Detailed investigation of soot formation from jet fuel in a diffusion flame with comprehensive and hybrid chemical mechanisms

A numerical and experimental study is performed to investigate soot formation from jet fuel in a laminar coflow diffusion flame. The combustion chemistry of the fuel is simulated using (1) the MURI jet fuel surrogate (Dooley et al. 2012) with a modestly reduced Ranzi mechanism (Ranzi et al. 2012), and (2) the recently proposed HyChem model (Xu et al. 2018) combined with the KAUST PAH mechanism 2 (Wang et al. 2013). The two reaction mechanisms are coupled with a sectional soot model to simulate a coflow diffusion flame of methane doped with the MURI jet fuel surrogate. The combined laser extinction and two-angle elastic light scattering method is used to perform non-intrusive in situ measurements of soot volume fraction, primary particle diameter and number density. The good agreement including soot particle size and number density between the experimental data and the simulation results computed with the reduced Ranzi mechanism demonstrate the robustness of the soot model to changes in fuel composition, as the model parameters are unchanged with a previous numerical study of soot formation of n-propylbenzene/n-dodecane mixtures (Zhang and Thomson, 2018). The computation with the combined HyChem/KAUST mechanism predicts similar results as the computation with the detailed chemistry of the reduced Ranzi mechanism for fuel breakdown, thus the basic premise of the HyChem model that the fuel decomposition process can be greatly simplified with the lumped reaction steps is supported. The results also show that by adding a PAH growth scheme to the HyChem model, the approach can be used to predict soot formation from jet fuel combustion in a laminar coflow diffusion flame. Finally, the dependency of the soot prediction on PAH chemistry is discussed and it is suggested that more experimental data is needed to validate the PAH mechanism and improve the predictive accuracy of the model.     

Flow visualization of vortex structure in a pulsed rectangular jet

Pulsating jet is visualized using hydrogen bubble method to clarify the vortex nature in the near field of the jet. This study focused on the development in space and time of vortex structures evolution in low aspect-ratio rectangular jet with pulsation. Pulsation means large-amplitude, low-frequency excitation which is expected to increase the mixing and spreading of the jet and to accelerate its transition from a rectangular form to an axisymmetric form. It was deemed appropriate to investigate whether jet characteristics of a pulsating, submerged jet flow can be altered by including pulsations. The difference of the vortex deformation process is discussed in relation to pulsating conditions. Consequently, the pulsation leads to the formation of vortices at regular intervals, which are larger than those occurring in a steady jet. The results show that the streamwise interaction, between leading vortex and trailing vortex rolled up at nozzle lips, strengthens with increasing pulsating frequency. The spanwise drift of the vortex becomes strongly apparent at large amplitude and high frequency conditions. The drifting start position does not change regardless of pulsating condition. The convection velocity of vortex increases at lower frequency and larger amplitude.     

Visualization of dilute hydrogen jet flame in air flow

The structure of hydrogen jet flame diluted by CO₂ in air flow is studied by various visualization techniques, such as schlieren, direct photograph, tracer injection and reactive Mie scattering method, which allow understanding of the influence of CO₂ on the characteristics of the hydrogen jet flame. The experimental result indicates that the flame structure consists of laminar fuel jet and surrounding reaction zone near the nozzle exit. When the CO2 fraction is increased, the width of the fuel jet grows and the reaction zone is reduced in size. These observations are further confirmed by quantitative measurements of temperature and velocity fields in the flame, which are evaluated by thermocouple and particle image velocimetry (PIV), respectively. These results indicate that the flame temperature is decreased and the flow rate of the fuel jet is increased by the influence of diluents, which are due to the reduced calorific value and larger density of fuel, respectively.     

Identification and analysis of instability in non-premixed swirling flames using LES

Large eddy simulations (LES) of turbulent non-premixed swirling flames based on the Sydney swirl burner experiments under different flame characteristics are used to uncover the underlying instability modes responsible for the centre jet precession and large scale recirculation zone. The selected flame series known as SMH flames have a fuel mixture of methane-hydrogen (50:50 by volume). The LES solves the governing equations on a structured Cartesian grid using a finite volume method, with turbulence and combustion modelling based on the localised dynamic Smagorinsky model and the steady laminar flamelet model respectively. The LES results are validated against experimental measurements and overall the LES yields good qualitative and quantitative agreement with the experimental observations. Analysis showed that the LES predicted two types of instability modes near fuel jet region and bluff body stabilised recirculation zone region. The mode I instability defined as cyclic precession of a centre jet is identified using the time periodicity of the centre jet in flames SMH1 and SMH2 and the mode II instability defined as cyclic expansion and collapse of the recirculation zone is identified using the time periodicity of the recirculation zone in flame SMH3. Finally frequency spectra obtained from the LES are found to be in good agreement with the experimentally observed precession frequencies.     

Stability and emissions control using air injection and H2 addition in premixed combustion

We experimentally study lean premixed combustion stabilized behind a backward-facing step. For a propane–air mixture, the lean blowout limit is associated with strong pressure fluctuation arising simultaneously with strong flame–vortex interactions, which have been shown to constitute the mechanism of heat release dynamics in this flow. A high-speed air jet, issuing from a small slot and injected perpendicular to the main flow near the step, is used to disrupt this mechanism. For momentum ratio of jet to main flow below unity, the jet dilutes the mixture, further destabilizing the flame or leading to complete blowout. Above unity, the flame becomes more stable, and the pressure oscillations are suppressed. Flow visualization and OH*/CH* chemiluminescence measurements show that a strong jet produces a more compact flame that is less driven by the wake vortex, anchored closer to the step, and deflected upwards away from the lower wall of the channel. This renders the flame less vulnerable to heat loss and strong strains, which improves its stability and extends the flammability limit. Adding hydrogen to the main fuel improves the flame stability over the entire range of the air jet mass flow, with better results for momentum ratio larger than 1; H₂ pulls the flame further upstream, away from the shear zone and the unsteady vortex. NO_x emission benefits from the air jet, while, with H₂ addition, NO_x concentration is higher in the products as the overall burning temperature rises. However, hydrogen addition enables extending the flammability limit further by increasing air supply in the primary stream, hence achieving lower NO_x. The study suggests a simpler, almost passive, multi-objective combustion control technique and indicates that hydrogen addition can be a successful in situ approach for NO_x reduction.     

重力对扩散射流火焰动态特性的影响

本文探讨重力对扩散射流火焰动态特性的影响规律。结果表明,火焰闪烁现象是一种浮力诱导不稳定性,在浮力消失或反向重力场中,不存在这种不稳定性现象,闪烁频率与燃料射流速度无直接关系,但涡的大小随燃料射流速度的增大而增大。存在触发火焰闪烁的临界高度,闪烁频率与重力成平方根关系式。反向重力情况下,也存在浮力稳定型平面火焰,它反映了浮力与火焰的耦合作用。     

Dynamic behavior of diffusion flame interacting with a large-scale vortex by laser imaging techniques

Instantaneous and simultaneous measurements of two-dimensional temperature and OH-LIF profiles by combining Rayleigh scattering with laser induced fluorescence (LIF) were demonstrated in a nitrogen-diluted hydrogen (H₂ 30% + N₂ 70%) laminar normal diffusion flame interacting with a large-scale vortex by oscillating central fuel flow or in an inverse diffusion flame by oscillating central airflow. The dynamic behavior of the diffusion flame extinction and reignition during the flame–vortex interaction processes was investigated. The results obtained are described as follows. (1) The width of the reaction zone decreases remarkably, and a decrease in flame temperature and OH-LIF is seen with increasing central airflow in an inverse diffusion flame. OH-LIF increases, and temperature does not change with increasing central fuel flow in a normal diffusion flame. The computations predict the experimental results well, and it is revealed that flame temperature characteristics result from the preferential diffusion of heat and species, which induces excess enthalpy or on enthalpy deficit, and an increase or decrease in H₂ mole fraction in the flame. (2) When a large velocity fluctuation is given to the central flow, the temperature and the OH-LIF at the reaction zone become thin at the convex and circumferential part of the vortex where a high temperature layer exists, and the temperature at the reaction zone is lowered in the inverse flame and the normal flame. (3) The width and temperature of the reaction zone interacting with the vortex recover quickly to that of the laminar steady flame after the vortex passing in the normal flame, but the recovery to that of the steady flame after the vortex passing is delayed in the inverse flame. (4) When a remarkably large velocity fluctuation is given to the central airflow in the inverse flame, thinning of temperature and reaction zone starts at the convex and circumferential part of the vortex, resulting in a and flame extinction completely occurs at the tail part of the vortex and makes the pair of edge flames. The outside edge flame reignites and connects with the upstream reaction zone. The inside edge flame finally extinguishes as the supply of fuel is interrupted by the outside edge flame.     

On the oscillating flame characteristics in nonpremixed laminar coflow-jets: An experimental and numerical study

This study investigates the characteristics of oscillating lifted flames in laminar coflow-jets experimentally and numerically by varying both fuel density (by varying propane and n-butane mixtures) and coflow density (by diluting air with N₂/He mixtures). Two different lifted flame oscillation behaviors are observed depending on these parameters: oscillating tribrachial lifted flame (OTLF) and oscillating mode-change lifted flame (OMLF), where a rapid increase in flame radius is observed. The regimes of the two flames are identified from experiments, which shows that OMLF occurs only when the effect of the negative buoyancy on the flow field by the fuel heavier than air becomes significant at low fuel jet velocity. OMLFs are also identified to distinguish OTLF regime from flame extinction, which implies that an OMLF can be extinguished when the positive buoyancy becomes weak, losing its stabilizing effect, or when the negative buoyancy becomes strong, further enhancing its destabilizing effect. Transient numerical simulations of both OTLF and OMLF reveal that the OMLF occurs by a strong toroidal vortex and a subsequent counterflow-like structure induced by relatively-strong negative buoyancy. Such a drastic flow redirection significantly changes the fuel concentration gradient such that the OMLF changes its mode from a tribrachial flame mode (decreasing edge speed with fuel concentration gradient) to the premixed flame-like transition mode when the fuel concentration gradient becomes very small (increasing edge speed with fuel concentration gradient). Again, a tribrachial flame mode is recovered during a rising period of flame edge and repeats an oscillation cycle.     

浮力对矩形射流扩散火焰影响的大涡模拟

本文对浮力作用下的矩形射流扩散燃烧过程进行了三维大涡模拟。数值模拟结果展示了浮力作用下矩形射流扩散火焰的动态弯曲过程,比较分析了射流速度对火焰刚性的影响,发现射流速度越高火焰弯曲程度越小、燃料喷射距离越远。对浮力作用下的水平射流横截面流动分析结果表明,由于流向涡的卷吸作用在局部区域存在逆着浮力方向的流动。     

Transient and steady-state behavior of auto-igniting propane and dimethyl ether fuel jets in high-temperature vitiated coflows

In the current study, the auto-ignition dynamics of cold fuel jets issuing into a high-temperature, vitiated environments is investigated. Due to the short time scale of these events, high-speed measurements are used to resolve the coupled spatio-temporal behavior. The present study uses high-speed (20-kHz) OH* chemiluminescence imaging to identify the location and timing of the formation of the initial ignition kernels, providing visualization of the ignition dynamics and a detailed statistical evaluation of ignition heights and ignition delay times across a broad parameter space which includes variations in fuel type, dilution levels, coflow temperature, and coflow oxidizer content. The auto-ignition location and ignition delay times show a strong sensitivity to coflow temperature with increased sensitivities at lower coflow temperatures. Comparisons between kernel formation location for the transient jet and the fluctuating flame base of the subsequent, steady-state flame is presented, highlighting the role of flame propagation on flame stabilization. Results indicate that at lower temperatures the flame stabilization mechanism is dominated by auto-ignition, but at higher coflow temperatures, flame propagation plays a key role. The effects of variations in the hot, coflow oxidizer content on ignition properties were found to be noticeable, but still significantly less than variations in the temperature.     

Characteristics and structure of inverse flames of natural gas

Characteristics and structure of nominally non-premixed flames of natural gas are investigated using a burner that employs simultaneously two distinct features: fuel and oxidiser direct injection, and inverse fuel and oxidiser delivery. At low exit velocities, the result is an inverse diffusion flame that has been noted in the past for its low NO_x emissions, soot luminosity, and narrow stability limits. The present study aimed at extending the burner operating range, and it demonstrated that the inverse flame exhibits a varying degree of partial premixing dependent on the discharge nozzle conditions and the ratio of inner air jet and outer fuel jet velocities. These two variables affect the flame length, temperature distributions, and stability limits. Temperature measurements and Schlieren visualisation show areas of enhanced turbulent mixing in the shear region and the presence of a well-mixed reaction zone on the flame centreline. This reaction zone is enveloped by an outer diffusion flame, yielding a unique double-flame structure. As the fuel–air equivalence ratio is decreasing with an increase in the inner jet velocity, the well-mixed reaction zone extends considerably. These findings suggest a method for establishing a flame of uniform high temperature by optimising the coaxial nozzle geometry and flow conditions. The normalised flame length is decreasing exponentially with the air/fuel velocity ratio. Measurements demonstrate that the inverse flame stability limits change qualitatively with varying degree of partial premixing. At the low premixing level, the flame blow-out is a function of the inner and outer jet velocities and the nozzle conditions. The flame blow-out at high degree of partial premixing occurs abruptly at a single value of the inner air jet velocity, regardless of the fuel jet velocity and almost independent of the discharge nozzle conditions.     

Large Eddy Simulation of flame stabilisation dynamics and vortex control in a lifted H2/N2 jet flame

Flame stabilisation in (highly) preheated mixture is common in several industrial applications. When the reactants are injected separately in the device (usually at high-speed), the flame is lifted so that the fuel and oxidant first mix to give an ignitable mixture. If the temperature of the mixture is adequate, it auto-ignites stabilizing the flame. Here we focus on an academic lifted jet flame and Large Eddy Simulation (LES) is used to capture the flame and auto-ignition dynamics. Comparisons with experimental data show that LES simulates accurately high OH fluctuation levels at the stabilisation location. The vortex dynamics linked to these fluctuations is analyzed and it is found that small scale coherent structures play a vital role in the auto-ignition process. These structures are axial vorticity tubes (braids) and are located relatively far (in the radial direction) from the shear-layer. As a consequence, the lift-off height varies dramatically in time leading to OH fluctuations of the order of the mean OH concentration. This scenario is monitored in the compositional space highlighting the simultaneous evolution of OH, HO ₂ and temperature. Further, different strategies for open-loop control of the flame lift-off height are tested. In order to anchor the flame at different positions downstream of the nozzle, the vortex dynamics in the shear-layer was modified. Promoting successively vortex ring and braids, the auto-ignition region was moved significantly. In particular, modified nozzle geometries impacted the formation of braids and ensured a good premixing very close to the nozzle. As a consequence, it was possible to reduce significantly the lift-off height and stabilise the flame few diameters downstream of the nozzle.     

Shear Layer Dynamics in a Reacting Jet in Crossflow

This study explores the effect of heat release on the growth of the shear layer vortical structures in a reacting jet in crossflow. Jets composed of mixtures of hydrogen, helium and nitrogen were used to independently vary the momentum flux ratio (J), jet to crossflow density ratio (S) and heat release. Velocity fields were obtained from 10?kHz high-speed stereoscopic particle image velocimetry (SPIV) and regions of elevated temperature/combustion products from simultaneous OH planar laser induced fluorescence (OH-PLIF). The shear layer vortices (SLV) originating from instabilities in the windward and leeward shear layers were identified using vortex identification indicator functions in order to track their spatial location and strength. The results show that the asymmetries in shear layer strength between the windward and leeward shear layers are dependent primarily on J, for both reacting and non-reacting flow-fields. The SLV growth rate dependencies on J and S is found to match trends noted by previous studies for non-reacting jets, where SLV growth rates increase with degree of global instability of the JICF. Heat release is also shown to suppress the SLV growth rates relative to non-reacting cases with the same jet parameters. Related to this point, the degree of lifting of the flame also has a significant impact on SLV growth. As flame lifting is directly related to autoignition times, this point shows strong coupling between kinetic rates and jet hydrodynamic stability.     

A computational study of soot formation and flame structure of coflow laminar methane/air diffusion flames under microgravity and normal gravity

A numerical study is conducted of methane–air coflow diffusion flames at microgravity (μg) and normal gravity (1g), and comparisons are made with experimental data in the literature. The model employed uses a detailed gas phase chemical kinetic mechanism that includes PAH formation and growth, and is coupled to a sectional soot particle dynamics model. The model is able to accurately predict the trends observed experimentally with reduction of gravity without any tuning of the model for different flames. The microgravity sooting flames were found to have lower temperatures and higher volume fraction than their normal gravity counterparts. In the absence of gravity, the flame radii increase due to elimination of buoyance forces and reduction of flow velocity, which is consistent with experimental observations. Soot formation along the wings is seen to be surface growth dominated, while PAH condensation plays a more major role on centreline soot formation. Surface growth and PAH growth increase in microgravity primarily due to increases in the residence time inside the flame. The rate of increase of surface growth is more significant compared to PAH growth, which causes soot distribution to shift from the centreline of the flame to the wings in microgravity.     

Mechanism on oscillating lifted flames in nonpremixed laminar coflow jets

The oscillating lifted flame in a laminar nonpremixed nitrogen-diluted fuel jet is known to be a result of buoyancy, though the detailed physical mechanism of the initiation has not yet been properly addressed. We designed a systematic experiment to test the hypothesis that the oscillation is driven by competition between the positive buoyancy of flame and the negative buoyancy of a fuel stream heavier than the ambient air. The positive buoyancy was examined with various flame temperatures by changing fuel mole fraction, and the negative buoyancy was investigated with various fuel densities. The density of the coflow was also varied within a certain range by adding either helium or carbon dioxide to air, to study how it affected the positive and negative buoyancies at the same time. As a result, we found that the range of oscillation was well-correlated with the positive and the negative buoyancies; the former stabilized the oscillation while the latter triggered instability and became a source of the oscillation. Further measurements of the flow fields and OH radicals evidenced the important role of the negative buoyancy on the oscillation, detailing a periodic variation in the unburned flow velocity that affected the displacement of the flame.     

Experimental research on flame revolution and precession of fire whirls

This paper presents the first experimental effort to explore the large scale 3-D flame instabilities of fire whirls, including the inclined flame revolution during the transition from a general pool fire to fire whirl, and the swirling flame precession in a quasi-steady fire whirl. The experimental medium-scale fire whirls were produced by a fixed-frame facility. Experimental observations indicate that flame revolution is an important flame instability during the formation of fire whirl, showing that the entire flame is inclined and revolves around the geometrical axis of symmetry with increasing angular velocity until the critical point, without the self-rotation of the flame. It is found that the inlet velocity fluctuates synchronously with the flame revolution. As soon as the fire whirl forms, the erect swirling flame starts to precess around the geometrical axis of symmetry. Analysis indicates that during flame precession the periodic fluctuations of inlet velocity disappear and a local annular external recirculation zone (ERZ) is produced outside the flame (vortex core), while the flow is upward inside. It is found that the inlet velocities are nearly constant within the continuous flame in order to maintain a stable generating eddy. A good linear correlation exists between the average inlet velocities and average ambient circulations for all fuel pan sizes. The precession frequency is relatively stable during one test. The frequencies of flame revolution and precession are both proportional to the average inlet velocity, and the corresponding Strouhal numbers are constants of 0.42 and 0.80, respectively. The flame revolves and precesses in the same direction as the self-rotation of the fire whirl flame in all tests. The flame revolution is related to the periodical fluctuations of inlet flow, while the flame precession is considered to be linked to the occurrence of ERZ in fire whirls.     

Formation of coherent structures at interaction between an impact jet and a flow reflected from an obstacle

The results of experimental research on interaction between an axisymmetric underexpanded jet and obstacles of various shapes (the plane one and in the form of a cylindrical cavity) are presented. It is found that a cavity provides formation of a reverse flow, whose interaction with a jet causes formation of the vortex spiral structures.     

Visualization of concentration field in a vortex ring using acetone PLIF

To improve the understanding of flame propagation through a nonpremixed vortex ring, the characteristics of fuel concentration in a vortex ring have been investigated experimentally. The vortex ring was generated by the ejection of propane with a single stroke motion of a speaker. Planar laser-induced fluorescence (PLIF) technique was adopted by seeding acetone as a tracer to fuel stream, in which the PLIF signal intensity is directly proportional to the concentration of acetone. This technique provides non-intrusive and instantaneous measurement of concentration field. Results showed that fuel concentration and its gradient decreased with the evolution of a vortex ring. When a nonpremixed flame propagated through a vortex ring, the flame location coincides with the inner most spiral mixing layer of fuel and air in a vortex ring.     

Flow-field dynamics of the non-reacting and reacting jet in a vitiated cross-flow

The dynamics of a premixed ethylene-air jet injected transverse to a vitiated cross-flow were investigated using high-repetition rate particle image velocimetry (PIV). Both non-reacting and reacting jets were found to be characterized by a dominant frequency associated with the jet wake vortex system. For the isothermal jet, increasing the momentum flux ratio (J) has only a slight effect on the frequency of the oscillation but significantly increases its magnitude. The reacting jet was found to exhibit different behavior, with a monotonic increase in the dominant frequency with J. The jet equivalence ratio (?_j) was found to have little effect on the rate of wake vortex shedding but affects the overall magnitude of the oscillation. Comparison with data reported in the literature suggests the relationship between the wake Strouhal number (St_w) and J is fuel dependent. Application of a vortex detection algorithm shows a stark difference in the location of the wake vortices under non-reacting and reacting conditions. Under isothermal conditions, the vortices are found close to the jet centerline and dissipate relatively quickly. Reaction confines the vortices to a narrow shear layer until a farther distance downstream and the vortices convect through the entire area of interest. Additionally, the vortex circulation strength was found to increase with J. Proper orthogonal decomposition (POD) analysis of the non-reacting and reacting jets demonstrates the dominance of the wake vortex structures in the oscillating flow fields. In both cases, the temporal information extracted from the most energetic modes is identical to the dominant frequencies measured in the flow fields. The primary effect of heat release is to reduce the overall amount of coherence and to delay the appearance of elevated coherence levels until a larger streamwise distance from the jet exit.     

Impact of turbulence on flame brush development of acoustically excited rod-stabilized flames

Coherent structures, such as those arising from hydrodynamic instabilities or excited by thermoacoustic oscillations, can significantly impact flame structure and, consequently, the nature of heat release. The focus of this work is to study how coherent oscillations of varying amplitudes can impact the growth of the flame brush in a bluff-body stabilized flame and how this impact is influenced by the free stream turbulence intensity of the flow approaching the bluff body. We do this by providing external acoustic excitation at the natural frequency of vortex shedding to simulate a highly-coupled thermoacoustic instability, and we vary the in-flow turbulence intensity using perforated plates upstream of the flame. We use high-speed stereoscopic particle image velocimetry to obtain the three-component velocity field and we use the Mie-scattering images to quantify the behavior of the flame edge. Our results show that in the low-turbulence conditions, presence of high-amplitude acoustic excitation can cause the flame brush to exhibit a step-function growth, indicating that the presence of strong vortical structures close to the flame can suppress flame brush growth. This impact is strongly dependent on the in-flow turbulence intensity and the flame brush development in conditions with higher levels of in-flow turbulence are minimally impacted by increasing amplitudes of acoustic excitation. These findings suggest that the sensitivity of the flow and flame to high-amplitude coherent oscillations is a strong function of the in-flow turbulence intensity.