Determination of lead by hydride generation atomic absorption spectrometry : Part 1. A new medium for generating hydride

A new medium, used to generate lead hydride, was optimized as 0.3% (w/v) oxalic acid-2% (w/v) ammonium cerium (III) nitrate-8% (w/v) potassium tetrahydroborate-1% (w/v) sodium hydroxide solution; 950°C is used for atomization. The characteristic concentration (0.0044 absorbance) obtained under these conditions was 0.04 ng ml^?1. The application of this medium to soil and ferromagano-brass samples is illustrated.     

Determination of trace phosphorus in high purity tantalum materials by inductively coupled plasma mass spectrometry subsequent to matrix separation with on-line anion exchange/coprecipitation

An on-line matrix separation/inductively coupled plasma mass spectrometry (ICP-MS) method is proposed for the determination of trace amounts of phosphorus in high purity tantalum metal, tantalum (V) oxide, and tantalum pentaethoxide. In the present method, the matrix tantalum in the sample solution was adsorbed on the anion exchange resin, and phosphorus (phosphate ion) was eluted with the carrier solution of HF and HNO3 mixture. Then, the effluent solution was subsequently mixed with bismuth solution and aqueous ammonia solution to coprecipitate phosphate together with bismuth hydroxide. The precipitate formed was collected on the in-line membrane filter to wash out nitric acid with pure water, and then dissolved with hydrochloric acid. The obtained phosphorus sample solution was introduced directly into the nebulizer of ICP-MS for the determination of phosphorus. Phosphorus was determined at the molecular ion signal of 31P16O+ (m/z 47). The detection limit (3sigma) of phosphorus in the present method was 1.3 ng mL(-1) as the sample solution basis, and the relative standard deviation for 30 ng mL(-1) of phosphorus in the standard solution was 4.3% in the replicate measurements (n=11). The present method was applied to the analysis of high purity tantalum materials. The concentrations of phosphorus in tantalum samples were in fairly good agreement with those obtained by glow discharge mass spectrometry (GDMS).     

Reverse phase high-performance liquid chromatographic determination of primary and secondary aliphatic alcohols as phthalate monoesters by UV detection

Summary Determination of primary and secondary aliphatic alcohols in aqueous and nonaqueous solutions by high-performance liquid chromatography (HPLC) is described. The alcohol is derivatized with phthalic anhydride to yield the corresponding monophthalate. Separation of the derivative is achieved on an ODS-10 reverse phase (RP) column by elution with an appropriate isocratic mobile phase of acetonitrile and aqueous phosphoric acid (0.1%). Detection is accomplished by UV absorption at 230 nm or 280 nm giving linear calibration plots, for alcohols in aqueous solution from 0.05% to 0.50% (w/v) and in pyridine solution from 0.0025% to 0.0250% (w/v).     

Total and inorganic mercury determination in fish tissue by flow injection cold vapour atomic fluorescence spectrometry

A simple and reliable method for Hg determination in fish samples has been developed. Lyophilised fish tissue samples were extracted in a 25% (w/v) tetramethylammonium hydroxide (TMAH) solution; the extracts were then analysed by FI-CVAFS. This method can be used to determine total and inorganic Hg, using the same FI manifold. For total Hg determination, a 0.1% (w/v) KMnO₄ solution was added to the FI manifold at the sample zone, followed by the addition of a 0.5% (w/v) SnCl₂ solution, whereas inorganic Hg was determined by adding a 0.1% (w/v) L-cysteine solution followed by a 1.0% (w/v) SnCl₂ solution to the FI system. The organic fraction was determined as the difference between total and inorganic Hg. Sample preparation, reagent consumption and parameters that can influence the FI-CVAFS performance were also evaluated. The limit of detection for this method is 3.7 ng g^?1 for total Hg and 4.3 ng g^?1 for inorganic Hg. The relative standard deviation for a 1.0 µg L^?1 CH₃Hg standard solution (n = 20) was 1.1%, and 1.3% for a 1.0 µg L^–1 Hg²⁺ standard solution (n = 20). Accuracy was assessed by the analysis of Certified Reference Material (dogfish: DORM-2, NRCC). Recoveries of 99.1% for total Hg and 93.9% inorganic Hg were obtained. Mercury losses were not observed when sample solutions were re-analysed after a seven day period of storage at 4°C.     

Determination of arsenic in biological fluids by electrothermal atomic absorption spectrometry

A procedure for the determination of the total content of arsenic in urine, serum and blood by electrothermal atomic absorption spectrometry (ETAAS) is described. Zeeman correction is used to compensate the high background signals. The samples are diluted (1 + 1 for urine and 1 + 3 for both serum and blood samples) in a medium containing 0.1% w/v Triton X-100 before being introduced directly into the furnace. A solution containing 15% w/v hydrogen peroxide, 0.65% w/v nitric acid and 0.5% w/v nickel is also introduced into the atomizer by means of a separate injection. Calibration is carried out against aqueous standards for blood and serum samples and using the standard additions method for urine samples. The detection limit is 20 pg (2 ng ml-1). The reliability of the procedure is checked by analyzing three certified reference materials and by recovery studies.     

Solvent extraction-spectrophotometric determination of phosphate with molybdate and malachite green in river water and sea-water

Molybdophosphate, formed between orthophosphate and molybdate in sulphuric acid solution, is extracted into a mixture of toluene and 4-methylpentan-2-one (1:3 v v ) with Malachite Green as counter-ion. A single extraction with equal phase volumes gives an apparent molar absorptivity for phosphate of 2.3 x 10(5) l.mole(-1).cm(-1) at 630 nm; the absorbance of the reagent blank is 0.03. With an organic to aqueous phase-volume ratio of 1:10, the molar absorptivity is 2.5 x 10(5) l.mole(-1).cm(-1) and the absorbance of the reagent blank 0.08. By the proposed method, ng ml levels of phosphorus can be determined, and the detection limit is about 0.1 ng ml . The standard deviation and relative standard deviation for the determination of phosphorus in tap water (4.3 ng ml ) are 0.05 ng ml and 1.1%, respectively. The method can also be applied to the determination of phosphorus in river water and sea-water.     

High-performance liquid chromatographic analysis of the anticancer drug oxantrazole in rat whole blood and tissues.

A reversed-phase high-performance liquid chromatographic (HPLC) assay was developed for the antitumor anthrapyrazole analogue, oxantrazole (OX), in rat whole blood and tissues. Blood samples were mixed with equal volumes of a 25% (w/v) aqueous solution of L-ascorbic acid, whereas tissue samples were homogenized with 1.5-3 volumes of an L-ascorbic acid-methanol-water (1:10:1, w/v/v) mixture to prevent oxidative degradation of OX. Samples were then treated with 60% (v/v) perchloric acid (25-30 microliters/ml of stabilized sample) to precipitate proteins, and centrifuged, with the resultant supernatants analyzed on HPLC utilizing a C8 column. The mobile phase for blood and urine samples consisted of 8% (v/v) glacial acetic acid, 13% (v/v) acetonitrile, 79% (v/v) water, 0.16% (w/v) sodium acetate, and 0.05% (w/v) L-ascorbic acid (final pH 2.7), and was pumped at 1.8 ml/min. Tissue samples were eluted at 2 ml/min with a mobile phase consisting of 8% (v/v) glacial acetic acid, 12% (v/v) acetonitrile, 80% (v/v) water, 0.16% (w/v) sodium acetate, and 0.0;5% (w/v) L-ascorbic acid. OX and internal standard were detected at 514 nm and had retention times of 2.3 and 3.1 min, respectively. The limit of quantitation of OX was 25-50 ng/g. Recovery of OX from biological samples ranged from 50 +/- 0.9% in spleen to 102.8 +/- 1.8% in RG-2 glioma. The analytical method was applied to a pharmacokinetic study in rats.     

Derivative activation analysis of phosphorus at ppb levels in water samples

A neutron activation analysis procedure has been developed for the indirect determination of phosphorus as orthophosphate at ppb levels, via the formation of antimonyl phosphomolybdic acid. The complex is adsorbed on Sephadex G-25 resin and the antimony is estimated through NAA, allowing the determination of phosphorus. The procedure provides an easy method to adopt for the routine determination of phosphorus at 10 ng ml^–1 levels with good precision, in water samples.     

Neutral persulfate digestion at sub-boiling temperature in an oven for total dissolved phosphorus determination in natural waters

A simplified, easily performed persulfate digestion method has been developed to process a large number of water samples for routine determination of total dissolved phosphorus. A neutral potassium persulfate solution (5%, w/v, pH ∼6.5) is added to the samples (at 10 mg potassium persulfate per mL of sample), which are then digested at 90 °C in an oven for 16 h. This method does not require pH adjustment after digestion because neither an acid nor a base is added to the samples prior to digestion. The full color of phosphoantimonylmolybdenum blue from the digested samples develops within 8 min. Compared with the autoclave method, digestion at sub-boiling temperatures in an oven is safer, and a large number of samples can be heated overnight requiring no constant monitoring. The apparent molar absorptivity (?) of nine organic phosphorus compounds and two condensed inorganic phosphates ranged from 1.17 × 10⁴ to 1.82 × 10⁴ L mol⁻¹ cm⁻¹ in both distilled water and artificial seawater matrixes. The average recovery of these phosphorus compounds was 94 ± 11% for the DIW matrix and 90 ± 12% for the ASW matrix. No significant difference in molar absorptivity was observed between the undigested and digested phosphate, especially in the seawater matrix. It is, therefore, suggested that a phosphate solution be directly employed without digestion as the calibration standard for routine determination of total dissolved phosphorus. This method was used to study the spatial distribution of total dissolved phosphorus in the surface waters of Florida Bay.     

Selective transport of zirconium (IV) and niobium (V) from hydrochloric media through a bulk liquid membrane

The selective transport of zirconium/niobium from hydrochloric medium has been investigated through a bulk liquid membrane (BLM) using tri-n-butyl-phosphate (TBP), tri-n-octylamine and dibenzo-18-crown-6 (DBC-6) as the extractants (carriers). The Optimization studies have been carried out by scrutinizing the effect of variables such as the hydrochloric acid concentration in the feed solution, membrane type and hydrochloric acid concentration in the strip solution using the Taguchi approach. The Quantitative transport of zirconium/niobium has been observed by 30% (v/v) TBP in 1200 min from the feed composed of a 9.0 M hydrochloric acid solution of Zr(IV), Nb(V) and lanthanide cations, while the transport of other cations, which have been presented along with Zr/Nb are less than 3% during the same time. Moreover, the possible mechanism of Zr(IV)/Nb(V) ion transport through the BLM has also been discussed and the results show a consecutive, irreversible second-order reaction at the interfaces. Transfer kinetics studies show that niobium transfer process exhibits slightly faster kinetics than zirconium.     

Determination of phosphorus in hypereutectic aluminium-silicon alloys

A reproducible method is described for determination of small amounts of phosphorus (from 0.0005% to 0.02%) in hypereutectic aluminium-silicon complex alloys. The method permits the separate determination of phosphorus in acid-soluble and acid-insoluble fractions. Phosphomolybdate is extracted with n-butanol-chloroform solvent mixture and back-extracted with a btannous chloride reducing solution. The phosphorus content of a sample cut into small pieces decreases during storage; loss of phosphorus is negligible on acid dissolution under oxidizing conditions.     

HPTLC Detection and Identification of Heroin (Diacetylmorphine) in Forensic Samples. Part III

JPC – Journal of Planar Chromatography – Modern TLC - Anew spray reagent, a 1% (w/v) aqueous solution of ferric chloride and a 1% (w/v) acidified alcoholic solution of...     

Anisotropic solutions of methylol cellulose

Methylol cellulose solutions in dimethylsulfoxide exhibit a viscosity maximum at 18% w/v followed by a minimum at 20%, as is characteristic of lyotropic liquid crystals. The biphasic solutions exhibit areas of clear and cloudy appearance. The latter are birefringent. The highly anisotropic solutions are uniformly briefringent and in the 25–33% w/v concentration region they are brightly colored. The optical rotations of the mesomorphic phases are high, indicating a cholesteric structure. The sign of the optical rotation depends on the solution concentration and at high concentrations (25+% w/v) varies with the area of the solution viewed.     

Rapid determination of lead and cadmium in biological fluids by electrothermal atomic absorption spectrometry using Zeeman correction

Procedures for the electrothermal atomic absorption spectrometric determination of lead and cadmium in urine, serum and blood are developed. For serum and blood, the samples are diluted by incorporating 0.015% (w/v) Triton X-100 and 0.1% (w/v) ammonium dihydrogenphosphate to the solutions, which are then introduced directly into the furnace. A solution containing 15% (w/v) hydrogen peroxide and 0.65% (w/v) nitric acid is also introduced into the atomizer by means of a separate injection. Zeeman-based correction is recommended. Both conventional and fast-heating programs are discussed. Calibration is carried out using the standard additions method. The reliability of the procedures is checked by analyzing three certified reference materials and by recovery studies.     

Effect of sodium metasilicate on natural flotability of coal

The effect of the quantity of sodium metasilicate and conditioning time in one set of experiments, and the effect of the solution concentration of sodium metasilicate, added at the same dosage and conditioning time to coal slurry, on flotability of a typical Indian coal in another set of experiments are studied. Two sets of 3² full factorial experiments are carried out to assess the effects of the aforementioned variables. The generated data are analyzed quantitatively and explained qualitatively. At 0.1% (w/v) solution concentration of solution added (0.02 g/kg) and 8 min conditioning time, sodium metasilicate acted as activator for kaolinite, whereas at 1.0% (w/v) solution concentration (0.2 g/kg), it acted as dispersant. The best observed condition of depressant is obtained at an added concentration of 10.0% (w/v, 0.2 g/kg) and 8 min conditioning time. The desired effect of the sodium metasilicate can be achieved by controlling its quantity, solution concentration added, and conditioning time.     

Special features in the chemical structure of phosphorus isocyanates

The UV and IR absorption spectra and the NMR and NQR spectra of certain isocyanates of three- and four-coordinated phosphorus have been investigated. The reciprocal effect of the phosphorus atom and the NCO group is discussed on the basis of spectral analysis, quantum chemical calculations of the electron systems, and calculations of the normal vibrational forms. Comparison of the (PO) frequencies in the IR spectra of the phosphorus isocyanates with the Taft gives a linear relationship which testifies to the predominant inductive effect of the NCO group on the P(O)R₁R₂ grouping. A similar relationship is observed between the resonance frequency _res in the NMR spectra and for C1P(O)R₁R₂ compounds. The effect of the phosphorus atom on the electronic system in the NCO group is shown by the hypsochromic shift of the absorption band in the210-m region and an appreciable increase in its intensity, compared with alkyl isocyanates. This fact, which agrees with the NMR spectral data and the quantum chemical calculations, indicates the presence of conjugation in the P-N bond. We found the order of the P-N bond to be approximately 1.2. This partial double-bond nature of the P-N bond results from the interaction of the p electrons of nitrogen in the NCO group with the d orbitals of the phosphorus atom.We are grateful to our colleagues at the Kazan Physicotechnical Institute AS USSR A. I. Rivkind, S. G. Salikhov, and I. A. Safin for recording the spectra.     

Flow-injection technique for the determination of low levels of phosphorus in natural waters

An inexpensive flow-injection instrument for determining low concentrations of dissolved reactive phosphorus in natural waters is reported. The unique feature is the use of an inexpensive detector consisting of a flow cell and a simple photometer that incorporates a super-bright light-emitting diode as the source and a photodiode as the detector. The tin(II) chloride-molybdate method was optimized using a modified simplex optimization method. Silicate interference up to 5 mg Si l^?1 was removed by addition of 0.10% (w/v) tartaric acid. Using the tartaric acid-modified optimized reagents, a detection limit of 0.6 μg P l^?1 was achieved. The method was linear over the range 0–100 μg P l^?1 with an excellent precision (r.s.d. 2.9% at 2.0 and 0.5% at 50 μg P l^?1). An in-line pre-concentration anion-exchange column was used to obtain an even lower detection limit of 0.1 μg P l^?1 and applied to the analysis of real samples.     

超高效液相色谱-串联四极杆飞行时间质谱和超高效液相色谱-串联三重四极杆质谱用于血浆中苦杏仁苷及其代谢产物野黑樱苷的定性和定量分析

建立了大鼠灌胃麻杏石甘汤后血浆中苦杏仁苷、野黑樱苷的定性及定量方法。样品经液液萃取净化处理,定性采用超高效液相色谱-串联四极杆飞行时间质谱仪（UPLC-QTOF-MS/MS）,经Shim-pack XR-ODS Ⅲ色谱柱（75 mm×2.0 mm,1.6 μm）分离,定量采用超高效液相色谱-串联三重四极杆质谱仪（UPLC-Q-TRAP-MS）,经Agilent C₁₈色谱柱（50 mm×2.1 mm,1.7 μm）分离,电喷雾负离子化（ESI）及MRM模式测定,流动相均为乙腈-0.1%（v/v）甲酸水溶液。结果显示苦杏仁苷、野黑樱苷在相应浓度范围内线性关系良好（相关系数分别为0.9990、0.9970）,精密度（RSD）小于9.20%,回收率为82.33%~95.25%,检出限（LOD）约为0.50 ng/mL。本方法快速简便,为血浆样品中苦杏仁苷、野黑樱苷的定性和定量分析提供良好参考。     

Determination of some polycyclic aromatic hydrocarbons in filter tar of Turkish cigarettes

A simultaneous determination method for the analysis of benzo[a]pyrene (BaP) and dibenzo[a,h]anthracene (DahA) in the filter tar of Turkish cigarettes has been developed. The method involved (a) the extraction of BaP and DahA with n-hexane from ACN solution in which the cigarette filters were extracted, and then (b) purification of the n-hexane extracts by elution on an XAD-2 column using n-hexane/dichloromethane (9:1, v/v) mixture. Separation and quantitative determination of BaP and DahA in the extracts were carried out by HPLC and fluorescence detection on a C18 RP column. The calculated recoveries for BaP and DahA were found in the range of 90-100% for each extraction and clean-up steps. Analysis of various filter tar of Turkish cigarettes showed that an average of 74.28 ng/filter of BaP and 5.24 ng/filter of DahA were present in Turkish cigarettes.     

Desirability-based optimization and its sensitivity analysis for the perindopril and its impurities analysis in a microemulsion LC system

In the current paper the application of multiobjective optimization (MOOP) technique, via Derringer's desirability function, to a microemulsion liquid chromatographic (MELC) method is described. Chromatographic separation of perindopril tert-butylamine and its four impurities was selected as the case study. Central composite design (CCD) with fractional factorial design, ± 0.5 α star design and four replications in central point was applied for a response surface study, in order to examine in depth the effects of the most important factors. As factors that influence the system mostly (i) content of ethyl acetate and (ii) butyl acetate in composite internal phase, (iii) content of sodium dodecyl sulfate (surfactant) and (iv) n-butanol (co-surfactant), as well as (v) pH of the mobile phase were selected. Retention factor of (a) perindoprilat and (b) impurity Y 31 and (c) resolution factor for impurities Y 32 and 33 were chosen for simultaneous optimization. By adjustment of the importance coefficients and weights, according to defined objectives, the optimal mobile phase composition was predicted to be: 0.24% w/v butyl acetate, 0.3% w/v ethyl acetate, 2% w/v SDS, 7.75% w/v n-butanol and pH of the mobile phase 3.7. The sensitivity analysis of desirability function for these optimal conditions was conducted for the first time in LC separations, by applying a sensitivity procedure. The performed sensitivity analysis confirmed that the higher overall desirability does not necessarily mean a better solution. The accuracy of prediction might be affected if the optimal levels of input variables, achieved from several design points, end up with equal settings and different corresponding overall desirability. In our study this was not the issue, which confirmed the adequacy of predicted optimum.