Determination of propazine by differential pulse polarography in micellar and emulsified media

An electroanalytical study of the herbicide propazine's reduction process in micellar solutions and oil-in-water emulsions is reported. The anionic surfactant sodium pentanesulphonate was chosen as the most suitable. The differential pulse polarograms of micellar solutions had two reduction peaks below pH 2.0, whereas only one peak was obtained above pH 2.O. Ethyl acetate was chosen as the organic solvent to form propazine emulsions. Unlike in micellar solutions, the DPP polarograms of propazine emulsions showed only one peak even at pH < 2.0, suggesting that propazine hydrolysis was hindered in the emulsified medium. The limiting current is diffusion-controlled and the electrode process is irreversible. Propazine can be determined by differential pulse polarography over the 1.0 × 10^–1 – 1.0 × 10^–1moll^–1 and 1.0 × 10^–15 – 4.0 × 10^–1 moll^–1 concentration ranges and the limit of detection was 2.8 × 10^–1 moll^–1. Of the potential interferents simazine, methoprotryne and terbutryn (alls-triazines), thiram (a dithiocarbamate), dinoseb (nitrophenolic), and heptachlor (chlorinated cyclo-diene herbicide), only the first two were significant (10% error for equimolar concentrations). The method was applied to the determination of propazine in spiked drinking water. At a concentration level of 2.0 × 10^–1 moll^–1 a recovery of 94 ± 6% was obtained, after tenfold concentration on Sep-Pak.     

Electroanalytical study of diethyl and dibutyl phthalate in micellar and oil-in-water emulsified media

A polarographic study was carried out of the reduction processes of diethyl and dibutyl phthalate in micellar solutions with the cationic surfactant Hyamine 1622, and in an emulsified medium from aliquots of the phthalates dissolved in a diethyl ether: ethyl acetate (1:9) mixture and Hyamine 1622 as emulsifying agent. The characteristics of the reduction processes in both media were established. The number of electrons involved was higher for the base form of the electroactive species. Using dpp at E=–50 mV, the detection limits obtained in the emulsified medium were 6.7×10^–8 and 7.4×10^–7 moll^–1 for diethyl phthalate and dibutyl phthalate, respectively. Interferences between the two phthalates were studied, and the possibility of carrying out the overall determination of both phthalates was demonstrated. Good results were obtained when applying the polarographic method developed in the emulsified medium to determine diethyl phthalate by dpp in spiked milk after extraction of the analyte with diethyl ether: ethyl acetate (1:9).     

Determination of heavy metals in environmental bio-indicators by voltammetric and spectroscopic techniques

The determination of copper, lead, cadmium and zinc in matrices involved in the food chain as algae, species Ulva rigida, and clams, species Tapes philippinarum by differential pulse anodic stripping voltammetry (DPASV) was carried out. For the mercury determination in these matrices, a new accurate and precise method was developed employing a mixture of concentrated acids H₂SO₄-K₂Cr₂O₇ for digestion and subsequent cold vapor atomic absorption spectrometry (CV-AAS) by reduction with SnCl₂. The analytical procedures were verified for four reference standard materials: Ulva lactuca BCR-CRM 279, Lagarosiphon major BCR-CRM 060, Oyster tissue NBS-SRM 1566, Mussel tissue BCR-CRM 278. For all the elements the precision, expressed as relative standard deviation (s_r), and the accuracy, expressed as relative error (e), were in the order of 3 to 5%, while the detection limits were in the range 0.010–0.100 μg/g. The standard addition technique improved the resolution of the voltammetric method even in the case of very high element concentration ratios. The analytical procedure was used for real matrices sampled in the Adriatic Sea south to Po river mouth, in the zone “Goro bay”, and at open sea north to the Ravenna shore. Received: 7 June 1998 / Revised: 2 November 1998 / Accepted: 5 November 1998     

Determination of heavy metals in environmental bio-indicators by voltammetric and spectroscopic techniques

The determination of copper, lead, cadmium and zinc in matrices involved in the food chain as algae, species Ulva rigida, and clams, species Tapes philippinarum by differential pulse anodic stripping voltammetry (DPASV) was carried out. For the mercury determination in these matrices, a new accurate and precise method was developed employing a mixture of concentrated acids H₂SO₄-K₂Cr₂O₇ for digestion and subsequent cold vapor atomic absorption spectrometry (CV-AAS) by reduction with SnCl₂. The analytical procedures were verified for four reference standard materials: Ulva lactuca BCR-CRM 279, Lagarosiphon major BCR-CRM 060, Oyster tissue NBS-SRM 1566, Mussel tissue BCR-CRM 278. For all the elements the precision, expressed as relative standard deviation (s_r), and the accuracy, expressed as relative error (e), were in the order of 3 to 5%, while the detection limits were in the range 0.010–0.100 μg/g. The standard addition technique improved the resolution of the voltammetric method even in the case of very high element concentration ratios. The analytical procedure was used for real matrices sampled in the Adriatic Sea south to Po river mouth, in the zone “Goro bay”, and at open sea north to the Ravenna shore.     

Separation of coumarins by micellar electrokinetic capillary chromatography

Nine coumarins were successfully separated simultaneously using micellar electrokinetic capillary chromatography with 4-hydroxybenzoic acid as an internal standard. A carrier composed of buffer solution (20 mM sodium dodecyl sulfate-15 mM sodium borate-15 mM sodium dihydrogenphosphate)-acetonitrile (24:1) was found to be the most suitable electrolyte for this separation. The analysis time (22 min) was shorter than that using high-performance liquid chromatography (47 min). Contents of coumarins in the crude drug of Angelicae Tuhou Radix could be easily determined by the proposed method.     

Determination of TNT and its metabolites in water samples by voltammetric techniques

Square-wave voltammetry with the hanging drop mercury electrode as the working electrode was used for the determination of ultratraces of explosives in aqueous solution. It was shown that the strong pressure dependence of the pneumatically controlled multimode electrode system of a conventional Metrohm apparatus could be compensated by an additional pressure regulation, through which the pressure variations could be decreased when switching from deaeration to the static measurements. By using square-wave voltammetry with this electrode system after this modification the limits of detection for 2,4,6-trinitrotoluene (TNT) and other TNT-metabolites could be decreased down to 0.2 μg L⁻¹ when using a measurement time of 6 min. Also a simultaneous determination of TNT and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) was shown to be possible over a wide linear range and the detection limits then were 2.2 μg L⁻¹ for TNT and 25 μg L⁻¹ for RDX. By applying the highly stable and adjustable pressure as mentioned before, the calibrations could be kept stable over a period of up to 1 week.     

Determination of zinc in foods by fluorescence spectroscopy in micellar media

The effect of cationic [cetyltrimethylammonium bromide (CTAB), Zephiramine], non-ionic (Triton X-100, Brij-35) and anionic (sodium lauryl sulphate) surfactant micelles on the fluorescence intensity of the zinc 5,7-dichloro-2-methylquinolin-8-ol chelate is described. In Brij-35 or CTAB micellar media, the fluorescence is about 25 times greater than that obtained in ethanol-water. The relationship between fluorescence intensity and experimental variables was studied in order to develop a procedure for the fluorimetric determination of zinc. Linear calibration graphs were obtained in the ranges 3–100 and 50–400 ng Zn ml^?1. The detection limit is 3 ng ml^?1. The method was successfully applied to the determination of zinc in food samples and drinking waters.     

Determination of vitamins A and E in milk samples by fluorescence in micellar media

The fat-soluble vitamins A and E in milk samples were determined by fluorescence at room temperature in an aqueous media of micellar solutions. Different types of surfactants were studied; the cationic hexadecyltrimethylammonium bromide (CTAB), the anionic sodium dodecylsulfate (SDS) and the non-ionic polyoxyethylene(23)laurylether (Brij 35). The detection limits ranged between 50 and 90 ng · L^–1 for both vitamins in CTAB and Brij 35. The method has been applied to the determination of vitamins A and E in milk samples. Received: 30 June 2000 / Revised: 13 September 2000 / Accepted: 16 September 2000     

Determination of vitamins A and E in milk samples by fluorescence in micellar media

The fat-soluble vitamins A and E in milk samples were determined by fluorescence at room temperature in an aqueous media of micellar solutions. Different types of surfactants were studied; the cationic hexadecyltrimethylammonium bromide (CTAB), the anionic sodium dodecylsulfate (SDS) and the non-ionic polyoxyethylene(23)laurylether (Brij 35). The detection limits ranged between 50 and 90 ng.L-1 for both vitamins in CTAB and Brij 35. The method has been applied to the determination of vitamins A and E in milk samples.     

Determination of platinum-group metals and lead in vegetable environmental bio-monitors by voltammetric and spectroscopic techniques: critical comparison

This paper reports voltammetric sequential determination of Pt(II), Pd(II), and Rh(III), by square-wave adsorption stripping voltammetry (SWAdSV), and Pb(II), by square-wave anodic stripping voltammetry (SWASV), in vegetable environmental matrices. Analytical procedures were verified by the analysis of the standard reference materials: Olive Leaves BCR-CRM 062 and Tomato Leaves NIST-SRM 1573a. Precision and accuracy, expressed as relative standard deviation and relative error, respectively, were always less than 6% and the limits of detection (LOD) for each element were below 0.096 g g^–1. Once set up on the standard reference materials, the analytical procedure was transferred and applied to laurel leaves sampled in proximity to a superhighway and in the Po river mouth area. A critical comparison with spectroscopic measurements is discussed.     

Dephosphorylation of paraoxon by hydroxamate ions in micellar media

The rate-surfactant concentration profiles for the reaction of the insecticide paraoxon with hydroxamate ions (R(CO)·NHO⁻, R = CH₃, R = C₆H₅, R = 2-HOC₆H₄) in aqueous solutions of cetyltrimethylammonium salts, CTAX (X⁻ = Br⁻, Cl⁻, SO₃H⁻) have been measured at pH 11.0 at 30 °C. All these profiles are typical of micelle-assisted bimolecular reactions involving interfacial ion exchanges. The salicylhydroxymic acid-CTACl combination is most reactive.     

Structure and dynamics of surfactin studied by NMR in micellar media

The NMR structure of the cyclic lipopeptide surfactin from Bacillus subtilis was determined in sodium dodecyl sulfate (SDS) micellar solution. The two negatively charged side chains of surfactin form a polar head opposite to most hydrophobic side chains, accounting for its amphiphilic nature and its strong surfactant properties. Disorder was observed around the fatty acid chain, and 15N relaxation studies were performed to investigate whether it originates from a dynamic phenomenon. A very large exchange contribution to transverse relaxation rate R(2) was effectively observed in this region, indicating slow conformational exchange. Temperature variation and Carr-Purcell-Meiboom-Gill (CPMG) delay variation relaxation studies provided an estimation of the apparent activation energy around 35-43 kJ x mol(-1) and an exchange rate of about 200 ms(-1) for this conformational exchange. 15N relaxation parameters were also recorded in dodecylphosphocholine (DPC) micelles and DMSO. Similar chemical exchange around the fatty acid was found in DPC but not in DMSO, which demonstrates that this phenomenon only occurs in micellar media. Consequently, it may either reflect the disorder observed in our structures determined in SDS or originate from an interaction of the lipopeptide with the detergent, which would be qualitatively similar with an anionic (SDS) or a zwitterionic (DPC) detergent. These structural and dynamics results on surfactin are the first NMR characterization of a lipopeptide incorporated in micelles. Moreover, they provide a model of surfactin determined in a more biomimetic environment than an organic solvent, which could be useful for understanding the molecular mechanism of its biological activity.     

Effective solubilization of chalcones in micellar phase: Conductivity and voltammetric study

The solubilization of four chalcones, between aqueous and micellar phases of ionic surfactants (SDS and CTAB), was investigated by conductivity and cyclic voltammetry (CV) techniques. From conductivity data, a decrease in the critical micellar concentration (CMC) of the surfactants, in presence of the chalcones was ascribed to the decreased charge density over the surfactants. The results were seconded by thermodynamic parameters including degree of ionization (α), counter ion binding (β), and standard Gibbs free energy of micellization (ΔG _m ^○ ). The added surfactant decreased the peak current of the oxidized chalcone and shifted the peak potential either positively (in presence of SDS) or negatively (in presence of CTAB). The effect is rationalized as chalcone-surfactant interaction and quantitated as binding constant (K _b) assorting values from 8.78 to 552.97 M^?1. The preferred solubilization of the chalcones in the micellar phase has been inferred.     

Determination of furazolidone in urine by square-wave voltammetric method

A fast, simple and sensitive square-wave voltammetric (SWV) method for the determination of trace amounts of furazolidone (FZ) in urine is reported. A three-electrode system containing stationary mercury dropping (SMDE) working electrode, Pt auxiliary electrode and Ag/AgCl reference electrode was used throughout. Briton-Rabinson buffer solution is used as both pH adjusting agent and supporting electrolyte. The calibration graph showed good linearity in the concentration range of 20–900 ng ml^?1 of furazolidone with a regression coefficient of 0.9996. The equation Δ(i) = 0.0095C_FZ + 0.234 was used for calculation of furazolidone concentration in the sample solution, where C_FZ is the concentration of furazolidone in ng ml^?1 and Δ(i) is the difference between voltammogram peak currents of sample and blank solution. The RSD for 8 replicate measurements of a 60 ng ml^?1 solution and LOD of the proposed method were found to be 2.2% and 5.2 ng ml^?1, respectively. The procedure was successfully applied to the determination of furazolidone in urine samples.     

Simultaneous determination of benzodiazepines by ultraviolet--visible spectrophotometry in micellar media

A method for the simultaneous determination of benzodiazepines in binary mixtures is proposed, based on the acid hydrolysis of benzodiazepines to benzophenones and the spectrophotometric determination of the latter in the presence of Nemol K 1030, a non-ionic surfactant condensate of ethylene oxide with nonylphenol. The experimental conditions for the hydrolysis of several benzodiazepines in sealed Pyrex tubes were determined. The addition of Nemol K 1030 to acidic solutions of benzophenones modified the positions of the absorption bands and made possible the simultaneous analysis of binary mixtures of benzodiazepines.     

Room-temperature liquid phosphorimetry of the aluminium-ferron chelate in micellar media : Determination of aluminium

Aluminium reacts with 7-iodo-8-quinolinol-5-sulphonic acid (Ferron) in cetyltrimethylammonium bromide (CTAB) micelles to form a highly phosphorescent complex at room temperature. Suitable experimental conditions and the phosphorescent characteristics of the complex are described. Comparison with the results obtained for the phosphorescent niobium-Ferron complex in CTAB micelles helps to elucidate the mechanism of this type of phosphorescence. For aluminium the detection limit is 5.4 ng ml^?1; the relative standard deviation is 4.5% for 20 μg Al. The method is applied to aluminium determination in waters and dialysis fluids.     

Determination of polycyclic aromatic hydrocarbons in marine sediments by high-performance liquid chromatography after microwave-assisted extraction with micellar media

A simple and rapid method is developed for extraction and determination of polycyclic aromatic hydrocarbons (PAHs) in marine sediments. The procedure was based on the microwave-assisted extraction of PAHs in marine sediment samples using a micellar medium of Polyoxyethylene 10 lauryl ether as extractant. Two-level factorial designs have been used to optimize the microwave extraction process. The analysis of extracts has been carried out by HPLC with UV detection. Fortified sediments gave an average recovery between 85.70 and 100.73%, with a relative standard deviation of 1.77-7.0% for PAHs with a ring number higher than three.     

Determination of nikethamide by micellar electrokinetic chromatography

A simple, fast, sensitive and reproducible micellar electrokinetic chromatography (MEKC)–UV method for the determination of nikethamide (NKD) in human urine and pharmaceutical formulation has been developed and validated. The method exhibits high trueness, good precision, short analysis time and low reagent consumption. NKD is an organic compound belonging to the psychoactive stimulants used as an analeptic drugs. The proposed analytical procedure consists of few steps: dilution of urine or drug in distilled water, centrifugation for 2 min (12,000 g ), separation by MEKC and ultraviolet‐absorbance detection of NKD at 260 nm. The background electrolyte used was 0.035 mol/L pH 9 borate buffer with the addition of 0.05 mol/L sodium dodecyl sulfate and 6.5% ACN. Effective separation was achieved within 5.5 min under a voltage of 21 kV (~90 μA) using a standard fused‐silica capillary (effective length 51 cm, 75 μm i.d.). The determined limit of detection for NKD in urine was 1 μmol/L (0.18 μg/mL). The calibration curve obtained for NKD in urine showed linearity in the range 4–280 μmol/L (0.71–49.90 μg/mL), with R² 0.9998. The RSD of the points of the calibration curve varied from 5.4 to 9.5%. The analytical procedure was successfully applied to analysis of pharmaceutical formulation and spiked urine samples from healthy volunteers.