Cyclization reactions of acylium and thioacylium ions with isocyanates and isothiocyanates: Gas phase synthesis of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions

Gas-phase reactions of several acylium and thioacylium ions, that is H2C=N-C+=O, H2C=N-C+=S, O=C=N-C+=O, S=C=N-C+=O, H3C-C+=O, and (CH3)2N-C+=O, with both a model isocyanate and isothiocyanate, that is, C2H5-N=C=O and C2H5-N=C=S, were investigated using tandem-in-space pentaquadrupole mass spectrometry. In these reactions, the formation of mono- and double-addition products is observed concurrently with proton transfer products. The double-addition products are far more favored in reactions with ethyl isocyanate, whereas the reactions with ethyl isothiocyanate form, preferentially, either the mono-addition product or proton transfer products, or both. Retro-addition dominates the low-energy collision-induced dissociation of the mono- and double-addition products with reformation of the corresponding reactant ions. Ab initio calculations at Becke3LYP//6-311 + G(d,p) level indicate that cyclization is favored for the double-addition products and that products equivalent to those synthesized in solution, that is, of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions and sulfur analogs, are formed.     

Syntheses and structures of quinuclidine-stabilized amido- and azidogallanes

Quinuclidine-stabilized amido- and azidogallanes, HGa[N(TMS)2]2(quin) (1), H2Ga[N(TMS)2](quin) (2), HGa-[N(H)(2,6-iPr2C6H3)]2(quin) (3), and H2GaN3(quin) (4), were synthesized from the quinuclidine adducts of mono- and dichlorogallane. Structural determinations revealed that all compounds were monomeric with four-coordinate gallium centers. Reactions of the five-coordinate compound, HGaCl2(quin)2, with 2 equiv of Li[N(TMS)2] or Li[N(H)(2,6-iPr2C6H3)] resulted in the isolation of compound 1 or 3. A ligand redistribution during the reaction of H2GaCl(quin) with Li[N(H)(2,6-iPr2C6H3)] produced compound 3 and H3Ga(quin) in a 1:1 molar ratio.     

Preparations, structures, and electrochemical studies of aryldiazene complexes of rhenium: syntheses of the first heterobinuclear and heterotrinuclear derivatives with bis(diazene) or bis(diazenido) bridging ligands

The mono- and binuclear aryldiazene complexes [Re(C6H5N=NH)(CO)5-nPn]BY4 (1-5) and [(Re(CO)5-nPn)2-(mu-HN=NAr-ArN=NH)](BY4)2 (6-12) [P = P(OEt)3, PPh(OEt)2, PPh2OEt; n = 1-4; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-(2-CH3)C6H3-C6H3(2-CH3), 4,4'-C6H4-CH2-C6H4; Y = F, Ph) were prepared by reacting the hydride species ReH(CO)5-nPn with the appropriate mono- and bis(aryldiazonium) cations. These compounds, as well as other prepared compounds, were characterized spectroscopically (IR; 1H, 31P, 13C, and 15N NMR data), and 1a was also characterized by an X-ray crystal structure determination. [Re(C6H5N=NH)(CO)(P(OEt)3)4]BPh4 (1a) crystallizes in space group P1 with a = 15.380(5) A, b = 13.037(5) A, c = 16.649(5) A, alpha = 90.33(5) degrees, beta = 91.2(1) degrees, gamma = 89.71(9) degrees, and Z = 2. The "diazene-diazonium" complexes [M(CO)3P2(HN=NAr-ArN identical to N)](BF4)2 (13-15, 17) [M = Re, Mn; P = PPh2OEt, PPh2OMe, PPh3; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4] and [Re(CO)4(PPh2OEt)(4,4'-HN=NC6H4-C6H4N identical to N)](BF4)2 (16b) were synthesized by allowing the hydrides MH(CO)3P2 or ReH(CO)4P to react with equimolar amounts of bis(aryldiazonium) cations under appropriate conditions. Reactions of diazene-diazonium complexes 13-17 with the metal hydrides M2H2P'4 and M2'H(CO)5-nP"n afforded the heterobinuclear bis(aryldiazene) derivatives [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2HP'4](BPh4)2 (ReFe, ReRu, ReOs, MnRu, MnOs) and [M1(CO)3P2(mu-HN=NAr-ArN=NH)M2'(CO)5-nP"n](BPh4)2 (ReMn, MnRe) [M1 = Re, Mn; M2 = Fe, Ru, Os; M2' = Mn, Re; P = PPh2OEt, PPh2OMe; P',P" = P(OEt)3, PPh(OEt)2; Ar-Ar = 4,4'-C6H4-C6H4, 4,4'-C6H4-CH2-C6H4; n = 1, 2]. The heterotrinuclear complexes [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)M(P(OEt)3)4(mu-4,4'-HN=NC6H4- C6H4N=NH)Mn(CO)3(PPh2OEt)2](BPh4)4 (M = Ru, Os) (ReRuMn, ReOsMn) were obtained by reacting the heterobinuclear complexes ReRu and ReOs with the appropriate diazene-diazonium cations. The heterobinuclear complex with a bis(aryldiazenido) bridging ligand [Mn(CO)2(PPh2OEt)2(mu-4,4'-N2C6H4-C6H4N2)Fe(P(OEt)3)4]BPh4 (MnFe) was prepared by deprotonating the bis(aryldiazene) compound [Mn(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N=NH)Fe(4- CH3C6H4CN)(P(OEt)3)4](BPh4)3. Finally, the binuclear compound [Re(CO)3(PPh2OEt)2(mu-4,4'-HN=NC6H4-C6H4N2)Fe(CO)2(P(OPh)3)2](BPh4)2 (ReFe) containing a diazene-diazenido bridging ligand was prepared by reacting [Re(CO)3(PPh2OEt)2(4,4'-HN=NC6H4-C6H4N identical to N)]+ with the FeH2(CO)2(P(OPh)3)2 hydride derivative. The electrochemical reduction of mono- and binuclear aryldiazene complexes of both rhenium (1-12) and the manganese, as well as heterobinuclear ReRu and MnRu complexes, was studied by means of cyclic voltammetry and digital simulation techniques. The electrochemical oxidation of the mono- and binuclear aryldiazenido compounds Mn(C6H5N2)(CO)2P2 and (Mn(CO)2P2)2(mu-4,4'-N2C6H4-C6H4N2) (P = PPh2OEt) was also examined. Electrochemical data show that, for binuclear compounds, the diazene bridging unit allows delocalization of electrons between the two different redox centers of the same molecule, whereas the two metal centers behave independently in the presence of the diazenido bridging unit.     

Infrared reflection-absorption spectra of C2H4 and C2H6 on Cu: effect of surface roughness

Infrared reflection absorption spectroscopy (IRRAS) of the highly symmetric molecules C2H4 and C2H6 adsorbed as mono- and multilayers onto copper films is studied in relation to the type of metal-film roughness. Spectra of C2H4 show Raman lines on cold-deposited Cu films but not on Cu deposited at room temperature. For C2H6, the IR spectra from both types of metal films are similar; the surface infrared selection rule holds and no Raman bands are observed. The Raman lines that appear in the IR spectra already at low exposures are attributed to species adsorbed at special defect sites, identical to the so-called active sites in surface enhanced Raman scattering (SERS). The IR excitation mechanism by transient electron transfer to the adsorbate pi* state can deliver a discrete vibrational band of a Raman-active vibration only under certain circumstances, for example, for adsorbates at the "SERS-active sites". C2H6 at these sites cannot deliver Raman bands in IRRAS, because it has no pi* state. We also discuss IRRAS measurements on Cu(111) and Cu(110) single crystals, where Raman bands of C2H4 have been observed.     

Synthesis and structural characterization of four new organically-directed bismuth sulfates

Four new organically-directed bismuth sulfates, (C(2)N(2)H(10))(3)[Bi(2)(SO(4))(6)(H(2)O)(2)].4H(2)O (), (C(5)N(2)H(14))[Bi(SO(4))(2)(HSO(4))(H(2)O)].H(2)O (), (C(4)N(3)H(16))[Bi(SO(4))(3)(H(2)O)] () and (C(6)N(4)H(22))[Bi(2)(SO(4))(5)(H(2)O)(2)].4H(2)O () have been synthesized and structurally characterized by single-crystal X-ray diffraction analysis. Four compounds were constructed from strictly alternating BiO(n) and SO(4) polyhedra. and both exhibit similar infinite courrgated anionic layers with 8-membered ring windows, shows a new 1D ladder-like chain containing 4-membered rings, while possesses a new flat layer with 12-membered ring windows. The diverse linking fashions of the five-connected Bi nodes and the mono-, bi- or tri-connected S nodes form unique Bi-S-Bi topologies. Their fluorescent properties are also reported.     

X-ray diffraction and NMR studies on a series of Binap-based Ru(II) hydroxyphosphine pi-arene complexes

A series of new Ru(II) arene phosphine complexes derived from Binap have been prepared. Specifically, reaction of Ru(OAc)(2)(Binap) with 3,5-(CF(3))(2)C(6)H(3))(4)B (BArF).H(OEt(2))(2), is shown to afford new mono- and dinuclear Ru(II) hydroxyphosphine pi-arene complexes via a series of P-C bond cleavage reactions. The dinuclear Ru(II) pi-arene complexes contain bridging P(O)(OH)(2) ligands. Crystal structures of five new complexes are reported and suggest an eta(4)-arene rather than an eta(6)-arene coordination mode. However, in solution, their (13)C NMR data are more consistent with a strongly distorted eta(6)-coordination mode. PGSE (1)H and (19)F diffusion measurements on the dinuclear complexes suggest hydrogen bonding of the triflate anion and ion-pairing of the BArF(-) anion.     

Inversion Properties of n-Alkane Phosphonic Acids Stabilized Emulsions: HLB Dependence

The emulsifier properties of n-alkane phosphonic acids (C10H21PO3H2; C12H25PO3H2 and C13H27PO3H2) and their mono- and di-sodic salts were studied, with emphasis on the morphological and dynamical inversion properties as a function of their neutralization degree. Maximum stabilization properties were appreciated for C10PO3H2 and C12PO3H2 while not for C13PO3H2. Such fact is associated to their odd number of carbon atoms chain, which is the origin of the intrachain constraints on the tail-chain flexibility.     

Light group 13 chloride diazadiene complexes: consequences of varying substituent bulk

BCl3 cyclizes diazadiene (2,6-Pr(i)2C6H3NCH)2 1 through a dichloroborated intermediate [(2,6-Pr(i)2C6H3NCHCl)2BCl] to give, in polar aprotic solvents, a spontaneously dehyrochlorinated C-chloro diazaborole 4. In contrast, reaction of AlCl3 with 1 forms only acyclic mono- or di-adducts 5a/b and 6. Alkali metal reductions of gave mixtures of 4 and diazaborole [(2,6-Pr(i)2C6H3NCH)2BCl] 7. Pd(0) reduction cleanly gave diazaborole 7. Reduction of 6 gave a low yield of the closed shell C-C coupled dimer 8 of the putative diazadiene radical anion 1.AlCl2 complex monomer. An alternative synthesis for diazadiene (2,6-Pr(i)2C6H4NCPh)2, 2, is reported. Reduction of 2/BCl3, in which additional phenyl groups on the diazadiene C-2 and C-3 atoms hinder the radical coupling observed in , gave predominantly diazaborole .BCl, (9a) contaminated with .BCl2, (9b) the first such stable radical diazadiene complex of boron. All compounds 2-9 were characterized by X-ray diffraction and NMR spectroscopy. Stable radical was additionally characterized by EPR spectroscopy and density functional computation.     

The tautomeric forms of cyameluric acid derivatives

The tautomerism of cyameluric acid C6N7O3H3 (1 a), cyamelurates and other heptazine derivatives has recently been studied by several theoretical investigations. In this experimental study we prepared stannyl and silyl derivatives of cyameluric acid (1 a): C6N7O3[Sn(C4H9)3]3 (3 a), C6N7O3[Sn(C2H5)3]3 (3 b), and C6N7O3[Si(CH3)3]3 (4). In order to investigate the structure of 1 a the mono- and dipotassium cyamelurate hydrates K(C6N7O3H2)2 H2O (5) and K2(C6N7O3H)1 H2O (6) were synthesized by UV/Vis-controlled titration of a potassium cyamelurate solution with aqueous hydrochloric acid. Compounds 3-6 were characterized by FTIR and solid-state NMR spectroscopy as well as simultaneous thermal analysis (TGA, DTA). The single crystal X-ray structures of the salts 5 and 6 show that the hydrogen atoms in both anions are localized on the peripheral nitrogen atoms. This indicates-in combination with the solid-state NMR studies-that the most stable tautomer of solid 1 a is the triketo form with C3h symmetry. However, derivatives of both the hydroxyl and the amido tautomers may be formed depending on the substituent atoms: The spectroscopic data and single crystal structures of compounds C6N7O3[Si(CH3)3]3 (4) and the solvate C6N7O3[Sn(C2H5)3]3C2H4Cl2 (3 b') show that the former is derived from the symmetric trihydroxy form of 1 a, while 3 b' crystallizes as a chain-like polymer, which contains the tin atoms as multifunctional building blocks, that is, bridging pentacoordinated Et3SnO2 and Et3SnON units as well as non-bridging four-coordinated Et3SnN units. The cyameluric nucleus is part of the polymeric chains of C6N7O3[Sn(C2H5)3]3C2H4Cl2 (3 b'), by the action of both tautomeric forms of cyameluric acid, the amide and the ester form.     

Reversal of polarization in amidophosphines: neutral- and anionic-kappaP coordination vs. anionic-kappaP,N coordination and the formation of nickelaazaphosphiranes

Nickel(ii) chloride reacts with the bis(tert-butylamino)diazadiphosphetidine {Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)} to form trans-[{Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)}(2)NiCl(2)]. In solution and the solid-state each heterocyclic ligand coordinates nickel through one phosphorus atom only. For comparison the solid-state structure of the known trans-[NiCl(2)(PEt(3))(2)] was also determined and it was found that the two complexes have almost identical bond parameters about nickel. The nickel-amidophosphine complexes [{Bu(t)OP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], [(PBu(n)(3))ClNi{Bu(t)NP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], and [{Me(2)Si(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))] were synthesized and X-ray structurally characterized. In these mono- and di-nuclear nickel complexes the nickel ions are coordinated in pseudo square-planar fashions, by one trialkylphosphine ligand, one chloride ligand and one kappaP,N-coordinated amidophosphine moiety from tert-butylamido-substituted heterocycles. Attempts to create nickel complexes chelated in a kappa(2)P fashion by the o-phenylenediamine-tethered mono- and di-anionic 1-{Me(2)Si(micro-NBu(t))(2)PN} 2-{Me(2)Si(micro-NBu(t))(2)PNH}C(6)H(4) and 1,2-{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4), respectively, afforded instead [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)NiCl] and [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)Ni{PEt(3)}], each complex having kappaP,N and kappaP coordinated amidophosphine ligands.     

Synthesis and application of mono-2A-azido-2A-deoxyperphenylcarbamoylated beta-cyclodextrin and mono-2A-azido-2A-deoxyperacetylated beta-cyclodextrin as chiral stationary phases for high-performance liquid chromatography

Two novel chiral stationary phases (CSPs) were prepared based upon the regioselective immobilizations of beta-cyclodextrin (beta-CD) at its C2 position to the silica support. The mono-2A-azido-2A-deoxyperphenylcarbamoylated beta-cyclodextrin and mono-2A-azido-2A-deoxyperacetylated beta-cyclodextrin were synthesized by selective tosylation and azidolysis followed by perfunctionalisation. The derivatised cyclodextrins were then immobilized onto the aminised silica gel via the Staudinger reaction to provide new chiral stationary phases. Their application to high-performance liquid chromatography (HPLC) enantioseparation of racemic compounds was demonstrated using beta-adrenergic blockers, flavonone compounds, benzodiazepinones, antihistamines and weakly protolytic compounds, of which good separations were achieved for some racemic compounds, for instance, bendroflumethiazide (Rs 6.26), oxazepam (Rs 5.99), temazepam (Rs 2.85) and althiazide (Rs 1.13) when compared with the corresponding CSPs where the beta-CD molecule was regioselectively immobilized at the C6 position. The enantiodiscriminatory properties of these CSPs were found to be affected by the orientation of the CD cavity under reversed-phase conditions, and also by the derivitising groups of the CD. The HPLC results inferred that the mono-6A-azido-6A-deoxyperphenylcarbamoylated CD CSP (CD bonded at C6 position to silica) exhibited slightly better chiral recognition ability than mono-2A-azido-2A-deoxyperphenylcarbamoylated CD CSP under the normal-phase and reversed-phase modes on the separation of 31 different racemic compounds and drugs. On the contrary, higher chiral recognition abilities were observed on the mono-2(A)-azido-2A-deoxyperacetylated CD CSP compared to mono-6A-azido-6A-deoxyperacetylated CD CSP.     

Oxygen Abstraction Reactions of N-Substituted Hydroxamic Acids with Molybdenum(V) and Vanadium(III) and -(IV) Compounds

A wide range of N-substituted mono- and dihydroxamic acids undergo oxygen abstraction on reaction with V(III), V(IV), and Mo(V) compounds to form hydroxamates of V(V) and Mo(VI) respectively together with the corresponding amides and diamides. The molybdenyl and vanadyl hydroxamates form metal-oxygen clusters under FABMS conditions. The X-ray crystal structures of [MoO(2){CH(3)(CH(2))(n)()C(O)N(C(6)H(5))O}(2) (1 and 2) (n = 4, 5) show monomeric structures with structural trans effects and consequent weakening of the Mo-O(ligand) bonds which may account for the tendency to form clusters in FABMS. In constrast, the electrospray MS of the vanadyl dihydroxamates, VO(OH)[PhN(O)C(O)(CH(2))(n)()C(O)N(O)Ph] (n = 3, 5) and VO(OH)[p-CH(3)C(6)H(4)N(O)C(O) (CH(2))(n)()C(O)N(O)C(6)H(4)-CH(3)) (n = 2, 4) show the presence of dimers in solution.     

Redox-active p-quinone-based Bis(pyrazol-1-yl)methane ligands: synthesis and coordination behaviour

The synthesis, structural characterisation and coordination behaviour of mono- and ditopic p-hydroquinone-based bis(pyrazol-1-yl)methane ligands is described (i.e., 2-(pz2CH)C6H3(OH)2 (2a), 2-(pz2CH)-6-(tBu)C6H2(OH)2 (2b), 2-(pz2CH)-6-(tBu)C6H2(OSiiPr3)(OH) (2c), 2,5-(pz2CH)2C6H2(OH)2 (4)). Ligands 2a, 2b and 4 can be oxidised to their p-benzoquinone state on a preparative scale (2a ox, 2b ox, 4 ox). An octahedral Ni II complex [trans-Ni(2c)2] and square-planar Pd II complexes [Pd2bCl2] and [Pd2b ox Cl2] have been prepared. In the two Pd II species, the ligands are coordinated only through their pyrazolyl rings. The fact that [Pd2bC12] and [Pd2b oxC12] are isolable compounds proves that redox transitions involving the p-quinone substituent are fully reversible. In [Pd2b oxCl2], the methine proton is highly acidic and can be abstracted with bases as weak as NEt(3). The resulting anion dimerises to give a dinuclear macrocyclic Pd II complex, which has been structurally characterised. The methylated ligand 2-(pz2CMe)C6H3O2 (11 ox) and its Pd II complex [Pd11 oxCl2] are base-stable. A new class of redox-active ligands is now available with the potential for applications both in catalysis and in materials science.     

Metal-assembled cobalt(II) resorc[4]arene-based cage molecules that reversibly capture organic molecules from water and act as NMR shift reagents

The complex Co4 1(2)8- is a tetranuclear cobalt(II) cage compound that assembles in aqueous solutions above pH 4 and is capable of encapsulating a variety of organic guest molecules, for example, benzene, hexane, chlorobutane, butanol, and ethyl acetate. Ligand 1 is a resorc[4]arene-based molecule with iminodiacetate moieties appended to its upper rim. 1H NMR studies of Co4 1(2)8-.guest complexes demonstrate inclusion of nonpolar hydrocarbons, substituted phenyls, alcohols, halogen-containing hydrocarbons, and polar organic molecules. The complex Co4 1(2)8- acts as an NMR shift reagent and causes substantial upfield isotropic hydrogen shifts (-30 to -40 ppm) in the guest molecule and separation of the guest hydrogen chemical shifts by typically 12 ppm. The complex Co4 1(2)8- will encapsulate molecules with fewer than eight atoms in a linear chain, mono- and disubstituted benzenes, and polar molecules with greater than two carbon atoms. The solid-state structure of Ba4[Co4 1(2).C6H5C2H5] shows a disordered guest molecule encapsulated within the cavity of Co4 1(2)8-. The cavity dimensions, bond lengths, and bond angles of Ba4[Co4 1(2).C6H5C2H5] are very similar to those determined in Ba4[Co4 1(2).6H2O].     

New and old NMR experiments for the resonance assignment of complex oligosaccharides--application to a cyclodextrin derivative

The complete assignment of the (1)H and (13)C sugar resonances in mono-3,6-anhydro-heptakis(2,3-O-methyl)-hexakis(6-O-methyl)-β-cyclodextrin, an asymmetrically functionalized β-cyclodextrin, was carried out by means of 2D NMR experiments. The TOCSY and the homonuclear multiple relay COSY spectra provided most of the (1)H assignments. The multiplicity edited HSQC and a set of F(1) selective HSQC-TOCSY and multiple relay HSQC-COSY spectra gave access to most of the (13)C chemical shifts. The latter were fully and accurately determined by means of a pair of complementary, highly folded HSQC-TOCSY spectra. The TOCSY-ROESY and ROESY-TOCSY spectra yielded the sequential assignment of the sugar units. A high resolution F(1) selective F(1) decoupled version of the TOCSY-ROESY experiment was recorded.     

Unexpectedly efficient activation of push-pull nitriles by a Pt(II) center toward dipolar cycloaddition of Z-nitrones

Pt(II)-coordinated NCNR'(2) species are so highly activated towards 1,3-dipolar cycloaddition (DCA) that they react smoothly with the acyclic nitrones ArCH=N(+)(O(-))R' (Ar/R' = C(6)H(4)Me-p/Me; C(6)H(4)OMe-p/CH(2)Ph) in the Z-form. Competitive reactivity study of DCA between trans-[PtCl(2)(NCR)(2)] (R = Ph and NR'(2)) species and the acyclic nitrone 4-MeC(6)H(4)CH=N(+)(O(-))Me demonstrates comparable reactivity of the coordinated NCPh and NCNR'(2), while alkylnitrile ligands do not react with the dipole. The reaction between trans-[PtCl(2)(NCNR'(2))(2)] (R'(2) = Me(2), Et(2), C(5)H(10)) and the nitrones proceed as consecutive two-step intermolecular cycloaddition to give mono-(1a-d) and bis-2,3-dihydro-1,2,4-oxadiazole (2a-d) complexes (Ar/R' = p-tol/Me: R'(2) = Me(2)a, R'(2) = Et(2)b, R'(2) = C(5)H(10)c; Ar/R' = p-MeOC(6)H(4)/CH(2)Ph: R'(2) = Me(2)d). All complexes were characterized by elemental analyses (C, H, N), high resolution ESI-MS, IR, (1)H and (13)C{(1)H} NMR spectroscopy. The structures of trans-1b, trans-2a, trans-2c, and trans-2d were determined by single-crystal X-ray diffraction. Metal-free 5-NR'(2)-2,3-dihydro-1,2,4-oxadiazoles 3a-3d were liberated from the corresponding (dihydrooxadiazole)(2)Pt(II) complexes by treatment with excess NaCN and the heterocycles were characterized by high resolution ESI(+)-MS, (1)H and (13)C{(1)H} spectroscopy.     

Kinetics and mechanism of a catalytic chloride ion effect on the dissociation of model siderophore hydroxamate-iron(III) complexes

Proton-driven ligand dissociation kinetics in the presence of chloride, bromide, and nitrate ions have been investigated for model siderophore complexes of Fe(III) with the mono- and dihydroxamic acid ligands R(1)C(=O)N(OH)R(2) (R(1) = CH(3), R(2) = H; R(1) = CH(3), R(2) = CH(3); R(1) = C(6)H(5), R(2) = H; R(1) = C(6)H(5), R(2) = C(6)H(5)) and CH(3)N(OH)C(=O)[CH(2)](n)C(=O)N(OH)CH(3) (H(2)L(n); n = 2, 4, 6). Significant rate acceleration in the presence of chloride ion is observed for ligand dissociation from the bis(hydroxamate)- and mono(hydroxamate)-bound complexes. Rate acceleration was also observed in the presence of bromide and nitrate ions but to a lesser extent. A mechanism for chloride ion catalysis of ligand dissociation is proposed which involves chloride ion dependent parallel paths with transient Cl(-) coordination to Fe(III). The labilizing effect of Cl(-) results in an increase in microscopic rate constants on the order of 10(2)-10(3). Second-order rate constants for the proton driven dissociation of dinuclear Fe(III) complexes formed with H(2)L(n)() were found to vary with Fe-Fe distance. An analysis of these data permits us to propose a reactive intermediate of the structure (H(2)O)(4)Fe(L(n)())Fe(HL(n))(Cl)(OH(2))(2+) for the chloride ion dependent ligand dissociation path. Environmental and biological implications of chloride ion enhancement of Fe(III)-ligand dissociation reactions are presented.     

Unusual Anions [LAl(SH)(S)]- and [LAl(S)2]2- stabilized by weakly coordinating imidazolium cations. synthesis of LAl(SSiMe2)2O (L = HC[C(Me)N(Ar)]2, Ar = 2,6-iPr2C6H3)

Deprotonation of an Al-SH moiety has been achieved easily by using N-heterocyclic carbene as the base. Monomeric mono- and bis-imidazolium salts [C(t)H(+)][LAl(SH)(S)](-) ([C(t)H(+)] = N,N'-bis-tert-butylimidazolium), [C(m)H(+)][LAl(SH)(S)](-), and [C(m)H(+)](2)[LAl(S)(2)](2-) ([C(m)H(+)] = N,N'-bismesitylimidazolium), containing unusual anions [LAl(SH)(S)](-) and [LAl(S)(2)](2-), have been synthesized in nearly quantitative yields. Furthermore, [C(m)H(+)](2)[LAl(S)(2)](2-) has been successfully used for the preparation of LAl(SSiMe(2))(2)O containing the [O(Me(2)SiS)(2)](2-) ligand.     

Phosphorus(III) cations supported by a PNP pincer ligand and sub-stoichiometric generation of P4 from thermolysis of a nickel insertion product

Neutral, mono-, and dicationic phosphorus(III) compounds are accessible with a supporting PNP pincer ligand (PNP = [4-Me-2-iPr(2)P-C(6)H(3))(2)N]). Reaction of (PNP)H with PCl(3) and nBu(3)N furnished (PNP)PCl(2) (1), which displays a highly temperature-dependent structure in solution. Synthesis and characterization by NMR spectroscopy and X-ray crystallography of Cl/Br-scrambled derivatives, a monocationic derivative [(PNP)PCl][HCB(11)H(11)] (4), and the dicationic derivatives [(PNP)P][OTf](2) (5), [(PNP)P][B(C(6)F(5))(4)](2) (6), [(PNP)P][B(12)Cl(12)] (7) established that 1 not only undergoes several fluxional processes in solution but also possesses a temperature-dependent ground state structure. Reaction of 1 with a Ni(0) source initially leads to a phosphine-phosphinidene complex, followed by thermal generation of P(4).     

Three-component Biginelli cyclocondensation reaction using C-glycosylated substrates. Preparation of a collection of dihydropyrimidinone glycoconjugates and the synthesis of C-glycosylated monastrol analogues

The aldehyde-ketoester-urea cyclocondensation reaction has been revisited using C-glycosylated reagents with the aim of exploring a potential entry to a library of dihydropyrimidinone glycoconjugates. A collection of 13 mono- and bis-C-glycosylated dihydropyrimidinones has been prepared by a parallel synthesis approach using the three-component promoter CuCl/AcOH/BF(3) x Et(2)O. The sugar residues have been installed at either N1, C4, or C6 in the monoglycosylated derivatives and at both the C4 and C6 in the bisglycosylated products. The mono- and bisglycosylated products at C4 and C6 were obtained as mixtures of diastereoisomers with good to excellent selectivities due to the asymmetric induction by the sugar residue in the formation of the C4 stereocenter of the dihydropyrimidinone ring. Individual stereoisomers were isolated as pure compounds and their structures assigned with the aid of X-ray crystallography and chiroptical properties. As a demonstration of this new concept in the Biginelli reaction, the synthesis of two C4 epimer monastrol analogues bearing the ribofuranosyl moiety at C6 has been described.