Flow-injection spectrophotometric determination of palladium in catalysts and dental alloys with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino)aniline

2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline rapidly forms a water-soluble complex with palladium in an acetate-buffered medium at pH 3.2.The molar absorptivity of the complex is 9.84×10⁴l mol^?1 at 612 nm. The calibration graph is linear over the range of 10–100 μg l^?1 palladium; the detection limit is 2 μg l^?1 and the relative standard deviation is 0.6% for 100 μg l^?1 palladium. The sample throughput is 50 h^?1. Divalent transition metals (Fe, Ni, Co) do not interfere at levels from 2 to 10 mg l^?1. Interference from copper is prevented by adding 10^?3 M EDTA solution to the carrier stream. Palladium in solutions of catalysts and dental alloys can be determined selectively, sensitively and rapidly.     

Poly(Vinyl Chloride) Containing Dibenzo-18-crown-6 as an Ion-Selective Membrane for Hyamine 1622

Abstract

A poly(vinyl chloride) membrane ion-selective electrode for the Hyamine 1622 cation is proposed. The active substance of the electrode was the neutral carrier dibenzo-18-crown-6 and di-iso-octylphthalate was used as plasticizer. The electrode had a Nernstian behaviour between 6.0 × 10^?6 and 1.6 × 10^?3 mol/dm³, a pH working range of 2 – 12 and high selectivity towards inorganic cations. Among the organic cations tested, only those having surfactant properties did interface. The electrode was suitable for determining the critical micelle concentration and as end-point detector in the potentiometric titration of the cationic surfactants.     

Determination of caprolactam by adsorptive voltammetry after separation by thin-layer chromatography

Caprolactam (2-oxohexamethyleneimine) can be determined in wastewaters and natural waters by adsorptive stripping voltammetry after separation of the product of the reaction between caprolactam and p-(N,N-dimethylamino)benzene-p′-azobenzoyl chloride. When a hanging mercury drop electrode is used with an accumulation time of 60 s in stirred solution, caprolactam can be determined from a lower limit of 0.2 μg ml^?1. With a 360-s accumulation time, linear calibration plots are obtained for 8 × 10^?10?8 × 10^?9 mol l^?1 caprolactam. The effect of interfering sample components is eliminated by the TLC separation.     

Temperature dependence of the reaction rate constants for O(3P) atoms with C2H4, C3H6 and NO(M = N2O), determined by a modulation technique

Rate constants for the reaction of O(³P) atoms with C₃H₄, C₃H₆ and NO(M = N₂O) have been measured over the temperature range 300–392°K using a modulation-phase shift technique. The Arrhenius expressions obtained are:C₂H₄, k₂ = 3.37 × 10⁹ exp[?(1270 ± 200)/RT]liter mole^?1 sec^?1,C₃H₆, k₂ = 2.08 × 10⁹ exp[?(0 ± 300)/RT]liter mole^?1 sec^?1,NO(M = N₂O), k₁ = 9.6 × 10⁹ exp[(900 ± 200/RT]liter² mole^?2 sec^?1.These temperature dependencies of k₂ are in good agreement with recent flash photolysis-resonance flourescence measurements, although lower than previous literature values.     

Determination of chlorite at very low levels by using differential pulse polarography

A method is reported for the determination of μgl^?1 levels of chlorite by using differential pulse polarography. The electrochemical reduction of chlorite was studied between pH 3.7 and 14 and in an ionic strength range of 0.05–3.0 M. The optimum conditions are pH 4.1–4.4 and an ionic strength of 0.45 M. The current under these conditions is diffusion-controlled and is a linear function of chlorite concentration ranging from 2.77×10^?7 to 2.80×10^?4 M (19 μgl^?1 to 19 mg l^?1). The imprecision is better than ±1.0% and ±3.4% at concentrations of 2.87×10^?5 M and 1.74×10^?6M, respectively, with a detection limit of 1×10^?7 M (7μgl^?1). An interference study and the application of this method for determining chlorite in drinking water are reported.     

A study of the reaction NO3 + NO2 + M → N2O5 + M(M = N2, O2)

The gas-phase reaction of the NO₃ radical with NO₂ was investigated, using a flash photolysis-visible absorption technique, over the total pressure range 25–400 Torr of nitrogen or oxygen diluent at 298 ± 2 K. The absolute rate constants determined (in units of 10^?13 cm³ molecule^?1 s^?1) at 25, 100, and 400 Torr total pressure were, respectively, (4.0 ± 0.5), (7.0 ± 0.7), and (10 ± 2) for M = N₂ and (4.5 ± 0.5), (8.0 ± 0.4), and (8.8 ± 2.0) for M = O₂. These data show that the third-body efficiencies of N₂ and O₂ are identical, within the error limits, and that previous evaluations for M = N₂ are applicable to the atmosphere. In addition, upper limits were determined for the rate constants of the reactions of the NO₃ radical with methanol, ethanol, and propan-2-ol of ?6 × 10^?16, ?9 × 10^?16, and ?2.3 × 10^?15 cm³ molecule^?1 s^?1, respectively, at 298 ± 2 K.     

Flow-injection determination of paraoxon by inhibition of immobilized acetylcholinesterase

Two flow-injection methods (continuous-flow and stopped-flow) are proposed for the determination of paraoxon, applying the dual-injection technique and spectrophotometric detection. They are based on the inhibition of the acetylcholinesterase-catalysed hydrolysis of α-naphthyl acetate and subsequent reaction of the α-naphthol produced with p-nitrobenzenediazonium fluoroborate. For the continuous-flow system the calibration graph was linear from 5 × 10^?7 to 1.5 × 10^?5 M, the relative standard deviation (r.s.d.) (n=6) for an 8 × 10^?6 M standard was 1.4%, the limit of detection (3σ) was 4 × 10^?7 M and the sample throughput was ca. 60 h^?1. For the stopped-flow system the linear range was from 1 × 10^?8 to 4 × 10^?7 M, the r.s.d. for a 2.5 × 10^?7 M standard was 0.9%, the limit of detection was 8 × 10^?9 M and the sample throughput was 30 h^?1.     

Optical-fiber sensor based on the second-harmonic emission of a near-infrared semiconductor laser as light source

Second-harmonic emission from a near-infrared semiconductor laser is used as the light source for fluorimetry. The efficiency of the second-harmonic generation is 2.5×10^?6; at 390 nm, the power achieved is 50 nW when a 20-mW semiconductor laser (780 nm) is used. For fluorimetric determination of 7-diethylamino-4-methylcoumarin, the calibration plot is linear in the range 0–8×10^?7 M, the detection limit being 5×10^-∞ M (S/N=3 ). The generated ultraviolet emission is used with benzo (ghi)perylene in an optical-fiber sensor for oxygen (0–15%).     

Substoichiometric isotope-dilution analysis for strontium by liquid-liquid extraction with a macrocyclic crown ether or cryptand

Strontium(II) is substoichiometrically extracted into 1,2-dichloroethane with 1.0 × 10^?4 M cryptand-2.2.2 or 18-crown-6 in the presence of 1.0 ×10.2 M picrate at pH 8–10 or 7–9, respectively. A constant substoichiometric amount of strontium(II) is extracted (relative standard deviation, 0.5%). The method combined with isotope dilution is applied to determine strontium(II) in a seaweed sample (Laminaria religiosa Miyabe); the values obtained were 546 ± 9 μg g^?1 with cryptand-2.2.2 and 546 ± 7 μg g^?1 with 18-crown-6.     

Determination of coumarins by voltammetric techniques in micellar and emulsified media

An electroanalytical study of the oxidation processes of umbelliferone and hymecromone at a glassy carbon electrode in micellar solution and emulsified medium by different voltammetric techniques is described. The non-ionic surfactant Triton X-405 in acetate-buffered medium at pH 4.8 was found to be the most suitable. Different ranges of linearity were obtained in the micellar solutions, depending on the technique used; the limits of determination for differential pulse voltammetry (DPV) at a stationary electrode were 2.9×10^?6 mol l^?1 and 3.3×10^?6 mol l^?1 for umbelliferone and hymecromone, respectively. In the emulsified medium formed with a mixture of toluene and ethyl acetate (3:2), the oxidation processes yielded similar results. With DPV, linear calibration plots were obtained in the ranges 1.0×10^?5–9.0×10^?7 mol l^?1 umbelliferone and 1.0×10^?5–2.0×10^?6 mol l^?1 hymecromone. The media used are predominantly aqueous so that special reference electrodes and solvent purification are not needed.     

Direct electrochemistry and electrochemical biosensing of glucose oxidase based on CdSe@CdS quantum dots and MWNT-modified electrode

The direct electron transfer of glucose oxidase (GOx) was achieved based on the immobilization of CdSe@CdS quantum dots on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan (Chit) film. The immobilized GOx displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ’) of ?0.459 V (versus Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) of GOx confined in MWNTs-Chit/CdSe@CdS membrane were evaluated as 1.56 s^?1 according to Laviron's equation. The surface concentration (Γ*) of the electroactive GOx in the MWNTs-Chit film was estimated to be (6.52?±?0.01)?×?10^?11?mol?cm^?2. Meanwhile, the catalytic ability of GOx toward the oxidation of glucose was studied. Its apparent Michaelis–Menten constant for glucose was 0.46?±?0.01 mM, showing a good affinity. The linear range for glucose determination was from 1.6?×?10^?4 to 5.6?×?10^?3?M with a relatively high sensitivity of 31.13?±?0.02 μA?mM^?1?cm^?2 and a detection limit of 2.5?×?10^?5?M (S/N=3).     

Kinetic determination of 1,3-propanediamine-N,N′-diacetic-N,N′-di-3-propionic acid and in a mixture with ethylenediaminetetra-acetic acid

A kinetic method is proposed for the determination of propanediamine-N,N′-diacetic-N,N′-di-3-propionic acid, based on its inhibitory effect on the acetonitrile-catalysed oxidation of Pyrocatechol Violet by hydrogen peroxide. The concentrations of 1,3-propanediamine-N,N′-diacetic-N,N′-di-3-propionic acid determined ranged from 5.0 × 10^?7 to 4.0 × 10^?6 M with a relative standard deviation of up to 3.3%. The same indicator reaction can be applied to the determination of 1,3-propanediamine-N,N′-diacetic-N,N′-di-3-propionic acid and ethylenediaminetetra-acetic acid in mixtures. Mixtures of these acids in molar ratios from 1 ∶ 4.5 to 10 ∶ 1 have been analysed. Concentrations of 1,3-propanediamine-N,N′-diacetic-N,N′-di-3-propionic acid from 2.0 × 10^?7 to 1.0 × 10^?6 M and ethylenediaminetetra-acetic acid from 1.0 × 10^?7 to 9.0 × 10^?7 M were determined with relative standard deviations of up to 4.3 and 5.7%, respectively. The effect of foreign ions on the accuracy of these determinations was also investigated.     

A violet emission from optically excited mercury vapour. Kinetics of the formation and decay of excited dimers and trimers

A new electronic systems has been observed from excited Hg vapour, which is assigned to collisionally induced emission from the Hg₂ O^±_g first excited states of the dimer: Hg₂O^±_g + M → 2Hg(6 ¹S₀) + M + hv(γ_max 3950 A). For M = N₂, the rate coefficient is 5.3(±0.7) × 10^?19 cm³ molecule^?1 at 298 K. From time resolved measurements of the luminescence in the afterglow following pulsed excitation, the decay rate of the green emission, in an excess of N₂, is shown to be a linear function of [Hg][N₂]. It is concluded that the reaction which controls the decay of the excitation is formation of an excited trimer in a termolecular reaction; the trimer is the carrier of the green emission: Hg₂ O^±_g + Hg(6 ¹S₀ + Hg(6¹S₀ + N₂ → Hg₃³Π_u + N₂. The rate coefficient is 1.10(±0.07) × 10^?30 cm⁶ molecule^?2 s^?1 at 298 K.     

Cyanide ion selective solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylene diamine ionophore

A cyanide ion selective poly(aniline) solid contact electrode based on nickel complex of N,N′-bis-(4-phenylazosalicylidene)-o-phenylenediamine ionophore was successfully developed. The electrode exhibits a good linear response of 58.7 mV/decade (at 20 ± 0.2°C, r ² = 0.998) with in the concentration range of 1 × 10^?1.0-1 × 10^?6.0 M cyanide. The composition of this electrode was: ionophore 0.300, polyvinylchloride 0.300, 2-nitrophenyloctyl ether 0.670 (mass). This 2-nitrophenyloctyl ether plasticizer provides the best response characteristics. The electrode shows good selectivity for cyanide ion in comparison with any other anions and is suitable for use with aqueous solutions of pH 4.6–6.3. The standard deviations of the measured emf difference were ±1.92 and ±1.87 mV for cyanide sample solutions of 1.0 × 10^?2 M and 1.0 × 10^?3 M, respectively. The stabilization time was less than 183 s and response time was less than 38 s.     

Spectrofluorimetric determination of niobium with morin enhanced by cetyltrimethylammonium bromide micelles

The effect of surfactants on the fluorescence of the niobium—morin system is described. Cationic surfactants strongly enhanced the intensity (e.g., cetyltrimethylammonium bromide (CTAB) gives an 80-fold increase), while anionic and non-ionic surfactants are without effect. The formation of 1:1 and 1:3 (Nb:morin) complexes is demonstrated spectrophotometrically. The conditional stability constants for these complexes in CTAB micelles are β₁ = (1.14 ± 0.01) × 10⁴ l mol^?1 amd β₃ = (5.66 ± 0.02 × 10¹⁰ l³ mol^?3. The micellar-enhanced fluorimetric method has a 1 μg l^?1 detection limit, and is highly selective. The r.s.d. for the determination of 50 μg l^?1 Nb is 3.5%.     

NADH Electrocatalytic Oxidation on Gold Nanoparticle‐Modified PVC/TTF‐TCNQ Composite Electrode. Application as Amperometric Sensor

We herein report on the electrocatalytic activity towards the oxidation of NADH of a PVC/TTF‐TCNQ composite electrode modified with gold nanoparticles. This electrocatalytic property allows proposing this system as a new alternative for amperometric determination of NADH, without need to add another mediator. The sensor shows a linear response to NADH over a concentration range from 5.0×10^?6 M up to 5.0×10^?4 M, with a sensitivity of 11.22±0.5 mA M^?1 and a detection limit (S/N=3) of 4.0×10^?6 M for measurements in batch and similar data in FIA.     

Flow Injection and Batch Spectrophotometric Determination of Ibuprofen Based on its Competitive Complexation Reaction with Phenolphthalein‐β‐Cyclodextrin Inclusion Complex

Abstract

Rapid, simple, and accurate spectrophotometric method is presented for the determination of ibuprofen by batch and flow injection analysis methods. The method is based on ibuprofen competitive complexation reaction with phenolphthalein‐β‐cyclodextrin (PHP‐β‐CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of ibuprofen was measured. Ibuprofen can be determined in the range 8.0×10^?6 ?3.2×10^?4 and 2.0×10^?5?5.0×10^?3 mol l^?1 by batch and flow methods, respectively. The limit of detection and limit of quantification were 6.19×10^?6 and 2.06×10^?5 mol l^?1 for batch and 1.77×10^?5 and 5.92×10^?5 mol l^?1 for flow method, respectively. The sampling rate in flow injection analysis method was 120±5 samples h^?1. The method was applied to the determination of pharmaceutical formulations.     

Electrochemical determination of norepinephrine on the membrane of silver nanoparticles doped poly-glycine eliminating the interference of ascorbic acid

The silver nanoparticles doped poly-glycine composite membrane was prepared by cyclic voltammetry on the surface of the glassy carbon electrode (GCE). The morphology and electrochemical properties were characterized by scanning electron microscopy and cyclic voltammetry, respectively, and in detail, the electrochemical behaviors of the norepinephrine (NE) on this membrane were studied. The results showed that the membrane had good catalytic properties for the oxidative–reductive reaction of NE. NE had a couple of sensitive oxidative-reductive current peaks. The reductive peak currents were linearly with its concentration in the range of 1.90?×?10^?7 to 7.00?×?10^?6 and 7.00?×?10^?6 to 1.00?×?10^?4?mol l^?1, and the linear regressive equations were i _pc (A)?=?3.73?×?10^?6?+?0.70C (mol l^?1), i _pc (A)?=?9.83?×?10^?5?+?0.12C (mol l^?1), respectively, with the relate coefficient (r) of 0.9926 and 0.9944. The detection limit was 1.2?×?10^?7?mol l^?1 (S/N?=?3), which could be used to determine the content of NE and at the same time, eliminate the interference of the ascorbic acid (AA). The proposed method had high sensitivity, good selectivity and stability.     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Determination of total phthalate esters in wastewaters by differential pulse polarography

A reliable procedure for the determination of total phthalate esters as phthalic acid in environmental samples is based on differential pulse polarography (d.p.p.). The phthalate esters are extracted from the sample water with hexane; concentrated sulphuric acid/hexane partitioning provides effective removal of organic interferences. The individual phthalate esters are hydrolyzed by refluxing with 10 M potassium hydroxide to phthalic acid, which is extracted with ethyl acetate followed by evaporation of the extract. This procedure gives recoveries of 83–90%. The residue is dissolved in 0.1 M acetic acid/0.1 M potassium chloride for d.p.p. The otpimal conditions for polarography are discussed. The calibration graphs are linear over the range 2 × 10^?6–1 × 10^?4 M and the detection limit for phthalic acid is 5 × 10^?7 M. The method was successfully applied to determine total phthalate esters over the range 0.3–30 μg l^?1 in crude and treated wastewaters.