Adsorption of tetracycline onto goethite in the presence of metal cations and humic substances

Adsorption of tetracycline, one of the most widely used antibiotics, onto goethite was studied as a function of pH, metal cations, and humic acid (HA) over a pH range 3-10. Five background electrolyte cations (Li(+), Na(+), K(+), Ca(2+), and Mg(2+)) with a concentration of 0.01 M showed little effect on the tetracycline adsorption at the studied pH range. While the divalent heavy metal cation, Cu(2+), could significantly enhance the adsorption and higher concentration of Cu(2+), stronger adsorption was found. The results indicated that different adsorption mechanisms might be involved for the two types of cations. Background electrolyte cations hardly interfere with the interaction between tetracycline and goethite surfaces because they only form weak outer-sphere surface complexes. On the contrary, Cu(2+) could enhance the adsorption via acting as a bridge ion to form goethite-Cu(2+)-tetracycline surface complex because Cu(2+) could form strong and specific inner-sphere surface complexes. HA showed different effect on the tetracycline sorption under different pH condition. The presence of HA increased tetracycline sorption dramatically under acidic condition. Results indicated that heavy metal cations and soil organic matters have great effects on the tetracycline mobility in the soil environment and eventually affect its exposure concentration and toxicity to organisms.     

Interactions of metal ions with monoaza crown ethers A15C5 and A18C6 carrying dansyl fluorophore as pendant in acetonitrile solution

The influence of metal cations Li(+), Na(+), K(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Pb(2+) and Al(3+) on the spectroscopic properties of the dansyl (1-dimethylaminonaphthalene-5-sulfonyl) group covalently linked to monoaza crown ethers 1-aza-15-crown-5 (1,4,7,10,-tetraoxa-13-azacyclopentadecane) (A15C5) and 1-aza-crown-6 (1,4,7,10,13-pentaoxa-16-azacyclooctadecane) (A18C6) was investigated by means of absorption and emission spectrophotometry. Interaction of the alkali metal ions with both fluoroionophores is weak, while alkaline earth metal ions interact strongly causing 50 and 85% quenching of dansyl fluorescence of N-(5-dimethylamine-1-naphthalenesulfonylo)-1,4,7,10,-tetraoxa-13-azacyclopentadecane (A15C5-Dns) and N-(5-dimethylamine-1-naphthalenesulfonylo)-1,4,7,10,13-pentaoxa-16-azacyclooctadecane (A18C6-Dns), respectively. The Cu(2+), Pb(2+) and Al(3+) cations interact very strongly with dansyl chromophore, causing a major change in absorption spectrum of the chromophore and forming non-fluorescent complexes. The Co(2+), Ni(2+), Zn(2+), Mg(2+) cations interact moderately with both fluoroionophores causing quenching of dansyl fluorescence by several percent only.     

Tren centered tris-macrocycles as polytopic ligands for Cu(II) and Ni(II)

Two novel symmetric polytopic ligands L(1) and L(2) have been synthesized. They are composed of three 1,4,8,11-tetraazacyclotetradecane macrocycles which are connected to a central tren moiety via an ethylene and a trimethylene bridge, respectively. The complexation potential and the speciation diagrams of L(1) and L(2) towards Cu(2+) and Ni(2+) were determined by spectrophotometric and potentiometric titrations. Insight into the geometry of the Cu(2+) complexes is provided by UV-VIS and EPR spectroscopy. The simplified ligands L(3) and L(4) are utilized as references for an aminoethyl- and a tren-substituted tetraaza macrocycle to help assign the EPR spectra of the polytopic ligands L(1) and L(2). At a metal-to-ligand ratio of 3 : 1, the metal cations are preferentially bound to the tetraaza macrocycles of L(1) and L(2) in a square planar geometry. At high pH values, a nitrogen atom of the tren moiety in L(1) serves as an additional ligand in an axial position leading to a square pyramidal coordination around Cu(2+), whereas in L(2) no such geometry change is observed. At a metal-to-ligand ratio of 4 : 1, the additional metal cation resides in the central tren moiety of L(1) and L(2). However, in contrast to the typical trigonal bipyramidal geometry found in the [Cutren](2+) complex, the fourth Cu(2+) has a square pyramidal coordination caused by the interaction with the Cu(2+) cations in the macrocycles (as evidenced by EPR spectra). Since the sequence of metal complexation is such that the first three metal ions always bind to the three macrocycles of L(1) and L(2) and the fourth to the tren unit, it is possible to prepare heteronuclear complexes such as [Cu(3)NiL](8+) or [Ni(3)CuL](8+), which can be unambiguously identified by their spectral properties.     

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

Response of a benzoxainone derivative linked to monoaza-15-crown-5 with divalent heavy metals

The response of a monoaza-15-crown-5 with an optically active aminobenzoxazinone moiety to divalent cations was investigated. The crown ether was found to undergo a strong emission shift to the blue when complexed with specific divalent metals that have ionic diameters between 1.9-2.4 A. Consequently the photoactive macrocycle is responsive to Mg(2+), Ca(2+), Ba(2+), Sr(2+), Cd(2+), and particularly responsive to Hg(2+)and Pb(2+). Macrocycle emission spectra are shown to be a function of cation concentration. Alkaline metal cations and smaller transition metals ions such as Ni(2+), Co(2+)and Zn(2+)do not cause significant changes in the macrocycle emission spectra. Emission, absorption, and complex stability constants are determined. Mechanisms of cation selectivity and spectral emission shifts are discussed. Challenges involving immobilization of the macrocycle while preserving its spectral response to cations are explored.     

Lead-selective poly(vinyl chloride) membrane electrodes based on acyclic dibenzopolyether diamides

Lipophilic acyclic dibenzopolyether diamides, 12 kinds, have been designed to prepare solvent polymeric membrane ion-selective electrodes (ISEs) for Pb(2+). The ionophores include 1,5-bis[2-(N,N-dialkylcarbamoylmethoxy)phenoxy]-3-oxapentanes1-4, 1,5-bis[2-(N,N-dialkylcarbamoylpentadecyloxy)phenoxy]-3-oxapentanes 5-8, and 1,2-bis[2-(2'-N,N-dialkylcarbamoylpentadecyloxy)phenoxy]ethanes 9-12. Linear response concentration range of the ISE based on 9 is 3 x 10(-2) - 1 x 10(-6) M of Pb(2+) (average slope = 28.5 mV decade(-1)). Potentiometric selectivities of the ISEs based on 1-12 for Pb(2+) over other heavy metal cations, alkali metal cations, and alkaline earth metal cations have been assessed. These ISEs exhibit remarkably high selectivities for Pb(2+) relative to heavy metal cations, such as Cu(2+), Fe(2+), and Ni(2+), the selectivity coefficients (K(Pot)(Pb,Cu)) being 5 x 10(-5) - 6 x 10(-5) for 1-4 and ca. 6 x 10(-4) for 9. For the Pb(2+) selectivities over alkali metal cations, such as Na(+) and K(+), 9 which has an ethylene glycol spacer and a N,N-diethyl group is superior to other dibenzopolyether diamide ionophores 1-8 and 10-12.     

Complexes of bivalent metal cations in electrospray mass spectra of common organic compounds

In the standard electrospray ionization mass spectra of many common, low molecular mass organic compounds dissolved in methanol, peaks corresponding to ions with formula [3M + Met](2+) (M = organic molecule, Met = bivalent metal cation) are observed, sometimes with significant abundances. The most common are ions containing Mg(2+), Ca(2+) and Fe(2+). Their presence can be easily rationalized on the basis of typical organic reaction work-up procedures. The formation of [3M + Met](2+) ions has been studied using N-FMOC-proline methyl ester as a model organic ligand and Mg(2+), Ca(2+), Sr(2+), Ba(2+), Fe(2+), Ni(2+), Mn(2+), Co(2+) and Zn(2+) chlorides or acetates as the sources of bivalent cation. It was found that all ions studied form [3M + Met](2+) complexes with N-FMOC-proline methyl ester, some of them at very low concentrations. Transition metal cations generally show higher complexation activity in comparison with alkaline earth metal cations. They are also more specific in the formation of [3M + Met](2+) complexes. In the case of alkaline earth metal cations [2M + Met](2+) and [4M + Met](2+) complex ions are also observed. It has been found that [3M + Met](2+) complex ions undergo specific fragmentation at relatively low energy, yielding fluorenylmethyl cation as a major product. [M + Na](+) ions are much more stable and their fragmentation is not as specific.     

A comparative study on textural characterization: cation-exchange and sorption properties of crystalline alpha-zirconium(IV), tin(IV), and titanium(IV) phosphates

Tetravalent metal phosphates (M=Zr, Ti, and Sn) were prepared and characterized by XRD, surface properties, and TG-DTA. The cation exchange and sorption behavior of these metal phosphates toward transition metal ions such as Cu(2+), Co(2+), and Ni(2+) have been studied comparatively as a function of temperature and concentration. The adsorption process was found to increases with increase in temperature and concentration. The selectivity order for alpha-titanium and alpha-tin phosphates is Cu(2+)>Co(2+)>Ni(2+), whereas for alpha-zirconium phosphate it is Cu(2+)>Ni(2+)>Co(2+). The ion exchange capacity of alpha-titanium phosphate is greater than those of other phosphates, which is explained on the basis of the surface behavior, disorderness of the system, degree of hydrolysis of incoming guest adsorbate metal ions, and structural steric hindrance of the exchangers during adsorption and sorption. The distribution coefficient, Gibbs free energy, enthalpy, and entropy values indicate that the ion-exchange processes are spontaneous.     

Distance dependence of the reaction rate for the reduction of metal cations by solvated electrons: a picosecond pulse radiolysis study

The decay of the solvated electron generated by picosecond electron pulse radiolysis is studied by broad-band transient absorption measurements in ethylene glycol solutions containing decimolar concentrations of Cu(2+), Ni(2+), and Pb(2+) metal cations. Analysis of the nonexponential kinetics of the decays reveals molecular parameters of the electron transfer reaction. It is found that the reaction occurs at long distance for Cu(2+) solutions and is only limited to contact distance in the case of Ni(2+) solutions. The distribution of reaction distance strongly depends on the free enthalpy change of the reactions.     

A gadolinium(III) complex with 8-amidequinoline based ligand as copper(II) ion responsive contrast agent

A new Cu(2+)-responsive MRI contrast agent (Gd-QDOTAMA) with a quinoline-based ligand was synthesized and characterized. Relaxivity studies on Gd-QDOTAMA showed that the relaxivity increased from 4.27 mM(-1) s(-1) to 7.29 mM(-1) s(-1) in response to equimolar amounts of copper(II) ion, corresponding to ca. 71% relaxivity enhancement. Distinct changes in relaxivity were undetected upon addition of physiologically relevant alkali metal cations (K(+) or Na(+)), alkaline earth metal cations (Mg(2+) or Ca(2+)), or d-block metal cations (Zn(2+), Cu(+), Fe(2+), Fe(3+)), indicating a high selectivity for Cu(2+) over other biologically relevant metal ions. Moreover, the influence of common biological anions at physiological levels on the Cu(2+)-responsive contrast agent was also studied. Luminescence studies on the Eu counterpart Eu-QDOTAMA suggest that the enhancement in relaxivity for Gd-QDOTAMA in response to Cu(2+) is most likely due to the increased number of inner-sphere water molecules around Gd(3+) upon Cu(2+) binding to the 8-amidequinoline moiety. In vitro T(1)-weighted phantom images of Gd-QDOTAMA confirmed that signal intensity was markedly increased by the addition of equimolar amounts of Cu(2+).     

Ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural clinoptilolite: selectivity determination and influence of acidity on metal uptake

In the present study ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural Greek clinoptilolite was examined in terms of selectivity toward the above heavy metals in single- and multicomponent solutions in batch systems. Also examined are the influence of clinoptilolite on solution acidity and the effect of acidity on the ion exchange process. Clinoptilolite increases solution acidity due to the exchange of H(+) cations with the cations initially present in its structure. H(+) cations should be considered as competitive ones in ion exchange processes, and consequently ion exchange of metals is favored at high acidity values. Cu(2+) and Cr(3+) are the most sensitive cations with respect to acidity. Selectivity determination demonstrates that the selectivity at total concentration 0.01 N and acidity 2 in both single- and multicomponent solutions is following the order Pb(2+)>Fe(3+)>Cr(3+) > or =Cu(2+). This order is set since the first days of equilibration. However, Cu(2+) shows remarkable changes in selectivity and generally its uptake and selectivity are increasing with time. On the other hand selectivity in single metal solutions where acidity is not adjusted is following the order Pb(2+)>Cr(3+)>Fe(3+) congruent with Cu(2+).     

Rational design of a minimal size sensor array for metal ion detection

The focus of this study was to demonstrate that, in the luminescent sensors, the signal transduction may possibly be the most important part in the sensing process. Rational design of fluorescent sensor arrays for cations utilizing extended conjugated chromophores attached to 8-hydroxyquinoline is reported. All of the optical sensors utilized in the arrays comprise the same 8-hydroxyquinoline (8-HQ) receptor and various conjugated chromophores to yield a different response to various metal cations. This is because the conjugated chromophores attached to the receptor are partially quenched in their resting state, and upon the cation coordination by the 8-HQ, the resulting metalloquinolinolate complex displays a change in fluorescence. A delicate balance of conjugation, fluorescence enhancement, energy transfer, and a heavy metal quenching effect results in a fingerprint-like pattern of responses for each sensor-cation complex. Principal component analysis (PCA) and linear discriminant analysis (LDA) are used to demonstrate the contribution of individual sensors within the array, information that may be used to design sensor arrays with the smallest number of sensor elements. This approach allows discriminating between 10 cations by as few as two or even one sensor element. Examples of arrays comprising various numbers of sensor elements and their utility in qualitative identification of Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), and Ga(3+) ions are presented. A two-member array was found to identify 11 analytes with 100% accuracy. Also the best two of the sensors were tested alone and both were found to be able to discriminate among the samples with 99% and 96% accuracy, respectively. To illustrate the utility of this approach to a real-world application, identification of enhanced soft drinks based on their Ca(2+), Mg(2+), and Zn(2+) cation content was performed. The same approach to reducing array elements was used to construct three- and two-member arrays capable of identifying these complex analytes with 100% accuracy.     

A novel fluorescent sensor for metal cations and protons based of bis-1,8-naphthalimide

A newly synthesized bis-1,8-naphthalimide aimed to increase its fluorescence intensity in the presence of protons or metal cations has been investigated. Its spectral photophysical characteristics in acetonitrile and chloroform solutions are described. The influence of metal cations (Zn(2+), Ni(2+), Ce(3+), Co(2+), Cu(2+) and Ag(+)) and protons on the fluorescence intensity has been investigate with regard to obtain fluorescence sensors for this ions in the environment.     

Effect of metal ions (Li+, Na+, K+, Mg2+, Ca2+, Ni2+, Cu2+, and Zn2+) and water coordination on the structure and properties of L-arginine and zwitterionic L-arginine

Interactions between metal ions and amino acids are common both in solution and in the gas phase. The effect of metal ions and water on the structure of L-arginine is examined. The effects of metal ions (Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+)) and water on structures of Arg x M(H2O)m , m = 0, 1 complexes have been determined theoretically by employing the density functional theories (DFT) and using extended basis sets. Of the three stable complexes investigated, the relative stability of the gas-phase complexes computed with DFT methods (with the exception of K(+) systems) suggests metallic complexes of the neutral L-arginine to be the most stable species. The calculations of monohydrated systems show that even one water molecule has a profound effect on the relative stability of individual complexes. Proton dissociation enthalpies and Gibbs energies of arginine in the presence of the metal cations Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ni(2+), Cu(2+), and Zn(2+) were also computed. Its gas-phase acidity considerably increases upon chelation. Of the Lewis acids investigated, the strongest affinity to arginine is exhibited by the Cu(2+) cation. The computed Gibbs energies DeltaG(o) are negative, span a rather broad energy interval (from -150 to -1500 kJ/mol), and are appreciably lowered upon hydration.     

A new Schiff base system bearing two naphthalene groups as fluorescent chemodosimeter for Zn2+ ion and its logic gate behavior

1-((E)-(2-((2-nitrobenzyl)(2-((E)-(2-hydroxynaphthalen-1-yl)methyleneamino)ethyl)amino)ethylimino)methyl)naphthalen-2-ol (H(2)L), The new compound featuring two naphthalene units was synthesized and characterized. We find that H(2)L has high selectivity and sensitivity to detect Zn(2+) ion over other metal ions such as Na(+), Ag(+), Cd(2+), Co(2+), Cr(3+), Cu(2+), Hg(2+), Mn(2+), Ni(2+), Fe(3+), and the sensitivity is about 10(-7)M. The fluorescent changes of H(2)L upon the addition of cations Zn(2+) and triethylamine is utilized as an AND logic gate at the molecular level, using Zn(2+) and triethylamine as chemical inputs and the fluorescence intensity signal as output.     

An iron(III) selective dendrite chelator based on polyamidoamine dendrimer modified with 4-bromo-1,8-naphthalimide

A new 4-bromo-1,8-naphthalimide-labelled polyamidoamine (PAMAM) dendrimer from zero generation has been synthesised and characterised. Its functional characteristics, determined in acetonitrile solvent are discussed. The ability of the dendrimer to detect metal cations has been evaluated in acetonitrile by monitoring the quenching of the fluorescence intensity. Different metal cations have been tested Co(2+), Ni(2+), Cu(2+) and Fe(3+) for the purpose. The results have shown clearly that only Fe(3+) could be efficiently detected using the dendrimer.     

Structural and electronic characterization of the complexes obtained by the interaction between bare and hydrated first-row transition-metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) and glycine

The complexes formed by the simplest amino acid, glycine, with different bare and hydrated metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) were studied in the gas phase and in solvent in order to give better insight into the field of the metal ion-biological ligand interactions. The effects of the size and charge of each cation on the organization of the surrounding water molecules were analyzed. Results in the gas phase showed that the zwitterion of glycine is the form present in the most stable complexes of all ions and that it usually gives rise to an eta(2)O,O coordination type. After the addition of solvation sphere, a resulting octahedral arrangement was found around Ni(2+), Co(2+), and Fe(2+), ions in their high-spin states, whereas the bipyramidal-trigonal (Mn(2+) and Zn(2+)) or square-pyramidal (Cu(2+)) geometries were observed for the other metal species, according to glycine behaves as bi- or monodentate ligand. Despite the fact that the zwitterionic structure is in the ground conformation in solution, its complexes in water are less stable than those obtained from the canonical form. Binding energy values decrease in the order Cu(2+) > Ni(2+) > Zn(2+) approximately Co(2+) > Fe(2+) > Mn(2+) and Cu(2+) > Ni(2+) > Mn(2+) approximately Zn(2+) > Fe(2+) > Co(2+) for M(2+)-Gly and Gly-M(2+) (H(2)O)(n) complexes, respectively. The nature of the metal ion-ligand bonds was examined by using natural bond order and charge decomposition analyses.     

Self-assembling zeolite crystals into uniformly oriented layers

We report important progress made in the synthesis of oriented functional layers of nanochannel materials by using coordination chemistry as a tool. Zeolite L (ZL) crystals have been arranged into oriented layers through the coordinative interactions between a functional organic linker (L) and metal cations used for connecting the different parts. As organic linker we used a terpyridyl ligand bearing a urea group and a reactive siloxane part. Two strategies that lead to monolayers with different properties are described. The first consists of reacting the siloxane group of ligand L with OH groups of the substrate (S), and selectively reacting the siloxane group of L with OH groups located at the base of the ZL crystals. Next, metal cations M(n+), for example, Zn(2+) or Cu(2+), are coordinated to the terpy group on the modified substrate. To this the modified ZL is added and coordinatively bound by the terpy(Mn(n+))terpy interaction, leading to oriented ZL layers. The second method consists of reacting substrate S and ligand L in the presence of a metal cation. A layer with reactive siloxane groups is formed on S to which the ZL crystals are bound by the reaction of the hydroxyl groups of their base. Zn(2+), Cu(2+), and lanthanide ions Eu(3+) and Tb(3+)have been tested successfully, all of them leading to high-quality ZL monolayers with open channels, accessible for accepting guests, oriented perpendicularly with respect to the surface of S.     

Aqueous divalent metal-nitrate interactions: hydration versus ion pairing

Nitrate aqueous solutions, Mg(NO(3))(2), Ca(NO(3))(2), Sr(NO(3))(2), and Pb(NO(3))(2), are investigated using Raman spectroscopy and free energy profiles from molecular dynamics (MD) simulations. Analysis of the in-plane deformation, symmetric stretch, and asymmetric stretch vibrational modes of the nitrate ions reveal perturbation caused by the metal cations and hydrating water molecules. Results show that Pb(2+) has a strong tendency to form contact ion pairs with nitrate relative to Sr(2+), Ca(2+), and Mg(2+), and contact ion pair formation decreases with decreasing cation size and increasing cation charge density: Pb(2+) > Sr(2+) > Ca(2+) > Mg(2+). In the case of Mg(2+), the Mg(2+)-OH(2) intermolecular modes indicate strong hydration by water molecules and no contact ion pairing with nitrate. Free energy profiles provide evidence for the experimentally observed trend and clarification between solvent-separated, solvent-shared, and contact ion pairs, particularly for Mg(2+) relative to other cations.     

A highly selective fluorescence-based polymer sensor incorporating an (R,R)-salen moiety for Zn(2+) detection

A chiral polymer incorporating an (R,R)-salen moiety was synthesized by the polymerization of (R,R)-1,2-diaminocyclohexane with 2,5-dibutoxy-1,4-di(salicyclaldehyde)-1,4-diethynyl-benzene by a nucleophilic addition-elimination reaction. The fluorescence responses of the (R,R)-salen-based polymer toward various metal ions were investigated by fluorescence spectra. Compared with other cations, such as Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Hg(2+), and Pb(2+), Zn(2+) can lead to a pronounced fluorescence enhancement as high as 7.8-fold together with an obvious blue-shift change of the chiral polymer. More importantly, the fluorescent color of the polymer changed to bright blue instead of weak yellow after addition of Zn(2+), which can be easily detected by the naked eye. The results indicate that this kind of chiral polymer, incorporating an (R,R)-salen moiety as a receptor in the main chain backbone, can exhibit high sensitivity and selectivity for Zn(2+) recognition.