Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti-Biofouling

Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) „peptoids“ are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne–azide „click“ coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a „volumetric“ spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.     

Direct UV‐Induced Functionalization of Surface Hydroxy Groups by Thiol–Ol Chemistry

A novel UV‐initiated surface modification method for the direct functionalization of surface hydroxy groups with thiol‐containing molecules (termed “thiol–ol” modification) is described. This method is based on the oxidative conjugation of thiols to hydroxy groups. We demonstrate that different thiol‐containing molecules, such as fluorophores, thiol‐terminated poly(ethylene glycol) (PEG‐SH), and a cysteine‐containing peptide, can be attached onto the surface of porous poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate). Direct functionalization of other hydroxy‐group‐bearing surfaces, fabrication of micropatterns, and double patterning have been also demonstrated using the thiol–ol method.     

Synthesis of degradable functional poly(ethylene glycol) analogs as versatile drug delivery carriers

Poly(ethylene glycol) (PEG) is widely used as a water soluble carrier for polymer-drug conjugates. Herein, we report degradable linear PEG analogs (DPEGs) carrying multifunctional groups. The DPEGs were synthesized by a Michael addition based condensation polymerization of dithiols and PEG diacrylates (PEGDA) or dimethacrylates (PEGDMA). They were stable at pH 7.4 but quickly degraded at pH 6.0 and 5.0. Thus, DPEGs could be used as drug carriers without concern for their retention in the body. DPEGs could be made to carry such functional groups as terminal thiol or (meth)acrylate and pendant hydroxyl groups. The functional groups were used for conjugation of drugs and targeting groups. This new type of PEG analog will be useful for drug delivery and the PEGylation of biomolecules and colloidal particles.     

Dendron–polymer conjugates via the diels–alder “click” reaction of novel anthracene‐based dendrons

Diblock and triblock dendron–polymer conjugates containing biodegradable polyester dendron blocks and polyethylene glycol (PEG) polymer were synthesized using the Diels–Alder “click” cycloaddition reaction. PEG polymers with furan‐protected maleimide functionality were synthesized and reacted with biodegradable polyester dendrons containing an anthracene moiety at their focal point. First through third generations of biodegradable polyester dendrons containing an anthracene unit at their focal point were synthesized using a divergent strategy. Efficient conjugation of the dendrons to polymers was demonstrated using ¹HNMR and size exclusion chromatography. This modular approach provides an easy access to the design of multivalent PEG conjugates. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3191–3201     

Improving the Stability of Maleimide–Thiol Conjugation for Drug Targeting

Maleimides are essential compounds for drug conjugation reactions via thiols to antibodies, peptides and other targeting units. However, one main drawback is the occurrence of thiol exchange reactions with, for example, glutathione resulting in loss of the targeting ability. A new strategy to overcome such retro-Michael exchange processes of maleimide–thiol conjugates by stabilization of the thiosuccinimide via a transcyclization reaction is presented. This reaction enables the straightforward synthesis of stable maleimide–thiol adducts essential in drug-conjugation applications.     

Synthesis and functionalization of dendron‐polymer conjugate based hydrogels via sequential thiol‐ene “click” reactions

Fabrication and functionalization of hydrogels from well‐defined dendron‐polymer‐dendron conjugates is accomplished using sequential radical thiol‐ene “click” reactions. The dendron‐polymer conjugates were synthesized using an azide‐alkyne “click” reaction of alkene‐containing polyester dendrons bearing an alkyne group at their focal point with linear poly(ethylene glycol)‐bisazides. Thiol‐ene “click” reaction was used for crosslinking these alkene functionalized dendron‐polymer conjugates using a tetrathiol‐based crosslinker to provide clear and transparent hydrogels. Hydrogels with residual alkene groups at crosslinking sites were obtained by tuning the alkene‐thiol stoichiometry. The residual alkene groups allow efficient postfunctionalization of these hydrogel matrices with thiol‐containing molecules via a subsequent radical thiol‐ene reaction. The photochemical nature of radical thiol‐ene reaction was exploited to fabricate micropatterned hydrogels. Tunability of functionalization of these hydrogels, by varying dendron generation and polymer chain length was demonstrated by conjugation of a thiol‐containing fluorescent dye. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 926–934     

Loss of PEG chain in routine SDS‐PAGE analysis of PEG‐maleimide modified protein

SDS‐PAGE represents a quick and simple method for qualitative and quantitative analysis of protein and protein‐containing conjugates, mostly pegylated proteins. PEG‐maleimide (MAL) is frequently used to site‐specifically pegylate therapeutic proteins via free cysteine residue by forming a thiosuccinimide structure for pursuing homogeneous products. The C–S linkage between protein and PEG‐MAL is generally thought to be relatively stable. However, loss of intact PEG chain in routine SDS‐PAGE analysis of PEG‐maleimide modified protein was observed. It is a thiol‐independent thioether cleavage and the shedding of PEG chain exclusively happens to PEG‐MAL modified conjugates although PEG‐vinylsulfone conjugates to thiol‐containing proteins also through a C–S linkage. Cleavage kinetics of PEG40k‐MAL modified ciliary neurotrophic factor showed this kind of degradation could immediately happen even in 1 min incubation at high temperature and could be detected at physiological temperature and pH, although the rate was relatively slow. This may provide another degradation route for maleimide‐thiol conjugate irrespective of reactive thiol, although the specific mechanism is still not very clear for us. It would also offer a basis for accurate characterization of PEG‐MAL modified protein/peptide by SDS‐PAGE analysis.     

Stable and Rapid Thiol Bioconjugation by Light‐Triggered Thiomaleimide Ring Hydrolysis

Maleimide‐mediated thiol‐specific derivatization of biomolecules is one of the most efficacious bioconjugation approaches currently available. Alarmingly, however, recent work demonstrates that the resulting thiomaleimide conjugates are susceptible to breakdown via thiol exchange reactions. Herein, we report a new class of maleimides, namely o ‐CH₂NHⁱ Pr phenyl maleimides, that undergo unprecedentedly rapid ring hydrolysis after thiol conjugation to form stable thiol exchange‐resistant conjugates. Furthermore, we overcome the problem of low shelf lives of maleimide reagents owing to their propensity to undergo ring hydrolysis prior to bioconjugation by developing a photocaged version of this scaffold that resists ring hydrolysis. UV irradiation of thiol bioconjugates formed with this photocaged maleimide unleashes rapid thiomaleimide ring hydrolysis to yield the desired stable conjugates within 1 h under gentle, ice‐cold conditions.     

Preparation of ABC miktoarm star terpolymer containing poly(ethylene glycol), polystyrene,and poly(tert‐butylacrylate) arms by combining diels–alder reaction,atom transfer radical,and stable free radical polymerization routes

The ABC type miktoarm star terpolymer was prepared utilizing “core‐in” and “core‐out” methods via combination of Diels–Alder reaction (DA), stable free radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, in DA reaction, poly(ethylene glycol)‐maleimide (PEG‐maleimide) precursor was reacted with succinic acid anthracen‐9‐ylmethyl ester 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxy‐carbonyl]‐propyl ester, 8 , to give DA adduct, 9 , which has appropriate functional groups for SFRP and ATRP. Second, a previously obtained 9 was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PEG‐polystyrene (PEG‐PSt) precursor with a bromine functionality in the core was employed as a macroinitiator for ATRP of tert‐butylacrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C to give ABC type miktoarm star terpolymer (PEG‐PSt‐PtBA) with controlled molecular weight and low polydispersity (M_w/M_n < 1.27). The obtained polymers were characterized by gel permeation chromatography and ¹H NMR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 499–509, 2006     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

A new strategy for synthesis of “umbrella‐like” poly(ethylene glycol) with monofunctional end group for bioconjugation

A novel strategy was used to synthesize poly(ethylene glycol) (PEG) with “umbrella‐like” structure containing a single reactive group at the “handle” of the “umbrella”. 1‐(Bis(2‐hydroxyethyl)amino)‐3‐(1‐ethoxyethoxy)propan‐2‐ol was used to initiate the ring‐opening polymerization (ROP) of ethylene oxide (EO) in the presence of diphenylmethylpotassium (DPMK) to obtain three‐arm PEG (PEG3), then terminated by benzyl bromide or ethyl bromide. The resultant PEG3 was hydrolyzed to generate hydroxyl group at the conjunction point, and the second step ROP of EO was carried out using PEG3‐OH as macroinitiator in the presence of DPMK. The obtained four‐arm PEG (PEG4) contained a functional hydroxyl group at the end of the fourth arm, which could be easily modified to bioactive groups such as carboxyl, active ester, amino, etc. The well‐defined structure of “umbrella‐like” PEG was characterized by GPC, ¹H NMR, and MALDI‐TOF MS in detail. Propionic acid succinimidyl ester of PEG4 (10 kDa) was utilized for protein conjugation with interferon α‐2b. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Orthogonal Surface Tags for Whole‐Cell Biocatalysis

We herein describe the engineering of E. coli strains that display orthogonal tags for immobilization on their surface and overexpress a functional heterologous “protein content” in their cytosol at the same time. Using the outer membrane protein Lpp‐ompA, cell‐surface display of the streptavidin‐binding peptide, the SpyTag/SpyCatcher system, or a HaloTag variant allowed us to generate bacterial strains that can selectively bind to solid substrates, as demonstrated with magnetic microbeads. The simultaneous cytosolic expression of functional content was demonstrated for fluorescent proteins or stereoselective ketoreductase enzymes. The latter strains gave high selectivities for specific immobilization onto complementary surfaces and also in the whole‐cell stereospecific transformation of a prochiral C_S‐symmetric nitrodiketone.     

Antimicrobial peptide modification of biomaterials using supramolecular additives

Biomaterials based on non‐active polymers functionalized with antimicrobial agents by covalent modification or mixing are currently regarded as high potential solutions to prevent biomaterial associated infections that are major causes of biomedical device failure. Herewith a strategy is proposed in which antimicrobial materials are prepared by simply mixing‐and‐matching of ureido‐pyrimidinone (UPy) based supramolecular polymers with antimicrobial peptides (AMPs) modified with the same UPy‐moiety. The N‐terminus of the AMPs was coupled in solution to an UPy‐carboxylic acid synthon resulting in formation of a new amidic bond. The UPy‐functionalization of the AMPs did not affect their secondary structure, as proved by circular dichroism spectroscopy. The antimicrobial activity of the UPy‐AMPs in solution was also retained. In addition, the incorporation of UPy‐AMPs into an UPy‐polymer was stable and the final material was biocompatible. The addition of 4 mol % of UPy‐AMPs in the UPy‐polymer material protected against colonization by Escherichia coli, and methicillin‐sensitive and ‐resistant strains of Staphylococcus aureus. This modular approach enables a stable but dynamic incorporation of the antimicrobial agents, allowing at the same time for the possibility to change the nature of the polymer, as well as the use of AMPs with different activity spectra. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1926–1934     

Nanosegregated polymeric domains on the surface of Fe3O4@SiO2 particles

Multifunctional, biocompatible, and brush‐grafted poly(ethylene glycol)/poly(ε‐caprolactone) (PEG/PCL) nanoparticles have been synthesized, characterized, and used as vehicles for transporting hydrophobic substances in water. For anchoring the polymer mixed brushes, we used magnetic‐silica particles of 40 nm diameter produced by the reverse microemulsion method. The surface of the silica particle was functionalized with biocompatible polymer brushes, which were synthesized by the combination of “grafting to” and “grafting from” techniques. PEG was immobilized on the particles surface, by “grafting to,” whereas PCL was growth by ROP using the “grafting from” approach. By varying the synthetic conditions, it was possible to control the amount of PCL anchored on the surface of the nanoparticles and consequently the PEG/PCL ratio, which is a vital parameter connected with the arrangement of the polymer brushes as well as the hydrophobic/hydrophilic balance of the particles. Thus, adjusting the PEG/PCL ratio, it was possible to obtain a system formed by PEG and PCL chains grafted on the particle's surface that collapsed in segregated domains depending on the solvent used. For instance, the nanoparticles are colloidally stable in water due to the PEG domains and at the same time are able to transport, entrapped within the PCL portion, highly water‐insoluble drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2966–2975     

Full‐Spectrum Photonic Pigments with Non‐iridescent Structural Colors through Colloidal Assembly

Structurally colored materials could potentially replace dyes and pigments in many applications, but it is challenging to fabricate structural colors that mimic the appearance of absorbing pigments. We demonstrate the microfluidic fabrication of “photonic pigments” consisting of microcapsules containing dense amorphous packings of core–shell colloidal particles. These microcapsules show non‐iridescent structural colors that are independent of viewing angle, a critical requirement for applications such as displays or coatings. We show that the design of the microcapsules facilitates the suppression of incoherent and multiple scattering, enabling the fabrication of photonic pigments with colors spanning the visible spectrum. Our findings should provide new insights into the design and synthesis of materials with structural colors.     

Combining Orthogonal Chain‐End Deprotections and Thiol–Maleimide Michael Coupling: Engineering Discrete Oligomers by an Iterative Growth Strategy

Orthogonal maleimide and thiol deprotections were combined with thiol–maleimide coupling to synthesize discrete oligomers/macromolecules on a gram scale with molecular weights up to 27.4 kDa (128mer, 7.9 g) using an iterative exponential growth strategy with a degree of polymerization (DP) of 2ⁿ −1. Using the same chemistry, a “readable” sequence‐defined oligomer and a discrete cyclic topology were also created. Furthermore, uniform dendrons were fabricated using sequential growth (DP=2ⁿ −1) or double exponential dendrimer growth approaches (DP=2 −1) with significantly accelerated growth rates. A versatile, efficient, and metal‐free method for construction of discrete oligomers with tailored structures and a high growth rate would greatly facilitate research into the structure–property relationships of sophisticated polymeric materials.     

Novel poly(ethylene glycol) monomers bearing diverse functional groups

Poly(ethylene glycol) (PEG) mono methacrylate ester (MAPEG) has been used, through a variety of reactions, to form several novel monomers, bearing both a polymerizable handle and various functional groups. These new compounds may be conjugated to biomolecules via amine, acid, or thiol moieties or they may form dendrimers via the epoxide. In addition, polymerization of these monomers may result in functionalized nanoparticles and microparticles or coatings, thus altering the acid‐base or electrochemical properties of surfaces and particles. Full synthetic considerations, including interesting intermediates, are reported. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Multiarm star polymers with a thermally cleavable core: A “grafting‐from” approach paves the way

Thermally cleavable multiarm star polymers containing thermo‐reversible furan–maleimide cycloadduct‐based core were synthesized using dendritic macroinitiators. Peripheries of dendritic macroinitiators were modified with bromine containing free radical initiators to obtain multiarm polymers by utilizing atom transfer radical polymerization (ATRP). Cleavage of thus obtained multiarm polymers was achieved via the retro Diels–Alder cycloreversion reaction of the furan–maleimide core at elevated temperatures. As an alternative approach, combination of multiarm polymers containing a furan and maleimide functional group at their core was attempted to realize that the steric bulk does not allow their formation. Hence the “grafting‐from” route using a thermally fragmentable trigger containing multiarm initiators provides a plausible methodology for fabrication of such thermally cleavable multiarm polymeric materials. Syntheses of dendritic initiators, formation of star polymers as well as their fragmentation were followed by proton nuclear magnetic resonance spectroscopy and size exclusion chromatography. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 885–893     

Photoinitiator-Free Photopolymerization of Silicon-Containing Maleimides Based on Electron-Donor-Acceptor Systems

Summary: Photocured coatings promise enhanced performance, higher productivity and an improved environmental impact on the favorable reduction or near elimination of volatile organic compounds. Increasing interest in the photocuring industry has been imposed on the “photoinitiator-free photopolymerization [PIFP]” system based on the electron-donor-acceptor [EDA] concept, which commonly employs a mixture of a vinyl ether monomer (donor) and an N-substituted maleimide or bismaleimide monomer (acceptor). The PIFP systems employing silicon-containing maleimides together with vinyl ether monomers were firstly investigated and their photoreactions resulted in quite fast curing comparable to the conventional acrylate- based photocurable systems.