Amino acid promoted CuI-catalyzed C-N bond formation between aryl halides and amines or N-containing heterocycles

CuI-catalyzed coupling reaction of electron-deficient aryl iodides with aliphatic primary amines occurs at 40 degrees C under the promotion of N-methylglycine. Using l-proline as the promoter, coupling reaction of aryl iodides or aryl bromides with aliphatic primary amines, aliphatic cyclic secondary amines, or electron-rich primary arylamines proceeds at 60-90 degrees C; an intramolecular coupling reaction between aryl chloride and primary amine moieties gives indoline at 70 degrees C; coupling reaction of aryl iodides with indole, pyrrole, carbazole, imidazole, or pyrazole can be carried out at 75-90 degrees C; and coupling reaction of electron-deficient aryl bromides with imidazole or pyrazole occurs at 60-90 degrees C to provide the corresponding N-aryl products in good to excellent yields. In addition, N,N-dimethylglycine promotes the coupling reaction of electron-rich aryl bromides with imidazole or pyrazole to afford the corresponding N-aryl imidazoles or pyrazoles at 110 degrees C. The possible action of amino acids in these coupling reactions is discussed.     

Phosphine-free palladium-catalysed direct 5-arylation of imidazole derivatives at low catalyst loading

The regioselective 5-arylation of imidazole derivatives with aryl bromides using a low loading of a phosphine-free palladium catalyst gives a simple and economic access to the corresponding 5-arylimidazoles. The choice of the base and of the solvent was found to be crucial to form these products in high yields. Using KOAc as the base, DMAc as the solvent and only 0.5-0.01 mol % Pd(OAc)₂ as the catalyst, the target products were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester or nitrile on the aryl bromide are tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. The nature of the substituents on the imidazole derivative has an important influence on the yields.     

Study of CuI catalyzed coupling reactions of aryl bromides with imidazole and aliphatic amines under microwave dielectric heating

Amination of a variety of functionalized aryl bromides with imidazole and primary and secondary amines was accomplished using a CuI/amino acid catalyst system under microwave heating. Application of microwave irradiation shortened the reaction time from 25–40 h to 6–20 min. Good to very good yields of the corresponding coupling products were obtained when imidazole and secondary amines were used as starting materials. In case of primary amines, the outcome of the reaction was dependent on the character of the substituent on aryl bromide.     

One pot Pd(OAc)2-catalysed 2,5-diarylation of imidazoles derivatives

The regioselective 2- or 5-arylation of imidazole derivatives with aryl halides using palladium catalysts has been described in recent years; whereas the arylation at both C2 and C5 carbons of imidazoles in high yields has not been performed. We found conditions allowing the access to these 2,5-diarylimidazoles via a one pot reaction. The choice of the base was found to be crucial to obtain these products in high yields. Using CsOAc as the base, DMA as the solvent and only 2 mol % of the phosphine-free Pd(OAc)₂ the catalyst, the target 2,5-diarylated imidazoles were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester, nitro or nitrile on the aryl bromide were tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. Surprisingly the nature of the substituent at position 1 on the imidazole derivative exhibits a huge influence on the reaction.     

Microwave-assisted solvent-free N-arylation of imidazole and pyrazole

Solvent-free coupling reactions between imidazole or pyrazole and aryl bromides were achieved with microwave irradiation using copper salts and l-amino acids as catalysts.     

4,7-Dimethoxy-1,10-phenanthroline: an excellent ligand for the Cu-catalyzed N-arylation of imidazoles

[reaction: see text] 4,7-Dimethoxy-1,10-phenanthroline (L) was found to be an efficient ligand for the copper-catalyzed N-arylation of imidazole with aryl iodides and bromides under mild conditions. A variety of hindered and functionalized imidazoles and aryl halides were transformed in good to excellent yields.     

Ligand-free copper(I) catalyzed N- and O-arylation of aryl halides

A simple and industrially viable protocol for C-N and C-O coupling is reported here. Arylation of phenol, benzylamine and imidazole with aryl bromides is achieved using ligand-free Cu(I) halide salts in low catalytic amount (2.5 mol %).     

Barbier–Negishi Coupling of Secondary Alkyl Bromides with Aryl and Alkenyl Triflates and Nonaflates

A mild and practical Barbier–Negishi coupling of secondary alkyl bromides with aryl and alkenyl triflates and nonaflates has been developed. This challenging reaction was enabled by the use of a very bulky imidazole‐based phosphine ligand, which resulted in good yields as well as good chemo‐ and site selectivities for a broad range of substrates at room temperature and under non‐aqueous conditions. This reaction was extended to primary alkyl bromides by using an analogous pyrazole‐based ligand.     

Synthesis of primary aromatic amides by aminocarbonylation of aryl halides using formamide as an ammonia synthon

Primary aromatic amides were prepared by a palladium-catalyzed aminocarbonylation reaction of aryl halides in high yields (70-90%) using formamide as the amine source. The reactions require a palladium catalyst in combination with a nucleophilic Lewis base such as imidazole or 4-(dimethylamino)pyridine (DMAP). Aryl, heteroaryl, and vinyl bromides and chlorides were converted to the primary amides under mild conditions (5 bar, 120 degrees C) using 1 mol % of a palladium-phosphine complex. Best results were obtained in dioxane using triphenylphosphine as the ligand and DMAP as the base. For activated aryl bromides, a phosphine-to-palladium ratio of 2:1 was sufficient, but less reactive aryl bromides or aryl chlorides required ligand-to-palladium ratios up to 8:1 in order to stabilize the catalyst and achieve full conversion. The influence of catalyst, base, solvent, pressure, and temperature was studied in detail. The mechanism of the reaction could be clarified by isolating and identifying the reaction intermediates. In addition, methylamides and dimethylamides were prepared by the same method using N-methylformamide and N,N-dimethylformamide as the amine source.     

An in situ generated CuI/metformin complex as a novel and efficient catalyst for C–N and C–O cross-coupling reactions

An in situ generated complex of copper(I) and a biguanide, namely metformin, was found to be a highly efficient homogeneous catalyst in N/O-arylation reactions. The O-arylation of substituted phenols with various aryl iodides and bromides was also achieved using this copper catalyst to afford diaryl ethers in good to excellent yields in DMF. This heterogeneous copper catalyst also promotes the N-arylation of imidazole with a variety of aryl halides (Cl, Br, I) in acetonitrile.     

Regioselective synthesis of 1,5-diaryl-1H-imidazoles by palladium-catalyzed direct arylation of 1-aryl-1H-imidazoles

[reaction: see text] A variety of 1,5-diaryl-1H-imidazoles have been regioselectively synthesized by direct coupling of 1-aryl-1H-imidazoles with aryl iodides or bromides in DMF in the presence of CsF as the base and a catalyst precursor consisting of a mixture of Pd(OAc)2 and AsPh3. The data obtained in this synthetic study support a reaction mechanism involving an electrophilic attack of an arylpalladium(II) halide species onto the imidazole ring. Interestingly, some imidazole derivatives synthesized in this study have been found to exhibit significant cytotoxic activity against human tumor cell lines.     

Amination Reactions of Aryl Halides with Nitrogen‐Containing Reagents Catalyzed by CuI in Ionic Liquid

CuI‐catalyzed coupling reactions of aryl iodides and electron‐deficient aryl bromides with nitrogen‐containing reagents, such as imidazole, benzimidazole, aliphatic primary and secondary amines, aniline, primary and secondary amides, in ionic liquid were developed. The reaction conditions involved the use of [Bmim][BF₄] as the solvent, potassium phosphate as the base, and CuI as the catalyst. The CuI and [Bmim][BF₄] could be recovered and recycled for five consecutive trials without significant loss of their activity.     

Synthesis of unsymmetrical aroyl acyl imides by aminocarbonylation of aryl bromides.

Aroyl imides were prepared by a palladium-catalyzed aminocarbonylation reaction of aryl bromides with carbon monoxide and primary amides in good yields (58-72%). The reactions were carried out under mild conditions (5 bar, 120 degrees C) using 1 mol % of a palladium phosphine complex. Several aryl bromides were reacted with formamide, acetamide, benzamide, and benzenesulfonamide, respectively. For activated aryl bromides, a phosphine-to-palladium ratio of 2:1 was sufficient, but less reactive aryl bromides required a ligand-to-palladium ratio of 6:1 in order to stabilize the catalyst and achieve full conversion. The imides were very sensitive to aqueous basic conditions and were easily converted to aroyl amides or benzoic acids.     

Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

N-hydroxyimides as efficient ligands for the copper-catalyzed N-arylation of pyrrole, imidazole, and indole

An experimentally simple, efficient, and inexpensive catalyst system was developed for the N-arylation of pyrroles, indoles, and imidazole with aryl and heteroaryl iodides, bromides, and chlorides by applying CuI as catalyst, N-hydroxysuccinimide (L1), N-hydroxymaleimide (L2), or N-hydroxyphthalimide (L3) as ligand, CH3ONa as base, and DMSO as solvent. A variety of functional groups are tolerated in the reaction, including those that are not compatible with Pd-catalyzed amidation methodology.     

Efficient catalysis of Ullmann-type arylation reactions by a novel trinuclear copper(I) complex with a chelating tricarbene ligand

A novel trinuclear copper(I) complex with a chelating tricarbene ligand is shown to be an efficient catalyst for the arylation of different classes of compounds containing N-H or O-H functions. Different kinds of azole rings (pyrazole, imidazole, 1,2,4-triazole) can be arylated with comparable efficiencies at relatively mild temperatures (100 °C). The catalyst activates aryl iodides, bromides and even chlorides for the reaction. An unusually strong influence of the nature of the aryl substituent on the reaction yield is observed. The synthetic protocol can be extended to other substrate classes, such as phenols and amides, although the catalytic efficiency with amides is significantly reduced.     

聚乙二醇(PEG)桥连的新型双N-杂环卡宾-膦的合成及其在水相Suzuki反应中的应用

通过乙酸1-(2-二苯膦基二茂铁基)乙基酯与PEG-400衍生的双咪唑化合物反应,制得新型PEG桥连的双咪唑盐-膦配体,其结构经1HNMR,<31>PNMR和MS鉴定.初步催化研究表明,该PEG桥连的双咪唑盐一膦可作为支持配体在有机和水相中高产率地实现Pd催化的溴代芳烃和苯硼酸的Suzuki偶联反应.     

Nickel-catalyzed reductive coupling of aryl halides with secondary alkyl bromides and allylic acetate

A room-temperature Ni-catalyzed reductive method for the coupling of aryl bromides with secondary alkyl bromides has been developed, providing C(sp(2))-C(sp(3)) products in good to excellent yields. Slight modification of this protocol allows efficient coupling of activated aryl chlorides with cyclohexyl bromide and aryl bromides with allylic acetate.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

N6-Arylation of 2'-deoxyadenosine via copper-catalyzed direct coupling with aryl halides

[reaction: see text] A general method for efficient N(6)-arylation of 2'-deoxyadenosine via copper-catalyzed direct coupling with aryl iodides and bromides is described. The method is useful for aryl halides with either electron-donating or electron-withdrawing groups.