Development of a Ruthenium(II) Complex Based Luminescent Probe for Imaging Nitric Oxide Production in Living Cells

A unique ruthenium(II) complex, bis(2,2′‐bipyridine)(4‐(3,4‐diaminophenoxy)‐2,2′‐bipyridine)ruthenium(II) hexafluorophosphate ([(Ru(bpy)₂(dabpy)][PF₆]₂), has been designed and synthesized as a highly sensitive and selective luminescence probe for the imaging of nitric oxide (NO) production in living cells. The complex can specifically react with NO in aqueous buffers under aerobic conditions to yield its triazole derivative with a high reaction rate constant at the 10¹⁰ M ^?1 s^?1 level; this reaction is accompanied by a remarkable increase of the luminescence quantum yield from 0.13 to 2.2 %. Compared with organic probes, the new Ru^II complex probe shows the advantages of a large Stokes shift (>150 nm), water solubility, and a wide pH‐availability range (pH independent at pH>5). In addition, it was found that the new probe could be easily transferred into both living animal cells and plant cells by the coincubation method, whereas the triazole derivative was cell‐membrane impermeable. The probe was successfully used for luminescence‐imaging detection of the exogenous NO in mouse macrophage cells and endogenous NO in gardenia cells. The results demonstrated the efficacy and advantages of the new probe for NO detection in living cells.     

Development of a heterobimetallic Ru(II)-Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions

A heterobimetallic ruthenium(II)-copper(II) complex-based luminescent chemosensor, [Ru(bpy)(2)(bpy-DPA)Cu](4+) (bpy: 2,2'-bipyridine; bpy-DAP: 4-methyl-4'-[N,N-bis(2-picolyl)amino-methylene]-2,2'-bipydine), has been designed and synthesized for the highly selective and sensitive recognition and detection of sulfide anions in 100% aqueous solutions. Owing to the high affinity of sulfide to Cu(II), the non-luminescent chemosensor can specifically and rapidly react with sulfide to yield the corresponding ruthenium(II) complex, [Ru(bpy)(2)(bpy-DPA)](2+), accompanied by the remarkable luminescence enhancement. The dose-dependent luminescence enhancement of the sensor shows a good linearity with a detection limit of 20.7 nM for sulfide anions. The novel luminescence sensor has a widely available pH range from 4.5 to 10 and an excellent response selectivity to sulfide only even in the presence of various other anions. Based on this chemosensor, a rapid, selective and sensitive luminescence method for the detection of sulfide anions in wastewater samples was established. The coefficient variations (CVs) of the method are less than 3.1%, and the recoveries are in the range of 90.9-108.5%.     

Highly sensitive and simple fluorescence staining of proteins in sodium dodecyl sulfate-polyacrylamide-based gels by using hydrophobic tail-mediated enhancement of fluorescein luminescence

Fluorescein has an extremely low luminescence intensity in acidic aqueous media. However, when it was bound to proteins, subsequent increase of luminescence intensity took place. Furthermore, when a hydrophobic tail, such as aliphatic hydrocarbons, was introduced to fluorescein, more dramatic increase of luminescence intensity was observed upon binding to proteins. In the present study, by utilizing this luminescence enhancement, three hydrophobic fluorescein dyes (5-dodecanoyl amino fluorescein, 5-hexadecanoyl amino fluorescein, and 5-octadecanoyl amino fluorescein) were examined as noncovalent fluorescent stains of protein bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Effective incorporation of the dyes to proteins in gels was accomplished either simply by adding dyes at the protein fixation step, or by treating gels with a staining solution after the fixation. The sensitivity of this staining method using the fluorescein derivatives was approximately 1 ng/band for most proteins. For some cases, protein bands containing as low as 0.1 ng were successfully visualized. In addition, the detection sensitivity showed much less protein-to-protein variation than silver staining. This new staining method was also successfully applied to two-dimensional electrophoresis of rat brain proteins. Its overall sensitivity was comparable to that of silver staining.     

Zn(2+) Responsive Bimodal Magnetic Resonance Imaging and Fluorescent Imaging Probe Based on a Gadolinium(III) Complex

A Zn(2+)-responsive bimodal magnetic resonance imaging (MRI) and luminescence imaging probe GdL was synthesized. The relaxivity and luminescence properties were examined. In the presence of 0.5 equiv of Zn(2+), the longitudinal relaxivity is increased from 3.8 mM(-1) s(-1) to 5.9 mM(-1) s(-1) at 23 MHz and 25 °C with 55% enhancement, whereas the fluorescence exhibits a 7-fold increase. The Zn(2+) responsive imaging probe shows favorable selectivity and tolerance over a variety of biologically relevant anions and metal ions in physiological pH range for both relaxivity and luminescence. In vitro phantom images and confocal fluorescence images in living cells show that the bimodal Zn(2+) probe can effectively enhance T(1)-weighted imaging contrast and luminescence imaging effect through Zn(2+) coordination with excellent cellmembrane permeability and biocompatibility. Spectral and electrospray ionization mass spectrometry (ESI-MS) studies indicate that two different Zn(2+)-bound species, (GdL)(2)Zn and GdLZn, are formed when 0.5 and 1 equiv of Zn(2+) are bound to GdL complex, respectively. Crystal structural determination and dysprosium-induced (17)O NMR shift (DIS) experiment demonstrate that the increased molecular weight and the improved molecular rigidity upon complexation of Zn(2+) with GdL is the primary factor for relaxivity enhancement. Significant enhancement of the luminescence is due to a heavy atom effect and much increased molecular rigidity upon Zn(2+) binding to 8-sulfonamidoquinoline chromophore.     

A europium(III) complex as an efficient singlet oxygen luminescence probe

A new europium(III) complex, [4'-(10-methyl-9-anthryl)-2,2':6',2"-terpyridine-6,6"-diyl]bis(methylenenitrilo) tetrakis(acetate)-Eu(3+), was designed and synthesized as a highly sensitive and selective time-gated luminescence probe for singlet oxygen ((1)O2). The new probe is highly water soluble with a large stability constant of approximately 10(21) and a wide pH available range (pH 3-10), and can specifically react with (1)O2 to form its endoperoxide (EP-MTTA-Eu(3+)) with a high reaction rate constant at 10(10) M(-1) s(-1), accompanied by the remarkable increases of luminescence quantum yield from 0.90% to 13.8% and lifetime from 0.80 to 1.29 ms, respectively. The wide applicability of the probe was demonstrated by detection of (1)O2 generated from a MoO(4)(2-)/H(2)O2 system, a photosensitization system of 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin tetra(p-toluenesulfonate) (TMPyP), and a horseradish peroxidase catalyzed aerobic oxidation system of indole-3-acetic acid (IAA). In addition, it was found that the new probe could be easily transferred into living HeLa cells by incubation with TMPyP. A time-gated luminescence imaging technique that can fully eliminate the short-lived background fluorescence from TMPyP and cell components has been successfully developed for monitoring the time-dependent generation of (1)O2 in living cells.     

Bi-1,10-phenanthrolines and their mononuclear Ru(II) complexes

A series of four biphen (phen = 1,10-phenanthroline) ligands, 2,2'-biphen (1), 3,3'-biphen (2), 2,2'-dimethylene-3,3'-biphen (3), and 2,3'-dimethylene-3,2'-biphen (4), is prepared by coupling and Friedl?nder methodology. The corresponding mononuclear Ru(II) complexes, [Ru(1-4)(Mebpy)(2)](2+) where Mebpy = 4,4'-dimethyl-2,2'-bipyridine, are prepared. These complexes show long wavelength electronic absorptions at 441-452 nm and emissions at 622-641 nm. Metal-based oxidations occur in the range 1.18-1.21 V, and ligand-based reductions, at -1.20 to -1.30 V. The addition of Zn(2+), Cd(2+), or Hg(2+) ions results in a strong enhancement and red shift of the luminescence of complex Ru-3. Alkali and alkaline earth metal ions barely affect the luminescence of Ru-3 while transition metal ions such as Co(2+), Cu(2+), Ni(2+), and Mn(2+) lead to efficient quenching of the Ru-3 luminescence. The luminescence of Ru-2 and Ru-4 is quenched in the presence of Zn(2+) because of a conformationally induced reduction in electronic communication between the two phen halves of the ligand. The addition of Zn(2+) has only a slight effect on the luminescence of Ru-1 because of steric hindrance toward complexation.     

Pressure-induced enhancements of luminescence intensities and lifetimes correlated with emitting-state distortions for thiocyanate and selenocyanate complexes of platinum(II) and palladium(II)

The luminescence properties of thiocyanate and selenocyanate platinum(II) and palladium(II) complexes show strong variations with temperature and pressure. The d-d luminescence band maxima for [Pt(SCN)(4)](PPh(4))(2) (1), [Pt(SCN)(4)](n-Bu(4)N)(2) (2), and [Pt(SeCN)(4)](n-Bu(4)N)(2) (4) complexes are centered at ca. 14500 cm(-1) whereas those of the [Pd(SCN)(4)](n-Bu(4)N)(2) (3) and [Pd(SeCN)(4)](n-Bu(4)N)(2) (5) complexes are approximately 2000 cm(-1) lower in energy. Low-temperature luminescence spectra from single-crystal samples have broad bands with highly resolved vibronic structure indicating large displacements of the emitting-state potential energy minimum along several metal-ligand normal coordinates. The largest displacements involve the totally symmetric (a(1g)) stretching modes with frequencies of 295 cm(-1) (1), 303 cm(-1) (2), 274 cm(-1) (3), 195 cm(-1) (4), and 185 cm(-1) (5). The lower frequencies of these dominant progression-forming modes for the selenocyanate complexes lead to luminescence bands that are narrower by ca. 500 cm(-1) (fwhm) than those observed from the thiocyanate complexes. Under external pressures, the room-temperature luminescence intensities and lifetimes show considerable enhancement at pressures up to 40 kbar. This effect is largest for the palladium(II) complexes with lifetimes increasing from approximately 350 ns at ambient pressure up to 62 micros at 30 kbar, an increase by more than 2 orders of magnitude. The platinum(II) complexes exhibit a significant, but noticeably lesser increase of luminescence lifetimes and intensities with increasing pressure. The temperature- and pressure-dependent luminescence decay behavior is rationalized using the emitting-state molecular geometry determined from the resolved low-temperature luminescence spectra combined with the strong-coupling limit of radiationless decay theory.     

Coordination properties of a diarylaza crown ether appended with a luminescent [Ru(bipy)3]2+ unit

The [Ru(bipy)(2)(1)](PF(6))(2) (bipy refers to 2,2'-bipyridine) complex, comprising a ruthenium(II) tris(2,2'-bipyridine) luminophore covalently linked to a di[(o-triethyleneglycoxy)phenyl]amine crown ether 1, has been synthesized and fully characterized. The photophysical properties of this metal complex have been examined in solution at ambient temperature. Luminescence from the metal complex is enhanced significantly in the presence of various adventitious cations, including protons. In particular, Li(+) cations bind to the crown ether, as evidenced by (1)H NMR and luminescence spectroscopy. Cation binding serves to decrease the rate of reductive quenching of the triplet state of the metal complex, thereby increasing the extent of luminescence. The solution-phase conformation of [Ru(bipy)(2)(1)](PF(6))(2), with and without encapsulated Li(+), has been examined by 2-D NMR and by molecular dynamics simulations.     

Organic vapor triggered repeatable on-off crystalline-state luminescence switching

A nonporous crystalline solid consisting of an organoarsenic platinum(II) complex, i.e., a mononuclear diiodoplatinum(II) complex trans-PtI(2)(cis-DHDAtBu)(2) (1) with cis-1,4-dihydro-1,4-dimethyl-2,3,5,6-tetrakis(tert-butoxycarbonyl)-1,4-diarsinine (cis-DHDAtBu), shows on-off solid-state luminescence switching through reversible solvent vapor uptake and escape. The on-off switching of solid-state luminescence was achieved without changing the structure or electronic state of the organoarsenic platinum(II) complex.     

Luminescent properties of dye-PMMA composite nanospheres

The luminescent properties of two types of dye-poly(methyl methacrylate) (PMMA) composite nanospheres were discussed and compared. Dye molecules (Ru(bpy)(3)Cl(2)) were combined with PMMA nanospheres in two strategies: embedding dye molecules during PMMA nanosphere formation (Em-PMMA NPs) and adsorbing dye molecules onto the surface of the produced PMMA nanospheres (Ad-PMMA NPs). It has been proved that the electrostatic interaction dominated the load of Ru(bpy)(3)(2+) on the PMMA matrix. The luminescence intensity of the Em-PMMA NPs was much higher than that of the Ad-PMMA NPs under same dye concentration due to different dye load distribution in two types of dye-PMMA composite nanospheres. Luminescence lifetime measurement of Ru(bpy)(3)(2+) in the Em-PMMA NPs (containing 2.20 × 10(3) Ru(bpy)(3)(2+) molecules per NP) indicates that ～60% of dye molecules loaded in inside of the PMMA matrix and ～40% located close to/on the surface of NPs. For the Ad-PMMA NPs containing same amount of dye as Em-PMMA Nps, most of dye molecules (～84%) were on the surface of NPs and only ～16% of them penetrated into the PMMA matrix. The luminescence of the Em-PMMA NPs had nearly seven fold enhancement and the excited-state lifetime had nearly five fold extension relative to a dye aqueous solution. The mechanism of luminescence enhancement was studied. The results indicate that the larger viscosity and weaker polarity of a PMMA matrix led to the luminescence enhancement of Ru(bpy)(3)(2+). These luminescent PMMA nanospheres with high stability, long lifetime and high brightness hold great the potential for being a novel biological label.     

Direct ion exchange of tris(2,2'-bipyridine)ruthenium(II) into an alpha-zirconium phosphate framework

The first direct ion exchange of a luminescent metal complex into an alpha-zirconium phosphate framework has been accomplished. A hydrated form of alpha-ZrP, with an expanded 10.3 A interlayer distance, has been used for the intercalation of Ru(bpy)(3)(2+), resulting in further expansion to 15.2 A. The Ru(bpy)(3)(2+) luminescence band is slightly blue-shifted. High Ru(bpy)(3)(2+) loadings lead to luminescence self-quenching.     

The time domain in co-stained cell imaging: time-resolved emission imaging microscopy using a protonatable luminescent iridium complex

The intense luminescence of the new complex Ir(ppy)(2)(pybz) (1) within the cytoplasm of live cells can be discriminated from the fluorescence of an organic stain, solely on the basis of the emission timescale {pybzH = 2-pyridyl-benzimidazole}. The protonated form of 1 displays red-shifted emission, and may be implicated in a superior uptake compared to Ir(ppy)(3).     

Highly luminescent, triple- and quadruple-stranded, dinuclear Eu, Nd, and Sm(III) lanthanide complexes based on bis-diketonate ligands

The bis(beta-diketone) ligands 1,3-bis(3-phenyl-3-oxopropanoyl)benzene, H(2)L(1) and 1,3-bis(3-phenyl-3-oxopropanoyl) 5-ethoxy-benzene, H(2)L(2), have been prepared for the examination of dinuclear lanthanide complex formation and investigation of their properties as sensitizers for lanthanide luminescence. The ligands bear two conjugated diketonate binding sites linked by a 1,3-phenylene spacer. The ligands bind to lanthanide(III) or yttrium(III) ions to form neutral homodimetallic triple stranded complexes [M(2)L(1)(3)] where M = Eu, Nd, Sm, Y, Gd and [M(2)L(2)(3)], where M = Eu, Nd or anionic quadruple-stranded dinuclear lanthanide units, [Eu(2)L(1)(4)](2-). The crystal structure of the free ligand H(2)L(1) has been determined and shows a twisted arrangement of the two binding sites around the 1,3-phenylene spacer. The dinuclear complexes have been isolated and fully characterized. Detailed NMR investigations of the complexes confirm the formation of a single complex species, with high symmetry; the complexes show clear proton patterns with chemical shifts of a wide range due to the lanthanide paramagnetism. Addition of Pirkle's reagent to solutions of the complexes leads to splitting of the peaks, confirming the chiral nature of the complexes. Electrospray and MALDI mass spectrometry have been used to identify complex formulation and characteristic isotope patterns for the different lanthanide complexes have been obtained. The complexes have high molar absorption coefficients (around 13 x 10(4) M(-1)cm(-1)) and display strong visible (red or pink) or NIR luminescence upon irradiation at the ligand band around 350 nm, depending on the choice of the lanthanide. Emission quantum yield experiments have been performed and the luminescence signals of the dinuclear complexes have been found to be up to 11 times more intense than the luminescence signals of the mononuclear analogues. The emission quantum yields and the luminescence lifetimes are determined to be 5% and 220 micros for [Eu(2)L(1)(3)], 0.16% and 13 micros for [Sm(2)L(1)(3)], and 0.6% and 1.5 micros for [Nd(2)L(1)(3)]. The energy level of the ligand triplet state was determined from the 77 K spectrum of [Gd(2)L(1)(3)]. The bis-diketonate ligand is shown to be an efficient sensitizer, particularly for Sm and Nd. Photophysical studies of the europium complexes at room temperature and 77 K show the presence of a thermally activated deactivation pathway, which we attribute to ligand-to-metal charge transfer (LMCT). Quenching of the luminescence from this level seems to be operational for the Eu(III) complex but not for complexes of Sm(III) and Nd(III), which exhibit long lifetimes. The quadruple-stranded europium complex has been isolated and characterized as the piperidinium salt of [Eu(2)L(1)(4)](2-). Compared with the triple-stranded Eu(III) complex in the solid state, the quadruple-stranded complex displays a more intense emission signal with a distinct emission pattern indicating the higher symmetry of the quadruple-stranded complex.     

Selective recognition of monohydrogen phosphate by fluorescence enhancement of a new cerium complex

Bis(8-hydroxy quinoline-5-solphonate) cerium(III) chloride (Ce(QS)(2)Cl) (L) was synthesized and then used as a novel fluorescent sensor for anion recognition. Preliminarily study showed that fluorescence of L enhanced selectively in the presence of HPO(4)(2-) ion. This enhancement is attributed to a 1:1 complex formation between L and HPO(4)(2-) anion. The association constant of 1:1 complex of L-HPO(4)(2-) was calculated as 3.0×10(6). Thus, L was utilized as a basis for a selective detection of HPO(4)(2-) anion in solution. The linear response range of the proposed fluorescent chemo-sensor covers a concentration range of HPO(4)(2-) from 3.3×10(-7) to 5.0×10(-6) mol L(-1) with a detection limit of 2.5×10(-8) mol L(-1). L showed selective and sensitive fluorescence enhancement response toward HPO(4)(2-) ion in comparison with I(3)(-), NO(3)(-), CN(-), CO(3)(2-), Br(-), Cl(-), F(-), H(2)PO(4)(-) and SO(4)(2-) ions. It was probably attributed to the higher stability of the inorganic complex between HPO(4)(2-) ion and L. The method was successfully applied for analysis of phosphate ions in some fertilizers samples.     

PtII Complexes with 6‐(5‐Trifluoromethyl‐Pyrazol‐3‐yl)‐2,2′‐Bipyridine Terdentate Chelating Ligands: Synthesis,Characterization, and Luminescent Properties

A series of Pt^II complexes Pt(fpbpy)Cl ( 1 ), Pt(fpbpy)(OAc) ( 2 ), Pt(fpbpy)(NHCOMe) ( 3 ), Pt(fpbpy)(NHCOEt) ( 4 ), and [Pt(fpbpy)(NCMe)](BF₄) ( 5 ) with deprotonated 6‐(5‐trifluoromethyl‐pyrazol‐3‐yl)‐2,2′‐bipyridine terdentate ligand are prepared, among which 1 is converted to complexes 2 – 5 by a simple ligand substitution. Alternatively, acetamide complex 3 is prepared by hydrolysis of acetonitrile complex 5 , while the back conversion from 3 to 1 is regulated by the addition of HCl solution, showing the reaction sequence 1 → 5 → 3 → 1 . Multilayer OLED devices are successfully fabricated by using triphenyl‐(4‐(9‐phenyl‐9H‐fluoren‐9‐yl)phenyl) silane (TPSi‐F) as host material and with doping concentrations of 1 varying from 7 to 100 %. The electroluminescence showed a substantial red‐shifting versus the normal photoluminescence detected in solution. Moreover, at a doping concentration of 28 %, the device showed a saturated red luminescence with a maximum external quantum yield of 8.5 % at 20 mA cm^?2 and a peak luminescence of 47 543 cd m^?2 at 18.5 V.     

Host-guest interaction of Hoechst 34580 and Cucurbit[7]uril

To track nuclear dynamic processes by fluorescence imaging, nuclear stains should be highly fluorescent, resistant to photobleaching, and inert to nuclear processes. The nuclear stains of the Hoechst family, such as Hoechst 34580, show bright fluorescence only on groove binding to DNA, and therefore may interfere with visualization of nuclear dynamic processes induced by other stimuli. We study host-guest interactions between Hoechst 34580 and Cucurbit[7]uril (CB7) in aqueous solutions. The formation of CB7-Hoechst 34580 inclusion complexes with stoichiometry of 2:1 in water and 1:1 in phosphate-buffered saline (PBS) solution (pH 7.0) is confirmed by (1)H NMR, absorption spectra, fluorescence spectra, MALDI-TOF MS, and molecular modeling. Compared to Hoechst 34580, the inclusion complex exhibits redshifted absorption, intensified fluorescence, improved photostability, weakened DNA binding affinity, comparable ability to penetrate cell nuclei, and better nuclear-staining capability, and thus a new avenue for the application of cucurbituril in fluorescence imaging is opened.     

聚丙烯酸/聚氧化乙烯高分子复合溶液的结构与粘度

通过溶液折光指数和粘度测定,研究了聚丙烯酸（ＰＡＡ）与聚氧化乙烯（ＰＥＯ）高分子链间在复合溶液中的相互作用和ＰＡＡ／ＰＥＯ高分子氢键复合溶液的结构与粘度,研究了复合溶液粘度随溶液ｐＨ值的变化规律及不同浓度时剪切速率对复合溶液粘度和复合增粘效果的影响。结果表明：ＰＡＡ／ＰＥＯ复合溶液结构不同于ＰＡＡ和ＰＥＯ两组分聚合物溶液结构,ＰＡＡ与ＰＥＯ高分子链间的氢键相互作用形成构象更为伸展、流体力学体积列大     

Tetranuclear d-f Metallostars: Synthesis, Relaxometric, and Luminescent Properties

A novel ditopic ligand DTPA-ph-phen, based on 1,10-phenanthroline and diethylenetriaminepentaacetic acid (DTPA) units, has been designed and fully characterized by (1)H, (13)C, and 2D-COSY NMR spectroscopy, IR and electrospray ionization mass spectrometry (ESI-MS) techniques. The DTPA core of the ligand specifically binds Ln(III) ions (Ln = Eu, Gd) resulting in formation of the [Ln{DTPA-ph-phen}(H(2)O)](-) complex. The photophysical properties of the Eu(III) compound have been investigated, and the complex shows characteristic red luminescence with an overall quantum yield of 2.2%. Reaction of [Gd{DTPA-ph-phen}(H(2)O)](-) with Ru(II) leads to further self-assembly into a heterobimetallic metallostar complex containing Gd(III) and Ru(II) in a 3:1 ratio. This tetranuclear [(Gd{DTPA-ph-phen})(3)(H(2)O)(3)Ru](-) complex (Gd(3)Ru), formed by the coordination of Ru(II) to the 1,10-phenanthroline unit, has been characterized by a range of experimental techniques and evaluated toward its feasibility as a potential bimodal optical/MRI agent. The Gd(3)Ru metallostar shows intense metal-to-ligand charge transfer (MLCT) transition resulting in intense light absorption in the visible spectral region. Upon irradiation into this MLCT band at 450 nm, the Gd(3)Ru complex exhibits red broad-band luminescence in the range of 550-800 nm centered at 610 nm with a quantum yield of 4.8%. Proton nuclear magnetic relaxation dispersion (NMRD) measurements indicate that the Gd(3)Ru complex exhibits an enhanced relaxivity value r(1) of 36.0 s(-1) mM(-1) per metallostar molecule at 20 MHz and 310 K. The ability of the complex to noncovalently bind to human serum albumin (HSA) was investigated, but no significant interaction was detected.     

Reaction of an oxoiron(IV) complex with nitrogen monoxide: oxygen atom or oxide(•1-) ion transfer?

Reaction of [FeO(tmc)(OAc)](+) with the free radical nitrogen monoxide afforded a mixture of two Fe(II) complexes, [Fe(tmc)(OAc)](+) and [Fe(tmc)(ONO)](+) (where tmc = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane and AcO(-) = acetate anion). The amount of nitrite produced in this reaction (ca. 1 equiv with respect to Fe) was determined by ESI mass spectrometry after addition of (15)N-enriched NaNO(2). In contrast to oxygen atom transfer to PPh(3), the NO reaction of [FeO(tmc)(OAc)](+) proceeds through an Fe(III) intermediate that was identified by UV-vis-NIR spectroscopy and ESI mass spectrometry and whose decay is dependent on the concentration of methanol. The observations are consistent with a mechanism involving oxide(?1-) ion transfer from [FeO(tmc)(OAc)](+) to NO to form an Fe(III) complex and NO(2)(-), followed by reduction of the Fe(III) complex. Competitive binding of AcO(-) and NO(2)(-) to Fe(II) then leads to an equilibrium mixture of two Fe(II)(tmc) complexes. Evidence for the incorporation of oxygen from the oxoiron(IV) complex into NO(2)(-) was obtained from an (18)O-labeling experiment. The reported reaction serves as a synthetic example of the NO reactivity of biological oxoiron(IV) species, which has been proposed to have physiological functions such as inhibition of oxidative damage, enhancement of peroxidase activity, and NO scavenging.     

Structural characterization and luminescence behavior of a silver(I) 1D polymeric chain constructed via a Bridge with unusual 4,5-diazospirobifluorene and perchlorate

A new polymeric silver complex, [Ag(2)(L(2))(ClO(4))(2)] (L = 4,5-diazospirobifluorene), has been synthesized and shown to exhibit interesting luminescence properties in a single crystal. Structural analysis reveals a one-dimensional chain, which contains a [Ag(2)(L(2))](2+) dimer bridged with ClO(4)(-). The Ag...Ag distances are 2.776(1) and 4.575(1) A incorporated by two L ligands and by a ClO(4)(-) bridge, respectively.