Detection of arsenic-containing hydrocarbons in a range of commercial fish oils by GC-ICPMS analysis

The present study describes the use of a simple solid-phase extraction procedure for the extraction of arsenic-containing hydrocarbons from fish oil followed by analysis using gas chromatography (GC) coupled to inductively coupled plasma mass spectrometry (ICPMS). The procedure permitted the analysis of a small sample amount, and the method was applied on a range of different commercial fish oils, including oils of anchovy (Engraulis ringens), Atlantic herring (Clupea harengus), sand eel (Ammodytes marinus), blue whiting (Micromesistius poutassou) and a commercial mixed fish oil (mix of oils of Atlantic herring, Atlantic cod (Gadus morhua) and saithe (Pollachius virens)). Total arsenic concentrations in the fish oils and in the extracts of the fish oils were determined by microwave-assisted acid digestion and ICPMS. The arsenic concentrations in the fish oils ranged from 5.9 to 8.7 mg kg^?1. Three dominant arsenic-containing hydrocarbons in addition to one minor unidentified compound were detected in all the oils using GC-ICPMS. The molecular structures of the arsenic-containing hydrocarbons, dimethylarsinoyl hydrocarbons (C₁₇H₃₈AsO, C₁₉H₄₂AsO, C₂₃H₃₈AsO), were verified using GC coupled to tandem mass spectrometry (MS/MS), and the accurate masses of the compounds were verified using quadrupole time-of-flight mass spectrometry (qTOF-MS). Additionally, total arsenic and the arsenic-containing hydrocarbons were studied in decontaminated and in non-decontaminated fish oils, where a reduced arsenic concentration was seen in the decontaminated fish oils. This provided an insight to how a decontamination procedure originally ascribed for the removal of persistent organic pollutants affects the level of arsenolipids present in fish oils.     

Comparative evaluation of retention of hydrocarbons present in the C5-petroleum fraction on methylsilicone and squalane phases

Summary The retention of hydrocarbons present in the C₅ pyrolysis fraction of gasolines on the stationary phases squalane and methylsilicone oil JXR at 30, 40 and 50°C was investigated by capillary gas chromatography. The unified retention indices of the hydrocarbons were also calculated on squalane. The retention indices obtained on these two phases were interrelated and the quantitative relationship with the structure of the solutes was studied. Equations based on the unified retention indices calculated on squalane and some selected structural elements of the solutes permit the calculation of their retention on methylsilicone with sufficient accuracy.     

Preparation of a sulfoxide group and ammonium-salt bonded silica stationary phase for separation of polychlorinated biphenyls from mineral oils

In this study, a silica stationary phase modified with sulfoxide group and ammonium-salt was prepared for the separation of polychlorinated biphenyls (PCBs) from mineral oils, and its properties were investigated. Organic sulfide was attached to a diamino (primary and secondary amino) bonded silica surface by an amide bond, and the bonded sulfide groups were oxidized with periodate to afford sulfoxide groups bonded to the stationary phase. The secondary amino groups in the spacer chain were converted to ammonium-salt by the addition of hydrochloric acid. The sulfoxide group and ammonium-salt bonded stationary phase was tested for their suitability as adsorbent for SPE-type preparative short columns and for an analytical HPLC-type separation. The new stationary phase (1.2 mmol of sulfur bonded per gram) separated PCBs from mineral oils (paraffin-based transformer oils) more efficiently than previously reported stationary phases including sulfoxide group or ammonium-salt bonded ones. The quantitative chromatographic parameters for an aliphatic hydrocarbon (eicosane) and some PCB congeners also indicated strong retention of highly chlorinated biphenyls by the sulfoxide and ammonium-salt bonded silica compared with simple aminopropyl, sulfoxide group or ammonium-salt bonded ones. A cleanup procedure was established for simple determination of PCBs in mineral oil samples using sulfoxide group and ammonium-salt bonded silica packed column fractionation. The analytical method, combination of the cleanup procedure, and measurement with a GC-high resolution (magnetic sector) MS or a GC-quadrupole MS were validated using mineral oil certified reference materials.     

Effect of the chain length on the thermal and analytical properties of laterally biforked nematogens

Three laterally substituted liquid crystals were synthesized in order to investigate the effect of a lateral biforked chain on the thermal and analytical properties. The mesogenic molecules have the same core containing four aromatic rings connected by two ester and one diazo linkages, they differ by the length of one chain within the lateral biforked substituent. The phase transition temperatures were obtained by polarized light microscopy and differential scanning calorimetry (DSC). The clearing temperature and the nematic range decrease with increasing length of the lateral biforked chain. The stationary phases derived from these nematogens provide excellent resolution of various classes of compounds, including aromatic hydrocarbons (AH), substituted benzenes, polycyclic aromatic hydrocarbons (PAH), phenols and volatile organic compounds (VOC) present in the essential oils. The selectivities of the stationary phases were found to decrease according to the length of the side chain.     

Retention parameters of aromatic hydrocarbons with mono-substituted polar groups in binary RP-HPLC systems

Summary Capacity factor (k′) values of aromatic hydrocarbons with mono-substituted polar-groups are correlated for reversed-phase systems involving stationary phases with C₁₈ or C₄ ligands chemically bonded to silica and a binary aqueous eluent containing modifiers: methanol, acetonitrile, tetrahydrofuran, isopropanol, dioxane or dimethoxyethane. The relative retention variations of the solutes are interpreted with special consideration of their interactions with non-polar stationary phases and the molecular structure of the modifiers and solutes. Rules for retention and selectivity optimisation in RP-HPLC systems are given.     

New Fullerene-Based Stationary Phases for Gas Chromatography

Regularities were revealed for the retention of different classes of organic compounds on stationary phases based on C₆₀ and carbon nanotubes and on phases of mixed composition (C₆₀ and dibenzo-24-crown-8, C₆₀ and dibenzo-30-crown-10, and C₆₀ and -cyclodextrin) in gas chromatography. A synergistic effect was observed for the stationary phases of mixed composition. Quantitative estimation of the dispersion potential demonstrated that the C₆₀-based stationary phase differs significantly from hydrocarbon adsorbents and more closely resembles nonpolar liquid stationary phases. Under the conditions of solid-phase microextraction, an adsorbing element based on fullerene C₆₀ can be used for the preconcentration of aromatic hydrocarbons.     

Cyclam complexes of Cu(II) and Co(II) as stationary phases for gas chromatography

New macrocyclic stationary chemically bonded phases were synthesized and tested in gas chromatography conditions. The complexes of 1,4,8,11-tetraazacyclotetradecane with Cu(II) and Co(II) were bonded to the silica support through the (3-chloropropyl)triethoxysilane reactant. The packings obtained were analyzed by diffuse-reflectance ultraviolet–visible spectroscopy (DRUV–Vis), differential thermal gravimetry (DTG), porosimetry, and elementary analysis. Preliminary study of the novel silica gas chromatography (GC) stationary phases containing cyclam complexes was carried out using packed 1/8 in. i.d. columns. The study was conducted on: cyclic, linear and branched olefins, aromatic hydrocarbons and ethers. Characterization of interactions between the compounds mentioned and new stationary phases was based upon analysis of Kováts retention indices (I), difference between retention indices for two phases (ΔI), and molecular retention indices (ΔM_e). Results have shown that the new stationary phases interact sufficiently strongly with molecules of high electron density and can be applied in capillary gas chromatography for the analysis of light hydrocarbons.     

Separation of polycyclic aromatic hydrocarbons with a C60 bonded silica phase in microcolumn liquid chromatography

A chemically bonded C₆₀ silica phase was synthesized as a stationary phase for liquid chromatography (LC) and its retention behavior evaluated for various polycyclic aromatic hydrocarbons (PAHs) using microcolumn LC. The results indicate that the C₆₀ bonded phase offers selectivity different from that of octadecylsilica (ODS) bonded phases in the separation of isomeric PAHs. With the C₆₀ phase, PAH molecules having a partial structure similar to that of the C₆₀ molecule, e.g. triphenylene and perylene, were retained longer than with ordinary ODS stationary phases. The results also show that good correlation exists between the retention data with this C₆₀ bonded phase and with C₆₀ itself as the stationary phase.     

Thermal kinetics study of light oil oxidation using TG/DTG techniques

In this study, the oxidation behavior of crude oils in the presence and absence of rock cuttings was investigated by thermogravimetry/derivative thermogravimetry (TG/DTG) techniques. Prior to these tests, the composition of cuttings and properties of crude oils were analyzed. Three obvious reaction regions were observed from the TG/DTG curves which are recognized as low-temperature oxidation (LTO), fuel deposition (FD), and high-temperature oxidation. The effects of light components (C_7–15), heavy fractions (asphaltene, paraffin, resin), and cutting on oil oxidation behavior were analyzed. Kinetic analysis of crude oils and oil + cutting mixtures was performed by Arrhenius method, and the data were analyzed at last. Results show that high content C_7–15 hydrocarbons can provide negative effect on the LTO behavior of crude oil. On the contrary, the high content unsaturated heavy hydrocarbons including asphaltene, paraffin, and resin are benefit for the oxidation performance. In addition, a shortened FD stage and higher peak temperature in LTO region are observed by addition of cutting. Cutting especially clay in it plays an active role of catalyzing in oil oxidation reaction.     

Chemical composition,antioxidant and antiproliferative activities of essential oil from rhizome and leaves of Curcuma mutabilis Škorničk., M. Sabu & Prasanthk., endemic to Western Ghats of India

Abstract

Hydro-distilled essential oils, from fresh rhizomes and leaves of Curcuma mutabilis ?korni?k., M.Sabu & Prasanthk., characterized by GC–MS revealed the presence of thirty three and twenty three compounds therein respectively. Whilst estrone methyl ether (3-Methoxyestra-1,3,5(10)-trien-17-one) was the major component in rhizome oil (47.35%), sesquiterpene hydrocarbons predominated as the major group (63.92%) in leaf oil with a higher preponderance of β-caryophyllene (25.48%), β-farnesene (19.47%) and α-humulene (11.01%). Weak antioxidant activities observed in these oils determined by DPPH and ABTS methods were apparently influenced both by the oil composition and the assay conditions. Rhizome oil showed higher antiproliferative activity than leaf oil against leukemic K562 (IC₅₀-6.8µg/mL) and colorectal HCT116 (IC₅₀-8.5µg/mL) cancer cell lines. This first report reveals composition and biological activities of essential oils from C. mutabilis.     

Chemical characterisation of the different types of volatile oil constituents by various solute retention ratios with the use of conventional and novel commercial gas chromatographic stationary phases.

Retention ratios of an unknown solute peak from a volatile oil can help to identify its chemical type. Relative retentions on conventional stationary phases can be used to calculate a polar/non-polar ratio which may suggest it is an aromatic solute or a sesquiterpene hydrocarbon. With dipentyl (DA) cyclodextrin phases, gamma-DA/alpha-DA ratios can indicate a bicyclic or monocyclic monoterpenoid. Temperature change on alpha-DA can pick out a non-alcoholic saturated cyclic monoterpenoid, using 150/125 degrees C. Twenty retention ratios are reviewed involving various phases, including other modified cyclodextrins, liquid crystals, "Chirasil-Val" and crown ethers. Applications to six volatile oils are made using a variety of phases.     

烃类化合物在不同色谱柱上的定量结构-保留相关性研究

运用量子化学中的AMI方法计算烃类化合物的分子结构描述参数,借助逐步回归法建立了烃类化合物在不同极性色谱柱上的QSRR模型。结果表明：烷烃、烯烃、二烯烃类化合物在不同极性的色谱柱上的色谱保留与其分子结构描述参数之间具有较好的线性关系,烃类化合物在不同极性固定相上的保留主要与溶质分子的MR有关,即与溶质分子的色散力有关。随着溶质分子的不饱和度的增加,或固定相极性的增强,溶质分子与固定相之间的电荷传递作用随之增强。而且,烃类化合物在不同极性固定相上的色谱保留的QSRR模型均可用量化参数HOMO、LUMO、EICE以及MR参数来描述。所建立的在不同极性色谱柱上的烃类化合物的色谱保留QSRR模型预测烃类化合物的色谱保留值时具有较好的稳定性和准确性。     

GC/MS Analysis of Polymethoxyflavones in Citrus Oils

The cold pressed peel oils of three species of citrus fruit, viz. sweet orange, tangerine, and grapefruit, have been examined for polymethoxyflavones by GC and GC-MS. Four GC column stationary phases were compared and separation of the six predominant orange oil polymethoxyflavones was obtained isothermally at 310°C in under ten minutes, including the resolution of the polymethoxyflavones from β-sitosterol. The nature of the stationary phase and the analysis temperature exercise dramatic effects on the resolution and elution order of the components, DB-35ms providing the best overall separation. A temperature programmed separation is also presented and the polymethoxyflavone composition of all three oils, as determined by GC-MS, is described. This is the first reported GC-MS study of the PMFs of these citrus species. While tangerine oil is as rich in polymethoxyflavones as orange oil, they are less abundant and occur at lower concentrations in grapefruit oil. Hydroxy-polymethoxyflavones were identified by GC-MS in tangerine oil. One hydroxy-pentamethoxyflavone, M⁺ = 388, identified in tangerine was also present at low levels in both orange and grapefruit oils. These results are compared with previous studies utilizing HPLC and GC.     

Chemical variability and antioxidant activity of Cedrus atlantica Manetti essential oils isolated from wood tar and sawdust

The present research was devoted to evaluating the effect of provenance and wood pyrolysis process on the phytochemical and antioxidant activity of essential oils extracted from sawdust and tar of Cedrus atlantica Manetti of Morocco. The essential oils were obtained by hydro-distillation from Cedar wood growing in two geographical locations of the Middle Atlas of Morocco (Senoual and Itzer forests) using a Clevenger-type apparatus and analyzed by Gas Chromatography-Mass spectrometry (GC/MS). Seventy compounds were approximately identified for each essential oil, accounting for 94% of the total oil’s composition, with the predominance of sesquiterpene hydrocarbons, where, α-himachalene (13.75%, 1.15%, 12.2%, and 16.69%) and β-himachalene (24.05%, 24.25%, 27.67%, and 44.23%) represented the major constituents in the four essential oils obtained. Multivariate analysis was used to discriminate the essential oils using principal component analysis (PCA) and Hierarchical Clustering Analysis (HCA). In addition, heatmap for dendrogram was used to investigate any correlation between the chemical profiles of each essential oil. Moreover, the antioxidant properties of the essential oils were studied using DPPH scavenging and Ferric Ion Reducing Power (FRAP). The results indicate that the essential oils from wood tar of Cedrus atlantica possess a strong antioxidant activity (IC₅₀ = 0.126 mg/mL and 0.143 mg/mL) in comparison with those from sawdust (IC₅₀ = 15.6 mg/mL and 16.3 mg/mL).     

Chromatography Modeling Software Applicability for Non-Conventional Columns: a Case Study of Calixarene- and Resorcinarene-Bonded Stationary Phases

In this study a systematic evaluation of the applicability of DryLab for calixarene- and resorcinarene-bonded stationary phases and some other relatively new reversed-phase columns with the presence of conventional alkyl-bonded phases was carried out. Calixarene- and resorcinarene-bonded stationary phases belong to the reversed-phase materials. However, depending on the analytes, they show some additional interactions, since their steric, polar and ionic properties are different compared to those of conventional alkyl-bonded phases. Three different mixtures of model analytes, consisting of alkyl substituted benzene derivatives, 4-hydroxybenzoic acid esters and polycyclic aromatic hydrocarbons, were used to verify the accuracy of DryLab prediction of retention times and to compare the results of 20 different liquid chromatographic phases. The type and the content of the organic modifier as well as the temperature and the gradient time were systematically changed using same conditions for all stationary phases. The results showed that the prediction on the calixarene- and resorcinarene-bonded stationary phases as well as on other reversed-phase columns is highly accurate in both isocratic and gradient modes. The predictions and real experiments were highly correlated with an average absolute error (?t _R) of 0.027 min (<2 s) and an average percent absolute error (%?t _R) of 0.38 on the calixarene- and resorcinarene-bonded stationary phases, and ?t _R of 0.04 min (<3 s); %?t _R of 0.51 on the other reversed-phase columns in this study. As a result, DryLab could be applied with very accurate predictions in method development using calixarene- and resorcinarene-bonded stationary phases, which were used as an example for “new” stationary phase materials.     

Chromatography Modeling Software Applicability for Non-Conventional Columns: a Case Study of Calixarene- and Resorcinarene-Bonded Stationary Phases

In this study a systematic evaluation of the applicability of DryLab for calixarene- and resorcinarene-bonded stationary phases and some other relatively new reversed-phase columns with the presence of conventional alkyl-bonded phases was carried out. Calixarene- and resorcinarene-bonded stationary phases belong to the reversed-phase materials. However, depending on the analytes, they show some additional interactions, since their steric, polar and ionic properties are different compared to those of conventional alkyl-bonded phases. Three different mixtures of model analytes, consisting of alkyl substituted benzene derivatives, 4-hydroxybenzoic acid esters and polycyclic aromatic hydrocarbons, were used to verify the accuracy of DryLab prediction of retention times and to compare the results of 20 different liquid chromatographic phases. The type and the content of the organic modifier as well as the temperature and the gradient time were systematically changed using same conditions for all stationary phases. The results showed that the prediction on the calixarene- and resorcinarene-bonded stationary phases as well as on other reversed-phase columns is highly accurate in both isocratic and gradient modes. The predictions and real experiments were highly correlated with an average absolute error (∆t _R) of 0.027 min (<2 s) and an average percent absolute error (%∆t _R) of 0.38 on the calixarene- and resorcinarene-bonded stationary phases, and ∆t _R of 0.04 min (<3 s); %∆t _R of 0.51 on the other reversed-phase columns in this study. As a result, DryLab could be applied with very accurate predictions in method development using calixarene- and resorcinarene-bonded stationary phases, which were used as an example for “new” stationary phase materials.

     

Evaluation of the Effect of Citronellol Group on Functionalized Mesogenic Materials by Capillary GC

In this paper, the effects of functionalization with terpenes on two new liquid-crystalline stationary phases for gas chromatography (GC) are described. Citronellol was used as the terminal group in the first material, and tetrahydrogeraniol was used with a second material. Inverse GC showed that the new materials have wide liquid-crystalline ranges (mesophases), 371–500 and 395–501 K, respectively. Moreover, they show good thermal stability up to 523 K and good potential as stationary phases for capillary GC. To clarify the effects of the liquid crystal structures and functional groups on retention and separation, the chromatographic behaviors of the two stationary phases were compared by eluting alkylbenzenes, polycyclic aromatic hydrocarbons, aromatic compounds, and terpenoids. The selectivities for a wide range of analytes achieved using the citronellol column were significantly better than those obtained using the tetrahydrogeraniol column. The columns showed different retention behaviors and fine resolutions for some of the main constituents of essential oils. Introduction of the double bond of citronellol greatly improved the polarization interactions involved in the shape recognition of the liquid-crystalline state for isomers. The new citronellol liquid-crystalline stationary phase, therefore, has a high affinity for natural compounds.

     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Polycyclic aromatic hydrocarbons (PAHs) in edible oils by gas chromatography coupled with mass spectroscopy

The occurrence of polycyclic aromatic hydrocarbons (PAHs) in nine edible oils of three categories of oil samples, such as soy bean oil, mustard oil and coconut oil, has been studied to determine the contamination degree of this type of oil samples. Eight major carcinogenic polycyclic aromatic hydrocarbons (PAHs), such as naphthalene, anthracene, phenanthrene, fluorene, pyrene, crysene, benzo(a)pyrene and benzo(a)anthracene, were identified and quantified in the extract of edible oils collected from Bangladeshi Markets by gas chromatography and mass spectroscopy. All of the carcinogenic PAHs are not present in the edible oils. A few of the carcinogenic PAHs are present in the oils but it is within the permissible limit. The results for the recoveries of naphthalene, fluorene, phenanthrene, anthracene, pyrene, crysene, benzo(a)anthracene and benzo(a)pyrene were in the range of 56–84%. The limit of detection (LOD) of the GC–MS method, established at signals three times that of the noise for naphthalene, fluorene, phenanthrene, anthracene, pyrene, crysene, benzo(a)anthracene and benzo(a)pyrene, was 2.0–2.5 ng, respectively.     

Determination of petitgrain oils landmark parameters by using gas chromatography–combustion–isotope ratio mass spectrometry and enantioselective multidimensional gas chromatography

Gas chromatography–combustion–isotope mass spectrometry was employed for the assessment of the Carbon isotope ratios of volatiles in Italian mandarin and lemon petitgrain oils. In addition, the composition of the whole oil and the enantiomeric distribution of selected chiral compounds were determined for all the samples by using gas chromatography and by multidimensional and conventional enantioselective gas chromatography. The composition of the oils was compared with previous studies. The enantiomeric distribution of lemon petitgrain oils is here reported for the first time. On the composition of mandarin petitgrain oil, the information available in literature, to date, is relative only to one sample from Egypt. Carbon isotope ratio of several terpene hydrocarbons and of their oxygenated derivatives contained in petitgrains was compared with the δ ¹³C_VPDB values of the same compounds present in the corresponding genuine Italian Citrus peel oil. The results prove that the isotopic values obtained for lemon and mandarin petitgrain oils are very close to those relative to the corresponding peel oils determined in previous studies.