Type II band alignment and exciton wave functions in Si/Si1−xGex quantum wells

Photoluminescence experiments in high magnetic fields are presented which reveal diamagnetic shifts consistent with a type II CB offset for Si_0.76Ge_0.24 of at least 13 meV. From the magnetoluminescence data evidence for localized and free exciton recombination is found, which would not be separable from each other without magnetic field.     

Si1−xGex/Si multi-quantum well phototransistor for near-infrared operation

For the first time in the literature, we report the monolithic integration of SiGe near-infrared phototransistor and planar hetero-junction bipolar transistor (HBT). The phototransistor is made with SiGe/Si multi-quantum well structure (MQW_PHT). At room temperature, the MQW_PHT reveals an optical responsivity of 1904 mW/A at 0.85 μm and 1.25 mW/A at 1.3 μm under the reversed bias of V_CE=1.5 V. For electrical DC and microwave performance, the SiGe HBT has a current gain of 160 and a cut-off frequency (f_T) of 25 GHz, respectively.     

Photoluminescence and X-ray characterisation of Si/Si1−xGex multiple quantum wells

We present an experimental approach to correlate optical and structural properties of Si/Si_1−xGe_x multiple quantum wells as determined by photoluminescence (PL) and X-ray diffraction, respectively. The optical properties of the quantum wells were characterised by studying the dependence of luminescence on temperature and excitation density. An enhanced PL yield and an increased quenching temperature were observed for a sample grown at 650°C as compared to one grown at 600°C. Pronounced interdiffusion across the multiple quantum well interfaces as well as significant lattice distortions within the SiGe layers have been observed.     

Dispersive optical constants of a-Se100−xSbx films

Thin films of amorphous Se_100−xSb_x (x=5,10 and 20 at%) system are deposited on a silicon substrate at room temperature (300 K) by thermal evaporation technique. The optical constant such as refractive index (n) has been determined by a method based on the envelope curves of the optical transmission spectrum at normal incidence by a Swanpoel method. The oscillator energy (E_o), dispersion energy (E_d) and other parameters have been determined by the Wemple–DiDomenico method. The absorption coefficient (α) has been determined from the reflectivity and transmitivity spectrum in the range 300–2500 nm. The optical-absorption data indicate that the absorption mechanism is a non-direct transition. We found that the optical band gap, E_g^opt, decreases from 1.66±0.01 to 1.35±0.01 eV with increase Sb content.     

First-principles calculations of the optical band-gaps of ZnxCd1−xO alloys

Using first-principles calculations, we investigated the structural and electronic properties of two binaries: ZnO in wurtzite structure and CdO in wurtzite and rock-salt structures. In addition several compositions with various ordered structures of Zn_xCd_1−xO alloys were studied within the theory of order–disorder transformation. The full potential linearized augmented plane wave method was used and the d orbitals of Zn and Cd were included in the valence bands. In this investigation of alloying ZnO with CdO, the fundamental band-gap of the alloys is shown to be direct and to decrease versus the Cd composition.     

Luminescence from Si-Si1−xGex/Si1−yCy-Si structures

Near band edge photoluminescence has been obtained from Si_1−yC_y quantum well (QW) and neighboring Si_1−xGe_x/Si_1−yC_y double QW (DQW) structures. Enhanced no-phonon recombination is observed from the DQW structures and it is attributed to a breaking of the k-selection rule in the presence of the heterointerface. The luminescence persists for measurement temperatures up to 30–50 K and the intensity exhibits a quenching behavior with an activation energy equal to 8–20 meV. In electroluminescence only recombination in the Si_1−xGe_x layer has been observed from neighboring Si_1−xGe_x and Si_1−yC_y DQW structures.     

Electronic structure of Ga1−xCrxN investigated by photoemission spectroscopy

We have obtained the Cr 3d-like energy states, which located in the band gap of GaN by means of resonant photoemission spectroscopy. In the difference spectrum between the valence band photoemission spectra of non-doped GaN and that of the Ga_0.937Cr_0.063N, we observed the new energy state, in band gap, consists of Cr 3d-like and N 2p-like component by strong hybridization.     

Determination of the g-factor of n-type HgTe/Hg1−xCdxTe single quantum wells

The effective g-factor of modulation doped n-type HgTe single quantum wells, SQWs, has been determined by the coincidence method in tilted magnetic fields to lie between 15 and 35. For symmetrically doped samples the effective g-factor has been found to be constant for different filling factors; however, for asymmetric SQWs, a large increase with increasing filling factor has been observed. This can be ascribed to a combination of Zeeman spin splitting and Rashba spin–orbit splitting. Reasonable agreement has been achieved between theoretical calculations based on the 8×8 k · p method and experimental results.     

Structural and optical properties of Ba(Ti1−x,Nix)O3 thin films prepared by sol–gel process

Ba(Ti_1−x,Ni_x)O₃ thin films were prepared on fused quartz substrates by a sol–gel process. X-ray diffraction and Raman scattering measurements showed that the films are of pseudo-cubic perovskite structure with random orientation and the change of lattice constant caused by Ni-doping with different concentrations is very small. Optical transmittance spectra indicated that Ni-doping has an obvious effect on the energy band structure. The energy gap of Ba(Ti_1−x,Ni_x)O₃ decreased linearly with the increase of Ni concentration. It indicates that the adjusting of band gap can be achieved by controlling the Ni-doping content accurately in Ba(Ti_1−x,Ni_x)O₃ thin films. This has potential application in devices based on ferroelectric thin films.     

应变Ge/Si1-xGex 价带色散模型

基于k·p微扰理论, 通过引入应变哈密顿量作为微扰, 建立了双轴应变Ge/Si_1-xGe_x价带色散关系模型. 模型适于任意晶向弛豫Si_1-xGe_x虚衬底上的应变Ge价带结构, 通过该模型可获得任意k方向应变Ge的价带结构和空穴有效质量. 模型的Matlab模拟结果显示, 应变Ge/Si_1-xGe_x价带带边空穴有效质量随Ge组分的增加而减小, 其各向异性比弛豫Ge更加显著. 本文研究成果对Si基应变Ge MOS器件及集成电路的沟道应力与晶向的设计有参考价值.     

Fractional-dimensional polaron corrections in asymmetric GaAs-Ga1−xAlxAs quantum wells

Polaron effects in asymmetric GaAs-Ga_1−xAl_xAs quantum wells (QWs) are investigated within the framework of the fractional-dimensional space approach and by using second-order perturbation theory. A well-width dependence of the polaron corrections with a dip and a peak is obtained for both symmetric and asymmetric QWs. The dip and the peak occur in the case of asymmetric QWs for larger well widths than in the case of symmetric QWs. An enhancement of the contrast between the dip and the peak of the polaron energy shift is found for the case of asymmetric QWs. These results show the convenience of using asymmetric QWs instead of symmetric ones in any experimental attempt of detecting the dip and the peak of the polaron energy shift.     

Energy band gaps for the GaxIn1−xAsyP1−y alloys lattice matched to different substrates

A pseudopotential formalism within the virtual crystal approximation in which the effects of composition disorder are involved is applied to the Ga_xIn_1−xAs_yP_1−y quaternary alloys in conditions of lattice matching to GaAs, InP and ZnSe substrates so as to predict their energy band gaps. Very good agreement is obtained between the calculated values and the available experimental data for the alloy lattice matched to InP and GaAs. The alloy is found to be a direct-gap semiconductor for all y compositions whatever the lattice matching to the substrates of interest. The (Γ→Γ) band-gap ranges and the ionicity character are found to depend considerably on the particular lattice-matched substrates suggesting therefore that, for an appropriate choice of y and the substrate, Ga_xIn_1−xAs_yP_1−y could provide more diverse opportunities to obtain desired band gaps, which opens up the possibility of discovering new electronic devices with special features and properties.     

Structural characteristics and morphology of SmxCe1−xO2−x/2 thin films

Effect of the deposition temperature (200 and 500 °C) and composition of Sm_xCe_1−xO_2−x/2 (x = 0, 10.9–15.9 mol%) thin films prepared by electron beam physical vapor deposition (EB-PVD) and Ar⁺ ion beam assisted deposition (IBAD) combined with EB-PVD on structural characteristics and morphology/microstructure was investigated. The X-ray photoelectron spectroscopy (XPS) of the surface and electron probe microanalysis (EPMA) of the bulk of the film revealed the dominant occurrence of Ce⁴⁺ oxidation state, suggesting the presence of CeO₂ phase, which was confirmed by X-ray diffraction (XRD). The Ce³⁺ oxidation states corresponding to Ce₂O₃ phase were in minority. The XRD and scanning electron microscopy (SEM) showed the polycrystalline columnar structure and a rooftop morphology of the surface. Effects of the preparation conditions (temperature, composition, IBAD) on the lattice parameter, grain size, perfection of the columnar growth and its impact on the surface morphology are analyzed and discussed.     

Global and local critical current density in superconducting SmFeAsO1−xFx measured by two methods

The critical current densities of polycrystalline bulk SmFeAsO_1−xF_x prepared by the powder-in-tube (PIT) method and by a conventional solid-state reaction were investigated using the remnant magnetic moment method and Campbell’s method. Two types of shielding current, corresponding to global and local critical current densities J_c were observed using both measurement methods. The global and local J_c were on the order of 10⁷ A/m² and 10¹⁰ A/m² at 5 K, respectively. The local J_c decreased slightly with increasing magnetic field. The global J_c was independent of the preparation method, while the local J_c was larger for samples prepared by PIT than for those prepared by solid-state reaction.     

Tuning of long-wavelength emission in InxGa1−xAs quantum dot structures

This work explores the conditions to obtain the extension of the PL emission beyond 1.3 μm in InGaAs quantum dot (QD) structures growth by MOCVD. We found that, by controlling the In incorporation in the barrier embedding the QDs, the wavelength emission can be continuously tuned from 1.25 μm up to 1.4 μm at room temperature. However, the increase in the overall strain of the structures limits the possibility to increase the maximum gain in the QD active device, where an optical density as high as possible is required. By exploring the kinetics of QD surface reconstruction during the GaAs overgrowth, we are able to obtain, for the first time, emission beyond 1.3 μm from InGaAs QDs grown on GaAs matrix. The wavelength is tuned from 1.26 μm up to 1.33 μm and significant improvements in terms of line shape narrowing and room temperature efficiency are obtained. The temperature-dependent quenching of the emission efficiency is reduced down to a factor of 3, the best value ever reported for QD structures emitting at 1.3 μm.     

Si1-xGex合金半导体中CiCs和CiOi缺陷随Ge含量的变化

采用从头计算(ab initio)的方法对Si和Si_1-xGe_x合金半导体材料中C_iC_s缺陷的性质进行探讨，同时也对比调查了C_iO_i缺陷在Si和Si_1-xGe_x合金中的性质. 在不同Ge含量的Si_1-xGe_{x相似文献}   

Si1-xGex合金半导体中CiCs和CiOi缺陷随Ge含量的变化

采用从头计算(ab initio)的方法对Si和Si_1-xGe_x合金半导体材料中C_iC_s缺陷的性质进行探讨,同时也对比调查了C_iO_i缺陷在Si和Si_1-xGe_x合金中的性质. 在不同Ge含量的Si_1-xGe_{x关键词： 1-x}Ge_x合金')" href="#">Si_1-xGe_x合金 从头计算法 iC_s缺陷')" href="#">C_iC_s缺陷 iO_i缺陷')" href="#">C_iO_i缺陷     

Bound polaron in a wurtzite GaN/AlxGa1 − xN ellipsoidal finite-potential quantum dot

A variational method is used to study the ground state of a bound polaron in a weakly oblate wurtzite GaN/Al_xGa_1 − xN ellipsoidal quantum dot. The binding energy of the bound polaron is calculated by taking the electron couples with both branches of LO-like and TO-like phonons due to the anisotropic effect into account. The interaction between impurity and phonons has also been considered to obtain the binding energy of a bound polaron. The results show that the binding energy of bound polaron reaches a peak value as the quantum dot radius increases and then diminishes for the finite potential well. We found that the binding energy of bound polaron is reduced by the phonons effect on the impurity states, the contribution of LO-like phonon to the binding energy is dominant, the anisotropic angle and ellipticity influence on the binding energy are small.