged to the segments of nitrogen flow through the second mixing coil. The gaseous phase is separated from the liquid stream by the use of a purpose built gas-liquid separator and then is swept into a purpose built flow-through cell. The absorbance of the gaseous phase is measured at 200 nm using a UV/VIS spectrophotometer. Up to 440 microg of sulphite is determined. The limit of detection is 0.8 microg and the R.D.S. for the determination of 70 and 220 microg of sulphite are 1.02 and 0.76%, respectively. Up to 40 samples h(-1) can be analyzed. The effect of several anions and cations on the determination of sulphite was studied and the results showed that the method is relatively free from interferences. The proposed method was applied to the determination of sulphite in a synthetic sample, water sample and lemon juice.     

N，N－二甲基甘氨酸乙酯分解反应机理的理论研究

利用量子化学计算方法MP2／6－31＋G^*研究了N，N－二甲基甘氨酸乙酯在气 相中热分解反应机理，并计算了反应的协同性，得出此反应是一个多步反应过程。 主要有两个阶段：第一个阶级是N，N－二甲基甘氨酸乙酯热分解产生N，－N二甲基 甘氨酸中间体和乙烯，第二个阶段是N，N－二甲基甘氨酸进一步分解生成三甲氨和 二氧化碳。第一个反应阶段为速率控制步骤。研究表明，该反应机理是一个非协同 的质子转移过程。计算结果与实验值吻合。     

便携式亚铁离子光化学传感器的研究

研究了一种以吸附树脂为基质的便携式光化学传感器。以４,７－二苯基－１,１０－二氮杂菲为敏感试剂,用于水中亚铁离子含量的检测。此传感器结构简单,可用１２Ｖ电池提供能量,响应时间短（〈１０ｍｉｎ）,质量浓度的检测范围为０．０５～３．００ｍｇ／Ｌ,检出限为０．０１ｍｇ／Ｌ,选择性好,适用于野外水质监测。     

The Iodimetric Value Measurement of Expanded Graphite

The shape of expanded graphite is a netted and hollow structure.It is very easy to adsorb molecules and adsorption power is better. The research has proved:the expanded graphite had its ability to adsorb weigh oil etc. The capacity of adsorptive materials has been expressed by the iodimetric adsorption value, but the iodimetric adsorptive value of expanded graphite has not been reported until so far.The paper measures the iodimetric adsorption value by the iodimetry, and the apparatus is used easily and simply. The operation is not more difficult and the accuracy is higher, and the reagent is usual.     

MoqRuyXz(X=S，Se，Te)纳米簇电催化还原氧的性能对比研究

直接甲醇燃料电池存有两个较为突出的技术问题,即:阳极催化剂活性低和甲醇渗透[1～4]。针对“甲醇渗透”(cross-over)问题有两种解决途径:一、使用低甲醇渗透率电解质膜(阻醇膜),二、使用抗甲醇氧还原电催化剂[4]。目前,多数改性或新型膜材料的阻醇率有一定提高,然而膜的电导率等指标不够理想[5～7]。抗甲醇氧还原催化材料的开发研究正逐渐受到重视[4]。因过渡金属纳米簇硫族化合物电催化剂的活性、抗甲醇性、稳定性高、成本低逐渐得到青睐,是有竞争力的Pt替代催化材料[7～15]。过渡金属纳米簇硫族化合物MqM′yXz的金属核M′多为Ru,掺杂…     

Spectrophotometric determination of nickel after separation by adsorption of its alpha-furildioxime complex on naphthalene

A new method is proposed for collecting traces of nickel from aqueous solution by precipitation as the alpha-furildioxime complex and adsorption of this onto microcrystalline naphthalene. The precipitate is collected, dried, and dissolved in chloroform, and the nickel is determined spectrophotometrically at 438 nm. The linear calibration range is 2-35 mug/10 ml. The molar absorptivity is 1.6 x 10(4) l. mole(-1). cm(-1). The main advantage is that the nickel is collected quantitatively after only a few seconds'shaking. The effect of varying pH, amount of reagent, naphthalene or buffer, shaking and standing time, and interferences have been investigated.     

电感耦合等离子体质谱法测定氧化钕中砷含量

建立草酸沉淀分离氧化钕,用校正方程消除残余钕离子产生的双电荷离子干扰,电感耦合等离子体质谱法测定砷含量的方法。选择了溶解样品条件,硝酸溶解样品即能满足检测要求;优化了仪器条件,功率1500W,雾化器流量0.86L/min;进行了内标元素的选择,确定Rh为最佳校正内标元素;确定用草酸分离基体并结合干扰校正方程消除钕的双电荷离子干扰;方法检出限为0.029 ng/mL,定量限为0.097 ng/mL。采用方法对实际样品进行测定,回收率(n=11)为94%～104%,相对标准偏差(RSD,n=11)为0.56%～5.82%。     

Mo2C膜表面粗糙化规律的计算机模拟

引入晶粒边界修正,改进了Mo2C膜表面粗糙化物理模型,将DT2模型推广到包括有温度的情况,对Mo2C膜表面形态进行计算机模拟并统计模拟图的高度分布,确定表面粗糙度随沉积时间和基底温度的变化规律。结果表明：引入晶粒边界修正大大促进了理论与实验结果的一致,Mo2C膜表面粗糙化属快速粗造化,粗造度随基底温度升高而非线性地增大。     

Thermomechanical degradation of filled polypropylene

The main problem in post-consumer plastics recycling is due to the thermomechanical stress acting on the melt during the reprocessing operations. The macromolecules break because of the temperature and of the mechanical stress. The extent of degradation is then correlated to the level of mechanical stress which, in turn, is proportional to the viscosity of the melt. The presence of fillers increases the viscosity of the polymers and then it is expected that the level of thermomechanical degradation of these systems is larger than that of the unfilled material. In this work the thermomechanical degradation kinetic of a polypropylene sample is investigated as a function of the calcium carbonate content. It is shown that the decrease of viscosity, that is the decrease of molecular weight, is directly related to the increase of viscosity due to the filler content. The worsening of the mechanical properties are consistent with the change of viscosity.     

Complexation ion-exchange chromatography of some metal ions on papers impregnated with Ti(IV)-based inorganic ion exchangers

The chromatographic behavior of 40 metal ions is studied on titanium (IV) arsenate, titanium (IV) phosphate-, titanium (IV) molybdate-, titanium(IV) tungstate-, and titanium(IV) selenite-impregnated papers in 0.1M oxalic, citric, and tartaric acid as mobile phases. Similar studies are carried out on Whatman No. 1 papers for comparison. The ion-exchange capacity of these papers is determined, and their selectivity for different cations is discussed. The mechanism of migration is explained in terms of ion-exchange, precipitation, and adsorption. The prediction of elution sequence from RF values is also checked. The average Ri is found to be almost linearly dependent on the charge of the metal ions. The effect of the pKa of complexing acids on average RF values of 3d series metal ions is explained. A number of binary and ternary separations are achieved.     

复合应力场剪切诱导成型PP-R自增强管材的结构与性能研究

利用自行设计制造的剪切拉伸双向复合应力场挤管装置生产出了双向自增强的无规共聚聚丙烯(PP-R C180)管材,研究分析了该双向应力场的剪切诱导效应对PP-R C180管材的结晶熔融、取向和拉伸强度的影响.结果表明,剪切拉伸双向复合应力场的引入所带来的剪切诱导效应促进了PP-R C180分子有序性的增加,使PP-R C180体系分子更容易形成分别沿管材周向和轴向方向的取向,因而保持甚至提高了耐热性与结晶速率,降低了结晶度,改变了PP-R C180的结晶结构与形态,诱导出了全新的β晶,进而改善了管材的强度性能.与常规管材相比,自增强管材在保持其熔点不降低的前提下,使结晶度从常规管材的44.96%降至40.03%,降低了4.93%;轴向强度从常规管材的23.35 MPa最高增强到25.49 MPa,提高了9.2%;周向强度从常规管材的22.71 MPa最高增强到26.54 MPa,提高了16.9%,且增强之后管材的周向强度已经高于了轴向强度,更优化地配置了聚合物材料的性能,更充分地满足了受内压管材使用的现实需求.