Flow-injection spectrophotometric determination of palladium in catalysts and dental alloys with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino)aniline

2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline rapidly forms a water-soluble complex with palladium in an acetate-buffered medium at pH 3.2.The molar absorptivity of the complex is 9.84×10⁴l mol^?1 at 612 nm. The calibration graph is linear over the range of 10–100 μg l^?1 palladium; the detection limit is 2 μg l^?1 and the relative standard deviation is 0.6% for 100 μg l^?1 palladium. The sample throughput is 50 h^?1. Divalent transition metals (Fe, Ni, Co) do not interfere at levels from 2 to 10 mg l^?1. Interference from copper is prevented by adding 10^?3 M EDTA solution to the carrier stream. Palladium in solutions of catalysts and dental alloys can be determined selectively, sensitively and rapidly.     

Rapid and Sensitive Spectrophotometric Determination of Hafuium(IV) With 2-(5-Bromo-2-Pyridylazo)-5-Diethylaminophenol

Abstract

Hafnium(IV) reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.3–11.0 to yield a sparingly soluble red-coloured chelate that can be dissolved with Triton X-100. Effect of initial pH of metal ion and order of addition of reagents was studied in detail. The 1:3 complex adheres to Beer's law over the concentration range 0.02–1.12 μg/ml of Hf(IV), has a molar absorptivity 1.33x10⁵ 1 mol^?1cm^?1, Sandell sensitivity 1.3 ng cm^?2, formation constant (log K) 11.94 and the method had a relative standard deviation of ± 1.5%. Effect of 60 diverse ions on the determination of hafnium(IV) was studied. This fairly selective method is the most sensitive so far reported for the spectrophotometric determination of hafnium(IV).     

Tb3+ PVC-Membrane Electrode Based on 2-{2-(2-Anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazine Carbothioamide

Abstract

The polyvinyl chloride (PVC) membrane containing 2-{2-(2-anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazinecarbothioamide (AHC) as a suitable iophore exhibits a Nernstian response for Tb³⁺ ions over a wide concentration range (1.0 × 10^?6 to 1.0 × 10^?2 M) with a slope of 19.6 ± 0.3 mV per decade and a limit of detection of 6.8 × 10^?7 M in the pH range 3.5–8.5. The proposed sensor revealed very good selectivities (expect for the Pr³⁺ and Ho³⁺ ions) for a wide variety of other metal ions. The practical utility of the electrodes has been demonstrated by its use for the determination of Tb³⁺ in different solutions.     

Extraction-spectrophotometric determination of traces of palladium by reaction between zinc(II) dibenzyldithiocarbamate and palladium(II)/2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The simple and highly sensitive determination of palladium is based on the reaction between Pd(II)/5-Br-PADAP and Zn(II) DBDTC complexes in 1,2-dichloroethane or toluene at pH 9.7. At 530 nm, the molar absorptivity is about 0.8 × 10⁵ l mol ^?1 cm ^?1. Beer's law is obeyed in the concentration range 0.1–1.2 μg ml ^?1 Pd. Relative standard deviations are 2–5%. Metal ions reacting with either of the organic reagents interfere.     

Original Potentiometric Ytterbium(III) PVC-Membrane Sensor Based on N1,N2-Bis-[1-(2-hydroxy-1,2-diphenyl)ethylidene]ethanedihydrazide

Abstract

In this work, we describe the construction, performance, and applications of an original ytterbium(III) sensor based on N¹,N²-bis-[1-(2-hydroxy-1,2-diphenyl)ethylidene]ethanedihydrazide (BHDEH), which acts as a suitable carrier. Because it has a low detection limit of 4.2 × 10^?7 M, the sensor response for the Yb(III) ion is Nernstian over a wide concentration range: four decades of concentration (1.0 × 10^?6 to 1.0 × 10^?2 M). The response time of the electrode is less than 10 s, it can be used in the pH range of 3.2–8.3, and its duration is at least 2 months without any considerable potential divergence. The sensor revealed very good selectivity for Yb(III) in the presence of several metal ions. To investigate the sensor analytical applicability, it was tested as an indicator electrode in the potentiometric titration of Yb(III) solution with standard EDTA solution. The proposed electrode was also used to determine fluoride ions in mouthwash.     

Investigations on adsorption potentiometry Part I. Derivative adsorption chronopotentiometry of the iron(III)-2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol system

An electroanalytical method, based on derivative chronopotentiometry of the iron complex with 2-(5′-bromo-2′- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) accumulated adsorptively on the surface of a hanging mercury drop electrode, for determining trace iron in food has been developed. The dependences of the peak height on the dt/dE vs. E curve on the preconcentration time, preconcentration potential and electrode area are discussed. Optimum experimental conditions include 0.005 mol 1^?1 NH₃NH₄Cl, 2 × 10^?7 mol 1^?1 5-Br-PADAP and a preconcentration potential of ?0.40 V (vs. SCE). Under these conditions, the detection limit and the linear range are 2 × 10^?9 and 6.7 × 10^?9?1.7 × 10^?7 mol 1^?1, respectively. The relative standard error of the method is 1.5% for 6.7 × 10^?8 mol 1^?1 Fe(III). The method was applied to samples of microwave digested food.     

Liquid-state mercury(II) ion-selective electrode based on N-(O,O-diisopropylthiophosphoryl)thiobenzamide

A liquid ion-exchange electrode containing a complex of mercury(II) with N-(O,O-diisopropylthiophosphoryl)thiobenzamide in carbon tetrachloride is described. The electrode shows excellent sensitivity and good selectivity. The slope of the calibration graph is 29.0 mV/pHg²⁺ in the pHg²⁺ in the pHg²⁺ range 2–15.2 in mercury(II) ion buffers. The electrode can be used for determination of 5 × 10^?5–10^?2 M Hg(II) in the presence of 10^?2 M Cu(II), Ni(II), Co(II), Zn(II), Pb(II), Cd(II), Mn(II), Fe(III), Cr(III), Bi(III) or Al(III) ions and in the presence of 10^?3 M Ag(I) ions. It can bealso used for end-point detection in titrations with EDTA of 10^?3–10^?4 M mercury(II) at pH 2.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Polymeric Membrane Lanthanum(III)‐Selective Electrode Based on N,N′‐Adipylbis(5‐phenylazo salicylaldehyde hydrazone)

A recently synthesized azao‐containing Schiff's base N,N′‐adipylbis(5‐phenylazo salicylaldehyde hydrazone) was used as a suitable neutral ion carrier in construction of a highly selective La³⁺‐PVC membrane electrode. The electrode exhibits a Nernstian response with a slope of 19.4 mV decade^?1 over a wide concentration range (1.0×10^?6–1.0×10^?2 M) and a limit of detection of 4.0×10^?7 M (0.05 ppm). The electrode possesses a fast response time of ca. 10 s and can be used for at least 3 months without observing any deviation. The proposed electrode revealed excellent selectivity for La³⁺ over a wide variety of alkali, alkaline earth, transition and heavy metal ions and could be used in a pH range of 4.0–8.0. The practical utility of the electrode has been demonstrated by its use as an indicator electrode in the potentiometric titration of La³⁺ ions with EDTA and in determination of F^? ion in some pharmaceutical preparations.     

Extraction-spectrophotometric determination of nickel in steels and aluminium metal with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine and ethyl tetrabromophenolphthalein

Nickel ions react with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine in aqueous solution at pH 6.8 to form a red 1:3 complex cation which can be extracted at pH 6.3 into 1,2-dichloroethane with ethyl tetrabromophenolphthalein anion as an ion association compound having an absorption maximum at 610 nm. The apparent molar absorptivity is 2.21 × 10⁵ l mol^?1 cm^?1 and a linear calibration graph is obtained in the range 0–0.05 μg ml^?1 (0?8.52 × 10^?7 M) nickel in aqueous solution. The r.s.d, is 1.5%. This method can be applied to the determination of traces of nickel in steels and aluminium chips.     

Selective Spectrophotometric Determination of Palladium (II) With 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)-Phenol

Abstract

A spectrophotometric study of the Pd(II) complex of a reagent 2-(5-Bromo-2-Pyridylazo)-5-(diethylamino)-Phenol (5-Br-PADAP) is presented. A violet complex is formed at pH 3.53, and shows maximal absorbance at 585 nm with molar absorptivity of 3.86 × 10⁴ 1. mol^?1 cm^?1. Beer's law is obeyed up to 50 μ of Pd(II). The method offers the advantages of simplicity, high precision, requires no extraction and is very selective, where 5.0 mg Pt(VI) and 0.3 mg Au(III) ions do not interfere.     

Ion-selective electrodes based on siderophores: Salicylate response of a ferrimycobactin membrane

Siderophores are compounds which transport iron across cell membranes; mycobactins are hydrophobic siderophores and were expected to be suitable for inclusion in the organic membrane phase of a liquid ion-exchange electrode responsive to iron(III) ions. In practice, no iron(III) response was obtained from mycobactin membranes (in a variety of solvents), but they did respond to salicylate ion with a sensitivity of 27–29 mV/decade over the range 2 × 10^?3–3 × 10^?2 mol l^?1 at pH 7. The effects of pH and interference by other anions are described and the possible mechanisms of the electrode are discussed. The selectivity of the electrode for salicylate is better than that of quaternary ammonium liquid ion-exchange electrodes.     

Erbium(III) PVC Membrane Ion-Selective Sensor based on 4-(2-Thiazolylazo)resorcinal

Abstract

4-(2-Thiazolylazo)resorcinol (TR) was used as a new compound to play the role of an excellent ion carrier in the fabrication of an Er(III) membrane electrode. The electrode shows a very good selectivity toward Er(III) ions over a wide variety of cations, including alkali, alkaline earth, transition, and heavy-metal ions. The proposed sensor exhibits a Nernstian behavior (with slope of 19.6 ± 0.6 mV per decade) over a wide concentration range (1.0 × 10^?6 to 1.0 × 10^?2 M). The detection limit of the sensor is 6.6 × 10^?7 M. It has a very short response time, in the whole concentration range (～10 s), and can be used for at least 12 weeks in the pH range of 2.8–9.3. The proposed sensor was successfully applied as an indicator electrode for the potentiometric titration of a Er(III) solution, with EDTA. It was also successfully applied to the F^? ion determination in some mouthwashing solutions.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.     

Rate constants for the reaction of (sP) atoms with SO2 (M = N2O) over the temperature range 299–392 K

Third order rate constants have been determined for the reaction O + SO₂ + N₂O → SO₃ + N₂O over the temperature range 299–392 K using a modulation technique. The Arrhenius expression obtained is k₂^N₂O = 3.32 × 10¹⁰ exp[?(2000±400)/RT] liter² mole^?2 s^?1. This temperature dependence is in good agreement with recent flash photolysis-resonance fluorescence measurements using N₂ as a third body.     

Simultaneous Determination of Nickel and Cobalt as Chelates with 1-(2-Pyridylazo)-2-naphthol Using an LC Switching Column Method

A simple liquid chromatographic method was developed for the separation and simultaneous determination of cobalt and nickel as chelates with 1-(2-pyridylazo)-2-naphthol (PAN). The method, using a switching column technique for the on-line purification and separation, enables to reach the sub-microgram per litre concentration level excluding off-line sample treatment with the exception of the derivatization reaction. Two small-sized columns packed with CN- and C₄-bonded stationary phases were selected and used considering their complementary behaviour with respect to chelated Co and Ni ions. The analysis was performed within 10 min using an optimised eluent (water–acetonitrile–methanol–tetrahydrofuran, 40:45:10:5, v/v/v/v) containing Tween 40 (10^?3 M) and acetate buffer (5 × 10^?3 M, pH 4.8). Detection was performed by UV-vis spectrophotometry (λ = 565 nm) permitting to reach quantification limits of 0.9 and 0.5 μg L^?1 for Co and Ni, respectively.     

Structure and properties of 2-[(E)-2-(4-dipropylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium chloride

The structure of styryl dye, 2-[(E)-2-(4-dipropylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium chloride (I), was investigated using methods such as UV-VIS, fluorescence spectroscopy, and NMR (¹H, ¹³C, APT, HMQC, COSY) and also by examining its electrochemical properties. A study of the acid-base properties revealed the existence of three different forms of the dye. The mechanisms of protolysis and hydrolysis are discussed. The reagent exists in a reactive single-charged form I ⁺ over a wide range of acidity (pH 4–11). The optimum analytical wavelength of the singlecharged form is 550 nm, where the molar absorptivity is 5.51 × 10⁴ L mol^?1 cm^?1. The values of the optimum analytical wavelength and molar absorptivity of the protolysed and hydrolysed forms are: λ _max(I-H²⁺) = 380 nm, ?(I-H²⁺) = 2.01 × 10⁴ L mol^?1 cm^?1; λ _max(I-OH) = 320 nm, ?(I-OH) = 1.12 × 10⁴ L mol^?1 cm^?1. A theoretical study of the spectral and chemical properties of I was carried out by performing quantum chemical calculations.     

Adsorptive Preconcentration for Voltammetric Measurements of Trace Level of Iron (III) With 2- (2- Thiazolylazo)-4-Methylphenol

Abstract

This paper describes an electrochemical stripping procedure for ultratrace measurements of iron, in which preconcentration is achieved by the adsorption of a iron-[2-thiazolylazo)-4- methyl phenol] complex onto a static mercury drop electrode Cyclic voltammetry was used to characterize the interfaciai and redox behavior. For a 5 minute preconcentration time, the detection limit found was 1.8 × 10^?0mol/1. Optimum experimental conditions were found by the use of a stirred triethanolamine (pH 8.6) solution with 2-[2-thiazolylazo- 4- methyl phenol] concentration of 1.0 × 10^?5 mol/1, a preconcentration potential of ?0.46V and linear scan mode. With preconcentration for 30 sec., calibration plots for iron are linear for the 5–29 μ g/1 range. Possible interferences by masking agents and several trace ions have been investigated. The interference of copper and uranium are eliminated by addition of CyDTA and carbonate ion respectively. Simultaneous determination of iron with copper and nickel is possible. The merits of the aforementioned procedure are demonstrated in the analysis of fresh water.     

Decomposition kinetics of the N-bromoaminoacids,N-bromoalanine,N-bromo-2-aminobutyric acid,and N-bromonorvaline

A kinetic study of the decomposition reactions of N-bromoalanine, N-bromo-2-aminobutyric acid, and N-bromonorvaline shows them to be first-order with respect to N-bromoaminoacid concentration and independent of both excess aminoacid and pH over the interval pH 9–11. In this pH range the mean rate constants at 298 K were 1.20 × 10^?3 s^?1, 1.37 × 10^?3 s^?1 and 1.28 × 10^?3 s^?1, respectively. © 1993 John Wiley & Sons, Inc.     

Asymmetrical Schiff Bases as Carriers in PVC Membrane Electrodes for Cadmium (II) Ions

5‐[((4‐Methyl phenyl) azo)‐N‐(6‐amino‐2‐pyridin) salicylaldimine] (S₁), and 5‐[((4‐methyl phenyl) azo)‐N‐(2‐diamino‐2‐cyano‐1‐ethyl cyanide) salicylaldehyde] (S₂) with N and O donor atoms are effective ionophores to make Cd²⁺‐selective membrane electrodes. The electrodes based on S₁ and S₂ exhibits a Nernstian or near‐Nernstian response for cadmium ion over a wide concentration range 1.5×10^?1–7.5×10^?7 with a slope of 28 and 2.0×10^?1–4.0×10^?7 with a slope of 22, respectively. They have quick response and can be used for three or four months without any divergence in potential. The proposed sensors show fairly good selectivity over some alkali, alkaline earth, transition and heavy metal ions. The electrodes based on S₁ and S₂ can be used in the pH range 3.5–9. These electrodes were used as an indicator electrode in potentiometric titration of cadmium ion with EDTA and in the direct determination of cadmium ion in aqueous solutions.