Towards an understanding of solvent extraction – electroanalytical characterization of chloride-leaching solutions

Solvent extraction has been employed to purify media simulating chloride-leaching solutions resulting from complex sulfide concentrate processing, and cyclic voltammetry (CV) has been chosen to characterize those hydrometallurgical aqueous phases. The possibilities of the CV technique were investigated by the evaluation of the adequacy of a specific organic extractant, triisobutylphosphine sulfide, aimed to efficiently and selectively extract silver from a complex chloride medium, additionally containing tenfold to 40-fold molar concentrations of iron, copper and lead. The influence of the oxidation state of the metallic ions present in the feed solution, namely Cu(II) and Cu(I), is considered. The possibilities of CV analysis for the characterization of stripping solutions are also illustrated.     

Development of a heterobimetallic Ru(II)-Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions

A heterobimetallic ruthenium(II)-copper(II) complex-based luminescent chemosensor, [Ru(bpy)(2)(bpy-DPA)Cu](4+) (bpy: 2,2'-bipyridine; bpy-DAP: 4-methyl-4'-[N,N-bis(2-picolyl)amino-methylene]-2,2'-bipydine), has been designed and synthesized for the highly selective and sensitive recognition and detection of sulfide anions in 100% aqueous solutions. Owing to the high affinity of sulfide to Cu(II), the non-luminescent chemosensor can specifically and rapidly react with sulfide to yield the corresponding ruthenium(II) complex, [Ru(bpy)(2)(bpy-DPA)](2+), accompanied by the remarkable luminescence enhancement. The dose-dependent luminescence enhancement of the sensor shows a good linearity with a detection limit of 20.7 nM for sulfide anions. The novel luminescence sensor has a widely available pH range from 4.5 to 10 and an excellent response selectivity to sulfide only even in the presence of various other anions. Based on this chemosensor, a rapid, selective and sensitive luminescence method for the detection of sulfide anions in wastewater samples was established. The coefficient variations (CVs) of the method are less than 3.1%, and the recoveries are in the range of 90.9-108.5%.     

Effect of the type of crystal lattice in nickel(II) and copper(II) macrocyclic carboxylates on absorption of copper amine complexes from solutions

We have established that crystalline nickel-containing metal–organic frameworks (MOFs) bind the complex [Cu(NH₃)₄](ClO₄)₂ from acetonitrile solutions and do not react with [Cu(en)₂](ClO₄)₂. The MOF/copper ammine complex ratio in the products after reaching saturation is determined by the crystal lattice structures of the compounds, and increases from 1.2 (one-dimensional coordination polymer, 1D CP) to 3.2 (2D CP)and 3.9 (ionic MOF) moles of copper ammine complex per formula unit of sorbent. We have shown that it is possible to convert the bound ammine complex to nanosized copper(II) sulfide by treatment with sodium sulfide.     

Electrochemical Investigation of Metal Oxide Conducting Electrodes for Direct Detection of Sulfide

This study examined the performance of four conducting metal oxide electrodes for the direct electrochemical analysis of sulfide; the electrode materials studied were indium tin oxide (ITO), fluorine doped tin oxide (FTO), aluminum doped zinc oxide (AZO) and gallium doped zinc oxide (GZO). Cyclic voltammetry (CV) results obtained using the ITO, AZO, GZO and FTO electrodes showed direct electrooxidation peak potential of sulfide at 381, 507, 400, and 850 mV vs. Ag/AgCl, respectively; however, the less positive oxidation potential and high catalytic current response of the ITO electrode made it the electrode of choice for the direct oxidation of sulfide. The effects of different electrolytes and buffer solutions on the CV responses were also evaluated. A linear concentration range up to 350 µM and a detection limit of 8.0 µM were achieved. CV response was highly reproducible, remaining unaffected even after 50 measurements. The sensor was found to have good selectivity, with no interference from sulfite, sulfate or chloride ions. The present findings demonstrate that the bare ITO electrode can be used as the basis of an inexpensive, sensitive, selective and robust sulfide sensor.     

Functional monomers and polymers. LIX. Properties and function of Cu(II) complexes of the copolymers having pendant sulfide and imidazolyl groups

The Cu(II) complexes of copolymers having pendant sulfide and imidazolyl groups were prepared by a free radical copolymerization of ethylvinylsulfide with vinylimidazole, and their properties and function were studied spectrophotometrically in comparison with those of poly[4(5)-vinylimidazole]. The complexes were found to be effective as catalysts for the oxidation of hydroquinone. Visible and ESR spectra of the Cu(II)-copolymer complexes were similar to those of the Cu(II)-homopolymer complexes, while the catalytic activity for the oxidation was different between these complex systems. A rapid reaction followed by a slow reaction, particularly at high ethylvinylsulfide content in the copolymers, was observed in the Cu(II)-copolymer complex systems, but a continuous reaction proportional to the reaction time was observed in the Cu(II)-homopolymer complex systems. The reoxidation rate of Cu(I) to Cu(II) complex, which was little affected by the concentration of imidazolyl group, decreased with a rise of the ethylvinylsulfide content in the copolymer. It was suggested that the sulfur atom of the sulfide group was weakly coordinated to Cu(II) but strongly to Cu(I), and an electron transfer reaction from substrate to the Cu(II) complex was increased, while reoxidation reaction of the Cu(I) complex was decreased in the copolymer complex systems.     

Redox induced reversible structural transformations of dimeric and polymeric phenanthroline-based copper chelates

The synthesis and characterization of copper complexes of the phenanthroline based bridging ligands, 9-methyl-2-(2-[4-[2-(9-methyl-1,10-phenanthrolin-2-yl)ethyl]phenyl]ethyl)-1,10-phenanthroline, 1, and 1,12-bis(9-methyl-1,10-phenanthroline-2-yl)dodecane, 2, are presented. Whereas in the first case a discrete dimeric complex [Cu(2)(1)(2)](BF(4))(2) was formed, in the latter, a coordination polymer [2(Cu(2))(n)](BF(4))(n) resulted. Both of these materials have been characterized by cyclic voltammetry (CV), the electrochemical quartz crystal microbalance (EQCM), and UV-vis spectroscopy and the results compared to those of the monomeric [Cu(dmp)(2)](BF(4)) (dmp is 2,9-dimethyl-1,10-phenanthroline) species. Oxidation of the dimeric species results in its precipitation and reduction results in stripping of the deposited layer as ascertained from CV and EQCM measurements. The electrooxidation of the copper centers in the coordination polymer results in changes in the coordination which are fully reversible upon reduction. The dissociation/regeneration of the coordination polymer as a function of the redox state of the copper centers has been characterized by CV, EQCM, and UV-vis spectroelectrochemistry.     

Study of copper sulfide crystallization in PEO-SDS solutions

The crystallization of copper sulfide in aqueous supersaturated solutions in the presence of the polymer poly(ethylene oxide), PEO, and the surfactant sodium dodecyl sulfate, SDS, was investigated. In these systems, copper sulfide precipitation competes with the reaction between copper cations and dodecyl sulfate anions. The competition of the two reactions may affect the reaction products significantly; therefore it is important to study the properties of the surfactant salt, copper dodecyl sulfate (Cu(DS)2), in detail. The thermodynamic solubility constant of Cu(DS)2 was measured at 8 degrees C and was equal to (2.4 +/- 0.4) x 10(-10) M3. The Krafft point of Cu(DS)2 and its solubility curve (precipitation temperature for a range of concentrations) were also measured. The latter was found to be very close to room temperature. Temperature is thus a very significant parameter in these systems and must be carefully controlled in all experiments. The crystallization of copper sulfide in PEO-SDS solutions was investigated in solutions with compositions above and below the solubility curve. Copper sulfide nanoparticles predominate and are stabilized at temperatures above the solubility curve. Surprisingly, at temperatures below the solubility curve CuxS coexists with Cu(DS)2, which appears in the form of lamellar crystals. The system is further complicated by the presence of at least two different types of copper sulfides corresponding to different oxidation states of copper. Our results suggest that the predominance of Cu(DS)2 at lower temperatures is due to its limited solubility and is modified by the CuI/CuII redox equilibrium in combination with the solution pH.     

A retrievable and highly selective fluorescent probe for monitoring sulfide and imaging in living cells

A novel selective fluorescent chemosensor based on an 8-hydroxyquinoline-appended fluorescein derivative (L1) was synthesized and characterized. Once combined with Cu(2+), it displayed high specificity for sulfide anion. Among the various anions, only sulfide anion induced the revival of fluoresecence of L1, which was quenched by Cu(2+), resulting in "off-on"-type sensing of sulfide anion. What's more, the sensor was retrievable to indicate sulfide anions with Cu(2+), and S(2-), in turn, increased. With the addition of Cu(2+), compound L1 could give rise to a visible pink-to-yellow color change and green fluorescence quenching. The resulting yellow solution could change to pink and regenerate to green fluorescence immediately upon the addition of sulfide anion; however, no changes were observed in the presence of other anions, including CN(-), P(2)O(7)(4-), and other forms of sulfate, making compound L1 an extremely selective and efficient sulfide chemosensor. The signal transduction occurs via reversible formation-separation of complex L1Cu and CuS. What's more, the biological imaging study has demonstrated that the chemosensor can detect sulfur anions in biological systems at a relatively low concentration.     

Spectroscopic and electrochemical studies of hetero-bimetallic copper complexes with Schiff's base ligand

Using Schiff's base ligand, several Cu(II) based bimetallic complexes such as Cu-Cu, Cu-Co, Cu-Ni, Cu-Zn, Cu-Mn have been prepared in a stepwise procedure. The structures of these complexes and the ligand have been proposed on the basis of FAB mass, elemental analysis, UV-vis, IR, electron paramagnetic resonance (EPR) and CV studies. EPR parameters, obtained through complete simulation, suggest that the formation of bimetallic complexes forces the Cu(II) centre to increase the flexibility in comparison with the monometallic Cu(II) complex. However, the nature of the second metal ion in the bimetallic complex effects the distortion around the first metal ion. The reduction of the complexes from Cu(II) to Cu(I) involves a large geometrical change and is found to be irreversible. A large positive shift is seen in the cathodic process, which can be ascribed to increased distortion due to bimetallic coordination. These complexes have potential usage in DNA studies.     

Spontaneous attachment of amines to carbon and metallic surfaces

Primary alkylamines attach spontaneously from acetonitrile (ACN) solutions onto glassy carbon and metallic surfaces (Au, Pt, Cu, and Fe). The surface concentration of the organic layer measured from the integration of cyclic voltammograms appears close to or lower than that of a compact monolayer. The rate of the attachment depends on the concentration of the primary amino compound; it reaches a maximum after 3 h of immersion for the most concentrated solutions (20 mM). The modified surfaces have been characterized by cyclic voltammetry (CV), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (ATR). The possible reaction mechanisms are discussed.     

Investigation of a Cu(II)-poly(gamma-glutamic acid) complex in aqueous solution and its insulin-mimetic activity

The complexation between cupric ions (Cu(II)) and poly(gamma-glutamic acid) (gamma-PGA) in aqueous solutions (pH 3-11) has been studied by UV-visible absorption and electron spin resonance (ESR) techniques. Formation of the Cu(II)-gamma-PGA complex is confirmed by the observation of the blue shift of the absorption band in the visible region, anisotropic line shapes in the ESR spectrum at room temperature, and a computer simulation of the visible absorption spectrum of the complex. The structure of the Cu(II)-gamma-PGA complex, depending on the pH, has been determined. The in vitro insulin-mimetic activity of the Cu(II)-gamma-PGA complex is examined by determining both inhibition of free fatty acid release and glucose uptake in isolated rat adipocytes treated with epinephrine, in which the concentration of the Cu(II)-gamma-PGA complex for 50% inhibition of free fatty acid release is very similar to that of CuSO4. However, it is significantly lower than that of a previously reported insulin-mimetic bis(3-hydroxypicolinato)copper(II), [Cu(3hpic)2], complex.     

Ion-pair liquid-solid extraction for the preconcentration of trace metal ions Optimization of experimental conditions

Cu(II) has been recovered from dilute solutions (0.1 mug/ml) by adsorbing the ion-pairs formed between different quaternary ammonium salts and the Cu-8-hydroxyquinoline-5-sulphonic acid complex on adsorbent resins, namely XAD 8 and S 862. Both batch and column techniques have been used, the first of which gave superior recovery and precision. It has also been shown that XAD 8 resin can be transformed into an ion-exchanger suitable for preconcentration of Cu(II). The results obtained have been compared with those of reversed-phase ion-pair chromatography and a model is proposed.     

Synthesis,structure and electrochemical behavior of an organic-inorganic hybrid compound based on Dawson-type polyoxometalates

An organic-inorganic hybrid compound constructed from Wells-Dawson polyanion clusters and metal-organic complex subunits, [Cu(phen)₃][Cu(phen)₂Cu(phen)₂(P₂W₁₈O₆₂)]·2H₂O (1) has been prepared hydrothermally and characterized by elemental analysis, IR, UV, cyclic voltammetry (CV) and single-crystal X-ray diffraction. Crystal structural analysis indicates that two terminal oxygen atoms of the Wells-Dawson polyanion located in the “belt” site coordinate with Cu²⁺. Three Cu ions have different coordination environments: Cu1 and Cu2 are five-coordinate, while Cu3 is six-coordinate. The bisupporting polyoxoanions [Cu(phen)₂Cu(phen)₂(P₂W₁₈O₆₂)]^2? are polymerized into a 1D chain by hydrogen bonding interactions, then the chains are stacked into a two-dimensional structure via offset, face-to-face, π ··· π stacking interactions. CV reveals that 1 exhibits three chemically-reversible processes.     

Novel copper(II)-dien-imidazole/imidazolate-bridged copper(II) complexes. Crystal structure of [Cu(dien)(Him)](ClO4)2 and of [(dien)Cu(mu-im)Cu(dien)](ClO4)3, a homobinuclear model for the copper(II) site of the CuZn-superoxide dismutase

The imidazolate-bridged binuclear copper(II)-copper(II) complex [(dien)Cu(mu-im)Cu(dien)](ClO(4))(3) and related mononuclear complexes [Cu(dien)(H(2)O)](ClO(4))(2), [Cu(dien)(Him)](ClO(4))(2) were synthesized with diethylenetriamine (dien) as capping ligand. The crystal structure of mononuclear [Cu(dien)(Him)](ClO(4))(2) and binuclear complex [(dien)Cu(mu-im)Cu(dien)](ClO(4))(3) have been determined by single crystal X-ray diffraction methods. The mononuclear complex [Cu(dien)(Him)](ClO(4))(2) crystallizes in the orthorhombic, Pca2(1) with a = 9.3420(9) A, b = 12.3750(9) A, c = 14.0830(9) A, beta = 90.000(7)(o) and Z = 4 and binuclear complex [(dien)Cu(mu-im)Cu(dien)](ClO(4))(3) crystallizes in the monoclinic space group P2(1)/a, with a = 15.017(7) A, b = 11.938(6) A, c = 15.386(6) A, beta = 110.30(4)(o) and Z = 4. The molecular structures show that copper(II) ions in an asymmetrically elongated octahedral coordination (type 4 + 1 + 1) and in binuclear complex Cu(1) atom has a asymmetrically elongated octahedral coordination (type type 4 + 1 + 1) and Cu(2) atom exhibits a square base pyramidal coordination (type 4 + 1). The bridging ligand (imidazolate ion, im) lies nearly on a straight line between two Cu(2+), which are separated by 5.812 A, slightly shorter than the value in copper-copper superoxide dismutase (Cu(2)-Cu(2)SOD). Magnetic measurements and electron spin resonance (ESR) spectroscopy of the binuclear complex have shown an antiferromagnetic exchange interaction. From pH-dependent cyclic voltametry (CV) and electronic spectroscopic studies the complex has been found to be stable over a wide pH range (7.75-12.50).     

CO32-对羟基乙叉二膦酸体系铜电结晶的影响

采用循环伏安和计时安培法研究了羟基乙叉二膦酸(HEDPA)镀铜液中铜在玻碳电极上电结晶的初期行为。结果表明：羟基乙叉二膦酸(HEDPA)镀铜体系中,铜的电沉积过程经历了晶核形成过程;当溶液中不含CO32-时,其电结晶按连续三维成核方式进行,而CO32-的加入,使得铜电结晶按瞬时三维成核方式进行;成核数密度都随着电位的提高而增加。这可能是CO32- -以第二配体形式进入HEDPA和Cu2+构成的络合结构,从而形成更稳定的络合物吸附在电极表面所致。     

含ONN席夫碱和2,2'-联吡啶的铜三元配合物的合成、晶体结构及电化学性质

合成了一个新颖的含ONN席夫碱配体N-水杨醛基-2-氨乙基苯并咪唑(HL),并在甲醇体系中合成了它的配合物ICu(L)(bipy)]ClO4(bipy为2,2'-联吡啶).利用X-射线单晶衍射法测定了配合物的晶体结构.配合物[Cu(L)(bipy)lClO4的晶体属于单斜晶系,C2/c空间群,a=2.585 5(8)nm,b=1.4355(5)nm,c=1.6242(5)nm,β=124.434(5)°,Z=8.在配合[Cu(L)(bipy)lClO4中,每个铜离子的配位数为5,分别和配体L的1个氧原子和2个氮原子及2,2'-联吡啶的2个氮原子配位,形成畸变的三角双锥配位环境.配合物[Cu(L)(bipy)]ClO4巾的氧键和π-π相互作用将配合物[Cu(L)(bipy)]ClO4连接成二维网络结构.用红外光谱、紫外-可见光谱对配合[Cu(L)(bipy)]ClO4进行了表征,并用循环伏安法对配合物进行了电化学性质的研究.     

六边形非化学计量比CuxS纳米片：合成、表征及电化学性质

分别采用乙二醇(EG)和聚乙烯吡咯烷酮(PVP)为溶剂和模板剂,用简单的回流方法合成六角型非化学计量比CuxS纳米片.并用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见近红外光谱仪(UV-Vis)、循环伏安法(CV)对产物进行表征.TEM研究表明样品形貌为纳米六角片.XRD结果表明,随着Cu/S物质的量比的逐渐增加,样品物相从靛铜矿(covellite)CuS逐渐转变为蓝辉铜矿(digenite)Cu1.8S.此外,随着样品组分的变化,其光学和电化学性质均发生显著变化.     

烟酸和1,10-邻菲啰啉构建的Cu(Ⅱ)配合物与DNA的相互作用

采用光谱法、循环伏安法和热变性方法,研究了烟酸(NA)和1,10-邻菲啰啉(Phen)构建的三元Cu(Ⅱ)配合物([Cu(Phen)(NA)]·H2O)与鲱鱼精DNA的相互作用。结果显示:NA中羧酸根离子与Phen中两个氮原子均与Cu(Ⅱ)双齿配位,形成的配合物在0.141~0.205V出现一对灵敏的氧化还原峰,并且配合物在玻碳电极上的反应主要由扩散过程控制。加入DNA后配合物的最大吸收峰发生了明显红移和减色,且配合物的氧化还原峰电流显著降低,式量电位发生正移;配合物能猝灭中性红(NR)-DNA体系的荧光,同时配合物的加入使DNA熔点升高,表明配合物与DNA存在嵌入结合。     

The extraction of various metals as their anionic complexes with edta by solutions of aliquat-336 chloride in 1.2-dichloroethane

The extraction of anionic complexes of EDTA with Ca. Mg, V(IV), V(V), Cr(III), Mn(II), Mn(III), Fe(III), Co(II), Co(III), Ni, Cu(II), Zn, Cd, Hg(II), Pd(II), Pb and Bi by solutions of Aliquat-336 chloride in 1,2-dichloroethane has been studied as a function of the pH of the aqueous phase. The order and extent of the extractability varies greatly with the pH and provides a number of new possibilities for separation procedures. Thus iron(III) can be separated from many other metals in strongly alkaline solution while the extraction of V(V), V(IV), Hg(II) and Pd(II) exceeds 99% over wide pH ranges. The complex of Mn(III) with EDTA which is very unstable in aqueous solution can be preserved for up to 5 h when extracted by Aliquat-336.One of us (R. H. A1-J.) wishes to thank the Ministry of Oil of the Republic of Iraq for financial support.     

Synthesis and Crystal Structure of 2D Coordination Polymer {[Cu(dps)2(DMSO)2](ClO4)2}n Based on 4,4′-Dipyridyl Sulfide

A new coordination polymer {[Cu(dps)₂(DMSO)₂](ClO₄)2}_n has been synthesized basing on 4,4′- dipyridyl sulfide. The structure of the obtained complex has been studied by single-crystal X-ray diffraction analysis.