Gas-liquid chromatographic method for the routine estimation of disopyramide in plasma or serum

A rapid, sensitive and specific gas-liquid chromatographic method is presented for the routine monitoring of plasma concentrations of the anti-arrhythmic compound, disopyramide. The procedure involves extraction of the drug from alkaline plasma into ether, purification of the extract and gas chromatographic analysis using OV-101 liquid phase and flame ionization detection. The results demonstrate the accuracy and reproducibility of the method. Contrary to a previous report, it has been shown that delay in separating plasma from erythrocytes does not affect the disopyramide level in plasma.     

A novel method for preparation of exfoliated UV-curable polymer/clay nanocomposites

The half adduct of isophorone diisocyanate and 2-hydroxyethyl acrylate (IPDI-HEA), as a reactive organic modifier, was used to functionalize Na-montmorillonite (Na-MMT) clay. Unlike the electronic interaction in the conventional cation-exchange method, the driving force for the organic modification came from the chemical reaction between IPDI-HEA and framework hydroxyl groups on the surface of clay. With high degree of organic modification (48%), the d-spacing of clay layer was greatly enlarged to 3.32 nm, and the clay became more organophilic. After in situ photopolymerization among the IPDI-HEA grafted MMT clay, monomers and oligomers, the exfoliated polymer/clay nanocomposites were obtained. X-ray diffraction and transmission electron microscopy were used to detect the structure and morphology of the clay dispersed in the polymer matrix. Compared with the pure polymer materials, the exfoliated polymer/clay nanocomposites exhibited enhancements in mechanical and thermal properties.     

A novel method for the preparation of extensively dealuminated faujasites

Open structure faujasites may be dealuminated with retention of crystallinity using phosgene (or similar reactants) provided the sample has been made ultrastable in a previous procedure.

---

( ) . .

     

A novel method for the preparation of alpha,alpha'-difluoroesters and acids using BrF3

Alkyl-, haloalkyl-, and ketoalkyl-2-ethoxycarbonyl-1,3-dithianes were easily made from the appropriate primary or secondary alkyl bromides, 1,3-dithiane, and ethyl chloroformate. They were reacted with BrF(3) to form the corresponding alpha,alpha-difluoro esters in 65-75% yield. Reaction conditions are very mild (1-2 min, 0 degrees C). The two sulfur atoms of the dithiane are essential for the reaction.     

A novel synthetic method for preparation of some folates

An improved method was developed for preparation of 5,6,7,8-tetrahydrofolic acid (THF) and calcium-5-methyltetrahydrofolate (5-MTHF-Ca) by reduction of folic acid using KBH₄ catalyzed by Pb(NO₃)₂. The yields of THF and 5-MTHF-Ca were 56.5 and 42.7 %, respectively. A convenient method for measurement of THF and 5-MTHF-Ca using liquid chromatography–mass spectrometry (LC–MS) was also established, enabling analysis of those folates within 10 min without application of gradient elution.     

A method for preparation of magnetizable cellulose and its application in radioimmunoassays for T3 and T 4 1

An easy adoptable technique has been developed to prepare magnetizable cellulose by the process of wet grinding of a mixture of iron oxide (magnetite) and cellulose in a stirred ball mill. Anti rabbit IgG was covalently coupled to this magnetizable cellulose. The immunosorbent thus prepared has been used in radioimmunoassays of T₃ and T₄ for the separation of bound and free antigens. The reliability of the above immunosorbent has been validated by studying assay parameters such as non-specific binding (NSB), maximum binding (B ₀), CV etc. The single step process of wet grinding adopted here not only firmly binds magnetite and cellulose physically, but also lowers the size of the resulting magnetizable cellulose. The conventional method of preparation involves the coprecipitation of cellulose dissolved in cuprammonium hydroxide solution along with iron oxide, followed by extensive grinding and sieving of the iron oxide impregnated cellulose.     

A novel one-step chemical method for preparation of copper nanofluids

This paper presents a novel one-step method for preparing of copper nanofluids by reducing CuSO(4).5H(2)O with NaH(2)PO(2).H(2)O in ethylene glycol under microwave irradiation. Nonagglomerated and stably suspended Cu nanofluids are obtained. The influences of CuSO(4) concentration, addition of NaH(2)PO(2), and microwave irradiation on the reaction rate and the properties of Cu nanofluids were investigated by transmission electron microscopy, infrared analysis, and sedimentation measurements. It is found to be a fast, efficient one-step chemical method to prepare Cu nanofluids.     

A novel method for preparation of imidazolium tetrafluoroborate ionic liquids

A new method for the preparation of substituted imidazolium tetrafluoroborate salt, some of which are known as versatile room temperature ionic liquids, is proposed. The new method based on N-methylation of imidazole provided tetrafluoroborate derivatives containing no counterions, with shorter time and lower cost than conventional ion-exchange method.     

A novel method for the preparation of Bi4Ti3O12 nanoparticles in w/o microemulsion

Nanometer-sized Bi₄Ti₃O₁₂ particles have been prepared by chemical reaction of bismuth nitrate pentahydrate, titanium sulfate and ammonia solution in a reverse microemulsion system consisting of water, OP (P-octyl polyethylene glycol phenylether, non-ionic surfactant), n-butanol (co-surfactant), and cyclohexane (oil). Precursor hydroxides precipitated in the droplets of water-in-oil (w/o) microemulsion were calcined at 800 °C for 4 h to form Bi₄Ti₃O₁₂ nanoparticles. The samples were investigated with X-ray diffraction (XRD), transmission electron microscopy (TEM), fourier transform infrared spectrophotometer (FT-IR) and ultraviolet visible spectrophotometer (UV–vis). It was found that the as-prepared Bi₄Ti₃O₁₂ nanoparticles had small particle sizes (35 nm), high crystallinity, narrow size distributions and strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

A novel method for the preparation of benzylidenecyclohexanes with high optical purity

The enantioselective reaction of the α-thio carbanion derived from 1-phenyl-1-(phenylthio)-1-(tributylstannyl)methane with 4-substituted cyclohexanones in the presence of bis(oxazoline)s gave the products as a diastereomeric mixture. Each diastereomer obtained had high optical purity. The reaction of the α-seleno carbanion derived from the bis(phenylseleno)acetal also showed high enantioselectivity. The stereospecific elimination of the isolated diastereomers on treatment with methanesulfonyl chloride and triethylamine afforded axially chiral benzylidenecyclohexanes with high enantioselectivities up to 99% ee.     

A novel sacrificial interlayer-based method for the preparation of silicon carbide membranes

A novel method is presented based on the use of sacrificial interlayers for the preparation of nanoporous silicon carbide membranes. It involves periodic and alternate coatings of polystyrene sacrificial interlayers and silicon carbide pre-ceramic layers on the top of slip-casted tubular silicon carbide supports. Membranes prepared by this technique exhibit single gas ideal separation factors of helium and hydrogen over argon in the ranges 176–465 and 101–258, respectively, with permeances that are typically two to three times higher than those of silicon carbide membranes prepared previously by the more conventional techniques. Mixed-gas experiments with the same membranes indicate separation factors as high as 117 for an equimolar H₂/CH₄ mixture. We speculate that the improved membrane characteristics are due to the sacrificial interlayers filling the pores in the underlying structure and preventing their blockage by the pre-ceramic polymer. The new method has good promise for application to the preparation of a variety of other inorganic microporous membranes.     

A novel method for the preparation of C18 ester-bonded RP-HPLC packings

Summary A novel procedure had been developed for the preparation of RP packings. A C₁₈ alkyl-chain was bound onto spherical silica (particle size d_p=5 μm, s=300 m²g⁻¹) with glycidoxypropyltrimethoxysilane as coupling agent. Elemental analysis, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) and chromatographic evaluation confirmed the bonding of the packings and their RP behavior.     

A novel preparation method of active materials for the lithium secondary battery

LiNi_0.8Co_0.2O₂ is a promising candidate to replace LiCoO₂. The present paper describes the preparation of LiNi_0.8Co_0.2O₂ compounds from nitrate sources and sucrose (or sugar) by the sucrose combustion process (SCP), which involves application of a conventional combustion method. In the proposed approach, sucrose serves as a fuel, a dispersing agent, and a precipitation suppressant. Precursors were made via a combustion reaction, and LiNi_0.8Co_0.2O₂ was subsequently synthesized by heat treatment at 800 °C for 16 h in oxygen atmosphere. The initial discharge capacity was 175 mA h/g when a cell was operated at 2.7–4.3 V at 0.5 C-rate. Furthermore, it shows good cycling stability. When increased amount of sucrose were added as a start material, the final calcined powder displayed smaller particle size and better discharge capacity. It is expected that optimization of the heat treatment conditions would yield LiNi_0.8Co_0.2O₂ with excellent properties. Furthermore, SCP is expected to be applicable to the production of various materials.     

A novel method for (Z)-stereoselective preparation of CF3-substituted enediynes and their coupling reactions

Trifluoromethylated enynyl sulfones 3 were reacted with 2-4 equiv of phenyl, n-hexyl, trimethylsilyl, or triisopropylsilyl substituted ethynyllithium reagents in THF or ether at 0 °C to give trifluoromethylated enediynes 6 (Z)-stereoselectively in 41-96% yields. The reactions of β-fluoro-β-trifluoromethylvinyl sulfone 5 with same ethynyllithium reagents (4 equiv) afforded the corresponding enediynes 6 in 41-90% yields. The cross-coupling reactions of 6 bearing TMS group with aryl iodides in the presence of Pd(PPh₃)₂Cl₂, Ag₂CO₃, and n-Bu₄NBr provided the corresponding enediynes 6 in 20-71% yields. Dimerization of (Z)-6 bearing TMS group in the presence of CuBr₂ and K₂CO₃ yielded dimer (Z,Z)-7 in good yield.     

A general method for the preparation of N-monosubstituted-3-isothiazolamines

We describe here a novel and general high yield method for the synthesis of 3-alkyl and arylaminoisothiazoles, a previously unknown group of isothiazoles, by the reaction of ammonia with 3-halo-2-alkylisothiazolium salts. The mechanism of the reaction probably involves a ring opening followed by a recyclization to the title compounds.     

Sample preparation for serum/plasma profiling and biomarker identification by mass spectrometry

In this article, we present an overview of the different strategies for sample preparation for identification by mass spectrometry (MS) of biomarkers from serum and/or plasma. We consider the effects of the variables involved in sample collection, handling and storage, and describe different approaches for removal of high abundance proteins and serum/plasma fractionation. We review the advantages and disadvantages of such techniques as centrifugal ultrafiltration, different formats for solid phase extraction, organic solvent extraction, gel and capillary electrophoresis, and liquid chromatography. We also discuss a variety of current proteomic methods and their main applications for biomarker-related studies.     

A novel method for the preparation of nucleoside triphosphates from activated nucleoside phosphoramidates

[reaction: see text] A novel method for the preparation of nucleoside triphosphates has been developed. The strategy employs a highly reactive pyrrolidinium phosphoramidate zwitterion intermediate that undergoes efficient coupling with tris(tetra-n-butylammonium) hydrogen pyrophosphate to generate nucleoside triphosphate.